Printer Friendly

epoxy wood repair.

For durable wood patches, you can't beat epoxy.

You can't top epoxy for permanent repairs to rotted wood. You mix it like cookie dough, mold it like modeling clay and, when it hardens, you carve and sand it just like wood. It sticks like crazy and is formulated to flex and move with the wood, so it won't crack and fall out like some wood fillers. It's too expensive to use for boards or moldings that are easily and cheaply replaced, but epoxy is the perfect fix for windowsills and door jambs that are difficult to remove, and for moldings that would be expensive to duplicate.

In this article, we'll show you how to mix, apply and shape epoxy wood filler to create a long-lasting repair on damaged or rotted wood. We're using a system of both liquid and putty-like epoxy made specifically for wood repair. The procedure we're demonstrating is for cosmetic repairs. If a structural (weight-bearing) member has been weakened by rot, you have to use other methods or in some cases special types of epoxy.

Once you learn a few tricks for mixing and applying the epoxy, you'll find it's as easy to use as Play-Doh. Most repairs will take only a few hours, using tools you probably already own. You'll need a hammer and chisel, a drill, and wood rasps and files, depending on your repair. Other materials and supplies are listed in the story.

Buying epoxy

The wood repair epoxy we're using is manufactured by Abatron. Other brands are available, but mixing and application procedures vary. Follow the manufacturer's instructions carefully. The Abatron system consists of two types of epoxy, a syrupy liquid consolidant and a putty-like wood paste filler. The liquid consolidant soaks into the wood fibers and hardens to form a solid base for the wood filler. As with any other epoxy, both the consolidant and wood filler consist of two parts, the resin (part A) and the hardener (part B). Mixing the two parts according to the manufacturer's instructions starts a chemical reaction that causes the epoxy to harden.

Abatron epoxy is available by mail order and at some large home centers. You can order Abatron products by phone (800-445-1754) or from the company's Web site (www.abatron.com). A kit containing two pints of consolidant, two pints of wood filler and one pint of solvent costs about $64. This kit makes enough epoxy paste to fill an 11 x 11-in. repair 1/2 in. deep. Search the Internet or see "Marine Equipment and Supplies" in the Yellow Pages to locate other sources of epoxy for wood repair.

If you're not careful, epoxy filler can make the problem worse

The first step in any repair is to find and stop the cause of the rot. Our column base had two problems. First, the column base was sitting directly on concrete where it could absorb moisture. We replaced the rotted base with a new one of rot-resistant redwood and placed a layer of galvanized sheet metal between the base and concrete to keep it from absorbing moisture.

The second problem we had was that the layer of paint meant to protect the wood was chipped and cracked, allowing water to soak in and rot the wood. Once it's been repaired, this type of decay is easy to prevent by maintaining the paint job. Other causes of rotting wood, like leaking gutters or missing or damaged metal flashing materials, may be more complicated.

If you're not sure what's causing the rot or how to repair it, call a building contractor or housing inspector for help. Even after you've corrected the problem, make sure you allow the wood plenty of time to dry throughout. This may take a week or longer. Otherwise, trapped moisture may cause additional rot or prevent the epoxy from bonding properly.

Epoxy won't bond well unless the wood is thoroughly dry

After you've located and corrected the cause of the rotted wood, start the repair by stripping off the old paint and gouging out all the decayed wood (Photo 2). Old paint may contain lead. For complete how-to information on lead paint removal, see "Handling Lead Paint Safely," July/Aug. '98, p. 67. (To order a copy, see p. 94.)

[ILLUSTRATION OMITTED]

Next drill a series of 1/4-in, holes spaced about 1 in. apart around the repair (Photo 3). Drill the holes as deep as possible without going all the way through the wood. The holes allow moisture to escape and later act as reservoirs for the consolidant as it soaks into the wood. If you accidentally drill all the way through the wood, plug the bottom of the hole with oil clay or painter's putty to prevent the consolidant from running out.

[ILLUSTRATION OMITTED]

Next, construct a loose-fitting plastic tent over the repair to protect it from rain and let it dry at least a week before proceeding. Uncover the repair on dry, sunny days to speed up the drying process.

Preparation and cleanliness are essential when you're working with epoxy

Once the wood is thoroughly dry, vacuum or blow the dust out of the repair area. Then start the epoxy repair by mixing and applying the consolidant (Photo 3).

Mixing the liquid epoxy consolidant in a squirt bottle (Photo 3) makes it easier to apply, and if it tips over, you'll only have a few drips to clean up. Graduated bottles like this are available for about $2 at beauty supply and woodworking supply stores.

Keep your work area clean and organized, and keep the area surrounding the repair covered with paper or dropcloths. Use disposable brushes, plastic putty knives and scraps of wood to minimize tool cleanup. Wear chemical-resistant rubber gloves to protect your skin. You'll need a powerful solvent like naphtha or a special solvent available from the manufacturer to clean up epoxy before it hardens. Minimize solvent use by cleaning up drips and spills right away with paper towels.

Epoxy's behavior is predictable, if not always desirable. If you inadvertently put cap A on container B, it will glue itself on. Label all the lids and mixing sticks to avoid confusing them and starting an unwanted reaction. Also, always use clean containers and mixing boards. Contaminating newly mixed epoxy with partially hardened epoxy can accelerate the reaction, leaving you less time to work.

You don't have to wait for the consolidant to harden completely before filling with the epoxy wood filler (Photos 4 - 7). Mix the epoxy filler (Photo 4) and use a stiff putty knife to work the first layer into the wood (Photo 5). At 70 degrees F, you'll have about 30 minutes before the epoxy starts to harden. The epoxy is formulated to allow enough working time under normal conditions, but temperature is the key factor. Heat accelerates the reaction; cold slows it down. Use this to your advantage. Work in the shade and keep the epoxy materials cool (about 70 degrees F) when you're mixing and applying the epoxy. Then if you want to speed up the hardening process, use a hair dryer or a spotlight to warm up the epoxy repair.

