Printer Friendly

Wood collection, conversion & drying.

AIR FILTERS

--See Pollution Control, Dust Collection

--See Pollution Control, VOC

AIR HANDLING SYSTEMS & EQUIPMENT

--See Pollution Control, Dust Collection

--See Pollution Control, VOC

ATTRITION MILLS

--See Chip, Flake, & Fiber Processing Equipment

BALING PRESSES

--See Utilization, Wood Waste

BIN & SILO UNLOADERS

Advanced Recycling Equipment

** Clarke's Sheet Metal Inc.

Con-Vey/Keystone Inc.

Decton Industrial Solid Fuel Heating Systems

Flying Dutchman Inc.

General Resource Corp.

** Honeyville Metal Inc.

Industrial Wood Products

Keith Mfg. Co.

Kinergy Corp.

** Koger/Air Corp.

Laidig Systems Inc.

Ohio Blow Pipe Co.

Siempelkamp Limited Partnership

Veneer Services

The Young Industries Inc.

BLOWERS

--Also See Pollution Control, Dust Collection

--Also See Pollution Control, VOC

Advanced Recycling Equipment

** Air Control Technology

Air Craftsmen Inc.

Air Systems Mfg. of Lenoir Inc.

Blower Application Co. Inc.

Boge America Inc.

Busch Inc.

** Clarke's Sheet Metal Inc.

Cornell Industrial Corp.

** Dantherm Filtration Inc.

Dustvent Inc.

** Eagle Machinery & Supply Inc.

Foust Metal Works Inc.

Gardner Denver Blower Division

General Mfg. Co. Ltd.

General Resource Corp.

** Honeyville Metal Inc.

ITW Air Management

** Kaeser Compressors Inc.

** Kraemer Tool & Mfg. Co. Ltd.

Makita U.S.A. Inc.

Murphy-Rodgers Inc.

Ohio Blow Pipe Co.

Paxton Products

Protectaire Systems Co.

Scheuch Inc.

Virginia Blower Co.

Western Pneumatics Inc.

BLOWPIPE SYSTEMS & PARTS

ABC Industries Inc.

Advanced Metal Fabricators, AMF Filtrex

Advanced Recycling Equipment

** Air Control Technology

Air Craftsmen Inc.

** Air Handling Systems

Air Systems Mfg. of Lenoir Inc.

Blower Application Co. Inc.

** Clarke's Sheet Metal Inc.

Dustvent Inc.

Foust Metal Works Inc.

** Honeyville Metal Inc.

IMAL North America Inc.

K & B Duct

** Koger/Air Corp.

Murphy-Rodgers Inc.

Ohio Blow Pipe Co.

Oneida Air Systems Inc.

Quickdraft

Rees-Memphis Inc.

Southern Pneumatics

Virginia Blower Co.

Western Pneumatics Inc.

WolfeAire Services Inc.

BOARD & PANEL COOLERS

Con-Vey/Keystone Inc.

Dieffenbacher GmbH + Co. KG

Globe Machine Mfg. Co.

Metso Paper

Raute Wood

Schmidt Industrial Services Inc.

Siempelkamp Limited Partnership

BOARD & PANEL DRYERS

--See Dryers

BOARD & PANEL FORMING

1 Cooling Chambers

2 Fiberizing Equipment

3 Formaldehyde Release Chamber

4 Mat Trim Saws

5 Particleboard Forming Machines

6 Predryers

7 Refiners

8 Release Sheets

9 Transfer Sheets

10 Vacuum Formers

Coe Mfg. Co. 6,9

Con-Vey/Keystone Inc. 1

Dieffenbacher GmbH + Co. KG 5

Dieffenbacher Inc., Sales Office 4,5

** European Woodworking Machinery Co. 10

Glenro Inc. 6

IMAL North America Inc. 5

Metso Paper 2,4,5,7,10

Pallmann Maschinenfabrik GmbH & Co. KG 7

Process Thermal Dynamics Inc. 6

** Quality VAKuum Products Inc. 10

Siempelkamp Limited Partnership 4,5

** Thermal Engineering Corp. 1

Western Pneumatics Inc. 1

BOILERS

Advanced Recycling Equipment

Biomass Combustion Systems

CHIPTEC Wood Energy Systems

Cleaver-Brooks

Hurst Boiler & Welding Co.

Industrial Wood Products

Reimers Electra Steam Inc.

USNR

BOILERS, WOODWASTE BURNING

Advanced Recycling Equipment

Biomass Combustion Systems

CHIPTEC Wood Energy Systems

Cleaver-Brooks

Combustion Service & Equipment Co.

Decton Industrial Solid Fuel Heating Systems

Hurst Boiler & Welding Co.

Industrial Wood Products

** The Ram Group Inc.

Resource Conservation Group

Talbott's Heating Ltd.

Thermal Fluid Systems Inc.

USNR

Wellons Inc.

BRIQUETTE MACHINES

--See Utilization, Wood Waste

BURNERS, REFUSE

--See Pollution Control, Dust Collection

--See Waste Disposal Systems & Equipment

CAUL & MAT HANDLING EQUIPMENT

Con-Vey/Keystone Inc.

Dieffenbacher GmbH + Co. KG

Keith Mfg. Co.

Metso Paper

Siempelkamp Limited Partnership

CHEMICAL ADDITIVES, HARDBOARD AND LOW DENSITY BOARD

ACMOS Inc.

Air Products and Chemicals Inc.

CHIP HANDLING EQUIPMENT

ABC Industries Inc.

Advanced Metal Fabricators, AMF Filtrex

Advanced Recycling Equipment

CHIPTEC Wood Energy Systems

** Clarke's Sheet Metal Inc.

Coe Mfg. Co.

Con-Vey/Keystone Inc.

Cornell Industrial Corp.

FMC Technologies Inc.

Fuji Kogyo Co. Ltd.

General Resource Corp.

** Honeyville Metal Inc.

ITW Air Management

Keith Mfg. Co.

Metso Paper

** Nordfab

Ohio Blow Pipe Co.

Paxton Products

Profile Technology Inc.

Quickdraft

USNR

CHIP, FLAKE, & FIBER PROCESSING EQUIPMENT

1 Attrition Mills

2 Chip Screens

3 Continuous Dewatering Presses

4 Digesters

5 Flake Classifiers

6 Platen Type Dewatering Presses

7 Refiners

8 Separators

Advanced Recycling Equipment 8

Bolton Emerson Americas Inc. 7

Coe Mfg. Co. 1

Hosokawa Micron Powder Systems 1,5

Ingersoll-Rand Co. 3

Kinergy Corp. 2

Nicholson Mfg. Co. 2

Ohio Blow Pipe Co. 8

Pallmann Maschinenfabrik GmbH & Co. KG 7

Pallmann Pulverizers Co. Inc. 1,7

Ruwac USA 8

Scheuch Inc. 2

Schutte-Buffalo Hammer Mill 1

Siempelkamp Limited Partnership 6

Solberg Filtration Solutions 8

TMS--Woodland 2

USNR 2

Veneer Services 2

** West Salem Machinery Co. 2,5

The Young Industries Inc. 1

CHIP, FLAKE, & FIBER PROCESSING EQUIPMENT, VIBRATING SCREENS

--See Vibrating Screens

CHIP, FLAKE, PARTICLE DRYERS

--See Dryers

CHIPPERS

1 Portable

2 Veneer

3 Wood

Advanced Recycling Equipment 2,3

Arasmith Mfg. Co. Inc. 1,3

Fezer North America Inc. 2,3

Fuji Kogyo Co. Ltd. 3

Industrial Wood Products 1

Ingersoll-Rand Co. 1

Jeffrey Specialty Equipment Corp. 3

Lozier Machinery Inc. 2

MLS Machinery Inc. 2,3

B. Maier Zerkleinerungstechnik GMBH 2,3

Metso Paper 3

Nicholson Mfg. Co. 3

Nitto Kohki U.S.A. Inc. 1

Pallmann Maschinenfabrik GmbH & Co. KG 2,3

Pallmann Pulverizers Co. Inc. 3

Schmidt Industrial Services Inc. 3

USNR 3

Vecoplan LLC 2,3

Veneer Services 2,3

Veneer Systems Inc. 2

** Weima America Inc. 3

** West Salem Machinery Co. 2,3

Williams Patent Crusher & Pulverizer 3

CLIPPERS VENEER

--See Veneering Equipment

DEHUMIDIFICATION DRYING SYSTEMS

Bry-Air Inc.

Ebac Lumber Dryers

J.B. Products

MLS Machinery Inc.

Optimum Air Corp.

** Thermal Engineering Corp.

DEWATERING PRESSES, CONTINUOUS

--See Chip, Flake, & Fiber Processing Equipment

DIGESTERS

--See Chip, Flake, & Fiber Processing Equipment

DRY KILN DOORS & CARRIERS

American Wood Dryers Inc.

Coe Mfg. Co.

Kiln Drying Systems & Components (KDS)

Nyle Dry Kiln Systems

SII Dry Kilns

USNR

Wellons Inc.

DRY KILN SEALERS

American Wood Dryers Inc.

Pace Products Inc.

SII Dry Kilns

USNR

DRY KILNS

** AWMV Industrial Products

American Wood Dryers Inc.

Bry-Air Inc.

Coe Mfg. Co.

Coral SpA

** Eagle Machinery & Supply Inc.

Ebac Lumber Dryers

Eisenmann Corp.

HeatWave Technologies Inc.

Industrial Wood Products

Kiln Drying Systems & Components (KDS)

Koetter Dry Kiln Inc.

** Lignomat USA Ltd.

MLS Machinery Inc.

Nyle Dry Kiln Systems

Pentec International Inc.

SII Dry Kilns

USNR

Vacutherm Inc.

Wellons Inc.

DRY KILNS, DEHUMIDIFICATION

** AWMV Industrial Products

Bry-Air Inc.

Ebac Lumber Dryers

** Lignomat USA Ltd.

MLS Machinery Inc.

Nyle Dry Kiln Systems

DRY KILNS, LUMBER PRE-DRYERS

American Wood Dryers Inc.

Kiln Drying Systems & Components (KDS)

** Lignomat USA Ltd.

MLS Machinery Inc.

SII Dry Kilns

USNR

DRY KILNS, PREFABRICATED

American Wood Dryers Inc.

Coe Mfg. Co.

Kiln Drying Systems & Components (KDS)

Koetter Dry Kiln Inc.

** Lignomat USA Ltd.

SII Dry Kilns

USNR

Wellons Inc.

DRYER FEEDERS & UNLOADERS, VENEER

--See Veneering Equipment

DRYERS

1 Board, Panel

2 Chip, Flake, Particle

Coe Mfg. Co. 1,2

Dieffenbacher GmbH + Co. KG 1

Eisenmann Corp. 1

Glenro Inc. 1

HeatWave Technologies Inc. 1,2

Infratrol Mfg. Corp. 1

George Koch Sons 2

C.A. Litzler Co. Inc. 1,2

M-E-C Co. 1,2

Nemeth Engineering Assoc. Inc. 2

PSC Inc. 1,2

Process Thermal Dynamics Inc. 1

Richardson Electronics Ltd. 2

** Superfici America Inc. 1

** Thermal Engineering Corp. 1

DRYERS, VENEER

--See Veneering Equipment

DUCTS, FLEXIBLE

ABC Industries Inc.

** Air Handling Systems

** American Fabric Filter Co.

Rudolf Bass Inc.

Bruning & Federle Mfg. Co.

Coral SpA

Dustvent Inc.

Federal Hose Mfg. Inc.

The Flexaust Co.

Hi-Tech Duravent

Imperial Systems Inc.

K & B Duct

KEI

Masterduct

** NordFab

Ohio Blow Pipe Co.

** Omga Inc.

** Sifter Parts & Service

Woodworker's Supply Inc.

DUST COLLECTING SYSTEMS & EQUIPMENT

--See Pollution Control, Dust Collection

EXHAUST SYSTEMS & EQUIPMENT

Advanced Metal Fabricators, AMF Filtrex

** Air Control Technology

Air Craftsmen Inc.

** Air Handling Systems

Air Systems Mfg. of Lenoir Inc.

Bessam-Aire Inc.

** Clarke's Sheet Metal Inc.

Coe Mfg. Co.

Columbus Industries Inc.

** Dantherm Filtration Inc.

Dustvent Inc.

Eisenmann Corp.

The Flexaust Co.

Foust Metal Works Inc.

General Resource Corp.

** Global Finishing Solutions

Hi-Tech Duravent

ITW Air Management

KEI

** Koger/Air Corp.

MAC Equipment

MikroPul

** Nordfab

Ohio Blow Pipe Co.

Paxton Products

** Pistorius Machine Co.

Protectaire Systems Co.

Quickdraft

RoTool

Scheuch Inc.

Yadkin Valley Mechanical Inc.

FANS

--Also See Pollution Control, Dust Collection

** Air Control Technology

American Wood Dryers Inc.

Bruning & Federle Mfg. Co.

** Clarke's Sheet Metal Inc.

Coe Mfg. Co.

** Dantherm Filtration Inc.

Dustvent Inc.

Foust Metal Works Inc.

General Resource Corp.

** Honeyville Metal Inc.

K & B Duct

Ohio Blow Pipe Co.

Protectaire Systems Co.

Scheuch Inc.

Yadkin Valley Mechanical Inc.

FEEDERS & UNLOADERS, VENEER DRYER

--See Veneering Equipment

FEEDERS, CHIP, FLAKE & PARTICLE

** Clarke's Sheet Metal Inc.

Con-Vey/Keystone Inc.

FMC Technologies Inc.

Flying Dutchman Inc.

Jeffrey Specialty Equipment Corp.

Keith Mfg. Co.

Kinergy Corp.

Western Pneumatics Inc.

FILTERS, AIR

--See Pollution Control, Dust Collection

--See Pollution Control, VOC

FLAKE, CHIP, & PARTICLE DRYERS

--See Dryers

FLAKING MACHINES

Arasmith Mfg. Co. Inc.

B. Maier Zerkleinerungstechnik GMBH

Pallmann Maschinenfabrik GmbH & Co. KG

Pallmann Pulverizers Co. Inc.

FLY ASH COLLECTORS

** Dantherm Filtration Inc.

Fisher-Klosterman Inc.

General Resource Corp.

MAC Equipment

Murphy-Rodgers Inc.

Resource Conservation Group

Wheelabrator Air Pollution Control Inc.

FURNACES, WOODBURNING

Advanced Recycling Equipment

Belfab Inc.

Biomass Combustion Systems

CHIPTEC Wood Energy Systems

Decton Industrial Solid Fuel Heating

Systems

Industrial Wood Products

Thermal Fluid Systems Inc.

Wellons Inc.

HEAT RECOVERY SYSTEMS

Advanced Recycling Equipment

Adwest Technologies Inc.

Air Preheater Co.

American Wood Dryers Inc.

Anguil Environmental Systems Inc.

Boge America Inc.

Bry-Air Inc.

Cleaver-Brooks

** Dantherm Filtration Inc.

General Resource Corp.

** Kaeser Compressors Inc.

Monsanto Enviro-Chem Systems

Nyle Dry Kiln Systems

Pneu-Mech Systems Mfg. Inc.

Protectaire Systems Co.

Resource Conservation Group

Sullair Corp.

Thermal Fluid Systems Inc.

Wellons Inc.

Western Pneumatics Inc.

Yadkin Valley Mechanical Inc.

KILNS & EQUIPMENT

--See Dry Kilns

LATHE CHARGERS

--See Veneering Equipment

LATHES, CORE

--See Veneering Equipment

LATHES, VENEER

--See Veneering Equipment

MACHINES, VENEER

--See Veneering Equipment

MAT & CAUL HANDLING EQUIPMENT

--See Caul & Mat Handling Equipment

MOISTURE DETECTORS

Abbeon Cal. Inc.

Akhurst Machinery

** Delmhorst Instrument Co.

Electronic Wood Systems International

** GreCon Inc.

IMAL North America Inc.

Industrial Solutions Int'l.

** Lignomat USA Ltd.

McCarthy Products Co.

Merlin Technology GmbH

Moisture Register Products

SII Dry Kilns

USNR

Wagner Electronic Products Inc.

MOISTURE METERS

Abbeon Cal Inc.

Akhurst Machinery

Conway-Cleveland Corp.

** Delmhorst Instrument Co.

Electronic Wood Systems International

Electrophysics

Forestry Suppliers Inc.

** GreCon Inc.

Grecon

** Grizzly Industrial Inc.

IMAL North America Inc.

Industrial Solutions Int'l.

Lee Valley Tools Ltd.

** Lignomat USA Ltd.

McCarthy Products Co.

Merlin Technology GmbH

Moisture Register Products

Nyle Dry Kiln Systems

SII Dry Kilns

USNR

Veneer Systems Inc.

Wagner Electronic Products Inc.

Wellons Inc.

PANEL & BOARD DRYERS

--See Dryers

PANEL COOLERS

--See Board & Panel Coolers

PANEL MACHINES

--See Board & Panel Forming

PARTICLE, CHIP, FLAKE DRYERS

--See Dryers

PATCHERS, VENEER

--See Veneering Equipment

PLYWOOD BLISTER DETECTORS

--See Blister Detectors

PLYWOOD LAYUP SYSTEMS

Burelbach Industries Corp.

Burkle North America Inc.

Globe Machine Mfg. Co.

Heinrich Kuper GmbH & Co KG

Micro Air

Simimpianti srl

POLLUTION CONTROL, AIR, SERVICES

--See Services, Certification & Testing

POLLUTION CONTROL, DUST COLLECTION

1 Air Filters

2 Air Handling Systems & Eqpt.

3 Blowers, Fan

4 Detection Devices

5 Down Draft Benches, Tables

6 Dust Collecting Systems & Equipment

7 Dust Incinerators

8 Dust Protectors

9 Mist Collectors

10 Rotary Air Lock

11 Scrubbers

12 Spark Arrestor Systems

AAF International 6

ABC Industries Inc. 6

AIRLANCO 1,2,3,6,10

APEL International Inc. 1,2,5,6,7,9

Advanced Metal Fabricators, AMF Filtrex 6

Advanced Recycling Equipment 2,3,7,10

Adwest Technologies Inc. 7,11

Aget Mfg. Co. 6

** Air Control Technology 1,2,3,5,6,9,10,11,12

Air Craftsmen Inc. 6

** Air Handling Systems 2,3,6

Air Systems Mfg. of Lenoir Inc. 1,2,3,6,10

Airborne Environmental Systems 2,3,6,10

AireWorks 2,3,6,10

Airflow Systems Inc. 1,3,5,6

Airguard 1

Akhurst Machinery 5,6

** American Fabric Filter Co. 1,6

Argus Fire Control 12

** Atlantic Machinery Corp. 5,6,10

Automation Products Inc. 6

Rudolf Bass Inc. 6

Belfab Inc. 5,6,10,12

Boge America Inc. 3

Boshco Inc. 6

Bruning & Federle Mfg. Co. 1,2,3,6,10

** Richard T. Byrnes Co. Inc. 2,6

The CMM Group 6

** CTD Machines Inc. 6

Chemco Mfg. Co. Inc. 1,6,12

Clarke's Sheet Metal Inc. 1,2,3,6,10,12

Coral SpA 1,2,3,5,6

** Dantherm Filtration Inc. 1,2,6,10

Delta Machinery 6

** Denray Machine Inc. 5,6

Dirt Bag Inc. 8

Donaldson Torit 1,2,5,6,9

Duskits LLC 5

Dustek 6

Dustex Corp. 1,2,6

Dustvent Inc. 1,2,5,6,9,10

Eagle America 1

Ecogate Inc. 2,6,9

Eurofilter USA 1

Eurovac Inc. 1,6

EX-FACTORY INC. 6

Farr Air Polution Control 1,2,6,9

Federal Hose Mfg. Inc. 6

Fein Power Tools Inc. 6

Fetder USA 6

Festool USA 6

Fisher-Klosterman Inc. 2,6,9,11,12

Flamex Inc. 6,12

The Flexaust Co. 2,6

Flying Dutchman Inc. 6

Format-4 USA 6

Foust Metal Works Inc. 1,2,3,5,6,10

Gardner Denver Blower Division 3,6

** General International 1,6

General Resource Corp. 6,10

** Global Finishing Solutions 6

** GreCon Inc. 12

Griffin Environmental Co. Inc. 1,2,3,6

** Grizzly Industrial Inc. 1,6

Hansentek 4,12

Hi-Tech Duravent 2,6

** Honeyville Metal Inc. 1,3,5,6,10

IAC-Industrial Accessories Co. 2,6

ITW Air Management 6

Imperial Systems Inc. 2

Industrial Wood Products 10

Island Clean Air Inc. 1,2,5,6

JDS Co. 1,6

K & B Duct 3,6,11

KEI 5,6,12

** Kaeser Compressors Inc. 3

** Koger/Air Corp. 2,6,10

** Kraemer Tool & Mfg. Co. Ltd. 1,2,5,6,10

Kufo Industries Corp. 6

Laguna Tools 6

** Lobo Machinery Corp. 6

Louisville Woodworking Machinery Co. 6

MAC Equipment 1,2,3,6,9,10

MLS Machinery Inc. 5,6

Micro Air 1,5,6,9,12

** Midwest Automation 6

MikroPul 1,2,6,9,10,11

ModuFil Inc. 1,2,5,6

Monsanto Enviro-Chem Systems 9,11

Montgomery Ind. International 3

Murphy-Rodgers Inc. 3,5,6,10

NAM Rep 5

** Nordfab 6

Novaflex Hose 2

Ohio Blow Pipe Co. 6,10

Oliver Machinery Co. 6

Oneida Air Systems Inc. 1,2,3,6

Paxton Products 2,6

Penn State Industries 1,3,6

** Pistorius Machine Co. 6

Plant Maintenance Direct 1

** Powermatic 1,2,6

Premier Pneumatics Inc. 6

Protectaire Systems Co. 1,2,3

** The Ram Group Inc. 6

Rees-Memphis Inc. 6,10

Resource Conservation Group 1,2,3,4,6,7,9,10,11,12

Ruwac USA 3,6

** Safety Speed Cut Mfg. Co. Inc. 6

** SandMan Products 5

Scheuch Inc. 1,2,3,6,11

Schmidt Industrial Services Inc. 2,6

Scientific Dust Collectors 1,2,5,6,10

Select Machinery Inc. 5,6

** Sifter Parts & Service 1,6

** Simantech Inc. 6

Solberg Filtration Solutions 1,9

Southern Pneumatics 4,6,10,12

** Steel City Tool Works 1,6

Sternvent Co. Inc. 6

Sunhill Machinery 6

TSM Inc./Pacific Wood Technology 4

Tennant Co. 11

Total Clean Air Systems Inc. 2,6

U.V. Process Supply Inc. 6

Uni-Ram Corp. 6

United Air Specialists Inc. 1,5,6,9

Virginia Blower Co. 1,3,5,6,9,10

WMH Tool Group 6

Wellons Inc. 6

Western Pneumatics Inc. 1,2,3,4,6,10,12

Wheelabrator Air Pollution Control Inc. 6

W.C. Wiedenmann & Son Inc. 5,6,10

Wilke Machinery Co. Inc. 6

Wolfe Machinery Co. 6

WolfeAire Services Inc. 1,2,6,10

Woodstock International Inc. 6

Woodworker's Supply Inc. 1,2,6

Yadkin Valley Mechanical Inc. 1,2,3,5,6

The Young Industries Inc. 6,10

POLLUTION CONTROL, WATER

1 Descaling Systems

2 Detection Devices

3 Filters

4 Incineration, Sludge

5 Sludge Dewatering

** American Fabric Filter Co. 3

Automation Products Inc. 2

Eisenmann Corp. 3,4,5

George Koch Sons 5

Protectaire Systems Co. 3

** Sifter Parts & Service 3

Van Air Systems Inc. 3

Western Pneumatics Inc. 3

POLLUTION CONTROL, WATER, SERVICES

--See Services, Certification & Testing

PORTABLE CHIPPERS

--See Chippers

REELING & UNREELING SYSTEMS, VENEER

--See Veneering Equipment

REFINERS

--See Chip, Flake, & Fiber Processing Equipment

REFUSE BURNERS

--See Pollution Control, Dust Collection

SAWDUST BALING SYSTEMS

Ohio Blow Pipe Co.

SCREENS

--See Vibrating Screens

SCRUBBERS

--See Pollution Control, Dust Collection

SEPARATORS

--See Chip, Flake, & Fiber Processing Equipment

SILO UNLOADERS

--See Bin & Silo Unloaders

SILOS, STORAGE

Air Craftsmen Inc.

Decton Industrial Solid Fuel Heating Systems

Flying Dutchman Inc.

General Resource Corp.

** Honeyville Metal Inc.

IMAL North America Inc.

Industrial Wood Products

** Koger/Air Corp.

Laidig Systems Inc.

Ohio Blow Pipe Co.

Sollenberger Silos Corp.

Talbott's Heating Ltd.

Veneer Services

Wellons Inc.

Western Pneumatics Inc.

The Young Industries Inc.

SLICERS, VENEER

--See Veneering Equipment

SORTING, STACKING EQUIPMENT, VENEER

--See Veneering Equipment

SPLICERS, VENEER

--See Veneering Equipment

STOKERS, WOODBURNING

Advanced Recycling Equipment

CHIPTEC Wood Energy Systems

Combustion Service & Equipment Co.

Decton Industrial Solid Fuel Heating Systems

Hot Tools

Hurst Boiler & Welding Co.

Industrial Wood Products

Resource Conservation Group

Talbott's Heating Ltd.

Thermal Fluid Systems Inc.

TAPELESS SPLICERS, VENEER

--See Veneering Equipment

TAPER & MATCHERS, VENEER

--See Veneering Equipment

UNLOADERS & FEEDERS, VENEER DRYER

--See Veneering Equipment

UNLOADERS, SILO & BIN

--See Bin & Silo Unloaders

UNREELING & REELING SYSTEMS, VENEER

--See Veneering Equipment

UTILIZATION, WOOD WASTE

1 Ash Separators

2 Balers

3 Bark Dryers

4 Bark Processing Systems & Equipment

5 Briquette Machines

6 Buckets & Hoppers, Woodwaste Handling

7 Compressed Wood Log Machines

8 Disposal Systems & Equipment

9 Electrical Generating

10 Firewood Processing Systems

11 Fluidized Bed Combustion Systems

12 Hammermill Parts and Accessories

13 Hogs, Hammermills

14 Live Bottom Dischargers

15 Pellet Mill Parts and Accessories

16 Pelletizing Facilities

17 Pulverizers, Grinders, Shredders, Flakers

18 Screeners & Scalpers

19 Storage Facilities

20 Suspension Burner Systems

21 Wood Residue Use Systems

22 Wood Splitters

23 Woodwaste Materials Handling & Unloading Systems

ARTX Limited 8

Advance Lifts Inc. 17

Advanced Metal Fabricators, AMF Filtrex 23

Advanced Recycling Equipment 13,17,21,23

Air Systems Mfg. of Lenoir Inc. 23

** American Pulverizer Co. 4,12,13,17

Arasmith Mfg. Co. Inc. 13,17

Automated Lumber Handling 23

** Baker Products 6,7,22

Biomass Combustion Systems 21

Blower Application Co. Inc. 17

Bruning & Federle Mfg. Co. 23

Burelbach Industries Corp. 23

CHIPTEC Wood Energy Systems 6,9,23

CMM 7

Capital Machines International 13

Carter Day International 12,13,17,23

** Clarke's Sheet Metal Inc. 13,14,18,19,21,23

Cleaver-Brooks 20

Coe Mfg. Co. 4

Con-Vey/Keystone Inc. 23

Coral SpA 19

Cornell Industrial Corp. 4,22

** Cresswood Recycling Systems 8,13,17,23

Decton Industrial Solid Fuel Heating Systems 19,23

ESCO Corp. 12

Eurohansa Inc. 4,13,17

** Flamex Inc. 23

Flying Dutchman Inc. 6,8,14,19,21,23

Forest Tool Co. 4,12,13

Foust Metal Works Inc. 23

Fuji Kogyo Co. Ltd. 8,13,17

General Resource Corp. 23

Globe Machine Mfg. Co. 13

Hosokawa Micron Powder Systems 12,17

Hurst Boiler & Welding Co. 21

Industrial Wood Products 17,19,23

Jeffrey Specialty Equipment Corp, 4,12,13,17

Keith Mfg. Co. 14,23

Kiln Drying Systems & Components (KDS) 20

Kinergy Corp. 14,18,23

** Koger/Air Corp. 23

Laidig Systems Inc. 19,23

Louisville Woodworking Machinery Co. 13

M-E-C Co. 3,21

MLS Machinery Inc. 5,13,17

B. Maier Zerkleinerungstechnik GMBH 13,17

Manufacturers Consultants Inc. 5,7,16,21

Marathon Equipment Co. 2,8

Mellott Mfg. Co. Inc. 4

Mid-Oregon Group 13

MikroPul 5

Monarch Machinery Inc. 13

Montgomery Ind. International 8,12,13,17

Murphy-Rodgers Inc. 14

Nicholson Mfg. Co. 18

** Nordfab 8,23

Ohio Blow Pipe Co. 2,13,19,23

Pallmann Maschinenfabrik GmbH & Co. KG 4,12,13,17

Pallmann Pulverizers Co. Inc. 4,12,13,17

** The Ram Group Inc. 17,20,23

Reef Industries Inc. 19

Resource Conservation Group 8,17,21,23

Schutte-Buffalo Hammer Mill 4,12,13,17

Sollenberger Silos Corp. 19

Stedman 4,12,13,17

TMS--Woodland 12

TSM Inc./Pacific Wood Technology 5,17

Talbott's Heating Ltd. 21

Thermal Fluid Systems Inc. 11,20,21

Tryco/Untha 4,8,17,21

Turbosteam Corp. 9

Vecoplan LLC 13,17,23

Vibrotech Inc. 11,13,17,18

** Weima America Inc. 5,17,23

Wellons Inc. 9,19,21,23

** West Salem Machinery Co. 4,13,17,18

Western Pneumatics Inc. 8,14,16,18,19,23

Williams Patent Crusher & Pulverizer 3,4,12,13,17,18

WolfeAire Services Inc. 23

VENEERING EQUIPMENT, CHIPPERS

--See Chippers

VENEERING EQUIPMENT, KNIVES

--See Knives

VIBRATING SCREENS

FMC Technologies Inc.

Fuji Kogyo Co. Ltd.

Hustler Conveyor Co.

Kinergy Corp.

Nicholson Mfg. Co.

USNR

WOOD CHIPPERS

--See Chippers

WOODBURNING STOKERS

--See Stokers, Woodburning

WOODWASTE UTILIZATION

--See Utilization, Wood Waste
DUST COLLECTION REFERENCE GUIDE

Type       Model Name/No.           Size Range

AAF International, P.O. Box 35690, Louisville, KY 40232
Tel: (800) 477-1214 Fax: (800) 254-3019

1, 3       ArrestAll                Small

1,2,3,4    OptiFlo                  Small, medium, large

1,3,4      "M" FabriPulse           Small, medium

1,2, 3,4   "C" FabriPulse           Medium, large

Advanced Recycling Equipment Inc., 850 Washington Road, St. Mary's,
PA 15857 Tel: (814) 834-4470 Fax: (814) 834-3483

3          Challenger Hopper Feed   Rotor Diameter 10" - 22"
           Grinders CG 200-CG1000   Rotor Length 13" - 10'
           Gravity feed grinders    feed widths 13" - 128"
           CGG100 and CGG200

3          Challenger Horizontal    Rotor Diameter 10" - 22"
           Feed Grinders CH         Rotor length 13" - 78"
           100 - 600                Infeed opening 3 1/2 - 7 1/2

3          Challenger Slab/Pallet   Rotor diameter 18" - 22"
           Horizontal grinder       Rotor length 26" - 75"
           CHSP200 - CHSP600        Infeed opening 7 1/2 - 10"

Adwest Technologies Inc., 151 Trapping Brook Road, Wellsville, N.Y.
14895-9465 Tel: (585) 593-1405 Fax: (585) 593-6614

4          Retox RTO                1,000 - 65,000 SCFM

Aget Mfg. Co., P.O. Box 248, Adrian, MI 49221 Tel: (800) 832-2438
Fax: (517) 263-7154

3          DB Series                Small

3          Dustkop Cyclone Push-    1/3-75 hp
           Through

3          Dustkop Cyclone Pull-    2-20 hp
           Through

3, 4       FT Series After          Small-large
           Filters

3, 4       FT-S Series After        2-20 hp
           Filters

3, 4       FH Series Filterkop      Med-X large

1          RV Series Rotary         18"-12"
           Valves

3          DDT Downdraft Table      12 standard sizes
           Series

Air Craftsmen Inc., P.O. Box 2093, Lexington, NC 27293
Tel: (336) 248-5777 Fax: (336) 248-2460

1,2,3,4    Filtration               To suit application

4          TRM Dust Collector       11,000 - 10,000 cfm

1          Piping/Ductwork          3" - 24"

** Air Control Technology, 3636 Hawkestone Road, Mississauga, ON,
Canada L5C 2V2 Tel: (905) 949-4747 Fax: (905) 949-0886

1,2,3,4    ACT Model SPC            All

1,2,3,4    Model RPB Round Pulse    All
           Bag

1,2,3,4    Round Reverse Air &      All
           Shaker Bag

1,2,3,4    Square Pulse Bag         All

** Air Handling Systems, 5 Lunar Drive, Woodbridge, CT 06525-2320
Tel: (203) 389-9595 or (800) 367-3828 Fax: (203) 389-8340

1, 3       Dust Collection          3" - 42"
           Components

Air Systems Mfg. P.O. Box 1736, Lenoir, NC 28645
Tel: (828) 757-3500 Fax: (828) 758-5178

1, 3, 4    Filtration               Unlimited

3          High efficiency dust     700 - 7,500 cfm
           collector

AireWorks, 11421 Kiley Drive, Huntley, IL 60142 Tel: (847) 961-5656
Fax: (847) 666-9197

3                                   3 hp/ 5 hp

3                                   7.5 hp/ 10 hp

3                                   15 hp/ 20 hp

3                                   25 hp

3                                   3 hp/ 7.5 hp/ 15 hp

Airflow Systems Inc., 11221 Pagemill Road, Dallas, TX 75243
Tel: (214) 503-8008 Fax: (214) 503-9596

4          Dust-PAK                 100-6,000 cfm

4          V-Series Hi-Vacuum       0-200 cfm

4          F-Series                 1,000-4,000 cfm

** American Fabric Filter, 29807 State Road 54, Wesley Chapel, FL 33543
Tel: (800) 367-3591 Fax: (813) 991-9700

3

3          custom accessories       unlimited

** Atlantic Machinery Corp., 36 South End Plaza, New Milford,
CT 06776 Tel: (860) 354-7200 Fax: (860) 354-0315

3          Coral CLEN               3 hp, single bag, single phase

3          Coral CA/1C              1-3 hp, single bag
                 CA/2C              3-4 hp, two bag

3          Coral CA/3C              4-5.5 three bag
                 CA/4C              7.5 hp four bag

3          Coral AF/2C              5.5 hp, two bag

3          Coral AF/4C              7.5 hp, four bag

3          Coral FN/NA, FN/NB       7.5 - 30 hp

4          Coral Cartridge          Fit Coral CA and AF models;
           Filters                  fit most U.S portable collect.

3          Coral MECMODUL           30 to 100 hp

3          Super 5                  10 hp, five bags

3          Eurofilter 100           2 hp, single bag

3          Eurofilter 160           3 hp, two bags

3          Eurofilter 200           5.5 hp, four bags

Bruning & Federle Mfg. Co., P.O. Box 5547, Statesville, NC 28687
Tel: (704) 873-7237 Fax: (704) 878-0647

1, 3                                Unlimited

** CTD Machines Inc., 2300 E. 11th St., Los Angeles, CA 90021
Tel: (213) 689-445 Fax: (213) 689-1255

3          DC 3000                  3 hp

** Clarke's Sheet Metal Inc., 660 Conger, P.O. Box 2428, Eugene, OR
97402 Tel: (541) 343-3395 Fax: (541) 345-1447

4          Pneu-Aire Filter         To: 70,000 CFM

2          Pyroguard Spark          Up to 79" duct
           Detection &
           Suppression System

** Cresswood Recycling Systems, 55. W. Lincoln Hwy., Cortland, IL 60112
Tel: (800) 962-7302 or (815) 758-7171 Fax: (815) 758-0733

3          EF-24A (30, 40, 50 HP)   5" x 24"

3          LR-30 (60, 75, 100 HP)   7.5" x 30"

3          EF-36A (50, 60 HP)       5" x 36"

           EF-50                    7.5" x 50"

           EF-60 (75, 100,          7.5" x 60"
           125 HP)

3          EF-72 (75, 100,          7.5" x 72"
           125 HP)

3          HF-36 (30, 50 HP)        1.5 or 3 yd capacity hopper

3          HF-40 (40, 50, 75 HP)    1.5 or 3 yd capacity hopper

3          HF-50 (50, 60, 75 HP)    13 yd or 5 yd capacity hopper

3          HF-60 (60,75, 100 HP)    4 yd or 6 yd capacity hopper

** Danatherm Filtration, 102 Transit Ave., P.O. Box 429, Thomasville,
NC 27361-0429 Tel: (800) 533-5286 Fax: (336) 821-0890

1          Clean sweep filters      7.5 hp to 50 hp

1          Storage silos            13" dia.-30" dia.
           Clean Sweep Cyclones

4          Bag House

** Denray Machine Inc., 10775 Lawrence, Road 1140, Mt. Vernon,
MO 65712 Tel: (800) 766-8263 or (417) 466-4046 Fax: (417) 466-2394

3          Downdraft dust table     28"W x 72"L
           #2872B, 7200B. 9600B,    48"W x 72"L
           4896LP                   48" x 96"
           2634B, 3000-OH-
           Overhead

3          2800 through 9600        28"W x 48"L
                                    to 48"W x 96"L

3          Dust Booths              10'x10', 12', 14 & custom sizes

3          Backdraft Units          3 hp, 1 or 3 ph

Donaldson Torit, 1400 W. 94th St., Minneapolis, MN 55431
Tel: (800) 365-1331 Fax: (952) 887-3608

3          RF Baghouse              Wide range

3          Dalamatic                Wide range

3          Environmental Control    Wide range
           Booth

3          Cyclones                 Wide range

3          Unimaster Bag            Wide range

Dustek -- Div. of Boshco, 144-A Rangeway Road, N. Billerica,
MA 01862 Tel: (978) 667-1911 or (800) 442-4430 Fax: (978) 671-0011

3          C300                     3 hp
3          C500                     5 hp

3          C750                     7.5 hp

3          C1000                    10 hp

3          C1500                    15 hp

3          C2000                    20 hp

3          W750                     7.5 hp

3          W1000                    10 hp

3          W1500, W2000             15 hp/ 20 hp

3          W2500                    25 hp

Dustex Corp., 100 Chastain Center Blvd. NW Ste. 195, Kennesaw, GA
30144 Tel: (770) 429-5575 Fax: (770) 429-5556

3          Cyclones                 6" thru 100"

3,4        Shakers                  Various

3,4        Cartridge Pulse Jet      Various

3,4        Round                    Various

3,4        Pulse pipe / Jet         Various

3,4        Remote Venturi           Various

3,4        Modular Pulse Pipe       Various

4          Boothwall                6' - 18' long

3,4        Insertables              Various

Dustvent Inc., 100 W. Fay St., Addison, IL 60101 Tel: (630) 543-9007
or (800) 553 3687 Fax: (630) 543-1407

1, 3, 4    DUSTVENT Roll-A-Round    Models 12T1-1/2RAR, 15T3RAR,
           Cyclone Dust             15T5RAR
           Collectors With
           Bag After Filters

1, 3, 4    DUSTVENT Small Cyclone   Models 12T1-1/2 x 55, 15T3 x 55,
           Dust Collectors W/       15T5 x 55
           Sleeve After Filters

1, 3, 4    DUSTVENT Medium          Models 19T3 x 55, 19T5 x 55,
           Cyclone Dust             19T7-1/2 x 55, 23T7-1/2 x 55,
           Collectors With Plenum   23T10 x 55
           Style After Filters

1, 3, 4    DUSTVENT Large Direct    Models 29Q10 x 55, 29Q15 x 55,
           Drive Cyclone            29Q20 x 55, 35D20HOP,
           Collectors with Plenum   23D25HOP
           or Free Standing After
           Filters

1, 3, 4    DUSTVENT Giant           Models 35B25HOP, 35B30HOP,
           Belt-Driven              43B30HOP, 43B40HOP,
           Cyclone Collectors       43850HOP
           with Free Standing
           After Filters

1, 3, 4    DUSTVENT Small Fabric    Models 60H3/4, 120H1
           Filter Dust Collectors   150H3/200H3, 200H3, 200H5

1, 3, 4    DUSTVENT Medium Size     Models 5-300, 3-400, 5-400,
           Fabric Filter Dust       5-640, 7-1/2-640,7-1/2-800,
           Collectors               10-800

1, 3, 4    DUSTVENT Large Size      Models 10-1200, 15-1200,
           Fabric Filter Dust       20-1200, 20-1800, 25-1800
           Collectors

1,2,3,4    DUSTVENT 5' x 3'         5' x 3' open grid
           Select Flow Downdraft
           Bench

1, 3, 4    DUSTVENT 2.3 X 3F1       2-1/2' x 3' open grid, 34"
           Convertible Downdraft    high. 3 side access.
           Bench

1, 3, 4    DUSTVENT #6x4, F2/F4     6' x 4' open grid, 34" high.
           Downdraft Bench          Supports parts to 4000# weight.
                                    4 side access.

** Felder USA, 2 Lukens Drive, Ste. 300, New Castle, DE 19720
Tel: (866) 792-5288 Fax: (302) 322-9865

3          AF22                     small, twin bag

3          RL 125                   small-mid

3          RL 160                   mid

** Flamex Inc., 4365 Federal Drive, Greensboro, NC 27410-8116
Tel: (336) 299-2933 Fax: (336) 299-2944

2          FLAMEX Spark Detection   For pneumatic ducts up to 80"
           & Extinguishing System   diameter

4          MOLDOW Baghouse          10 hp and up
           Filters

** Format -4 USA, 2 Lukens Drive, Ste. 300, New Castle, DE 19720
Tel: (866) 792-5288 Fax: (302) 322-9865

3          RL125                    small-mid

3          RL160                    mid

3          RL250                    mid-large

** Global Finishing Solutions, 12731 Norway Road, Osseo, WI 54758
Tel: (800) 848-8738 Fax: (715) 597-2193

3          JBI-88                   Inside 8'w x 8'h x 8'd
                                    Outside 8'4"w x 8'6"h x 12'd

3          JBI-128                  Inside 12'w x 8'h x 8'd
                                    Outside 13'w x 8'6"h x 12'd

3          JBI-158                  Inside 15'w x 8'h x 8'd
                                    Outside 16'w x 8'8"h x 12'd

3          JBI-228                  Inside 22'w x 8'h x 8'd
                                    Outside 23'w x 8'8"h x 12'd

** GreCon Inc., 15875 SW 74th Ave., Tigard, OR 97224
Tel: (503) 641-7731 Fax: (503) 641-7508

1, 2, 3    GreCon Spark Detection   For pneumatic conveying
           & Extinguishing          ducts up to 79" diameter
           Systems Abort gates,
           Smoke/Fire Detection

1, 2, 3    Cyclone ABC Plug-Up
           Detection Systems

Grizzly Industrial Inc., 1203 Lycoming Mall Circle, Muncy, PA 17756
Tel: (800) 523-4777 Fax: (570) 546-7724

           G1163                    1 HP

           G8027                    1 HP

           G0583                    1 HP

           G1028Z                   1.5 HP

           G1029Z                   2 HP

           G1030                    3 HP

           G0548                    2 HP

           G0562                    3 HP

           G9958                    4 HP

           G5954                    5 HP

           G0508                    10 HP

           G0443                    1.5 HP

           G0440                    2 HP

           G0441                    3 HP

           G0442                    5 HP

           G0601                    5 HP

           G0637                    7.5 HP

           G0638                    10 HP

Hansentek, 4141 Sladeview Crescent, #18, Mississauga, ON L5L 5T1
Canada Tel: (905) 607-5780 Fax: (905) 607-5779

2          Hansentek Spark          For pneumatic ducts up to 48"
           Detection Sys.

** Honeyville Metal Inc., 4200 S. 900 W., Topeka, IN 46571
Tel: (800) 593-8377 Fax: (260) 593-2486

1, 3, 4    HMI/MAC MCF Baghouse     7' to 14' dia. and 112-494 bags
           with cyclonic
           separation

1, 3, 4    EFR Pulse-Jet Baghouse   48" to 82" dia. and 18-86 bags
           with cyclonic
           separation

1, 3, 4    SF Shaker Filter         30-96 bags, long & short
           Baghouse, manual or      versions
           power shakers

1, 3, 4    ST-54 Downdraft          36" x 60" tabletop work areas
           sanding benches &
           workstations

1, 3, 4    MH Series Standard       18" to 180" dia.
           Cyclone

1, 3, 4    MH-HE Series Cyclones    20" to 42" dia.

1, 3, 4    MH-HE/HV Cyclone         36" to 144" dia.
           Collectors

** Koger/Air Corp., P.O. Box 2098, Martinsville, VA 24113
Tel: (800) 638-2096

1, 3                                Unlimited

** Kraemer Tool & Mfg. Co., 75 Devon Road, Brampton, ON, Canada
L6T 5A4 Tel: (800) 443-6443 or (905) 458-0400 Fax: (888) 565-9999

           Small portable dust      1-5hp
           collectors

           Small stationary dust    1-5hp, 1, 2 or 3 filter bags
           collectors

           Large dust collectors    5 hp and up to 30 hp

           Large dust collectors    15 hp and up to 250 hp

           Large dust collectors    2 hp and up to 175 hp

           Cyclones                 2 hp and up

           Air locks                6-in. to 18-in.