[ILLUSTRATIONS OMITTED]

You don't need fancy tools to shape the epoxy

Shape the epoxy with your fingers and by patting it with a scrap of wood. Don't try to get the shape perfect, and make sure to leave enough material to match the surrounding profiles. On warm days, the epoxy will be firm enough to start shaping in about three to four hours. In cool weather, allow the patch to harden overnight. If you can't dent the epoxy with your fingernail, it's hard enough to start filing. Once it hardens, epoxy is easy to shape and sand with standard woodworking tools. Start by roughing out the basic contour with a Surform plane or coarse rasp. Follow the shape of the surrounding wood. When you've ground off the major humps and the shape is beginning to emerge, start working on the details. Depending on the profile you're re-creating, you may need flat, round or half-round wood files or rasps, or wrap 80-grit sandpaper around a dowel or fold it around a stick and use this to grind out the shape. Use the profile of the surrounding wood to guide your tools as you gradually file away the epoxy. Fine-tune the shape and get rid of the sanding marks by sanding with 80-grit and then 120-grit sandpaper.

Don't worry if you file away too much epoxy or didn't use enough to begin with. Many repairs require a second application. Dust off the repair and mix and add more filler. To make a thinner filling material that's easier to apply, first mix a small amount of consolidant. Then mix a small batch of filler and add some of the consolidant to the filler to reach the desired consistency. If you're in a hurry to sand again after you touch up the repair, heat the new filler with a hair dryer to speed the hardening process.

Protected with a good paint job, your epoxy repair will probably outlast the surrounding wood.

1 PROBE the area surrounding the damaged wood with an awl or screwdriver to determine the extent of the rot. Soft, easily penetrated wood is rotten or beginning to decay and should either be removed (Photo 2) or reinforced with epoxy consolidant as shown in Photo 3.

2 GOUGE out all the rotted wood using a paint scraper, chisel or old screwdriver. Work back to solid wood if possible. Drill a series of 1/4-in. holes spaced about 1 in. apart to allow epoxy consolidant to soak into any water-damaged wood surrounding the repair (see Photo 3). On vertical surfaces, slope the holes slightly downward to form pockets for the consolidant. Don't drill all the way through the materiel.

3 MIX the two parts of consolidant according to the manufacturer's directions. Then squeeze the consolidant into the 1/4-in. holes and onto the wood in the repair area. Work it into the wood with a small disposable brush. Continue this process until the wood is saturated.

4 SCOOP equal golf ball-sized pieces of parts "A" and "B" of the epoxy wood filler onto a scrap of hardboard or plywood. Mix the two parts with a stiff putty knife for two to three minutes until they are completely blended. Label the lids and scooping sticks to avoid accidentally mixing parts A and B.

5 PRESS the putty-like epoxy filler into the repair area with a putty knife. Press hard to fill all voids and ensure a good bond.

6 SHAPE the epoxy with your fingers. Wear chemical-resistant rubber gloves. Overfill the repair to ensure enough extra for shaping (Photo 8).

7 PAT and press the soft epoxy filler to the approximate shape with a scrap of wood, adding filler as needed. Allow the epoxy to harden at least four hours and preferably overnight.

8 SHAPE the hardened epoxy with woodworking tools. Use a Surform plane or coarse rasp to remove large amounts of material and roughly shape the repair. Then use rasps, files and sandpaper to refine the shape and add details. If you remove too much or need to touch up the repair, add a layer of epoxy and repeat the process.

9 SMOOTH and fine-tune the epoxy repair with 80-grit sandpaper. When the shape is accurate, sand the repair and surrounding wood with 80-grit sandpaper, and finally with 120-grit sandpaper. Wear a dust mask and eye protection when you're sanding. Vacuum the dust from the repair and brush a coat of top-quality alkyd primer over the epoxy and surrounding bare wood. Finally, seal the joints between separate parts with polyurethane caulk before applying the final coats of finish.

10 SEAL the repair with alkyd primer and two coats of top-quality acrylic paint. Inspect the repaired area at least once a year and recaulk or repaint as necessary.

TIP

Don't waste epoxy when you're making large or deep repairs. Cut or carve blocks of wood to fill most of the cavity. Then use epoxy paste to glue the block in before covering it with additional paste filler. Use the same kind of wood for the repair and line up the grain in the same direction.

CAUTION: WHEN USING EPOXY SOLVENTS, WORK OUTDOORS IN A WELL-VENTILATED AREA, OR WEAR AN OSHA-APPROVED ORGANIC VAPOR RESPIRATOR WITH FRESH CARTRIDGES.

Buyer's Guide

The following companies manufacture epoxy products for wood repair. You can buy directly from the manufacturer or through special suppliers.

ABATRON INC.: (800) 445-1754. www.abatron.com HOUSECRAFT ASSOCIATES: (973) 579-1112. www.conservepoxy.com

TIPS

When you do the final sanding, make sure to rough up the surface of any hardened consolidant that may be coating the surrounding wood. Otherwise, the paint may not stick.
COPYRIGHT 2000 Home Service Publications, Inc.
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2000 Gale, Cengage Learning. All rights reserved.

Article Details
Printer friendly Cite/link Email Feedback
Author:Gorton, Jeff
Publication:The Family Handyman
Date:Dec 1, 2000
Words:2131
Previous Article:grab bars.
Next Article:Workshop tips.

Terms of use | Privacy policy | Copyright © 2021 Farlex, Inc. | Feedback | For webmasters |