           Duct work

           Downdraft Tables
           (self-cleaning)

** Lobo Machinery Corp., 13731 Proctor Ave., City of Industry,
CA 91746 Tel: (626) 369-6500 Fax: (626) 369-6677

4          DC-101                   2 hp

4          DC-102                   3 hp
           DC-805                   5 hp

4          DC-8010                  10 hp

MAC Equipment, 7901 N.W. 107th Terrace, Kansas City, MO 64153
Tel: (888) 821-2476 Fax: (816) 891-8336

           MPH Baghouse             7 ft - 17 ft dia

           MCF Baghouse             7 ft - 24 ft dia

           ST, LST Baghouse         9 to 144 bags

           AVS                      9 to 64 bags

           AVR                      7 to 80 bags

           [MAC.sup.2]Flo           4 to 144 cartridges

           HE Cyclones              21 in to 27 in. dia

           H Cyclone                51 in. to 144 in. the

Murphy-Rodgers Inc., 2301 Belgrave Ave., Huntington Park, CA 90255
Tel: (323) 587-4118 Fax: (323) 583-9540

3          MRZ                      2 - 10 hp

3          MRM                      3 - 20 hp

3          MRC                      2 - 50 hp

3          MRSE                     10 - 40 hp

3          MRJ-SE                   60 - 100 hp

** Nordfab Systems, P.O. Box 190, Thomasville, NC 27361
Tel: (800) 532-0830 Fax: (336) 889-7873

1          Quick-Fit (QF) Ducting   4" up

** Oneida Air Systems Inc., 1001 West Fayette St., Syracuse,
NY 13204 Tel: (315) 476-5151 Fax: (315) 476-5044

3          2hp Industrial Dust      900 cfm @ 8" static pressure
           Collector

3          3hp Industrial Dust      1350 cfm @ 8" static pressure
           Collector

3          5hp Industrial Dust      2000 cfm @ 8" static pressure
           Collector

3          7.5hp Industrial Dust    2700 cfm @ e" static pressure
           Collector

3          10hp Industrial Dust     3000 cfm@ 8" static pressure
           Collector

3          15hp Industrial Dust     4200 cfm 48" static pressure
           Collector

3          2hp Gorilla/ Super       1405 Max. cfm
           Gorilla

3          2hp & 3hp Commercial     1405 & 1835 Max. cfm

3          3hp Super Gorilla        1762 cfm @ 2" SP

3          3hp High Vac             1652 cfm@ 3.1" SP

3          5hp High Vac             2150 Max. cfm

3          5hp Direct Drive         2000 cfm @ 8" SP

3          7.5hp Direct Drive       3500 Max. cfm

3          15hp Direct Drive        6000 cfm @ 2.33 SP

3          15hp Pulley Drive        4500 cfm @ 12" SP

3          20hp Direct Drive        6646 cfm @ 2.7" SP

** Powermatic Corp., WMH Tool Group, 2420 Vantage Drive, Elgin,
IL 61024 Tel. (847) 851-1000 Fax: (847) 851-1045

3          Model 75                 1,900 cfm

** The RAM Group, 13520 S. Chippewa Trail, Lockport, IL 60441
Tel: (708) 301-0660 Fax: (708) 301-0669

4          Central dust             As required
           collection systems

2          Spark detection          As required
           systems

Resource Conservation Group, 1921 State St. E, Petersburg, PA 17520
Tel: (717) 569-2499 Fax: (717) 569-8977

4          RCG                      As required

** SandMan Products, P.O. Box 205, Osceola, IN 46561
Tel: (800) 265-2008 or (574) 264-7700 Fax: (574) 264-7705

3          M7236 - M4826            72" x 36" - 48" x 26"

3          DL7236                   72" x 36"

           DL9648                   96" x 48"

Scientific Dust Collectors, 4101 W. 126th St., Alsip, IL 60803-1901
Tel: (708) 597-7090 Fax: (708) 597-0313

1, 3, 4    SPJ Top Removal          500-100,000 cfm
           Baghouse

1, 3, 4    SPJ Railing Top          500-100,000 cfm
           Baghouse

1, 3, 4    SPJ Bottom Removal       500-100,000 cfm
           Baghouse

1, 3, 4    SPJ Horiz. Removal       500-100,000 cfm
           Baghouse

1, 3, 4    Bin Vents                100-100,000 cfm

1, 3, 4    Inserts                  100-100,000 cfm

1, 3, 4    Rotary Air Locks         Various

1, 3, 4    Explosion Vents          Various

1, 3, 4    Fans (belt & direct      Various
           drive)

1, 3, 4    MP Cartridge Dust        1,000 cfm and up
           Collectors

1, 3, 4    SL Cartridge Dust        1,000 cfm and up
           Collectors

1, 3, 4    LP Cartridge Dust        1,000 cfm and up
           Collectors

1, 3, 4    Stationary Benches       500 cfm and up

1, 3, 4    Downdraft Tables         500 cfm and up

Sternvent Co. Inc., 253 W. Fort Lee Road, Bogota NJ 07603
Tel: (800) 383-3878 or (201) 488-1146 Fax: (201) 488-1605

1, 3, 4    Sternvent Direct Drive   Models CYD 1602-3015
           Cyclone                  CYH2407-3015
           Drive Collectors with
           After Filters

1, 3, 4    Sternvent Belt Drive     Models CYL3620-4460
           Cyclone Dust
           Collectors with After
           Filters

1, 3, 4    Sternvent Cabinet        Models DGH 201, 203, 305
           Style

1, 3, 4    Sternvent VIBRACLEAN     Models DKPD 24405, 36007, 48015,
           Filter Style Dust        72020 and 96030
           Collectors

1, 3, 4    Sternvent VIBRACLEAN     Models DKPD 48010
           Filter Style Dust
           Collector with 95%
           Final Filter

1, 3, 4    Sternvent Pulse Jet      Models CCP36-100
           Bag Dust Collectors      TLS120-240

1, 3, 4    Sternvent Pulse Jet      Models SPV-4, 6, 8, 12, 16, 24

Western Pneumatics, P.O. Box 21340, Eugene, OR 97402
Tel: (541) 461-2600 Fax: (541) 461-2606

4          Filter

3          Feeder                   12 x 16, 30 x 35+

3          Cyclone, Fan

W.C. Wiedenmann and Co. Inc., 875 N. Jan-Mar Ct., Olathe, KS 66061
Tel: (913) 782-4900 Fax: (913) 782-5423

           Cyclone                  Wide range

           Rotary airlock           8" to 24" dia., 1/2-3 hp

           Pulse jet dust
           collector

           Work station             108" to 216" wide

Wilke Machinery Co., 3230 Susquehanna Trail, York, PA 17402
Tel: (717) 764-5000 Fax: (717) 764-3778

           Bridgewood #BW-105A      Two 4" dia. or 5"

           Bridgewood #BW-002A      Two 4" dia. inlets or 5"

           Bridgewood #BW-002AC     Two 4" dia. inlets or 5"

           Bridgewood #BW-003A      Four 4" dia. inlets or 7"

           Bridgewood #BW-005A      Four 4" dia. to (1) 9"

           Bridgewood #BW-CDC3      Three 4" dia. or 8"

           Bridgewood #BW-CDC5      Four 4" dia or 10"

           Bridgewood #BW-CDC7      Five 4" dia. or 12"

Type       Model Name/No.           Size Capacity Range

AAF International, P.O. Box 35690, Louisville, KY 40232
Tel: (800) 477-1214 Fax: (800) 254-3019

1, 3       ArrestAll                150 - 10,000 cfm

1,2,3,4    OptiFlo                  2,000- 100,000 cfm

1,3,4      "M" FabriPulse           1,000- 15,000 cfm

1,2, 3,4   "C" FabriPulse           7,500- 120,000 cf.

Advanced Recycling Equipment Inc., 850 Washington Road, St. Mary's,
PA 15857 Tel: (814) 834-4470 Fax: (814) 834-3483

3          Challenger Hopper Feed   Hopper capacity 1-75 cu. yd.
           Grinders CG 200-CG1000   500 - 56,000 lbs an hour
           Gravity feed grinders    25-200 hp
           CGG100 and CGG200

3          Challenger Horizontal    18 - 150 hp
           Feed Grinders CH
           100 - 600

3          Challenger Slab/Pallet   75 - 200 hp
           Horizontal grinder
           CHSP200 - CHSP600

Adwest Technologies Inc., 151 Trapping Brook Road, Wellsville, N.Y.
14895-9465 Tel: (585) 593-1405 Fax: (585) 593-6614

4          Retox RTO                1,000 - 65,000 SCFM

Aget Mfg. Co., P.O. Box 248, Adrian, MI 49221 Tel: (800) 832-2438
Fax: (517) 263-7154

3          DB Series                200-600 cfm

3          Dustkop Cyclone Push-    200-18,000 cfm
           Through

3          Dustkop Cyclone Pull-    500-7,000 cfm
           Through

3, 4       FT Series After          500-6,000 cfm
           Filters

3, 4       FT-S Series After        500-6,000 cfm
           Filters

3, 4       FH Series Filterkop      3,000-40,000 cfm

1          RV Series Rotary         To 34 cu fpm at 50% fill rate
           Valves

3          DDT Downdraft Table      7-32 sq ft tables
           Series

Air Craftsmen Inc., P.O. Box 2093, Lexington, NC 27293
Tel: (336) 248-5777 Fax: (336) 248-2460

1,2,3,4    Filtration               Unlimited

4          TRM Dust Collector       1 - 15 machine saws or sanders

1          Piping/Ductwork          1000 - 10,000 cfm

** Air Control Technology, 3636 Hawkestone Road, Mississauga, ON,
Canada L5C 2V2 Tel: (905) 949-4747 Fax: (905) 949-0886

1,2,3,4    ACT Model SPC            4,000 cfm - unlimited

1,2,3,4    Model RPB Round Pulse    4,000 cfm - unlimited
           Bag

1,2,3,4    Round Reverse Air &      4,000 cfm - unlimited
           Shaker Bag

1,2,3,4    Square Pulse Bag         4,000 cfm - unlimited

** Air Handling Systems, 5 Lunar Drive, Woodbridge, CT 06525-2320
Tel: (203) 389-9595 or (800) 367-3828 Fax: (203) 389-8340

1, 3       Dust Collection          195 cfm - 35,000 cfm
           Components

Air Systems Mfg. P.O. Box 1736, Lenoir, NC 28645
Tel: (828) 757-3500 Fax: (828) 758-5178

1, 3, 4    Filtration               Unlimited

3          High efficiency dust     To 17"
           collector

AireWorks, 11421 Kiley Drive, Huntley, IL 60142 Tel: (847) 961-5656
Fax: (847) 666-9197

3                                   up to 1200 cfm/ 2000 cfm

3                                   up to 3000 cfm/ 3500 cfm

3                                   up to 6000 cfm/ 7000 cfm

3                                   up to 8000 cfm

3                                   up to 800/ 3200/6400 cfm

Airflow Systems Inc., 11221 Pagemill Road, Dallas, TX 75243
Tel: (214) 503-8008 Fax: (214) 503-9596

4          Dust-PAK

4          V-Series Hi-Vacuum

4          F-Series

** American Fabric Filter, 29807 State Road 54, Wesley Chapel, FL 33543
Tel: (800) 367-3591 Fax: (813) 991-9700

3                                   500-200,000 cfm

3          custom accessories       unlimited

** Atlantic Machinery Corp., 36 South End Plaza, New Milford,
CT 06776 Tel: (860) 354-7200 Fax: (860) 354-0315

3          Coral CLEN               1128 cfm at 4.5" of static
                                    press.

3          Coral CA/1C              1890 cfm - at 4.5" of static
                 CA/2C              press.
                                    2480 cfm - at 4.5" of static
                                    press.

3          Coral CA/3C              3180 cfm - at 4.5" of static
                 CA/4C              press.
                                    3850 cfm - at 4.5" of static
                                    press

3          Coral AF/2C              3930 cfm - at 4.5" of static
                                    press.

3          Coral AF/4C              5310 cfm - at 4.5" of static
                                    press.

3          Coral FN/NA, FN/NB       6,500-10,000 cfm

4          Coral Cartridge          Filtering surface from 70-118
           Filters                  sq. ft.

3          Coral MECMODUL           10,000 to 100,000 CFM

3          Super 5                  5890 cfm @ 4.5" of static press.

3          Eurofilter 100           1350 cfm @ 4.5" of static press.

3          Eurofilter 160           1890 cfm @ 4.5" of static press.

3          Eurofilter 200           3500 cfm @ 4.5" of static press.

Bruning & Federle Mfg. Co., P.O. Box 5547, Statesville, NC 28687
Tel: (704) 873-7237 Fax: (704) 878-0647

1, 3                                Unlimited

** CTD Machines Inc., 2300 E. 11th St., Los Angeles, CA 90021
Tel: (213) 689-445 Fax: (213) 689-1255

3          DC 3000                  1800 cfm

** Clarke's Sheet Metal Inc., 660 Conger, P.O. Box 2428, Eugene, OR
97402 Tel: (541) 343-3395 Fax: (541) 345-1447

4          Pneu-Aire Filter         Effect. Cloth. Area sq. ft.:
                                    358-9, 187 Length of bags:
                                    10'-20' 11,900 lbs, No. of
                                    bags: 10-100

2          Pyroguard Spark          1 to  60 zones
           Detection &
           Suppression System

** Cresswood Recycling Systems, 55. W. Lincoln Hwy., Cortland, IL 60112
Tel: (800) 962-7302 or (815) 758-7171 Fax: (815) 758-0733

                                    Output depends upon type of
                                    material, HP, screen size

3          EF-24A (30, 40, 50 HP)   950-4,000 lbs/hr

3          LR-30 (60, 75, 100 HP)   800 - 13,000 lbs/hr

3          EF-36A (50, 60 HP)       1,200 - 6000 lbs/hr

           EF-50                    2,000 - 13,000 lbs/hr

           EF-60 (75, 100,          2,000 - 15,O00 1bs/hr
           125 HP)

3          EF-72 (75, 100,          2,000 - 20,000 lbs/hr
           125 HP)

3          HF-36 (30, 50 HP)        800 - 4,500 1bs/hr

3          HF-40 (40, 50, 75 HP)    1,000 - 10,000 lbs/hr

3          HF-50 (50, 60, 75 HP)    2,000 - 14,000 lbs/hr

3          HF-60 (60,75, 100 HP)    2,000 - 14,000 lbs/hr

** Danatherm Filtration, 102 Transit Ave., P.O. Box 429, Thomasville,
NC 27361-0429 Tel: (800) 533-5286 Fax: (336) 821-0890

1          Clean sweep filters      3000 to 18,000 cfm

1          Storage silos            1,000-46,000 cu. ft.
           Clean Sweep Cyclones

4          Bag House                From 100 cfm to several
                                    hundred thousand cfm

** Denray Machine Inc., 10775 Lawrence, Road 1140, Mt. Vernon,
MO 65712 Tel: (800) 766-8263 or (417) 466-4046 Fax: (417) 466-2394

3          Downdraft dust table     18 sizes, 4 models
           #2872B, 7200B. 9600B,
           4896LP
           2634B, 3000-OH-
           Overhead

3          2800 through 9600

3          Dust Booths

3          Backdraft Units

Donaldson Torit, 1400 W. 94th St., Minneapolis, MN 55431
Tel: (800) 365-1331 Fax: (952) 887-3608

3          RF Baghouse              2,500-91,000 cfm

3          Dalamatic                1,500-51,000 cfm

3          Environmental Control    3,000-18,000 cfm
           Booth

3          Cyclones                 300 - 13,000 cfm

3          Unimaster Bag            120-6,500 cfm

Dustek -- Div. of Boshco, 144-A Rangeway Road, N. Billerica,
MA 01862 Tel: (978) 667-1911 or (800) 442-4430 Fax: (978) 671-0011

3          C300                     1000 cfm
3          C500                     2000 cfm

3          C750                     3000 cfm

3          C1000                    4000 cfm

3          C1500                    5500 cfm

3          C2000                    7000 cfm

3          W750                     3000 cfm

3          W1000                    4000 cfm

3          W1500, W2000             5500 cfm/ 7000 cfm

3          W2500                    8,500 cfm

Dustex Corp., 100 Chastain Center Blvd. NW Ste. 195, Kennesaw, GA
30144 Tel: (770) 429-5575 Fax: (770) 429-5556

3          Cyclones                 150 - 200,000 cfm

3,4        Shakers                  200 - 6,750 cfm

3,4        Cartridge Pulse Jet      600 - 92,000 cfm

3,4        Round                    up to 200,000 cfm

3,4        Pulse pipe / Jet         up to 20,000 cfm

3,4        Remote Venturi           up to 100,000 cfm

3,4        Modular Pulse Pipe       unlimited

4          Boothwall                up to 15,000 cfm

3,4        Insertables              800 - 4500 cfm

Dustvent Inc., 100 W. Fay St., Addison, IL 60101 Tel: (630) 543-9007
or (800) 553 3687 Fax: (630) 543-1407

1, 3, 4    DUSTVENT Roll-A-Round    0 to 1900 CFM with Bag Style
           Cyclone Dust             After Filters 1-1/2, 3, and 5 hp
           Collectors With
           Bag After Filters

1, 3, 4    DUSTVENT Small Cyclone   0 to 1900 CFM with Sleeve Style
           Dust Collectors W/       After Filters 1-1/2, 3, and 5 hp
           Sleeve After Filters

1, 3, 4    DUSTVENT Medium          1000 to 4000 CFM with 2 and 3
           Cyclone Dust             Filter Plenum Style After
           Collectors With Plenum   Filters, 3 thru 10 hp
           Style After Filters

1, 3, 4    DUSTVENT Large Direct    2500 to 9500 CFM with 4 Filter
           Drive Cyclone            Plenum and 16 Filter Free
           Collectors with Plenum   Standing After Filters. 10 thru
           or Free Standing After   25 hp
           Filters

1, 3, 4    DUSTVENT Giant           6000 to 16000 CFM with 16 and
           Belt-Driven              24 Filter Free Standing After
           Cyclone Collectors       Filters. 25 thru 50 hp
           with Free Standing
           After Filters

1, 3, 4    DUSTVENT Small Fabric    0 to 2500 CFM 3/4 thru 3 hp
           Filter Dust Collectors

1, 3, 4    DUSTVENT Medium Size     1000 to 6000 CFM 3 thru 10 hp
           Fabric Filter Dust
           Collectors

1, 3, 4    DUSTVENT Large Size      3500 to 11000 CFM. 10
           Fabric Filter Dust       thru 25 hp
           Collectors

1,2,3,4    DUSTVENT 5' x 3'         Up to 2,400 FPM velocity;
           Select Flow Downdraft    airflow adjustable on work
           Bench                    surface

1, 3, 4    DUSTVENT 2.3 X 3F1       1480 downflow CFM produces
           Convertible Downdraft    dust capture veloc. to 450 fpm
           Bench                    3 hp.

1, 3, 4    DUSTVENT #6x4, F2/F4     5876 cfm generates capture
           Downdraft Bench          velocities to 900 fpm.
                                    Only 7-1/2hp.

** Felder USA, 2 Lukens Drive, Ste. 300, New Castle, DE 19720
Tel: (866) 792-5288 Fax: (302) 322-9865

3          AF22                     3 hp, 2x53 gallon bags,
                                    air volume 1800 cfm

3          RL 125                   53 gallon, air volume 1118 cfm

3          RL 160                   2x53 gallon bag 1883 cfm

** Flamex Inc., 4365 Federal Drive, Greensboro, NC 27410-8116
Tel: (336) 299-2933 Fax: (336) 299-2944

2          FLAMEX Spark Detection
           & Extinguishing System

4          MOLDOW Baghouse          3,000 - 150,000 cfm
           Filters                  in one unit

** Format -4 USA, 2 Lukens Drive, Ste. 300, New Castle, DE 19720
Tel: (866) 792-5288 Fax: (302) 322-9865

3          RL125                    53 gallon, air volume 1118 cfm

3          RL160                    2x53 gallon bag, 1883 cfm

3          RL250                    3x53 gallon bag, 2940 cfm

** Global Finishing Solutions, 12731 Norway Road, Osseo, WI 54758
Tel: (800) 848-8738 Fax: (715) 597-2193

3          JBI-88

3          JBI-128

3          JBI-158

3          JBI-228

** GreCon Inc., 15875 SW 74th Ave., Tigard, OR 97224
Tel: (503) 641-7731 Fax: (503) 641-7508

1, 2, 3    GreCon Spark Detection   1, 2,, 4, 8, 12, 24
           & Extinguishing          zone control consoles
           Systems Abort gates,     High temp apps up to 1830F
           Smoke/Fire Detection

1, 2, 3    Cyclone ABC Plug-Up      1-3 zone capacity, high temp
           Detection Systems        applications up to 1830F

Grizzly Industrial Inc., 1203 Lycoming Mall Circle, Muncy, PA 17756
Tel: (800) 523-4777 Fax: (570) 546-7724

           G1163                    450 CFM

           G8027                    500 CFM

           G0583                    800 CFM

           G1028Z                   1300 CFM

           G1029Z                   1550 CFM

           G1030                    2300 CFM

           G0548                    1700 CFM

           G0562                    2320 CFM

           G9958                    3560 CFM

           G5954                    4820 CFM

           G0508                    6700 CFM

           G0443                    1025 CFM @ 2.6" SP

           G0440                    1354 CFM @ 2.5" SP

           G0441                    1654 CFM @ 2.0" SP

           G0442                    2184 CFM @ 1.9" SP

           G0601                    2184 CFM @ 1.9" SP

           G0637                    3468 CFM @ 4.3" SP

           G0638                    4029 CFM @ 2.5" SP

Hansentek, 4141 Sladeview Crescent, #18, Mississauga, ON L5L 5T1
Canada Tel: (905) 607-5780 Fax: (905) 607-5779

2          Hansentek Spark
           Detection Sys.

** Honeyville Metal Inc., 4200 S. 900 W., Topeka, IN 46571
Tel: (800) 593-8377 Fax: (260) 593-2486

1, 3, 4    HMI/MAC MCF Baghouse     Up to 72,000 cfm
           with cyclonic
           separation

1, 3, 4    EFR Pulse-Jet Baghouse   Up to 12,500 cfm
           with cyclonic
           separation

1, 3, 4    SF Shaker Filter         Up to 9,200 cfm
           Baghouse, manual or
           power shakers

1, 3, 4    ST-54 Downdraft          4,500 and 7,500 cfm
           sanding benches &
           workstations

1, 3, 4    MH Series Standard       575 to 57,500 cfm
           Cyclone

1, 3, 4    MH-HE Series Cyclones    550 to 3,500 cfm

1, 3, 4    MH-HE/HV Cyclone         2,200 to 41,000 cfm
           Collectors

** Koger/Air Corp., P.O. Box 2098, Martinsville, VA 24113
Tel: (800) 638-2096

1, 3                                Unlimited

** Kraemer Tool & Mfg. Co., 75 Devon Road, Brampton, ON, Canada
L6T 5A4 Tel: (800) 443-6443 or (905) 458-0400 Fax: (888) 565-9999

           Small portable dust      800-2137 cfm
           collectors

           Small stationary dust    800-2137 cfm
           collectors

           Large dust collectors    2000-10,000 cfm

           Large dust collectors    5000 and up cfm

           Large dust collectors    1200-40,000 cfm

           Cyclones                 1200 and up cfm

           Air locks                3.6 to 115 cf

           Duct work                all sizes

           Downdraft Tables         4000-6000 cfm
           (self-cleaning)

** Lobo Machinery Corp., 13731 Proctor Ave., City of Industry,
CA 91746 Tel: (626) 369-6500 Fax: (626) 369-6677

4          DC-101                   5.5 cu. ft., 1200 cfm

4          DC-102                   11 cu. ft., 2600 cfm
           DC-805                   18 cu. ft., 3800 cfm

4          DC-8010                  48 cu. ft., 7000 cfm

MAC Equipment, 7901 N.W. 107th Terrace, Kansas City, MO 64153
Tel: (888) 821-2476 Fax: (816) 891-8336

           MPH Baghouse             up to 100,000 cfm

           MCF Baghouse             up to 200,000 cfm

           ST, LST Baghouse         up to 25,000 cfm

           AVS                      up to 8,500 cfm

           AVR                      up to 10,000 cfm

           [MAC.sup.2]Flo           up to 100,000 cfm

           HE Cyclones              up to 12,000 cfm

           H Cyclone                6,200 to 70,000 cfm

Murphy-Rodgers Inc., 2301 Belgrave Ave., Huntington Park, CA 90255
Tel: (323) 587-4118 Fax: (323) 583-9540

3          MRZ                      800 - 3,000 cfm

3          MRM                      1,200 - 6,200 cfm

3          MRC                      800 - 11,000 cfm

3          MRSE                     3,000 - 11,000 cfm

3          MRJ-SE                   400 - 40,000 cfm

** Nordfab Systems, P.O. Box 190, Thomasville, NC 27361
Tel: (800) 532-0830 Fax: (336) 889-7873

1          Quick-Fit (QF) Ducting

** Oneida Air Systems Inc., 1001 West Fayette St., Syracuse,
NY 13204 Tel: (315) 476-5151 Fax: (315) 476-5044

3          2hp Industrial Dust      any size container
           Collector

3          3hp Industrial Dust      any size container
           Collector

3          5hp Industrial Dust      any size container
           Collector

3          7.5hp Industrial Dust    any size container
           Collector

3          10hp Industrial Dust     any size container
           Collector

3          15hp Industrial Dust     any size container
           Collector

3          2hp Gorilla/ Super       Any size container
           Gorilla

3          2hp & 3hp Commercial     Any size container

3          3hp Super Gorilla        Any size container

3          3hp High Vac             Any size container

3          5hp High Vac             Any size container

3          5hp Direct Drive         Any size container

3          7.5hp Direct Drive       Any size container

3          15hp Direct Drive        Any size container

3          15hp Pulley Drive        Any size container

3          20hp Direct Drive        Any size container

** Powermatic Corp., WMH Tool Group, 2420 Vantage Drive, Elgin,
IL 61024 Tel. (847) 851-1000 Fax: (847) 851-1045

3          Model 75                 10 cu ft

** The RAM Group, 13520 S. Chippewa Trail, Lockport, IL 60441
Tel: (708) 301-0660 Fax: (708) 301-0669

4          Central dust
           collection systems

2          Spark detection          Per customer requirements
           systems

Resource Conservation Group, 1921 State St. E, Petersburg, PA 17520
Tel: (717) 569-2499 Fax: (717) 569-8977

4          RCG                      3,000-300,000 cfm

** SandMan Products, P.O. Box 205, Osceola, IN 46561
Tel: (800) 265-2008 or (574) 264-7700 Fax: (574) 264-7705

3          M7236 - M4826            1900 - 3000 cfm

3          DL7236                   3200 cfm

           DL9648                   5600cfm

Scientific Dust Collectors, 4101 W. 126th St., Alsip, IL 60803-1901
Tel: (708) 597-7090 Fax: (708) 597-0313

1, 3, 4    SPJ Top Removal          500-10,000 cfm
           Baghouse

1, 3, 4    SPJ Railing Top          500-100,000
           Baghouse

1, 3, 4    SPJ Bottom Removal       500-10,000 cfm
           Baghouse

1, 3, 4    SPJ Horiz. Removal       500-10,000 cfm
           Baghouse

1, 3, 4    Bin Vents                500-100,000 cfm

1, 3, 4    Inserts                  500-100,000 cfm

1, 3, 4    Rotary Air Locks         Various

1, 3, 4    Explosion Vents          Various

1, 3, 4    Fans (belt & direct      Various
           drive)

1, 3, 4    MP Cartridge Dust        1,000 cfm and up
           Collectors

1, 3, 4    SL Cartridge Dust        1,000 cfm and up
           Collectors

1, 3, 4    LP Cartridge Dust        1,000 cfm and up
           Collectors

1, 3, 4    Stationary Benches       500 cfm and up

1, 3, 4    Downdraft Tables         500 cfm and up

Sternvent Co. Inc., 253 W. Fort Lee Road, Bogota NJ 07603
Tel: (800) 383-3878 or (201) 488-1146 Fax: (201) 488-1605

1, 3, 4    Sternvent Direct Drive   800-5,600 cfm
           Cyclone
           Drive Collectors with
           After Filters

1, 3, 4    Sternvent Belt Drive     7,000-15,000 cfm, 20-60 hp
           Cyclone Dust
           Collectors with After
           Filters

           Sternvent Cabinet        1000-2,000 cfm
1, 3, 4    Style                    1-5 hp

1, 3, 4    Sternvent VIBRACLEAN     2,000-9,600 cfm
           Filter Style Dust        5-30 hp
           Collectors

1, 3, 4    Sternvent VIBRACLEAN     3,000 cfm, 10 hp
           Filter Style Dust
           Collector with 95%
           Final Filter

1, 3, 4    Sternvent Pulse Jet      2000-15,000 cfm
           Bag Dust Collectors

1, 3, 4    Sternvent Pulse Jet      1,000-8,000 cfm

Western Pneumatics, P.O. Box 21340, Eugene, OR 97402
Tel: (541) 461-2600 Fax: (541) 461-2606

4          Filter

3          Feeder

3          Cyclone, Fan

W.C. Wiedenmann and Co. Inc., 875 N. Jan-Mar Ct., Olathe, KS 66061
Tel: (913) 782-4900 Fax: (913) 782-5423

           Cyclone                  1,200 to 20,000 cfm

           Rotary airlock           .95 cu ft/ref to 22 cu ft/rev

           Pulse jet dust           2 to 12 cartridge
           collector

           Work station             9,800 to 19,600 cfm

Wilke Machinery Co., 3230 Susquehanna Trail, York, PA 17402
Tel: (717) 764-5000 Fax: (717) 764-3778

           Bridgewood #BW-105A      950 cfm at 5" s.p.

           Bridgewood #BW-002A      1,100 cfm at 5" s.p.

           Bridgewood #BW-002AC     1,100 cfm at 5" s.p.

           Bridgewood #BW-003A      1,900 cfm at 6" s.p.

           Bridgewood #BW-005A      3,900 cfm at 8" s.p.

           Bridgewood #BW-CDC3      1,700 cfm at 6" s.p.

           Bridgewood #BW-CDC5      2,000 cfm at 8" s.p.

           Bridgewood #BW-CDC7      2,400 cfm at 10" s.p.

Type       Model Name/No.           Type Wood Waste Accepted

AAF International, P.O. Box 35690, Louisville, KY 40232
Tel: (800) 477-1214 Fax: (800) 254-3019

1, 3       ArrestAll                Dust, chips

1,2,3,4    OptiFlo                  Dust

1,3,4      "M" FabriPulse           Dust

1,2, 3,4   "C" FabriPulse           Dust

Advanced Recycling Equipment Inc., 850 Washington Road, St. Mary's,
PA 15857 Tel: (814) 834-4470 Fax: (814) 834-3483

3          Challenger Hopper Feed   Green and dry softwoods and
           Grinders CG 200-CG1000   hardwoods, pallets, blocks,
           Gravity feed grinders    strips, edgings, veneer, bark,
           CGG100 and CGG200        slab, offcuts

3          Challenger Horizontal    Long strips, edgings, lineal
           Feed Grinders CH         pieces, end cuts, small blocks,
           100 - 600                etc.

3          Challenger Slab/Pallet   Slabs, whole and broken pallets,
           Horizontal grinder       blocks, lineal pieces, edgings
           CHSP200 - CHSP600

Adwest Technologies Inc., 151 Trapping Brook Road, Wellsville, N.Y.
14895-9465 Tel: (585) 593-1405 Fax: (585) 593-6614

4          Retox RTO                Organic fumes and odors

Aget Mfg. Co., P.O. Box 248, Adrian, MI 49221 Tel: (800) 832-2438
Fax: (517) 263-7154

3          DB Series                Dust, chips, shavings

3          Dustkop Cyclone Push-    Dust, chips, shavings
           Through

3          Dustkop Cyclone Pull-    Dust, chips, shavings
           Through

3, 4       FT Series After          Fine dust, chips
           Filters

3, 4       FT-S Series After        Fine dust
           Filters

3, 4       FH Series Filterkop      Fine dust, chips

1          RV Series Rotary         Dust, chips, shavings
           Valves

3          DDT Downdraft Table      Dust, chips, shavings
           Series

Air Craftsmen Inc., P.O. Box 2093, Lexington, NC 27293
Tel: (336) 248-5777 Fax: (336) 248-2460

1,2,3,4    Filtration               Sanding dust to hog waste

4          TRM Dust Collector       Sanding dust to hog waste

1          Piping/Ductwork          Sanding dust, saw dust, hog
                                    chips

** Air Control Technology, 3636 Hawkestone Road, Mississauga, ON,
Canada L5C 2V2 Tel: (905) 949-4747 Fax: (905) 949-0886

1,2,3,4    ACT Model SPC            All

1,2,3,4    Model RPB Round Pulse    All
           Bag

1,2,3,4    Round Reverse Air &      All
           Shaker Bag

1,2,3,4    Square Pulse Bag         All

** Air Handling Systems, 5 Lunar Drive, Woodbridge, CT 06525-2320
Tel: (203) 389-9595 or (800) 367-3828 Fax: (203) 389-8340

1, 3       Dust Collection          All types
           Components

Air Systems Mfg. P.O. Box 1736, Lenoir, NC 28645
Tel: (828) 757-3500 Fax: (828) 758-5178

1, 3, 4    Filtration               Sanding dust to hog waste

3          High efficiency dust     Saw dust
           collector

AireWorks, 11421 Kiley Drive, Huntley, IL 60142 Tel: (847) 961-5656
Fax: (847) 666-9197

3                                   dry wood dust/shavings

3                                   dry wood dust/shavings

3                                   dry wood dust/shavings

3                                   dry wood dust/shavings

3                                   solid surface, fine sanding

Airflow Systems Inc., 11221 Pagemill Road, Dallas, TX 75243
Tel: (214) 503-8008 Fax: (214) 503-9596

4          Dust-PAK                 Dust

4          V-Series Hi-Vacuum       Dust

4          F-Series                 Dust

** American Fabric Filter, 29807 State Road 54, Wesley Chapel, FL 33543
Tel: (800) 367-3591 Fax: (813) 991-9700

3

3          custom accessories

** Atlantic Machinery Corp., 36 South End Plaza, New Milford,
CT 06776 Tel: (860) 354-7200 Fax: (860) 354-0315

3          Coral CLEN               Sanding dust, sawdust, chips,
                                    shavings

3          Coral CA/1C              Sand dust, sawdust, chips,
                 CA/2C              shavings

3          Coral CA/3C              Sand dust, sawdust, chips,
                 CA/4C              shavings

3          Coral AF/2C              Sand dust, sawdust, chips,
                                    shavings

3          Coral AF/4C              Sand dust, sawdust, chips,
                                    shavings

3          Coral FN/NA, FN/NB       Panel processing, sawdust,
                                    sanding dust, chip

4          Coral Cartridge          Fine sanding, dust, sawdust,
           Filters                  solid surface dust wood chips

3          Coral MECMODUL           Same as filters (above) plus
                                    shavings

3          Super 5                  Fine Dust

3          Eurofilter 100           Fine Dust

3          Eurofilter 160           Fine Dust

3          Eurofilter 200           Fine Dust

Bruning & Federle Mfg. Co., P.O. Box 5547, Statesville, NC 28687
Tel: (704) 873-7237 Fax: (704) 878-0647

1, 3                                All types

** CTD Machines Inc., 2300 E. 11th St., Los Angeles, CA 90021
Tel: (213) 689-445 Fax: (213) 689-1255

3          DC 3000                  Dust and chips

** Clarke's Sheet Metal Inc., 660 Conger, P.O. Box 2428, Eugene, OR
97402 Tel: (541) 343-3395 Fax: (541) 345-1447

4          Pneu-Aire Filter         All types

2          Pyroguard Spark          All types
           Detection &
           Suppression System

** Cresswood Recycling Systems, 55. W. Lincoln Hwy., Cortland, IL 60112
Tel: (800) 962-7302 or (815) 758-7171 Fax: (815) 758-0733

3          EF-24A (30, 40, 50 HP)   Long strips

3          LR-30 (60, 75, 100 HP)   Green & dry material from
                                    1/16" - 7 1/2" thick

3          EF-36A (50, 60 HP)       Blocks, long strips

           EF-50                    Pallets, edgings, PB, MDF, solid
                                    wood

           EF-60 (75, 100,          Pallets, slabs, green wood, PB
           125 HP)

3          EF-72 (75, 100,          Whole pallets, long strips
           125 HP)

3          HF-36 (30, 50 HP)        Cutoffs, half pallets, blocks

3          HF-40 (40, 50, 75 HP)    Cutoffs, half pallets, blocks

3          HF-50 (50, 60, 75 HP)    Cutoffs, pallets, blocks

3          HF-60 (60,75, 100 HP)    Whole pallets, cutoffs

** Danatherm Filtration, 102 Transit Ave., P.O. Box 429, Thomasville,
NC 27361-0429 Tel: (800) 533-5286 Fax: (336) 821-0890

1          Clean sweep filters      All types

1          Storage silos            Hogged fuel, sawdust--dry or wet
           Clean Sweep Cyclones

4          Bag House                All types

** Denray Machine Inc., 10775 Lawrence, Road 1140, Mt. Vernon,
MO 65712 Tel: (800) 766-8263 or (417) 466-4046 Fax: (417) 466-2394

3          Downdraft dust table     Hand sanding or routers
           #2872B, 7200B. 9600B,
           4896LP
           2634B, 3000-OH-
           Overhead

3          2800 through 9600        Wood & wood related dust

3          Dust Booths

3          Backdraft Units

Donaldson Torit, 1400 W. 94th St., Minneapolis, MN 55431
Tel: (800) 365-1331 Fax: (952) 887-3608

3          RF Baghouse              All types

3          Dalamatic                All types

3          Environmental Control    Coarse & fine dust from sanding
           Booth

3          Cyclones                 Wood chips and dust

3          Unimaster Bag            Coarse & fine dust

Dustek -- Div. of Boshco, 144-A Rangeway Road, N. Billerica,
MA 01862 Tel: (978) 667-1911 or (800) 442-4430 Fax: (978) 671-0011

3          C300                     From very fine to coarse wood
3          C500                     waste, Corian, laminates etc.
                                    also plastic, cotton other
                                    fibers.

3          C750                     Same as above

3          C1000                    Same as above

3          C1500                    Same as above

3          C2000                    Same as above

3          W750                     Same as above

3          W1000                    Same as above

3          W1500, W2000             Same as above

3          W2500                    Same as above

Dustex Corp., 100 Chastain Center Blvd. NW Ste. 195, Kennesaw, GA
30144 Tel: (770) 429-5575 Fax: (770) 429-5556

3          Cyclones                 Dry, all types

3,4        Shakers                  Dry dust and shavings

3,4        Cartridge Pulse Jet      Dry dust

3,4        Round                    All dry materials

3,4        Pulse pipe / Jet         All dry materials

3,4        Remote Venturi           All dry materials

3,4        Modular Pulse Pipe       All dry materials

4          Boothwall                All dry materials

3,4        Insertables              All dry materials

Dustvent Inc., 100 W. Fay St., Addison, IL 60101 Tel: (630) 543-9007
or (800) 553 3687 Fax: (630) 543-1407

1, 3, 4    DUSTVENT Roll-A-Round    All Coarse Dusts from all
           Cyclone Dust             woodworking machines.
           Collectors With
           Bag After Filters

1, 3, 4    DUSTVENT Small Cyclone   All Coarse Dusts
           Dust Collectors W/
           Sleeve After Filters

1, 3, 4    DUSTVENT Medium          All Coarse Dusts
           Cyclone Dust
           Collectors With Plenum
           Style After Filters

1, 3, 4    DUSTVENT Large Direct    All Coarse Dusts
           Drive Cyclone
           Collectors with Plenum
           or Free Standing After
           Filters

1, 3, 4    DUSTVENT Giant           All Coarse Dusts
           Belt-Driven
           Cyclone Collectors
           with Free Standing
           After Filters

1, 3, 4    DUSTVENT Small Fabric    All Fine Dusts such as from
           Filter Dust Collectors   sanders

1, 3, 4    DUSTVENT Medium Size     All Fine Dusts
           Fabric Filter Dust
           Collectors

1, 3, 4    DUSTVENT Large Size      All Fine Dusts
           Fabric Filter Dust
           Collectors

1,2,3,4    DUSTVENT 5' x 3'         Ideal for OSHA compliance on
           Select Flow Downdraft    all wood, plastic and composite
           Bench                    dusts. 99.9% efficiency.

1, 3, 4    DUSTVENT 2.3 X 3F1       Ideal for OSHA compliance on
           Convertible Downdraft    all wood, plastic, and composite
           Bench                    dusts. 99.9%+ efficiency.

1, 3, 4    DUSTVENT #6x4, F2/F4     All dusts from wood, plastic,
           Downdraft Bench          metals, composites. 99.9%-plus
                                    efficiency.

** Felder USA, 2 Lukens Drive, Ste. 300, New Castle, DE 19720
Tel: (866) 792-5288 Fax: (302) 322-9865

3          AF22                     All types

3          RL 125                   All types

3          RL 160                   All types

** Flamex Inc., 4365 Federal Drive, Greensboro, NC 27410-8116
Tel: (336) 299-2933 Fax: (336) 299-2944

2          FLAMEX Spark Detection
           & Extinguishing System

4          MOLDOW Baghouse          All types
           Filters

** Format -4 USA, 2 Lukens Drive, Ste. 300, New Castle, DE 19720
Tel: (866) 792-5288 Fax: (302) 322-9865

3          RL125                    All types

3          RL160                    All types

3          RL250                    All types

** Global Finishing Solutions, 12731 Norway Road, Osseo, WI 54758
Tel: (800) 848-8738 Fax: (715) 597-2193

3          JBI-88                   All types

3          JBI-128                  All types

3          JBI-158                  All types

3          JBI-228                  All types

** GreCon Inc., 15875 SW 74th Ave., Tigard, OR 97224
Tel: (503) 641-7731 Fax: (503) 641-7508

1, 2, 3    GreCon Spark Detection
           & Extinguishing
           Systems Abort gates,
           Smoke/Fire Detection

1, 2, 3    Cyclone ABC Plug-Up
           Detection Systems

Grizzly Industrial Inc., 1203 Lycoming Mall Circle, Muncy, PA 17756
Tel: (800) 523-4777 Fax: (570) 546-7724

           G1163                    Wood dust and chips

           G8027                    Wood dust and chips

           G0583                    Wood dust and chips

           G1028Z                   Wood dust and chips

           G1029Z                   Wood dust and chips

           G1030                    Wood dust and chips

           G0548                    Wood dust and chips

           G0562                    Wood dust and chips

           G9958                    Wood dust and chips

           G5954                    Wood dust and chips

           G0508                    Wood dust and chips

           G0443                    Wood dust and chips

           G0440                    Wood dust and chips

           G0441                    Wood dust and chips

           G0442                    Wood dust and chips

           G0601                    Wood dust and chips

           G0637                    Wood dust and chips

           G0638                    Wood dust and chips

Hansentek, 4141 Sladeview Crescent, #18, Mississauga, ON L5L 5T1
Canada Tel: (905) 607-5780 Fax: (905) 607-5779

2          Hansentek Spark
           Detection Sys.

** Honeyville Metal Inc., 4200 S. 900 W., Topeka, IN 46571
Tel: (800) 593-8377 Fax: (260) 593-2486

1, 3, 4    HMI/MAC MCF Baghouse     Dry & semi-dry, all types,
           with cyclonic            sawdust and chips
           separation

1, 3, 4    EFR Pulse-Jet Baghouse   Dry & semi-dry, all types,
           with cyclonic            sawdust and chips
           separation

1, 3, 4    SF Shaker Filter         Dry, all types
           Baghouse, manual or
           power shakers

1, 3, 4    ST-54 Downdraft          Dry, all types
           sanding benches &
           workstations

1, 3, 4    MH Series Standard       Dry to wet, all types
           Cyclone

1, 3, 4    MH-HE Series Cyclones    Dry & semi-dry, all types

1, 3, 4    MH-HE/HV Cyclone         Dry to wet, all types
           Collectors

** Koger/Air Corp., P.O. Box 2098, Martinsville, VA 24113
Tel: (800) 638-2096

1, 3                                All types

** Kraemer Tool & Mfg. Co., 75 Devon Road, Brampton, ON, Canada
L6T 5A4 Tel: (800) 443-6443 or (905) 458-0400 Fax: (888) 565-9999

           Small portable dust      All types of dry materials
           collectors

           Small stationary dust    All types of dry materials
           collectors

           Large dust collectors    All types of dry materials

           Large dust collectors    All types of dry materials

           Large dust collectors    All types of dry materials

           Cyclones                 All types of dry materials

           Air locks                All types of dry materials

           Duct work                All types of dry materials

           Downdraft Tables         All types of dry materials
           (self-cleaning)

** Lobo Machinery Corp., 13731 Proctor Ave., City of Industry,
CA 91746 Tel: (626) 369-6500 Fax: (626) 369-6677

4          DC-101                   Any

4          DC-102                   Any
           DC-805

4          DC-8010                  Any

MAC Equipment, 7901 N.W. 107th Terrace, Kansas City, MO 64153
Tel: (888) 821-2476 Fax: (816) 891-8336

           MPH Baghouse             Dry all types

           MCF Baghouse             Dry all types

           ST, LST Baghouse         Dry all types

           AVS                      Dry all types

           AVR                      Dry all types

           [MAC.sup.2]Flo           Dry all types

           HE Cyclones              All types

           H Cyclone                All types

Murphy-Rodgers Inc., 2301 Belgrave Ave., Huntington Park, CA 90255
Tel: (323) 587-4118 Fax: (323) 583-9540

3          MRZ                      All

3          MRM                      All

3          MRC                      All

3          MRSE                     All

3          MRJ-SE                   All

** Nordfab Systems, P.O. Box 190, Thomasville, NC 27361
Tel: (800) 532-0830 Fax: (336) 889-7873

1          Quick-Fit (QF) Ducting   All types

** Oneida Air Systems Inc., 1001 West Fayette St., Syracuse,
NY 13204 Tel: (315) 476-5151 Fax: (315) 476-5044

3          2hp Industrial Dust      Wood dust and chips
           Collector

3          3hp Industrial Dust      Wood dust and chips
           Collector

3          5hp Industrial Dust      Wood dust and chips
           Collector

3          7.5hp Industrial Dust    Wood dust and chips
           Collector

3          10hp Industrial Dust     Wood dust and chips
           Collector

3          15hp Industrial Dust     Wood dust and chips
           Collector

3          2hp Gorilla/ Super       Wood dust and chips
           Gorilla

3          2hp & 3hp Commercial     Wood dust and chips

3          3hp Super Gorilla        Wood dust and chips

3          3hp High Vac             Wood dust and chips

3          5hp High Vac             Wood dust and chips

3          5hp Direct Drive         Wood dust and chips

3          7.5hp Direct Drive       Wood dust and chips

3          15hp Direct Drive        Wood dust and chips

3          15hp Pulley Drive        Wood dust and chips

3          20hp Direct Drive        Wood dust and chips

** Powermatic Corp., WMH Tool Group, 2420 Vantage Drive, Elgin,
IL 61024 Tel. (847) 851-1000 Fax: (847) 851-1045

3          Model 75                 Any

** The RAM Group, 13520 S. Chippewa Trail, Lockport, IL 60441
Tel: (708) 301-0660 Fax: (708) 301-0669

4          Central dust
           collection systems

2          Spark detection
           systems

Resource Conservation Group, 1921 State St. E, Petersburg, PA 17520
Tel: (717) 569-2499 Fax: (717) 569-8977

4          RCG

** SandMan Products, P.O. Box 205, Osceola, IN 46561
Tel: (800) 265-2008 or (574) 264-7700 Fax: (574) 264-7705

3          M7236 - M4826            Sanding dust

3          DL7236                   Sanding dust

           DL9648                   Sanding dust

Scientific Dust Collectors, 4101 W. 126th St., Alsip, IL 60803-1901
Tel: (708) 597-7090 Fax: (708) 597-0313

1, 3, 4    SPJ Top Removal          Wood chips and dust
           Baghouse

1, 3, 4    SPJ Railing Top          Wood chips and dust
           Baghouse

1, 3, 4    SPJ Bottom Removal       Wood chips and dust
           Baghouse

1, 3, 4    SPJ Horiz. Removal       Wood chips and dust
           Baghouse

1, 3, 4    Bin Vents                Wood chips and dust

1, 3, 4    Inserts                  Wood chips and dust

1, 3, 4    Rotary Air Locks         Any

1, 3, 4    Explosion Vents          Any

1, 3, 4    Fans (belt & direct      Any
           drive)

1, 3, 4    MP Cartridge Dust        Sanding dust
           Collectors

1, 3, 4    SL Cartridge Dust        Sanding dust
           Collectors

1, 3, 4    LP Cartridge Dust        Sanding dust
           Collectors

1, 3, 4    Stationary Benches       Wood chips and sanding

1, 3, 4    Downdraft Tables         Sanding dust

Sternvent Co. Inc., 253 W. Fort Lee Road, Bogota NJ 07603
Tel: (800) 383-3878 or (201) 488-1146 Fax: (201) 488-1605

1, 3, 4    Sternvent Direct Drive   Coarse dust and shavings
           Cyclone                  2-15 hp
           Drive Collectors with
           After Filters

1, 3, 4    Sternvent Belt Drive     Coarse dust and shavings
           Cyclone Dust
           Collectors with After
           Filters

1, 3, 4    Sternvent Cabinet        Cutting and sanding
           Style

1, 3, 4    Sternvent VIBRACLEAN     Coarse and fine dust from school
           Filter Style Dust        woodshops
           Collectors

1, 3, 4    Sternvent VIBRACLEAN     Solid surfacing dust
           Filter Style Dust
           Collector with 95%
           Final Filter

1, 3, 4    Sternvent Pulse Jet      Coarse and fine dust
           Bag Dust Collectors

1, 3, 4    Sternvent Pulse Jet      CNC Routing Dust

Western Pneumatics, P.O. Box 21340, Eugene, OR 97402
Tel: (541) 461-2600 Fax: (541) 461-2606

4          Filter

3          Feeder

3          Cyclone, Fan

W.C. Wiedenmann and Co. Inc., 875 N. Jan-Mar Ct., Olathe, KS 66061
Tel: (913) 782-4900 Fax: (913) 782-5423

           Cyclone                  Wood chips and dust

           Rotary airlock           Wood chips and dust

           Pulse jet dust
           collector

           Work station             Dust

Wilke Machinery Co., 3230 Susquehanna Trail, York, PA 17402
Tel: (717) 764-5000 Fax: (717) 764-3778

           Bridgewood #BW-105A      Wood chips and dust

           Bridgewood #BW-002A      Wood chips and dust

           Bridgewood #BW-002AC     Wood chips and dust

           Bridgewood #BW-003A      Wood chips and dust

           Bridgewood #BW-005A      Wood chips and dust

           Bridgewood #BW-CDC3      Wood chips and dust

           Bridgewood #BW-CDC5      Wood chips and dust

           Bridgewood #BW-CDC7      Wood chips and dust

Type       Model Name/No.           Manufacturer Comments

AAF International, P.O. Box 35690, Louisville, KY 40232
Tel: (800) 477-1214 Fax: (800) 254-3019

1, 3       ArrestAll                Self-contained shaker-type dust
                                    collector w/ integral fan

1,2,3,4    OptiFlo                  Pulse-Jet cartridge type with
                                    pleated cylindrical filters

1,3,4      "M" FabriPulse           Pulse-Jet fabric type with small
                                    (2.25") diameter. 4' or 6' long
                                    bags

1,2, 3,4   "C" FabriPulse           Pulse-Jet fabric type with
                                    standard (5.25") diameter 12' or
                                    14' long bags

Advanced Recycling Equipment Inc., 850 Washington Road, St. Mary's,
PA 15857 Tel: (814) 834-4470 Fax: (814) 834-3483

3          Challenger Hopper Feed   1-ft screen sections for ease
           Grinders CG 200-CG1000   of hanling, programmable logic
           Gravity feed grinders    control, solid state control
           CGG100 and CGG200        panel, centrifugal clutch for
                                    effectve power trasfer

3          Challenger Horizontal    Models are equipped with the
           Feed Grinders CH         highly advanced Fixcut cutting
           100 - 600                systems

3          Challenger Slab/Pallet   Specially designed to grind
           Horizontal grinder       slabs and pallets
           CHSP200 - CHSP600

Adwest Technologies Inc., 151 Trapping Brook Road, Wellsville, N.Y.
14895-9465 Tel: (585) 593-1405 Fax: (585) 593-6614

4          Retox RTO                Regenerative Thermal Oxidizer,
                                    VOC control

Aget Mfg. Co., P.O. Box 248, Adrian, MI 49221 Tel: (800) 832-2438
Fax: (517) 263-7154

3          DB Series                Self-contained with caster drum
                                    & large filter

3          Dustkop Cyclone Push-    Integrated fans, direct & heavy
           Through                  duty, belt drive

3          Dustkop Cyclone Pull-    Fan mounted on clean air side of
           Through                  cyclone

3, 4       FT Series After          Filter fine dust after cyclone
           Filters

3, 4       FT-S Series After        Integral fans, top mounted
           Filters

3, 4       FH Series Filterkop      For cyclone after filters, or
                                    with fan only

1          RV Series Rotary         For high dust volumes. Feed to
           Valves                   open bins, blow to silo or
                                    trailer

3          DDT Downdraft Table      For sanding, drilling, hand
           Series                   operations. Booth & lighting
                                    options

Air Craftsmen Inc., P.O. Box 2093, Lexington, NC 27293
Tel: (336) 248-5777 Fax: (336) 248-2460

1,2,3,4    Filtration               For large or small applications
                                    to offer complete turnkey job

4          TRM Dust Collector       Simple system for small to
                                    mid-size shop. No moving parts

1          Piping/Ductwork          Clamp together for owner
                                    installation.

** Air Control Technology, 3636 Hawkestone Road, Mississauga, ON,
Canada L5C 2V2 Tel: (905) 949-4747 Fax: (905) 949-0886

1,2,3,4    ACT Model SPC            Manufactured out of 11 gauge
                                    cold rolled steel

1,2,3,4    Model RPB Round Pulse    Manufactured out of 11 gauge
           Bag                      cold rolled steel

1,2,3,4    Round Reverse Air &      Manufactured out of 11 gauge
           Shaker Bag               cold rolled steel

1,2,3,4    Square Pulse Bag         Manufactured out of 11 gauge
                                    cold rolled steel

** Air Handling Systems, 5 Lunar Drive, Woodbridge, CT 06525-2320
Tel: (203) 389-9595 or (800) 367-3828 Fax: (203) 389-8340

1, 3       Dust Collection          Catalogs contain design and
           Components               installation information.
                                    Stock items shipped within 48
                                    hours. In and outdoors.

Air Systems Mfg. P.O. Box 1736, Lenoir, NC 28645
Tel: (828) 757-3500 Fax: (828) 758-5178

1, 3, 4    Filtration               Used and new systems, turnkey
                                    capability

3          High efficiency dust     Small to medium shops, simple
           collector                operation

AireWorks, 11421 Kiley Drive, Huntley, IL 60142 Tel: (847) 961-5656
Fax: (847) 666-9197

3                                   Quiet, powerful, rugged.

3                                   Quiet, powerful, rugged.

3                                   Quiet, powerful, rugged.

3                                   Quiet, powerful, rugged.

3                                   Quiet, pulse clean cartridge.

Airflow Systems Inc., 11221 Pagemill Road, Dallas, TX 75243
Tel: (214) 503-8008 Fax: (214) 503-9596

4          Dust-PAK                 Self cleaning w/Vibra-Pulse
                                    cleaning systems

4          V-Series Hi-Vacuum       Hi-Vacuum for direct source
                                    pick-up from sanders

4          F-Series                 Ambient air cleaners

** American Fabric Filter, 29807 State Road 54, Wesley Chapel, FL 33543
Tel: (800) 367-3591 Fax: (813) 991-9700

3                                   Portable dust collectors.

3          custom accessories       Filter bags, custom filter
                                    media, vent bags, breather bags.

** Atlantic Machinery Corp., 36 South End Plaza, New Milford,
CT 06776 Tel: (860) 354-7200 Fax: (860) 354-0315

3          Coral CLEN               Affordable single bag collector
                                    for smaller shops

3          Coral CA/1C              Indoor use, castered bases, 1-3
                 CA/2C              woodworking machines.
                                    Three-year factory warranty on
                                    impeller

3          Coral CA/3C              Indoor use, castered bases, 1-3
                 CA/4C              woodworking machines.
                                    Three-year factory warranty on
                                    impeller

3          Coral AF/2C              Stationary, high efficiency, low
                                    db levels

3          Coral AF/4C              "Easy clean" man. or motorized
                                    syst, filtering eff. 1.8 micron

3          Coral FN/NA, FN/NB       Modular system, indoor/outdoor
                                    use, highly efficient

4          Coral Cartridge          "Easy clean" system allows unit
           Filters                  to be cleaned without removal
                                    from dust collector

3          Coral MECMODUL           High-capacity outdoor unit
                                    w/rotary valve and opt. blower
                                    or conveyor to move dust to
                                    remote location

3          Super 5                  Equipped with anti-statistically
                                    treated polyester cartridge
                                    filters with manual or automatic
                                    cleaning, rated at 0 micron of
                                    dust particles

3          Eurofilter 100           Same as above

3          Eurofilter 160           Same as above

3          Eurofilter 200           Same as above

Bruning & Federle Mfg. Co., P.O. Box 5547, Statesville, NC 28687
Tel: (704) 873-7237 Fax: (704) 878-0647

1, 3                                Design, fabrication &
                                    installation of dust collecting
                                    and pneumatic conveying systems

** CTD Machines Inc., 2300 E. 11th St., Los Angeles, CA 90021
Tel: (213) 689-445 Fax: (213) 689-1255

3          DC 3000                  Various other models for wood,
                                    plastic or aluminum

** Clarke's Sheet Metal Inc., 660 Conger, P.O. Box 2428, Eugene, OR
97402 Tel: (541) 343-3395 Fax: (541) 345-1447

4          Pneu-Aire Filter         On ground, mounts on its own
                                    base; lightweight design for
                                    roof mounting; bag hanger
                                    assembly; emergency by-pass &
                                    abort gate; structurally
                                    superior

2          Pyroguard Spark          Control console infrared
           Detection &              sensors, extinguishment units,
           Suppression System       explosion vents, backflow
                                    dampers & high speed abort gates
                                    combines to prevent fires &
                                    explosions in conveying systems

** Cresswood Recycling Systems, 55. W. Lincoln Hwy., Cortland, IL 60112
Tel: (800) 962-7302 or (815) 758-7171 Fax: (815) 758-0733

                                    "Destroyer" low rpm, low hp
                                    grinders. Avail. in hopper fed
                                    or horizontal end feed models
                                    from 24" - 72" wide

3          EF-24A (30, 40, 50 HP)   Designed to eliminate waste
                                    edgings directly off gang
                                    ripsaws, small band saws and
                                    blocks from chop saws

3          LR-30 (60, 75, 100 HP)   Large Rotor Series direct drive
                                    for lower cost and greater
                                    output

3          EF-36A (50, 60 HP)       V-drive transmission. Grinding
                                    head speed of 300-400 rpm for
                                    increased output requirements

           EF-50                    Large Rotor Series designed for
                                    greater output with smaller end
                                    product. Good for furniture,
                                    millwork, sawmills, pallet and
                                    trusses

           EF-60 (75, 100,          Large Rotor Series designed for
           125 HP)                  greater output with smaller end
                                    product. Good for sawmills,
                                    pallet, truss, furniture mfg.

3          EF-72 (75, 100,          Designed to accept PB pallets up
           125 HP)                  to 63" wide

3          HF-36 (30, 50 HP)        For companies needing to grind
                                    blocks and small boards up to
                                    36

3          HF-40 (40, 50, 75 HP)    For companies needing to grind
                                    blocks and small boards up to
                                    40"

3          HF-50 (50, 60, 75 HP)    For companies needing to grind
                                    blocks and small boards up to
                                    50"

3          HF-60 (60,75, 100 HP)    For larger cabinet & furniture
                                    manufacturers and woodworking
                                    co.

** Danatherm Filtration, 102 Transit Ave., P.O. Box 429, Thomasville,
NC 27361-0429 Tel: (800) 533-5286 Fax: (336) 821-0890

1          Clean sweep filters      Modular design

1          Storage silos            Bolted steel silos with large
           Clean Sweep Cyclones     section panels for short
                                    installation time. Fitted with
                                    live bottom sweep arm unloader.
                                    Rectangular silos with "pushrod"
                                    type unloader

4          Bag House                Low filter stress with small
                                    pressure loss; modular built
                                    baghouse system

** Denray Machine Inc., 10775 Lawrence, Road 1140, Mt. Vernon,
MO 65712 Tel: (800) 766-8263 or (417) 466-4046 Fax: (417) 466-2394

3          Downdraft dust table     Cleans to 1/2 micron. Pulls down
           #2872B, 7200B. 9600B,    from 2-3 ft.
           4896LP
           2634B, 3000-OH-          20 Sizes and models
           Overhead

3          2800 through 9600        Cleans to 1 micron. Pulls down
                                    from 2-3 ft above & 2-4" from
                                    side. Equipped with casters

3          Dust Booths

3          Backdraft Units          Work area from 48-84" wide

Donaldson Torit, 1400 W. 94th St., Minneapolis, MN 55431
Tel: (800) 365-1331 Fax: (952) 887-3608

3          RF Baghouse              High filtration capacity with
                                    minimal energy loss

3          Dalamatic                Compact footprint

3          Environmental Control    Keeps shop clear from sanding
           Booth                    dust

3          Cyclones                 Indoor/outdoor

3          Unimaster Bag            School workshops

Dustek -- Div. of Boshco, 144-A Rangeway Road, N. Billerica,
MA 01862 Tel: (978) 667-1911 or (800) 442-4430 Fax: (978) 671-0011

3          C300                     Heat stays indoors, moveable,
3          C500                     main system or spot collection.

3          C750                     Same as above

3          C1000                    Same as above

3          C1500                    Same as above

3          C2000                    Same as above

3          W750                     Whispurr Line/Ultra quiet

3          W1000                    Whispurr Line/Ultra quiet

3          W1500, W2000             Whispurr Line/Ultra quiet

3          W2500                    Whispurr Line/Ultra quiet

Dustex Corp., 100 Chastain Center Blvd. NW Ste. 195, Kennesaw, GA
30144 Tel: (770) 429-5575 Fax: (770) 429-5556

3          Cyclones                 Duals and Quads available.

3,4        Shakers                  Integral Fan Packages.

3,4        Cartridge Pulse Jet      Clean side filter access.

3,4        Round                    Walk-in plenum.

3,4        Pulse pipe / Jet         Top or inside bag access.

3,4        Remote Venturi           No pulse pipes.

3,4        Modular Pulse Pipe       Custom manufactured.

4          Boothwall                Environmental workspace.

3,4        Insertables              Various orientations.

Dustvent Inc., 100 W. Fay St., Addison, IL 60101 Tel: (630) 543-9007
or (800) 553 3687 Fax: (630) 543-1407

1, 3, 4    DUSTVENT Roll-A-Round    Used indoors, these collectors
           Cyclone Dust             capture and clean-up wood shop
           Collectors With          dust, are mounted on castered
           Bag After Filters        tripod bases, and can be quickly
                                    rolled from one machine to
                                    another.

1, 3, 4    DUSTVENT Small Cyclone   Used indoors serving 1 to 6
           Dust Collectors W/       woodworking machines,
           Sleeve After Filters     recirculate cleaned air without
                                    heat lost..

1, 3, 4    DUSTVENT Medium          Dust Collectors for indoor or
           Cyclone Dust             outdoor location serving shops
           Collectors With Plenum   with 3 to 10 machines. Cleaned
           Style After Filters      air recirculated to avoid losing
                                    heated or cooled air.

1, 3, 4    DUSTVENT Large Direct    Collectors for indoor or outdoor
           Drive Cyclone            location capturing dust from 8
           Collectors with Plenum   to 25 machines into 55 gal.
           or Free Standing After   Drums or Hoppers. Air
           Filters                  recirculation normal.

1, 3, 4    DUSTVENT Giant           Serving 12 to 40 machines
           Belt-Driven              collectors can be set indoors or
           Cyclone Collectors       outdoors, capture dust in
           with Free Standing       hoppers, operate at 99.9+%
           After Filters            efficiency, recirculate heated
                                    (or cooled) air back to the
                                    plant.

1, 3, 4    DUSTVENT Small Fabric    Generally set indoors,
           Filter Dust Collectors   collectors are guaranteed 99.9%
                                    efficient and recirculate air
                                    without heat (or cooling) loss.

1, 3, 4    DUSTVENT Medium Size     Set indoors or out, cleaned air
           Fabric Filter Dust       is recirculated. Blowers use one
           Collectors               size smaller motor. Single Dust
                                    Catch Hoppers

1, 3, 4    DUSTVENT Large Size      Driven by 10 to 25 hp blowers,
           Fabric Filter Dust       operate at 99.9+% efficiency &
           Collectors               recirculate the air without
                                    loss. Twin dust catch hoppers

1,2,3,4    DUSTVENT 5' x 3'         The most versatile and efficient
           Select Flow Downdraft    bench on the market 4,000 CFM
           Bench                    with only 5 hp - 70 db (A)

1, 3, 4    DUSTVENT 2.3 X 3F1       Self contained. Serves all fixed
           Convertible Downdraft    machines and hand-held tools
           Bench                    such as sanders, routers, power
                                    planes, etc.

1, 3, 4    DUSTVENT #6x4, F2/F4     Use as is for parts to 6' x 4'.
           Downdraft Bench          Minor modifications permit
                                    handling any size part, without
                                    limit.

** Felder USA, 2 Lukens Drive, Ste. 300, New Castle, DE 19720
Tel: (866) 792-5288 Fax: (302) 322-9865 1851

3          AF22                     Stationary or mobile set
                                    available. Quick bag change
                                    system. Quiet.

3          RL 125                   Completely enclosed system. Dust
                                    emmision quality less than 0.2
                                    (mg/[m.sup.3]. Acoustic
                                    pressure 80.

3          RL 160                   Completely enclosed system. Dust
                                    emmision quality less than 0.2
                                    (mg/[m.sup.3]). Acoustic
                                    pressure 80.

** Flamex Inc., 4365 Federal Drive, Greensboro, NC 27410-8116
Tel: (336) 299-2933 Fax: (336) 299-2944

2          FLAMEX Spark Detection   Protects against sparks in
           & Extinguishing System   conveying systems, thus prevents
                                    fires and explosions. Factory
                                    Mutual approved.

4          MOLDOW Baghouse          Modular construction with low
           Filters                  pressure drop means lower HP
                                    required.

** Format -4 USA, 2 Lukens Drive, Ste. 300, New Castle, DE 19720
Tel: (866) 792-5288 Fax: (302) 322-9865

3          RL125                    Completely enclosed system. Dust
                                    emmision quality less than 0.2
                                    (mg/[m.sup.3]). Acoustic
                                    pressure 80.

3          RL160                    Completely enclosed system. Dust
                                    emmision quality less than 0.2
                                    (mg/[m.sup.3]). Acoustic
                                    pressure 80.

3          RL250                    Completely enclosed system. Dust
                                    emmision quality less than 0.1
                                    (mg/[m.sup.3]). Acoustic
                                    pressure 78.

** Global Finishing Solutions, 12731 Norway Road, Osseo, WI 54758
Tel: (800) 848-8738 Fax: (715) 597-2193

3          JBI-88                   Inc. light fixtures & "SafeAir"
                                    modules. Avail. w/opt. control
                                    panel, filters for wood/metal or
                                    fiberglass/lam/composite

3          JBI-128                  Inc. light fixtures & "SafeAir"
                                    modules. Avail. w/opt. control
                                    panel, filters for wood/metal or
                                    fiberglass/lam/composite

3          JBI-158                  Inc. light fixtures & "SafeAir"
                                    modules. Avail. w/opt. control
                                    panel, filters for wood/metal or
                                    fiberglass/lam/composite

3          JBI-228                  Inc. light fixtures, "SafeAir"
                                    modules. Avail. w/opt. control
                                    panel, filters for wood/metal or
                                    fiberglass/lam/composite

** GreCon Inc., 15875 SW 74th Ave., Tigard, OR 97224
Tel: (503) 641-7731 Fax: (503) 641-7508

1, 2, 3    GreCon Spark Detection   Factory Mutual Approved Systems
           & Extinguishing          to detect and extinguish hazards
           Systems Abort gates,     to prevent fires and explosions
           Smoke/Fire Detection     in dust collection equipment

1, 2, 3    Cyclone ABC Plug-Up      Signals early warning of plug-up
           Detection Systems        or bridging in cyclones, hoppers
                                    and chutes.

Grizzly Industrial Inc., 1203 Lycoming Mall Circle, Muncy, PA 17756
Tel: (800) 523-4777 Fax: (570) 546-7724

           G1163                    Portable unit, single stage,
                                    30 micron bag filter

           G8027                    Single stage, 30 micron bag
                                    filter

           G0583                    Single stage, 1 micron canister
                                    filter

           G1028Z                   Single stage, 30 micron bag
                                    filter

           G1029Z                   Single stage, 2.5 micron bag
                                    filter

           G1030                    Single stage, 30 micron bag
                                    filter, 2 bags

           G0548                    Single stage, 1 micron canister
                                    filter

           G0562                    Single stage, 1 micron canister
                                    filter, two canisters

           G9958                    Single stage, 1 micron bag
                                    filter, 2 bags

           G5954                    Single stage, 2.5 micron bag
                                    filter, 2 bags

           G0508                    Single stage, 2.5 micron bag
                                    filter, 4 bags

           G0443                    2-stage cyclone, 0.2-2 micron
                                    filtration, remote control switch

           G0440                    2-stage cyclone, 0.2-2 micron
                                    filtration, remote control switch

           G0441                    2-stage cyclone, 0.2-2 micron
                                    filtration, remote control switch

           G0442                    2-stage cyclone, 0.2-2 micron
                                    filtration, remote control switch

           G0601                    2-stage cyclone, 0.2-2 micron
                                    filtration, remote control switch

           G0637                    2-stage cyclone, 0.2-2 micron
                                    filtration, remote control switch

           G0638                    2-stage cyclone, 0.2-2 micron
                                    filtration, remote control switch

Hansentek, 4141 Sladeview Crescent, #18, Mississauga, ON L5L 5T1
Canada Tel: (905) 607-5780 Fax: (905) 607-5779

2          Hansentek Spark          To prevent sparks in dust
           Detection Sys.           collection equip. FM approved.

** Honeyville Metal Inc., 4200 S. 900 W., Topeka, IN 46571
Tel: (800) 593-8377 Fax: (260) 593-2486

1, 3, 4    HMI/MAC MCF Baghouse     Top bag removal, medium pressure
           with cyclonic            pulse cleaning
           separation

1, 3, 4    EFR Pulse-Jet Baghouse   Top bag removal, high pressure
           with cyclonic            pulse cleaning
           separation

1, 3, 4    SF Shaker Filter         Indoor or outdoor units with 3
           Baghouse, manual or      dust storage hopper options
           power shakers

1, 3, 4    ST-54 Downdraft          Single or double table units
           sanding benches &
           workstations

1, 3, 4    MH Series Standard       Avail. in 4 formats for non- to
           Cyclone                  very highly abrasive app.

1, 3, 4    MH-HE Series Cyclones    Available in 2 formats for non-
                                    to mildly abrasive applications

1, 3, 4    MH-HE/HV Cyclone         In 4 formats for non- to very
           Collectors               highly abrasive applications

** Koger/Air Corp., P.O. Box 2098, Martinsville, VA 24113
Tel: (800) 638-2096

1, 3                                Design, fabrication &
                                    installation of dust collecting
                                    & pneumatic conveying systems

** Kraemer Tool & Mfg. Co., 75 Devon Road, Brampton, ON, Canada
L6T 5A4 Tel: (800) 443-6443 or (905) 458-0400 Fax: (888) 565-9999

           Small portable dust      For coarse and up to very fine
           collectors               dust

           Small stationary dust    For drums
           collectors

           Large dust collectors    With drums, bins and air locks

           Large dust collectors    With gates, swing gates and air
                                    locks

           Large dust collectors    With filter cartridges

           Cyclones                 With stands

           Air locks                With flanges

           Duct work                Design, manufacture and
                                    installation

           Downdraft Tables         With compressed air tanks and
           (self-cleaning)          valves, with cartridges

** Lobo Machinery Corp., 13731 Proctor Ave., City of Industry,
CA 91746 Tel: (626) 369-6500 Fax: (626) 369-6677

4          DC-101                   1 cloth bag, port., single
                                    stage, 6 or 4" x 2 hose connect

4          DC-102                   Two cloth bag, portable unit,
           DC-805                   single stage, 6 or 4" x 3 hose
                                    connection

4          DC-8010                  Four cloth bag, portable unit,
                                    single stage, 8 or 4" x 8  hose
                                    connection

MAC Equipment, 7901 N.W. 107th Terrace, Kansas City, MO 64153
Tel: (888) 821-2476 Fax: (816) 891-8336

           MPH Baghouse             Top bag removal, low-pressure
                                    reverse air cleaning

           MCF Baghouse             Top bag removal, medium-pressure
                                    pulse cleaning

           ST, LST Baghouse         Top bag removal, square, pulse
                                    jet

           AVS                      Bottom removal, square, pulse
                                    jet

           AVR                      Bottom bag removal, round, pulse
                                    jet

           [MAC.sup.2]Flo           Down flow, cartridge filter

           HE Cyclones              High-efficiency cyclone

           H Cyclone                Low-pressure drop

Murphy-Rodgers Inc., 2301 Belgrave Ave., Huntington Park, CA 90255
Tel: (323) 587-4118 Fax: (323) 583-9540

3          MRZ                      1 to 4 bags

3          MRM                      Multi-bags

3          MRC                      Cyclone type

3          MRSE                     Shaker type

3          MRJ-SE                   Reverse-jet cleaning

** Nordfab Systems, P.O. Box 190, Thomasville, NC 27361
Tel: (800) 532-0830 Fax: (336) 889-7873

1          Quick-Fit (QF) Ducting   Quick clamping system allows for
                                    quick installation and system
                                    modification.

** Oneida Air Systems Inc., 1001 West Fayette St., Syracuse,
NY 13204 Tel: (315) 476-5151 Fax: (315) 476-5044

3          2hp Industrial Dust      Central dust collection system
           Collector                filters to 1 micron

3          3hp Industrial Dust      Central dust collection system
           Collector                filters to 1 micron

3          5hp Industrial Dust      Central dust collection system
           Collector                filters to 1 micron

3          7.5hp Industrial Dust    Central dust collection system
           Collector                filters to 1 micron

3          10hp Industrial Dust     Central dust collection system
           Collector                filters to 1 micron

3          15hp Industrial Dust     Central dust collection system
           Collector                filters to 1 micron

3          2hp Gorilla/ Super       Central dust collection system
           Gorilla                  filters to 0.2 microns

3          2hp & 3hp Commercial     Central dust collection system
                                    filters to 0.2 microns

3          3hp Super Gorilla        Central dust collection system
                                    filters to 0.2 microns

3          3hp High Vac             Central dust collection system
                                    filters to 0.2 microns

3          5hp High Vac             Central dust collection system
                                    filters to 0.2 microns

3          5hp Direct Drive         Central dust collection system
                                    filters to 0.2 microns

3          7.5hp Direct Drive       Central dust collection system
                                    filters to 0.2 microns

3          15hp Direct Drive        Central dust collection system
                                    filters to 0.2 microns

3          15hp Pulley Drive        Central dust collection system
                                    filters to 0.2 microns

3          20hp Direct Drive        Central dust collection system
                                    filters to 0.2 microns

** Powermatic Corp., WMH Tool Group, 2420 Vantage Drive, Elgin,
IL 61024 Tel. (847) 851-1000 Fax: (847) 851-1045

3          Model 75                 Four cloth bags, three 4" dust
                                    inlets or one 8"

** The RAM Group, 13520 S. Chippewa Trail, Lockport, IL 60441
Tel: (708) 301-0660 Fax: (708) 301-0669

4          Central dust
           collection systems

2          Spark detection
           systems

Resource Conservation Group, 1921 State St. E, Petersburg, PA 17520
Tel: (717) 569-2499 Fax: (717) 569-8977

4          RCG                      OSHA & DER certified

** SandMan Products, P.O. Box 205, Osceola, IN 46561
Tel: (800) 265-2008 or (574) 264-7700 Fax: (574) 264-7705

3          M7236 - M4826

3          DL7236                   Adjustable height, built-in
                                    storage area, 2-duplex receps

           DL9648                   Heavy duty sanding table

Scientific Dust Collectors, 4101 W. 126th St., Alsip, IL 60803-1901
Tel: (708) 597-7090 Fax: (708) 597-0313

1, 3, 4    SPJ Top Removal          Reverse-pulse jet. Top removal
           Baghouse                 via walk-in plenum

1, 3, 4    SPJ Railing Top          Reverse-pulse jet. Top bag
           Baghouse                 removal via rail top design

1, 3, 4    SPJ Bottom Removal       Reverse-pulse jet. Bottom
           Baghouse                 removal for economic solutions

1, 3, 4    SPJ Horiz. Removal       For low headroom applications
           Baghouse

1, 3, 4    Bin Vents                Work bins & silos

1, 3, 4    Inserts                  Custom designed to fit cyclones
                                    and retrofit old baghouses

1, 3, 4    Rotary Air Locks         Heavy-duty, flexible tip rotary
                                    air lock

1, 3, 4    Explosion Vents          For the woodworking industry

1, 3, 4    Fans (belt & direct      Various blowers available
           drive)

1, 3, 4    MP Cartridge Dust        Downward airflow pattern
           Collectors

1, 3, 4    SL Cartridge Dust        Downward airflow pattern. Uses
           Collectors               horizontal cartridges

1, 3, 4    LP Cartridge Dust        Downward airflow pattern. Uses
           Collectors               vertical cartridges

1, 3, 4    Stationary Benches       Worktables for central
                                    collection systems--heavy duty
                                    style

1, 3, 4    Downdraft Tables         Self-contained unit,
                                    ergonomically designed--heavy
                                    duty style

Sternvent Co. Inc., 253 W. Fort Lee Road, Bogota NJ 07603
Tel: (800) 383-3878 or (201) 488-1146 Fax: (201) 488-1605

1, 3, 4    Sternvent Direct Drive   Indoor or outdoors. For 1-10
           Cyclone                  machines. Avail. w/55 gallon
           Drive Collectors with    drum or hopper. Afterfilter for
           After Filters            recirculation of air

1, 3, 4    Sternvent Belt Drive     Outdoors. For 10-30 woodworking
           Cyclone Dust             machines. Includes rotary
           Collectors with After    airlock discharge. Afterfilter
           Filters                  permits recirculation of air

1, 3, 4    Sternvent Cabinet        Indoors. For intermittent use.
           Style                    Small, quiet and compact

1, 3, 4    Sternvent VIBRACLEAN     Outdoors. For school woodshops.
           Filter Style Dust        Incl: automatic shaker, factory
           Collectors               wired magnetic starter and
                                    discharge silencer

1, 3, 4    Sternvent VIBRACLEAN     Together with down flow air
           Filter Style Dust        cleaners, the fine dust from
           Collector with 95%       cutting and sanding of solid
           Final Filter             surface materials can be
                                    controlled when a walk-in booth
                                    is not practical

1, 3, 4    Sternvent Pulse Jet      Outdoors. For 10-40 production
           Bag Dust Collectors      machines. Avail. w/rotary
                                    airlock for continuous
                                    operation. Air may be
                                    recirculated

1, 3, 4    Sternvent Pulse Jet      Indoors. For collecting the fine
                                    dust of MDF

Western Pneumatics, P.O. Box 21340, Eugene, OR 97402
Tel: (541) 461-2600 Fax: (541) 461-2606

4          Filter                   Remote and primary, cartridge

3          Feeder

3          Cyclone, Fan

W.C. Wiedenmann and Co. Inc., 875 N. Jan-Mar Ct., Olathe, KS 66061
Tel: (913) 782-4900 Fax: (913) 782-5423

           Cyclone                  High efficiency, low volume
                                    collectors, filter options avail.

           Rotary airlock           Heavy duty wide body style
                                    airlock

           Pulse jet dust           Compact pulse jet cartridge
           collector                collector

           Work station             Sanding, grinding, painting
                                    enclosed workstation

Wilke Machinery Co., 3230 Susquehanna Trail, York, PA 17402
Tel: (717) 764-5000 Fax: (717) 764-3778

           Bridgewood #BW-105A      Single stage, 1-1/2-hp, 1-ph
                                    dust collector

           Bridgewood #BW-002A      Single stage, 2-hp, 1-ph dust
                                    collector

           Bridgewood #BW-002AC     Single stage, 2-hp, 1-phase w/ 1
                                    micron canister filter

           Bridgewood #BW-003A      Single stage, 3-hp, 1-ph or
                                    3-hp, 3-ph dust collector

           Bridgewood #BW-005A      Single stage, 5 HP 10 or 30
                                    motor; Two 98 gal. collection
                                    bags; two 42 sq. feet, 1 micron
                                    filter bags

           Bridgewood #BW-CDC3      Two stage cyclone, 3 hp

           Bridgewood #BW-CDC5      Two stage cyclone, 5 hp

           Bridgewood #BW-CDC7      Two stage cyclone, 7-1/2 hp

Type Code: Numbers in "Type" column are keyed to use descriptions
below:

1. Storage & Handling
2. Spark Detection Systems.
3. Systems & Equipment
4. Filters & Systems

WOODWASTE RECOVERY/UTILIZATION REFERENCE GUIDE

Type    Model Name/No.                  Size Range

Advanced Recycling Equipment, 850 Washington Road, St. Marys, PA 15857
Tel: (814) 834-4470 Fax: (814) 834-3483

3       Challenger Hopper Feed          Rotor diameter 10" to 22"
        Grinders CGG-100 - CG1000       Rotor length 13" to 10'
                                        Feed opening 13" x 130"
                                        13" x 30" to 114" x 93"

3       Challenger Horizontal Feed      Rotor diameter 10" to 22"
        Grinders CH-100 -- H-600        Rotor length 13" to 6'
                                        Throat opening 3-1/2" to
                                        7-1/2"

3       Challenger Diesel Power         Rotor diameter 14" to 22"
        Grinders in hopper and
        horizontal

5       Challenger Thermal              750,000 BTU to 60,000,000 BTU
        Combustion Systems

** American Pulverizer Co., 5540 W. Park Ave., St. Louis, MO 63110-1897
Tel: (314) 781-6100 Fax: (314) 781-9209

2, 3,   WC Series                       20-150 hp. Feed opg 20-3/8" x
6                                       13-1/2" to 20-3/8" x 31-1/2"

2, 3,   WS Series                       25-250 hp. Feed opg of 21" x
6                                       17-1/2" to 21" x 69-1/2"

2, 3,   HWC Series                      20-150 hp. Feed opg of
6                                       8" x 13" to 8" x 31"

2, 3,   Slow Speed Shredders            20-800 hp. Feed opg of
4, 6                                    28" x 17" to 105" x 72"

Bruning & Federle Mfg. Co., P.O. Box 5547, Statesville, NC 28687
Tel: (704) 873-7237 Fax: (704) 878-0647

4, 6                                    Unlimited

Capital Machines International, 2801 Roosevelt Ave., Indianapolis,
IN 46218 Tel: (317) 638-6661 Fax: (317) 636-5122

3       #30 Knife Hogs-30" w, 5 heads   30"-42" width of intake
        #42 Knife Hogs-42" w, 7 heads

Carter Day Intl., 500 73rd. Ave. NE, Minneapolis, MN 55432
Tel: (763) 571-1000 Fax: (763) 571-3012

3       Horizontal feed Wood Hog        10"-35" openings w/ 25 to
        HF 2410, HF 2425, HF 2435       150hp

3       Vertical feed Wood Hog          10"-35" openings w/ 25 to
        VF 2410, VF 2425, VF 2435       150hp

3       3/4 circle Hammermill,          15"-48" openings w/ 75 to
        CXT4215, CXT4226, CXT423,       350hp
        CXT4242, CXT3648

3       Half circle Commander           50 to 500hp; 50, 60Hz models
        Hammermill, 2400, 2424,         avail w/ direct drive
        2436, 2442, 3024,
        3036, 4814, 4820, 4832, 4842

3       Full circle XLT Hammermill      10 to 600hp; 50, 60Hz models
        22 sizes avail.                 avail w/ direct drive

3, 5    Air Swept Pulverizer, ASP16H,   300 to 600hp
        ASP22H, ASP28H, ASP38H,
        ASP48H, ASP80H

3       Pallet Shredder, PS 2254        100hp

CHIPTEC Wood Energy Systems, 48 Helen Ave., S. Burlington, VT 05403
Tel: (802) 658-0956 Fax: (802) 660-8904

        Bio-fuel Gasifiers A-Series     500,000 -- 900,000 BTU/hr.
        C-Series                        1mm BTU -- 14mm BTU
        B-Series                        4mm BTU -- 900mm BTU

        Fuel Handling Systems           Various
        Poly Glide Moving Wedge Floor   PG 110 through PG 330
        U.L. Controls                   Panels/PLCs
        Grinders, Dryers

** Clarke's Sheet Metal Inc., 660 Conger, P.O. Box 2428, Eugene,
OR 97402 Tel: (541) 343-3395 Fax: (541) 345-1447

4       Flo-Matic[R] Storage Bins and   Type L, Type M, Type S,
        Unloaders                       Type I, Type FS

4       Belt Conveyors, Chain           To meet specific requirements
        Conveyors, Screw Conveyors,
        Pneumatic Conveyors

7       Pneu-Aire[R] Filter             To: 70,000 CFM

4, 6    Rotary Classifier "CRC"         Full range

4, 6    Metering Bins                   Manufactured to meet specific
                                        application

4, 6    Reclaimers                      Wide variety

4, 6    Rotary Grinder                  25-60 hp

3       Falcon hog                      150-500 hp

** Cresswood Recycling Systems, 55 W. Lincoln Hwy., Cortland, IL 60112
Tel: (815) 758-7171 Fax: (815) 758-0733

        Destroyer                       24"-72"

3       EF-12 (25, 30 hp)               4" x 12"
        Horizontal End Feed

3       EF-24(30, 40, 50 hp)            5" x 24"
        Horizontal End Feed

3       EF-30 (60, 75, 100 hp)          8" x 30"
        Horizontal End Feed

3       EF-36 (50 hp)                   5" x 36"
        Horizontal End Feed

3       EF-50 (60, 75, 100 hp)          7.5" x 50"
        Horizontal End Feed

3       EF-60 (75, 100, 125 hp)         7.5" x 60"
        Horizontal End Feed

3       EF-72 (75, 100, 125 hp)         7.5" x 72"
        Horizontal End Feed

3       HF-36 (30, 40 hp)               3 yd hopper
        Hopper feed

3       HF-40 (40, 50, 60 hp)           2.5 or 5 yd hopper
        Hopper Feed

3       HF-50 (40, 50, 60, 75 hp)       3.5 or 5.5 yd hopper
        Hopper Feed

3       HF-60 (50, 60, 75, 100,         4, 6 or 10 yd hopper
        125 hp)
        Hopper Feed

3       HF-70 (100, 125, 150 hp)        6 or 9.5 yd hopper
        Hopper Feed

Decton Industrial Solid Fuel Systems, P.O. Box 369, Butler, WI 53007
Tel: (262) 781-5533 or (800) 246-1478 Fax: (262) 781-5593

5       Hot Air Furnace Maximum BTU     100,000
        Output RF 24
5       RF 32                           150,000 - 225,000
5       DF 330                          330,000 - 500,000
5       DF 625                          625,000 - 950,000
5       DF 1250                         1,000,000 - 1,800,000
5       DF 2500                         4,000,000

5       Automatic Stoker Systems        Sized for each model and
                                        retrofit

5       Hot Water/low-press steam       10 - 300 hp
        boiler

4       Silos, Storage                  50 cubic feet and larger

4       Woodwaste material handling &
        unloading systems

5       Decton/EWI Burner               500 lb.hr - 5 ton/hr.

Eurohansa Inc., P.O. Box 6416, High Point, NC 27262
Tel: (336) 885-1010 Fax: (336) 885-1011

3       ZTLL                            16" - 140"

3       ZMTHL                           12" - 20"

3       ZMTH                            30" - 120"

3       ZDV                             80" - 120"

Flying Dutchman Inc., 6631 Egypt Road, Smithville, OH 44677-9718
Tel: (330) 669-2297 Fax: (330) 669-2892

4       Flying Dutchman Bin Unloader    7-9' bins--round, square or
        2003 and 2004                   rectangular

4       Flying Dutchman Bin Unloader    10-18' bins--round, square or
        3003, 3004, 3005                rectangular

4       Flying Dutchman Silo Unloader   16-20' silos--round, square
        4043/4004                       or rectangular

4       Flying Dutchman Silo Unloader   20-30' silos--round, square
        4045/4055                       or rectangular

4       Flying Dutchman Silo Unloader   30' silos--round, square or
        4074                            rectangular

Globe Machine Mfg. Co., P.O. Box 2274, Tacoma, WA 98401
Tel: (253) 383-2584 Fax: (253) 572-9672

3       Model 8A Hogs                   12" to 60"

6       Model 65Q automatic pallet      3-1/2" x 48 / 60" x 3" max.
        stock and bunk block machine

Jeffrey Specialty Equipment Corp., 398 Willis Rd., Woodruff, SC 29388
Tel: (864) 476-7523 Fax: (864) 476-7510

4       K.D. Kinetic Drive              Width: 18" to 60"
                                        Length: 12' to 200'

4       LMV, MMV, HMV                   Width: 12" to 5'
                                        Length: 12' to 80'

4       RMV Conveyor-Reactive           Width: 12" to 6'
        Mechanical Vibrating            (wider on req.)
        (Isolated)                      Length: 20' to 65'
                                        (larger on request)

3       30 SS, 34 SS, 45 SS, 54 SS      24" x 22", 24" x 33",
                                        32" x 40",

3       30WB, 34WB, 34WBS               Rotor Sizes: 24" x 22",
                                        24" x 33

3       45WB                            Rotor Size: 32" x 43"

3       54WB, 55WB                      Rotor Sizes: 40" x 30",
                                        40" x 45"

3       56WB, 58WB                      Rotor Sizes: 40" x 54",
                                        40" x 66"

3       59WB                            Rotor Size: 40" x 76"

3       610WB                           Rotor Size: 48" x 80"

3       66WB, 68WB                      Rotor Sizes: 48" x 53",
                                        48" x 68"

3       6WB, 79WB                       Rotor Sizes: 54" x 48",
                                        58" x 70"

3       Rechippers                      Full line

3       Semi-Refiners                   Full line

        WBH Horizontally Fed            Full line
        Wood/Bark Hog

        Solid Waste Shredders           Full line up to 90" x 94"

Laidig Systems Inc., 14535 Dragoon Trail, Mishawaka, IN 46544
Tel: (574) 256-0204 Fax: (574) 256-5575

4       System 243 silo & unloader      10' to 26' dia

4       System 533 silo & unloader      15' to 25' dia.

4       System 298 silo & unloader      15' to 30' dia.

4       System 698 silo & unloader      30' to 60' dia.

4       System 1098 silo & unloader     30' to 70' dia.

        Cone Bottom Silo &              10' to 30' dia.
        Unloader Systems

MAC Equipment, 7901 NW 107th Terrace, Kansas City, MO 64153-1910
Tel: (888) 821-2476 Fax: (816) 891-8336

6       Fabricated airlocks, sizes:     .34 cu. ft. per revolution
        FS10 x 8, FS12 x 10, FS16 x     to 16.6 cu. ft. per
        12, FS20 x 15, FS24 x 24,       revolution
        FS30 x 30, FS36 x 36, FR16
        x 12, and FR20 x 16 with
        square and round inlets
        respectively

7       MWP & MCF Filters               300 sq. ft. of cloth to
                                        7163 sq. ft.

Montgomery Industries International, P.O. Box 3687, Jacksonville,
FL 32206 Tel: (904) 355-5671 Fax: (904) 355-0401

3       Montgomery Bio-Hog--            Cutting circles: HD 18-3/4"
        integral fan model              PM: 22"

        Montgomery Eat-Rite Hog--       Infeed openings: 10-1/4" x
        arranged for bottom discharge   3/8" to 74-1/4 x 17"
                                        30 hp to 400 hp

3       Montgomery K.C, Model           Cutting circles: CS: 32",
        Eat-Rite Hog--arranged for      XL: 36' Infeed openings:
        bottom discharge                21-1/2" x 30" to 75-1/2"
                                        x 35-3 8". 100 - 700 hp

3       20, 40, 60 LRW Series Low       1.1/2.9/5.9 [yd.sup.3]
        Speed Woodwaste Grinders        hopper capacity

3       Montgomery Spiral Design        Cutting circles: 32" and 34"
        Hammer Hog                      Infeed openings: 27" x 31" to
                                        69-1/2" x 31"

3       FS Hog Series                   Cutting circles: 18-3/4"
                                        Infeed openings: 10", 18"
                                        Tooth size: 2" wide;
                                        30-125 hp

Newman Machine Co., P.O. Box 5467, Greensboro, NC 27435-0467
Tel: (336) 273-8261 Fax: (336) 273-6939

3       SS-24                           1-2 tons per hour
        SS-30                           2-4 tons per hour

Pallmann Pulverizers Co. Inc., 820 Bloomfield Ave., Clifton, NJ 07012
Tel: (973) 471-1450 Fax: (973) 471-7152

3       PSN Re-chipper                  Feed openings: 4" x 12" up
                                        to 12" x 30"

3       Knife Mills                     More than 50 sizes

3       Drum Chippers                   Feed openings: 2-3/4" x 12"
                                        up to 31-1/2" x 55"

3       Drum Shredder                   Built in 8 sizes from
                                        250-1200 rotor lengths

3       Hammer Mills                    Rotor lengths from 250mm
                                        to 1800mm

** The Ram Group Inc., 13520 S. Chippewa Trail, Lockport, IL 60441
Tel: (708) 301-0660 Fax: (708) 301-0669

3       Scan Hugger HL2/5/5             10 hp grinder

3       Scan Hugger HL2/7/10            15 hp grinder

3       Scan Hugger HL3/7/10            20/25 hp grinder

3       Scan Hugger HL3/10/12           25/30 hp grinder

3       Scan Hugger HL3/10/16           25/30 hp grinder

3       Scan Hugger HL4/14/13           40/75 hp grinder

3       Scan Hugger HL4/14/20           40/75 hp grinder

3       HT20/25/2                       25 hp

3       Scan Hugger HL4/18/25           75/125 hp grinder

3       Scan Hugger HL35/30             30 hp

3       Scan Hugger HT 30/20

3       Scan Hugger HT35/40             40 hp

3       Scan Hugger HT45/60             60 hp

3       Scan Hugger HL55/40             40 hp

3       Scan Hugger HK35/10             10 hp

4       Pneumatic conveying systems     As required

4       Material handling conveyors     As required

1       Spark detection systems         As required

5       Ranheat Eng. Ltd.               250,000 BTU/hr up to
                                        4 million

Resource Conservation Group, 1921 State St., East Petersburg, PA 17520
Tel: (717) 569-2499 Fax: (717) 569-8977

3       Wood Power Products             12"-60"

5       Wood Power Products             1,000,000-25,000,000 BTUs/hr

Schutte-Buffalo Hammer Mill, 61 Depot St., Buffalo, NY 14206
Tel: (716) 855-1555 Fax: (716) 855-3417

3       HZF Series                      18"-36" width, 75-200 hp

3       Bark Grinder Series             20"-48" width, 100-300 hp

3       13 & 15 Series                  13"-60" width

Tryco/Untha, P.O. Box 1277, Decatur, IL 62525-1277
Tel: (217) 864-4541 Fax: (217) 864-6397

        LR-630                          25 hp

        LR-700                          25 hp

        LR-1000                         30/40/50 hp

        LR-1400                         40/60 hp

        MR-1500                         55-75 hp

        MR-2000                         100-200 hp

        MR-2500                         120-215 hp

        XR-3000                         295-429 hp

        RS30-450                        2 x 7.5-15 hp

        RS40-750                        2 x 15-25 hp

        RS40-960                        2 x 20-25 hp

        RS-50                           Up to 60 hp

Vecoplan LLC, P.O. Box 7224, High Point, NC 27264
Tel: (336) 861-6070 Fax: (336) 861-4329

3       ReTech RG24/20 Starfeed         24" W, 20 hp

3       ReTech RG32 Shorty              32" W, 20 hp

3       ReTech RG32/20 U                32" W, 20 hp

3       ReTech RG42/30 U                42" W, 25-30 hp

3       ReTech RG52 U                   52" W, 40-100 hp

3       ReTech RG52 Shorty              52" W, 40-100 hp

3       ReTech RG52 Stretch             52" W, 40-100 hp

3       ReTech RG62 U                   62" W, 75-150 hp

3       ReTech RG78 K                   78" W, 125-2250 hp

3       ReTech RG98 U                   98" W, 75-150 hp

3       ReTech RG98 K                   98" W, 150-300 hp

3       ReTech VH 14                    14" W, 40 hp

3       ReTech VH 18                    18" W, 50-60 hp

3       ReTech VH 25                    25" W, 60-100 hp

3       ReTech VH 34                    34" W, 60-125 hp

3       ReTech VH 50                    50" W, 125-150 hp

** Weima America Inc., 3678 Centre Circle, Fort Mill, SC 29715
Tel: (888) 440-7170 or (803) 802-7170 Fax: (803) 802-7098

3       Woodchuck                       Hopper 20 hp

3       ECO 1-3                         Hopper 25-40 hp

3       Mole                            Hopper 25-40 hp

3       WL 4-4S & WL 6-6S               Hopper 25-50 hp

3       WL 10 - 20                      Hopper 50-120 hp

3       WL 12-30 Jumbo,Super Jumbo      Hopper 75-2 x 150 hp

3       Woodwolf System                 Hopper - (Varies)

3       Tornado                         Hopper 50-150 hp

3       Crocodile 1500 - 2200           Hopper Duel Motors

3       Beaver 400-1600                 Horizontal 25-50 hp

3       Horizontal Beaver 400-1600      Horizontal 30-50 hp

3       Jaguar 400-1300                 Horizontal 25-50 hp

3       Tiger 400-1500                  Horizontal 40-100 hp
        Jumbo & Super Jumbo

3       Puma 400-800                    Horizontal 40-60 hp

3       Leopard 400-1000                Horizontal 40-75 hp
        Jumbo & Super Jumbo

        TH200-300                       Entry level briquette press

        TH 400-TH 700 (Duo)             Mid-sized briquette press

Wellons Inc., 2525 W. Firestone Lane, Vancouver, WA 98660
Tel: (360) 750-3500 Fax: (360) 750-3400

1, 4,   Wellons storage bins,           13, 17, 19, 21, 24, 30 ft.
5, 6,   Models A-13, A-17, 1-19,        diameter
7,      A-21, A-24 & A-30.

** West Salem Machinery Co., 665 Murlark Ave. N.W., Salem, OR 97304
Tel: (503) 364-2213 Fax: (503) 364-1398

3       4032BH, 4040BH, 4048BH          40" x 32"-64"
        4064BH                          48" x 48"-64"
        4848BH, 4864BH

3       WSM Vertical Wood/Bark Hogs     24" x 12"-32"
        2412B, 2420B, 2432B,            28" x 38"
        2838B                           32" x 40"
        3240B                           40" x 32"-64"
        4032B, 4040B, 4048B, 4064B      48" x 48"-64"
        4848B, 4864B

3       WSM Waste Wood Chipper          48"-84" dia. disc with
                                        6-8 knives

4       WSM Live Bottom Dump Table      6'-10' by 10'-15'

4       WSM Natural Frequency           Up to 60" wide and
        Vibrating Conveyors             150 ft. long

3       WSM High Torque                 24" - 62" hopper widths
        Shredders - Hopper Fed

3       WSM High Torque                 12" - 74"
        Shredders - Horizontally fed.

4       WSM Flat Oscillating Screens    5' x 5' to 10' x 14'

4       WSM Disc Scalping Screens       2' x 6' to 6' x 18'

Williams Patent Crusher & Pulverizer Co., 2701 N. Broadway, St. Louis,
MO 63102 Tel: (314) 621-3348 Fax: (314) 436-2639

3       Model C-32 "No-Nife" Hog        Approx. 4' x 6' x 3'

3       460 Refuse Shredder

3       Ripshear shredder               From 24" x 48" feed opening
                                        at 50 hp to 48" x 74" feed
                                        opening at 600 hp.

3       No-Nife Wood Hog                From 24" x 12" rotor at 20
                                        hp up to 72" x 100" rotor at
                                        2000 hp.

3       Hammermills: GP, Rocket,        From 15" x 6" rotor at 10 hp
        Meteor models                   to x 80" rotor at 600 hp.

Type    Model Name/No.                  Size Capacity Range

Advanced Recycling Equipment, 850 Washington Road, St. Marys, PA 15857
Tel: (814) 834-4470 Fax: (814) 834-3483

3       Challenger Hopper Feed          Hopper capacity 1 - 20 cu.
                                        yd.
        Grinders CGG-100 - CG1000       1,000 lbs/hr - 28 ton/hr
                                        25 hp -- 200 hp

3       Challenger Horizontal Feed      20 hp - 150 hp
        Grinders CH-100 -- H-600

3       Challenger Diesel Power         1000 lbs/hr to 28 ton/hr
        Grinders in hopper and
        horizontal

5       Challenger Thermal
        Combustion Systems

** American Pulverizer Co., 5540 W. Park Ave., St. Louis, MO 63110-1897
Tel: (314) 781-6100 Fax: (314) 781-9209

2, 3,   WC Series                       1/2 - 6 tph
6

2, 3,   WS Series                       2-10 tpm
6

2, 3,   HWC Series                      1/2 - 6 tph
6

2, 3,   Slow Speed Shredders            1-100 tpm
4, 6

Bruning & Federle Mfg. Co., P.O. Box 5547, Statesville, NC 28687
Tel: (704) 873-7237 Fax: (704) 878-0647

4, 6                                    Unlimited

Capital Machines International, 2801 Roosevelt Ave., Indianapolis,
IN 46218 Tel: (317) 638-6661 Fax: (317) 636-5122

3       #30 Knife Hogs-30" w, 5 heads   Veneer to 1/4" thick
        #42 Knife Hogs-42" w, 7 heads

Carter Day Intl., 500 73rd. Ave. NE, Minneapolis,
MN 55432 Tel: (763) 571-1000 Fax: (763) 571-3012

3       Horizontal feed Wood Hog        1-15 TPH depending on
        HF 2410, HF 2425, HF 2435       material and finesse desired

3       Vertical feed Wood Hog          1-15 TPH depending on
        VF 2410, VF 2425, VF 2435       material and finesse desired

3       3/4 circle Hammermill,          2-30 TPH depending on
        CXT4215, CXT4226, CXT423,       material and finesse desired
        CXT4242, CXT3648

3       Half circle Commander           1-20 TPH depending on
        Hammermill, 2400, 2424,         material and finesse desired
        2436, 2442, 3024,
        3036, 4814, 4820, 4832, 4842

3       Full circle XLT Hammermill      1-40 TPH depending on
        22 sizes avail.                 material and finesse desired

3,5     Air Swept Pulverizer, ASP16H,   Varies depending on
        ASP22H, ASP28H, ASP38H,         material and finesse desired
        ASP48H, ASP80H

3       Pallet Shredder, PS 2254        Whole standard pallets

CHIPTEC Wood Energy Systems, 48 Helen Ave., S. Burlington, VT 05403
Tel: (802) 658-0956 Fax: (802) 660-8904

        Bio-fuel Gasifiers A-Series
        C-Series
        B-Series

        Fuel Handling Systems
        Poly Glide Moving Wedge Floor
        U.L. Controls
        Grinders, Dryers

** Clarke's Sheet Metal Inc., 660 Conger, P.O. Box 2428, Eugene,
OR 97402 Tel: (541) 343-3395 Fax: (541) 345-1447

4       Flo-Matic[R] Storage Bins and   Unlimited
        Unloaders

4       Belt Conveyors, Chain           Unlimited
        Conveyors, Screw Conveyors,
        Pneumatic Conveyors

7       Pneu-Aire[R] Filter             Effect. Cloth. Area sq. ft.:
                                        358-9, 187 Shipping weight:
                                        4,000 lbs.-11,900 lbs,
                                        No. of bags: 10-100
                                        Length of bags: 10'-20'

4, 6    Rotary Classifier "CRC"         10-200 units per hour
                                        depending on type & species
                                        of material particle size,
                                        moisture content, etc.

4, 6    Metering Bins                   To customer specification

4, 6    Reclaimers

4, 6    Rotary Grinder                  To spec.

3       Falcon hog                      15-120 tph

** Cresswood Recycling Systems, 55 W. Lincoln Hwy., Cortland, IL 60112
Tel: (815) 758-7171 Fax: (815) 758-0733

        Destroyer                       Output depends upon type of
                                        material, hp and screen size

3       EF-12 (25, 30 hp)               500-2,000 lbs/hr
        Horizontal End Feed

3       EF-24(30, 40, 50 hp)            950-4,000 lbs/hr
        Horizontal End Feed

3       EF-30 (60, 75, 100 hp)          800-12,000 lbs/hr
        Horizontal End Feed

3       EF-36 (50 hp)                   1,200 - 8,000 lbs/hr
        Horizontal End Feed

3       EF-50 (60, 75, 100 hp)          2,000 - 12,000 lbs/hr
        Horizontal End Feed

3       EF-60 (75,100, 125 hp)          2,000 - 15,000 lbs/hr
        Horizontal End Feed

3       EF-72 (75,100, 125 hp)          2,000 - 20,000 lbs/hr
        Horizontal End Feed

3       HF-36 (30, 40 hp)               800 - 4,500 lbs/hr
        Hopper feed

3       HF-40 (40, 50, 60 hp)           1,000 - 10,000 lbs/hr
        Hopper Feed

3       HF-50 (40, 50, 60, 75 hp)       2,000 - 10,000 lbs/hr
        Hopper Feed

3       HF-60 (50, 60, 75, 100,         2,000 - 14,000 lbs/hr
        125 hp)
        Hopper Feed

3       HF-70 (100, 125, 150 hp)        2,000 - 20,000 lbs/hr
        Hopper Feed

Decton Industrial Solid Fuel Systems, P.O. Box 369, Butler, WI 53007
Tel: (262) 781-5533 or (800) 246-1478 Fax: (262) 781-5593

5       Hot Air Furnace Maximum BTU
        Output RF 24
5       RF 32
5       DF 330
5       DF 625
5       DF 1250
5       DF 2500

5       Automatic Stoker Systems

5       Hot Water/low-press steam
        boiler

4       Silos, Storage

4       Woodwaste material handling &
        unloading systems

5       Decton/EWI Burner

Eurohansa Inc., P.O. Box 6416, High Point, NC 27262
Tel: (336) 885-1010 Fax: (336) 885-1011

3       ZTLL                            1-150 cu yd/h.

3       ZMTHL                           1-10 cu yd/h.

3       ZMTH                            1-150 cu yd/h.

3       ZDV                             140-250 cu yd/h.

Flying Dutchman Inc., 6631 Egypt Road, Smithville, OH 44677-9718
Tel: (330) 669-2297 Fax: (330) 669-2892

4       Flying Dutchman Bin Unloader
        2003 and 2004

4       Flying Dutchman Bin Unloader
        3003, 3004, 3005

4       Flying Dutchman Silo Unloader
        4043/4004

4       Flying Dutchman Silo Unloader
        4045/4055

4       Flying Dutchman Silo Unloader
        4074

Globe Machine Mfg. Co., P.O. Box 2274, Tacoma, WA 98401
Tel: (253) 383-2584 Fax: (253) 572-9672

3       Model 8A Hogs                   5 tons to 24 tons/hour

6       Model 65Q automatic pallet      9 bunk blocks/min.
        stock and bunk block machine

Jeffrey Specialty Equipment Corp., 398 Willis Rd., Woodruff, SC 29388
Tel: (864) 476-7523 Fax: (864) 476-7510

4       K.D. Kinetic Drive              Up to 300 T.P.H.

4       LMV, MMV, HMV                   20-60 ft./min.

4       RMV Conveyor-Reactive           20-60 ft./min.
        Mechanical Vibrating
        (Isolated)

3       30 SS, 34 SS, 45 SS, 54 SS      Up to 10 TPH

3       30WB, 34WB, 34WBS               Up to 15 TPH

3       45WB                            Up to 30 TPH

3       54WB, 55WB                      Up to 50 TPH

3       56WB, 58WB                      Up to 85 TPH

3       59WB                            Up to 100 TPH

3       610WB                           Up to 200 TPH

3       66WB, 68WB                      Up to 150 TPH

3       6WB, 79WB                       Up to 200 TPH

3       Rechippers                      Up to 75 TPH

3       Semi-Refiners                   Up to 5 TPH

        WBH Horizontally Fed            Up to 100 TPH
        Wood/Bark Hog

        Solid Waste Shredders           Up to 100 TPH

Laidig Systems Inc., 14535 Dragoon Trail, Mishawaka, IN 46544
Tel: (574) 256-0204 Fax: (574) 256-5575

4       System 243 silo & unloader      1,000 to 28,500 cu. ft.

4       System 533 silo & unloader      1,400 to 70,000 cu. ft.

4       System 298 silo & unloader      1,400 to 51,000 cu. ft.

4       System 698 silo & unloader      20,000 to 275,000 cu. ft.

4       System 1098 silo & unloader     20,000 to 325,000 cu. ft.

        Cone Bottom Silo &              1,000 to 5,100 cu. ft.
        Unloader Systems

MAC Equipment, 7901 NW 107th Terrace, Kansas City, MO 64153-1910
Tel: (888) 821-2476 Fax: (816) 891-8336

6       Fabricated airlocks, sizes:
        FS10 x 8, FS12 x 10, FS16 x
        12, FS20 x 15, FS24 x 24,
        FS30 x 30, FS36 x 36, FR16
        x 12, and FR20 x 16 with
        square and round inlets
        respectively

7       MWP & MCF Filters

Montgomery Industries International, P.O. Box 3687, Jacksonville,
FL 32206 Tel: (904) 355-5671 Fax: (904) 355-0401

3       Montgomery Bio-Hog--            1 TPH to 25 TPH depending on
        integral fan model              application, material &
                                        desired
        Montgomery Eat-Rite Hog--
        arranged for bottom discharge

3       Montgomery K.C, Model           10 TPH to 150 TPH depending
        Eat-Rite Hog--arranged for      on application, material &
        bottom discharge                desired final particle size.

3       20, 40, 60 LRW Series Low       0-1500/ 0-4000/0-6000 lbs/hr
        Speed Woodwaste Grinders

3       Montgomery Spiral Design        Consult factory
        Hammer Hog

3       FS Hog Series                   5 TPH

Newman Machine Co., P.O. Box 5467, Greensboro, NC 27435-0467
Tel: (336) 273-8261 Fax: (336) 273-6939

3       SS-24                           5" x 14"
        SS-30                           6" x 24"

Pallmann Pulverizers Co. Inc., 820 Bloomfield Ave., Clifton, NJ 07012
Tel: (973) 471-1450 Fax: (973) 471-7152

3       PSN Re-chipper                  Max. thru put rate with the
                                        biggest unit is approx.
                                        45 cu. yds./hr.

3       Knife Mills                     Depends on type of feed mat.
                                        and desired fineness

3       Drum Chippers                   Thru put approx. lbs./hr.
                                        From 2,400 to 150,000

3       Drum Shredder                   Depends on machine and
                                        particle size wanted

3       Hammer Mills                    Thru put cap. depends on kind
                                        feed mat'l. and fineness
                                        wanted

** The Ram Group Inc., 13520 S. Chippewa Trail, Lockport, IL 60441
Tel: (708) 301-0660 Fax: (708) 301-0669

3       Scan Hugger HL2/5/5             20" x 24" hopper

3       Scan Hugger HL2/7/10            28" x 40" hopper

3       Scan Hugger HL3/7/10            28" x 40" hopper

3       Scan Hugger HL3/10/12           28" x 48" hopper

3       Scan Hugger HL3/10/16           40" x 58" hopper

3       Scan Hugger HL4/14/13           54" x 54" hopper

3       Scan Hugger HL4/14/20           54" x 79" hopper

3       HT20/25/2                       8" wide horizontal chipper

3       Scan Hugger HL4/18/25           72" x 100" hopper

3       Scan Hugger HL35/30             13' wide horizontal grinder

3       Scan Hugger HT 30/20            11" wide horizontal chipper

3       Scan Hugger HT35/40             13" wide horizontal chipper

3       Scan Hugger HT45/60             18" wide horizontal chipper

3       Scan Hugger HL55/40             22" wide horizontal chipper

3       Scan Hugger HK35/10             13" wide guillotine

4       Pneumatic conveying systems     As per customer requirements

4       Material handling conveyors     As per customer requirements

1       Spark detection systems         As per customer requirements

5       Ranheat Eng. Ltd.

Resource Conservation Group, 1921 State St., East Petersburg, PA 17520
Tel: (717) 569-2499 Fax: (717) 569-8977

3       Wood Power Products             1,000-10,000 lbs/hr

5       Wood Power Products             Hot air, hot water or steam

Schutte-Buffalo Hammer Mill, 61 Depot St., Buffalo, NY 14206
Tel: (716) 855-1555 Fax: (716) 855-3417

3       HZF Series                      1-5 TPH

3       Bark Grinder Series             to 12+ TPH

3       13 & 15 Series                  1-30 TPH

Tryco/Untha, P.O. Box 1277, Decatur, IL 62525-1277
Tel: (217) 864-4541 Fax: (217) 864-6397

        LR-630                          700 x 900 lbs

        LR-700                          27.5" x 42"

        LR-1000                         39" x 42"

        LR-1400                         55" x 42"

        MR-1500                         6-8,000 lbs

        MR-2000                         9-11,000 lbs

        MR-2500                         10-13,000 lbs

        XR-3000                         Up to 45 ton

        RS30-450                        Up to 1000 lbs

        RS40-750                        Up to 2000 lbs

        RS40-960                        Up to 3000 lbs

        RS-50                           Up to 6000 lbs

Vecoplan LLC, P.O. Box 7224, High Point, NC 27264
Tel: (336) 861-6070 Fax: (336) 861-4329

3       ReTech RG24/20 Starfeed         Output (lbs./hr) 100-250

3       ReTech RG32 Shorty              Output (lbs./hr) 300-500

3       ReTech RG32/20 U                Output (lbs./hr) 500-1,000

3       ReTech RG42/30 U                Output (lbs./hr) 600-2,000

3       ReTech RG52 U                   Output (lbs./hr) 1,000-4,000

3       ReTech RG52 Shorty              Output (lbs./hr) 1,000-4,000

3       ReTech RG52 Stretch             Output (lbs./hr) 1,000-4,000

3       ReTech RG62 U                   Output (lbs./hr) 1,500-6,000

3       ReTech RG78 K                   Output (lbs./hr) 2,000-8,000

3       ReTech RG98 U                   Output (lbs./hr) 2,000-8,000

3       ReTech RG98 K                   Output (lbs./hr) 3,000-30,000

3       ReTech VH 14                    Output (lbs./hr) 800-1,500

3       ReTech VH 18                    Output (lbs./hr) 1,000-2,500

3       ReTech VH 25                    Output (lbs./hr) 2,000-4,500

3       ReTech VH 34                    Output (lbs./hr) 2,500-6,500

3       ReTech VH 50                    Output (lbs./hr) 3,000-8,000

** Weima America Inc., 3678 Centre Circle, Fort Mill, SC 29715
Tel: (888) 440-7170 or (803) 802-7170 Fax: (803) 802-7098

3       Woodchuck                       Output: 300-800 lbs/hr

3       ECO 1-3                         Output: 400-2,000 lbs/hr

3       Mole                            Output: 400-2,200 lbs/hr

3       WL 4-4S & WL 6-6S               Output: 400-5,000 lbs/hr

3       WL 10 - 20                      Output: 1,500-15,000 lbs/hr

3       WL 12-30 Jumbo,Super Jumbo      High output applications

3       Woodwolf System                 High output applications

3       Tornado                         High output applications

3       Crocodile 1500 - 2200           High output applications

3       Beaver 400-1600                 Output: 400-9,000 lbs/hr

3       Horizontal Beaver 400-1600      Output: 400-9,000 lbs/hr

3       Jaguar 400-1300                 Output: 400-9,000 lbs/hr

3       Tiger 400-1500                  Output: 700-25,000 lbs/hr
        Jumbo & Super Jumbo

3       Puma 400-800                    Output depends on material

3       Leopard 400-1000                Output depends on material
        Jumbo & Super Jumbo

        TH200-300                       Output: 70-200 lbs/hr

        TH 400-TH 700 (Duo)             Output: 150-700 lbs/hr

Wellons Inc., 2525 W. Firestone Lane, Vancouver, WA 98660
Tel: (360) 750-3500 Fax: (360) 750-3400

1, 4,   Wellons storage bins,           Up to 36,000 cu. ft. per bin
5, 6,   Models A-13, A-17, 1-19,
7,      A-21, A-24 & A-30.

** West Salem Machinery Co., 665 Murlark Ave. N.W., Salem, OR 97304
Tel: (503) 364-2213 Fax: (503) 364-1398

3       4032BH, 4040BH, 4048BH          Up to 75 TPH
        4064BH                          Up to 150 TPH
        4848BH, 4864BH

3       WSM Vertical Wood/Bark Hogs     Up to 15 TPH
        2412B, 2420B, 2432B,            Up to 20 TPH
        2838B                           Up to 30 TPH
        3240B                           Up to 75 TPH
        4032B, 4040B, 4048B, 4064B      Up to 150 TPH
        4848B, 4864B

3       WSM Waste Wood Chipper          Up to 90 UPH

4       WSM Live Bottom Dump Table      According to application

4       WSM Natural Frequency           According to application
        Vibrating Conveyors

3       WSM High Torque                 400 lbs. to 10 TPH
        Shredders - Hopper Fed

3       WSM High Torque                 400 lbs. to 40,000 lbs.
        Shredders - Horizontally fed.

4       WSM Flat Oscillating Screens    Up to 45 units per hour

4       WSM Disc Scalping Screens       Up to 600 TPH

Williams Patent Crusher & Pulverizer Co., 2701 N. Broadway, St. Louis,
MO 63102 Tel: (314) 621-3348 Fax: (314) 436-2639

3       Model C-32 "No-Nife" Hog        3-5 TPH of wood,
                                        3-11 TPH of bark

3       460 Refuse Shredder             60 to 80

3       Ripshear shredder               1-10 tons/hr.

3       No-Nife Wood Hog                1-300 tons/hr.

3       Hammermills: GP, Rocket,        Varies w/feed material
        Meteor models

Type    Model Name/No.                  Type Wood Waste Accepted

Advanced Recycling Equipment, 850 Washington Road, St. Marys, PA 15857
Tel: (814) 834-4470 Fax: (814) 834-3483

3       Challenger Hopper Feed          Green and dry softwoods and
                                        hardwoods, pallets, blocks,
        Grinders CGG-100 - CG1000       strips, edgings, veneer,
                                        bark, slab, offcuts

3       Challenger Horizontal Feed      Long strips, slab, edgings
        Grinders CH-100 -- H-600

3       Challenger Diesel Power         All types of wood waste
        Grinders in hopper and
        horizontal

5       Challenger Thermal              Clean bio-mass and wood
        Combustion Systems              waste, MDF dust

** American Pulverizer Co., 5540 W. Park Ave., St. Louis, MO 63110-1897
Tel: (314) 781-6100 Fax: (314) 781-9209

2, 3,   WC Series                       Cut-off scrap up to 2" thick
6

2, 3,   WS Series                       Cut scrap up to 4" thick,
6                                       whole pallets

2, 3,   HWC Series                      Long edge trimmings, cut offs
6

2, 3,   Slow Speed Shredders            Railroad ties, whole pallets,
4, 6                                    lumber, chairs,

Bruning & Federle Mfg. Co., P.O. Box 5547, Statesville, NC 28687
Tel: (704) 873-7237 Fax: (704) 878-0647

4, 6                                    All types

Capital Machines International, 2801 Roosevelt Ave., Indianapolis,
IN 46218 Tel: (317) 638-6661 Fax: (317) 636-5122

3       #30 Knife Hogs-30" w, 5 heads   Veneer waste
        #42 Knife Hogs-42" w, 7 heads

Carter Day Intl., 500 73rd. Ave. NE, Minneapolis,
MN 55432 Tel: (763) 571-1000 Fax: (763) 571-3012

3       Horizontal feed Wood Hog        Various includes trimmings,
        HF 2410, HF 2425, HF 2435       edgings, rippings

3       Vertical feed Wood Hog          Trimmings, edgings, bark,
        VF 2410, VF 2425, VF 2435       rippings, board waste

3       3/4 circle Hammermill,          Bulky wood waste, bark,
        CXT4215, CXT4226, CXT423,       chips, scrap
        CXT4242, CXT3648

3       Half circle Commander           Clean, dry wood of all types
        Hammermill, 2400, 2424,         up to 3" feed
        2436, 2442, 3024,
        3036, 4814, 4820, 4832, 4842

3       Full circle XLT Hammermill      Clean, dry wood of all types
        22 sizes avail.                 up to 2" feed

35      Air Swept Pulverizer, ASP16H,   Wet or dry clean wood up to
        ASP22H, ASP28H, ASP38H,         1/4 in., chips, shavings,
        ASP48H, ASP80H                  sawdust

3       Pallet Shredder, PS 2254        Wood pallets, plywood, panels

CHIPTEC Wood Energy Systems, 48 Helen Ave., S. Burlington, VT 05403
Tel: (802) 658-0956 Fax: (802) 660-8904

        Bio-fuel Gasifiers A-Series     Clean wood waste, mill
        C-Series                        residue up to 45% mc,
        B-Series                        Clean pallet material
                                        Biomass, 2-1/2" X 2-1/2
                                        max. size

        Fuel Handling Systems           Moves various fibers and
        Poly Glide Moving Wedge Floor   particles
        U.L. Controls
        Grinders, Dryers

** Clarke's Sheet Metal Inc., 660 Conger, P.O. Box 2428, Eugene,
OR 97402 Tel: (541) 343-3395 Fax: (541) 345-1447

4       Flo-Matic[R] Storage Bins and   Wet flakes, wet cedar bark,
        Unloaders                       bagasse, hogged fuel

4       Belt Conveyors, Chain
        Conveyors, Screw Conveyors,
        Pneumatic Conveyors

7       Pneu-Aire[R] Filter

4,6     Rotary Classifier "CRC"

4,6     Metering Bins                   All types

4,6     Reclaimers                      Wide range

4,6     Rotary Grinder                  Waste wood

3       Falcon hog                      All

** Cresswood Recycling Systems, 55 W. Lincoln Hwy., Cortland, IL 60112
Tel: (815) 758-7171 Fax: (815) 758-0733

        Destroyer

3       EF-12 (25, 30 hp)               Rippings and occasional
        Horizontal End Feed             blocks

3       EF-24(30, 40, 50 hp)            Long strips, edgings, blocks
        Horizontal End Feed

3       EF-30 (60, 75, 100 hp)          Green & dry material from
        Horizontal End Feed             1/16" to 8" thick

3       EF-36 (50 hp)                   Blocks, long strips
        Horizontal End Feed

3       EF-50 (60, 75, 100 hp)          Pallets, edgings, PB, MDF
        Horizontal End Feed             solid wood

3       EF-60 (75,100, 125 hp)          Pallets, slabs, green wood,
        Horizontal End Feed             PB

3       EF-72 (75,100, 125 hp)          Whole pallets, long strips,
        Horizontal End Feed             defective sheet stock

3       HF-36 (30, 40 hp)               Cutoffs, half pallets, blocks
        Hopper feed

3       HF-40 (40, 50, 60 hp)           Cutoffs, half pallets, blocks
        Hopper Feed

3       HF-50 (40, 50, 60, 75 hp)       Cutoffs, pallets, blocks
        Hopper Feed

3       HF-60 (50, 60, 75, 100,         Whole pallets, blocks,
        125 hp)                         cutoffs
        Hopper Feed

3       HF-70 (100, 125, 150 hp)        Whole pallets, blocks,
        Hopper Feed                     cutoffs

Decton Industrial Solid Fuel Systems, P.O. Box 369, Butler, WI 53007
Tel: (262) 781-5533 or (800) 246-1478 Fax: (262) 781-5593

5       Hot Air Furnace Maximum BTU     Logs, wood chips, hogged or
        Output RF 24                    ground wood material,
5       RF 32                           sawdust or pellets. 0-50%
5       DF 330                          moisture content.
5       DF 625
5       DF 1250
5       DF 2500

5       Automatic Stoker Systems        Designed to automatically
                                        feed wood chips, hogged or
                                        ground wood material,
                                        sawdust, or pellets into
                                        virtually any boiler or
                                        furnace firebox

5       Hot Water/low-press steam
        boiler

4       Silos, Storage

4       Woodwaste material handling &
        unloading systems

5       Decton/EWI Burner               All types wood waste,
                                        dry - 60% moisture, metered
                                        or bulk feed, with or
                                        without reduction

Eurohansa Inc., P.O. Box 6416, High Point, NC 27262
Tel: (336) 885-1010 Fax: (336) 885-1011

3       ZTLL                            All types of wood waste,
                                        bark and plastic

3       ZMTHL                           All types of wood waste

3       ZMTH                            All types of wood waste

3       ZDV                             All types of wood waste,
                                        railroad

Flying Dutchman Inc., 6631 Egypt Road, Smithville, OH 44677-9718
Tel: (330) 669-2297 Fax: (330) 669-2892

4       Flying Dutchman Bin Unloader    Bark, hogged fuel, sander
        2003 and 2004                   dust, sawdust-green or dry,
                                        shavings, wood chips

4       Flying Dutchman Bin Unloader    See above
        3003, 3004, 3005

4       Flying Dutchman Silo Unloader   See above
        4043/4004

4       Flying Dutchman Silo Unloader   See above
        4045/4055

4       Flying Dutchman Silo Unloader   See above
        4074

Globe Machine Mfg. Co., P.O. Box 2274, Tacoma, WA 98401
Tel: (253) 383-2584 Fax: (253) 572-9672

3       Model 8A Hogs                   Wood veneer

6       Model 65Q automatic pallet      Plywood and board panel
        stock and bunk block machine    products

Jeffrey Specialty Equipment Corp., 398 Willis Rd., Woodruff, SC 29388
Tel: (864) 476-7523 Fax: (864) 476-7510

4       K.D. Kinetic Drive              All types

4       LMV, MMV, HMV                   All types

4       RMV Conveyor-Reactive           All types
        Mechanical Vibrating
        (Isolated)

3       30 SS, 34 SS, 45 SS, 54 SS      Dry, clean woodwaste and
                                        veneer from furniture and
                                        woodworking industry

3       30WB, 34WB, 34WBS               All types, wet or dry; all
                                        sizes, depending on size
                                        of machine & feed opening.
3       45WB

3       54WB, 55WB

3       56WB, 58WB

3       59WB

3       610WB

3       66WB, 68WB

3       6WB, 79WB

3       Rechippers                      Oversize dry and green
                                        pulpwood chips processed to
                                        cooker or digester feed size.

3       Semi-Refiners                   Defiberizing wet, cooked or
                                        semi-cooked chips.

        WBH Horizontally Fed            Oversize and mixed woodwaste.
        Wood/Bark Hog                   Redwood bark, whole tree
                                        logs.

        Solid Waste Shredders           Primary and Secondary OBW and
                                        Sorted.

Laidig Systems Inc., 14535 Dragoon Trail, Mishawaka, IN 46544
Tel: (574) 256-0204 Fax: (574) 256-5575

4       System 243 silo & unloader      Sander dust, shavings,
                                        sawdust, dry hogged wood
                                        (2" minus)

4       System 533 silo & unloader      See above

4       System 298 silo & unloader      Dry & green sawdust,
                                        shavings, wood chips, hogged
                                        wood (2" minus)

4       System 198 silo & unloader      Dry & green sawdust,
                                        shavings, wood chips, hogged
                                        wood (3" minus)

4       System 598 silo & unloader      Dry & green sawdust,
                                        shavings, wood chips, hogged
                                        wood (3" minus)

4       System 1098 silo & unloader     Dry & green sawdust,
                                        shavings, wood chips,
                                        hogged wood (3" minimum)

        Cone Bottom Silo &              Sander dust, shavings,
        Unloader Systems                sawdust, dry hogged
                                        wood (2 * minus)

MAC Equipment, 7901 NW 107th Terrace, Kansas City, MO 64153-1910
Tel: (888) 821-2476 Fax: (816) 891-8336

6       Fabricated airlocks, sizes:     Dust, chipped, hogged or
        FS10 x 8, FS12 x 10, FS16 x     barked wood
        12, FS20 x 15, FS24 x 24,
        FS30 x 30, FS36 x 36, FR16
        x 12, and FR20 x 16 with
        square and round inlets
        respectively

7       MWP & MCF Filters               Sanded dust, hogged or
                                        chipped wood or bark

Montgomery Industries International, P.O. Box 3687, Jacksonville,
FL 32206 Tel: (904) 355-5671 Fax: (904) 355-0401

3       Montgomery Bio-Hog--            All species-green or KD,
        integral fan model              cut-off, edgings, plywood
                                        veneer and particleboard
        Montgomery Eat-Rite Hog--       trim and scrap, small
        arranged for bottom discharge   quantities of bark, for scrap
                                        over 8' long would use
                                        horizontal infeed model hog

3       Montgomery K.C, Model           Slabs, log butts, cores,
        Eat-Rite Hog--arranged for      lily pads, bark from tumbling
        bottom discharge                drum or rosserhead debarkers.

3       20, 40, 60 LRW Series Low       Blocks, edgings, trimmings,
        Speed Woodwaste Grinders        veneer, pallets and pallet
                                        scraps

3       Montgomery Spiral Design        Sandy bark and other
        Hammer Hog                      materials with considerable
                                        amounts of abrasive content.
                                        (Content factory)

3       FS Hog Series                   Lightwood scrap-thin edgings,
                                        rippings, trim ends;
                                        1" thick, occasional 2" thick

Newman Machine Co., P.O. Box 5467, Greensboro, NC 27435-0467
Tel: (336) 273-8261 Fax: (336) 273-6939

3       SS-24                           Slabs, boards, offcuts,
        SS-30                           small rounds edging

Pallmann Pulverizers Co. Inc., 820 Bloomfield Ave., Clifton, NJ 07012
Tel: (973) 471-1450 Fax: (973) 471-7152

3       PSN Re-chipper                  Cut-offs, trimmings, edgings,
                                        veneer waste, plywood
                                        waste, etc.

3       Knife Mills                     Best suited for preparation
                                        of short waste wood, board
                                        waste, veneer waste,
                                        splinters, etc

3       Drum Chippers                   Long & short logs, slabs,
                                        edgings, thinnings, bark
                                        veneer waste, or board trims

3       Drum Shredder                   Old crates, pallets, cartons,
                                        paper scraps, etc.

3       Hammer Mills                    Particleboard waste,
                                        larger pieces of waste wood,
                                        bark, etc.

** The Ram Group Inc., 13520 S. Chippewa Trail, Lockport, IL 60441
Tel: (708) 301-0660 Fax: (708) 301-0669

3       Scan Hugger HL2/5/5             Particleboard, hardwoods,
                                        softwoods, MDF, pallets
                                        (with nails), cardboard,
                                        laminates, plastics

3       Scan Hugger HL2/7/10            Same as above

3       Scan Hugger HL3/7/10            Same as above

3       Scan Hugger HL3/10/12           Same as above

3       Scan Hugger HL3/10/16           Same as above

3       Scan Hugger HL4/14/13           Same as above

3       Scan Hugger HL4/14/20           same as above

3       HT20/25/2                       Same as above

3       Scan Hugger HL4/18/25           Same as above

3       Scan Hugger HL35/30             Solid wood, PB or MDF rip
                                        edgings and hardwood blocks

3       Scan Hugger HT 30/20            Same as above

3       Scan Hugger HT35/40             Same as above

3       Scan Hugger HT45/60             Same as above

3       Scan Hugger HL55/40             Same as above

3       Scan Hugger HK35/10             Same as above

4       Pneumatic conveying systems

4       Material handling conveyors

1       Spark detection systems

5       Ranheat Eng. Ltd.

Resource Conservation Group, 1921 State St., East Petersburg, PA 17520
Tel: (717) 569-2499 Fax: (717) 569-8977

3       Wood Power Products             Any

5       Wood Power Products             Any

Schutte-Buffalo Hammer Mill, 61 Depot St., Buffalo, NY 14206
Tel: (716) 855-1555 Fax: (716) 855-3417

3       HZF Series                      Rippings, edgings, trim block

3       Bark Grinder Series             Most barks

3       13 & 15 Series                  Hogged scrap, chips and
                                        shavings

Tryco/Untha, P.O. Box 1277, Decatur, IL 62525-1277
Tel: (217) 864-4541 Fax: (217) 864-6397

        LR-630                          Hardwood

        LR-700                          Veneer, hard & soft,
                                        pallets, paper

        LR-1000                         Veneer, hard & soft,
                                        pallets, paper

        LR-1400                         Veneer, hard & soft,
                                        pallets, paper

        MR-1500                         Hardwood

        MR-2000                         Hardwood

        MR-2500                         Hardwood

        XR-3000                         Demolition waste

        RS30-450                        Hardwood

        RS40-750                        Hardwood

        RS40-960                        Hardwood

        RS-50                           Hardwood

Vecoplan LLC, P.O. Box 7224, High Point, NC 27264
Tel: (336) 861-6070 Fax: (336) 861-4329

3       ReTech RG24/20 Starfeed         Small cutoffs

3       ReTech RG32 Shorty              Small cutoffs

3       ReTech RG32/20 U                Small cutoffs and small
                                        panel scrap

3       ReTech RG42/30 U                Cutoffs, panel scrap

3       ReTech RG52 U                   Cutoffs, panel scrap, pallets

3       ReTech RG52 Shorty              Cutoffs, panel scrap, pallets

3       ReTech RG52 Stretch             Cutoffs, panel scrap, pallets

3       ReTech RG62 U                   Cutoffs, panel scrap,
                                        pallets, large rejects

3       ReTech RG78 K                   Cutoffs, panel scrap,
                                        pallets, large rejects

3       ReTech RG98 U                   Cutoffs, panel scrap,
                                        pallets, large rejects

3       ReTech RG98 K                   Any woodwaste generated

3       ReTech VH 14                    Edgings and cutoffs

3       ReTech VH 18                    Edgings and cutoffs

3       ReTech VH 25                    Edgings and cutoffs

3       ReTech VH 34                    Edgings and cutoffs

3       ReTech VH 50                    Pallet, edgings and cutoffs

** Weima America Inc., 3678 Centre Circle, Fort Mill, SC 29715
Tel: (888) 440-7170 or (803) 802-7170 Fax: (803) 802-7098

3       Woodchuck                       All mixed wood - cutoffs /
                                        blocks

3       ECO 1-3                         All mixed wood - cutoffs /
                                        blocks

3       Mole                            All mixed wood - cutoffs /
                                        blocks

3       WL 4-4S & WL 6-6S               All mixed wood - cutoffs /
                                        blocks

3       WL 10 - 20                      All mixed wood-cutoffs /
                                        blocks / pallets

3       WL 12-30 Jumbo,Super Jumbo      Pallets / large volume mixed
                                        wood

3       Woodwolf System                 Pallets / large volume mixed
                                        wood

3       Tornado                         Pallets / large volume mixed
                                        wood

3       Crocodile 1500 - 2200           Pallets / large volume mixed
                                        wood

3       Beaver 400-1600                 Rippings & edgings /
                                        skeletons

3       Horizontal Beaver 400-1600      Rippings & edgings only

3       Jaguar 400-1300                 Mix of ripping /edgings and
                                        block

3       Tiger 400-1500                  Mix of ripping /edgings and
        Jumbo & Super Jumbo             block

3       Puma 400-800                    Handle all mixed wood scrap

3       Leopard 400-1000                Handle all mixed wood scrap
        Jumbo & Super Jumbo

        TH200-300                       Sawdust & shavings

        TH 400-TH 700 (Duo)             Sawdust/shavings

Wellons Inc., 2525 W. Firestone Lane, Vancouver, WA 98660
Tel: (360) 750-3500 Fax: (360) 750-3400

1, 4,   Wellons storage bins,           All types, wet or dry,
5, 6,   Models A-13, A-17, 1-19,        hogged bark, sawdust,
7,      A-21, A-24 & A-30.              shavings, chips, sander dust

** West Salem Machinery Co., 665 Murlark Ave. N.W., Salem, OR 97304
Tel: (503) 364-2213 Fax: (503) 364-1398

3       4032BH, 4040BH, 4048BH
        4064BH
        4848BH, 4864BH

3       WSM Vertical Wood/Bark Hogs     All types, including trims
        2412B, 2420B, 2432B,            ends, edgings, plywood and
        2838B                           panel trim, round wood,
        3240B                           and bark
        4032B, 4040B, 4048B, 4064B
        4848B, 4864B

3       WSM Waste Wood Chipper          Trim ends, edgings, slab
                                        wood, small logs

4       WSM Live Bottom Dump Table      All types

4       WSM Natural Frequency           All types
        Vibrating Conveyors

3       WSM High Torque                 Trim ends, plywood & panel
        Shredders - Hopper Fed          trim, pallets & pallet scrap,
                                        blocks, plastic & misc.
                                        wood waste.

3       WSM High Torque                 Trim ends/edgings, plywood
        Shredders - Horizontally fed.   & panel trim/defect boards.

4       WSM Flat Oscillating Screens    Chips, sawdust, and bark

4       WSM Disc Scalping Screens       Chips, bark, and other types
                                        of wood waste

Williams Patent Crusher & Pulverizer Co., 2701 N. Broadway, St. Louis,
MO 63102 Tel: (314) 621-3348 Fax: (314) 436-2639

3       Model C-32 "No-Nife" Hog        Wastewood and bark

3       460 Refuse Shredder             Wood, bark or other waste

3       Ripshear shredder               Bulky pallets, crates,
                                        skids, plywood

3       No-Nife Wood Hog                All types wood scrap & bark

3       Hammermills: GP, Rocket,        Hogged fuel, shavings,
        Meteor models                   chips, paper

Type    Model Name/No.                  Manufacturer Comments

Advanced Recycling Equipment, 850 Washington Road, St. Marys, PA 15857
Tel: (814) 834-4470 Fax: (814) 834-3483

3       Challenger Hopper Feed          One ft. screen sections for
        Grinders CGG-100 - CG1000       ease of handling,
                                        programmable logic control,
                                        solid state control panel,
                                        Centrifugal clutch for
                                        effective power transfer.

3       Challenger Horizontal Feed      Variable speed infeed.
        Grinders CH-100 -- H-600        Perfect for in-line
                                        operations.

3       Challenger Diesel Power         Totally self-contained,
        Grinders in hopper and          mobile or stationary,
        horizontal                      hydrostatic drive.

5       Challenger Thermal              Meets all EPA standards,
        Combustion Systems              can provide warm air, hot
                                        steam and/or co-generation.

** American Pulverizer Co., 5540 W. Park Ave., St. Louis, MO 63110-1897
Tel: (314) 781-6100 Fax: (314) 781-9209

2, 3,   WC Series                       Top fed hammermills. Modify
6                                       to customer specifications.

2, 3,   WS Series                       Top fed hammermills. Modify
6                                       to customer specifications.

2, 3,   HWC Series                      Horizontal feed wood hogs.
6                                       Modify to meet customer
                                        specifications.

2, 3,   Slow Speed Shredders            Port. & station, shear type
4, 6                                    shredders for reducing
                                        demo decks & RR ties. Diesel
                                        or electric drive.

Bruning & Federle Mfg. Co., P.O. Box 5547, Statesville, NC 28687
Tel: (704) 873-7237 Fax: (704) 878-0647

4, 6                                    Design, fabrication &
                                        installation of dust
                                        collecting and pneumatic
                                        conveying systems.

Capital Machines International, 2801 Roosevelt Ave., Indianapolis,
IN 46218 Tel: (317) 638-6661 Fax: (317) 636-5122

3       #30 Knife Hogs-30" w, 5 heads   Compact, quiet, long life,
        #42 Knife Hogs-42" w, 7 heads   low hp requirements
                                        (30-50 hp); can be supplied
                                        with blower to direct cut
                                        waste veneer to fire box or
                                        storage.

Carter Day Intl., 500 73rd. Ave. NE, Minneapolis,
MN 55432 Tel: (763) 571-1000 Fax: (763) 571-3012

3       Horizontal feed Wood Hog        Heavy duty, simple design,
        HF 2410, HF 2425, HF 2435       fewer moving parts, low
                                        maintenance, efficient, low
                                        operator, cost.

3       Vertical feed Wood Hog          Multi-purposes hog.
        VF 2410, VF 2425, VF 2435

3       3/4 circle Hammermill,          Quick change screen, heavy
        CXT4215, CXT4226, CXT423,       duty w/ very low vibration.
        CXT4242, CXT3648

3       Halfcircle Commander            Heavy duty mill for fine
        Hammermill, 2400, 2424,         grinding. Easily
        2436, 2442, 3024,               replaceable wear parts.
        3036, 4814, 4820, 4832, 4842

3       Full circle XLT Hammermill      Long lasting
        22 sizes avail.

3, 5    Air Swept Pulverizer, ASP16H,   Ultra fine grinder w/ no
        ASP22H, ASP28H, ASP38H,         screens, easily replaceable
        ASP48H, ASP80H                  parts. Can grind and dry in
                                        one operation.

3       Pallet Shredder, PS 2254        Slow speed, high torque
                                        shredder specifically
                                        designed for pallets.

CHIPTEC Wood Energy Systems, 48 Helen Ave., S. Burlington, VT 05403
Tel: (802) 658-0956 Fax: (802) 660-8904

        Bio-fuel Gasifiers A-Series     Among the hottest, cleanest,
        C-Series                        bio-fuel gasifiers and
        B-Series                        fuel handling systems.

        Fuel Handling Systems
        Poly Glide Moving Wedge Floor
        U.L. Controls
        Grinders, Dryers

** Clarke's Sheet Metal Inc., 660 Conger, P.O. Box 2428, Eugene,
OR 97402 Tel: (541) 343-3395 Fax: (541) 345-1447

4       Flo-Matic[R] Storage Bins and   Interface controller; Load
        Unloaders                       Search circuit; auger
                                        parking; negative sloped
                                        walls eliminate bridging.

4       Belt Conveyors, Chain           Complete line of belt
        Conveyors, Screw Conveyors,     conveyors; heavy-duty
        Pneumatic Conveyors             long-wearing chain conveyors
                                        for heavy loads, wet, dry,
                                        hot or cold; screw conveyors
                                        for moving materials
                                        horizontally, on an incline,
                                        or vertically; pneumatic
                                        material handling systems

7       Pneu-Aire[R] Filter             On ground, mounts on its own
                                        base; lightweight design for
                                        roof mounting; bag hanger
                                        assembly; emergency by-pass
                                        & abort gate; structurally
                                        superior.

4, 6    Rotary Classifier "CRC"         Designed to remove oversized
                                        pieces from unscreened chips,
                                        bark or hogged fuel to
                                        protect conveyors, metering
                                        bins and other equipment.

4, 6    Metering Bins                   Provide a metered, controlled
                                        flow of material to burner
                                        particleboard process, mixer,
                                        batcher & pneumatic conveying
                                        systems. Various types
                                        available.

4, 6    Reclaimers                      Uses include process
                                        materials for particleboard,
                                        flake-board, strandboard &
                                        hardboard; blending various
                                        species or particle sizes
                                        and fiber lengths by using
                                        multiple units; and for fuel
                                        into your energy generating
                                        system from outside storage.

4, 6    Rotary Grinder                  For waste wood reduction.

3       Falcon hog                      Easily processed large, long,
                                        solid wood & stringy bark;
                                        180[degrees] processing
                                        surface maximum volume.

** Cresswood Recycling Systems, 55 W. Lincoln Hwy., Cortland, IL 60112
Tel: (815) 758-7171 Fax: (815) 758-0733

        Destroyer                       Cresswood "Destroyer" low
                                        rpm, low hp grinders for
                                        abusive applications.
                                        Available in hopper fed or
                                        horizontal end feed models
                                        from 24" - 72" wide.

3       EF-12 (25, 30 hp)               Smallest member of product
        Horizontal End Feed             line. Low profile allows
                                        placement directly under a
                                        panel saw.

3       EF-24(30, 40, 50 hp)            Designed to eliminate waste
        Horizontal End Feed             edgings directly off gang
                                        ripsaws, small bandsaws and
                                        blocks from chop saws.

3       EF-30 (60, 75, 100 hp)          Large Rotor Series, direct
        Horizontal End Feed             drive for lower cost &
                                        greater output

3       EF-36 (50 hp)                   V-drive transmission.
        Horizontal End Feed             Grinding head speed of
                                        300-400 rpm for increased
                                        output requirements.

3       EF-50 (60, 75, 100 hp)          Large Rotor Series designed
        Horizontal End Feed             for greater output with
                                        smaller end product.
                                        Furniture, millwork,
                                        sawmills, pallet & truss
                                        companies.

3       EF-60 (75,100, 125 hp)          Large Rotor Series designed
        Horizontal End Feed             for greater output with
                                        smaller end product. Good
                                        for sawmills, pallet, truss,
                                        furniture mfg.

3       EF-72 (75,100, 125 hp)          Designed to accept PB and
        Horizontal End Feed             pallets up to 63" wide.

3       HF-36 (30, 40 hp)               For companies needing to
        Hopper feed                     grind blocks & short boards
                                        up to 36". Custom hopper
                                        available.

3       HF-40 (40, 50, 60 hp)           For companies needing to
        Hopper Feed                     grind blocks & short boards
                                        up to 40". Custom hoppers
                                        available

3       HF-50 (40, 50, 60, 75 hp)       For companies needing to
        Hopper Feed                     grind blocks & short boards
                                        up to 50". Custom hopper
                                        available.

3       HF-60 (50, 60, 75, 100,         Designed for larger cabinet,
        125 hp)                         pallet, truss, & furniture
        Hopper Feed                     manufacturers. Choice of ram
                                        stroke length. Custom
                                        hoppers available.

3       HF-70 (100, 125, 150 hp)        The Mega Destroyer, designed
        Hopper Feed                     for larger cabinet, pallet,
                                        truss and furniture
                                        manufacturers. Custom
                                        hoppers available.

Decton Industrial Solid Fuel Systems, P.O. Box 369, Butler, WI 53007
Tel: (262) 781-5533 or (800) 246-1478 Fax: (262) 781-5593

5       Hot Air Furnace Maximum BTU     Features patented. "Thermo
        Output RF 24                    Combustor" clean-burn
5       RF 32                           process. Heavy duty cons-
5       DF 330                          truction with installation
5       DF 625                          of cast iron, stainless
5       DF 1250                         steel, firebrick, and
5       DF 2500                         refractory materials. All
                                        models can be hand fired or
                                        stoker fed and are tested
                                        and listed to U.L. safety
                                        standards by PFS Corp.

5       Automatic Stoker Systems        Includes the step grate
                                        burner, rotary air lock,
                                        final drive auger and gear
                                        drive, and control panel.

5       Hot Water/low-press steam
        boiler

4       Silos, Storage                  Standard storage bins: 100
                                        cubic feet and larger
                                        Features traveling bottom
                                        unloader for metering
                                        materials.

4       Woodwaste material handling &   Custom designed.
        unloading systems

5       Decton/EWI Burner               Simple Heat Recovery avail.
                                        (hot air, hot water, steam)
                                        particleboard and composite
                                        incineration our specialty.

Eurohansa Inc., P.O. Box 6416, High Point, NC 27262
Tel: (336) 885-1010 Fax: (336) 885-1011

3       ZTLL

3       ZMTHL

3       ZMTH

3       ZDV

Flying Dutchman Inc., 6631 Egypt Road, Smithville, OH 44677-9718
Tel: (330) 669-2297 Fax: (330) 669-2892

4       Flying Dutchman Bin Unloader    Can build to specifications.
        2003 and 2004                   Boiler feeding, truck
                                        loading.

4       Flying Dutchman Bin Unloader    Can build to specifications.
        3003, 3004, 3005                Boiler feeding, truck
                                        loading.

4       Flying Dutchman Silo Unloader   Can build to specifications.
        4043/4004                       Boiler feeding, rapid truck
                                        loading.

4       Flying Dutchman Silo Unloader   Can build to specifications.
        4045/4055                       Boiler feeding, rapid truck
                                        loading.

4       Flying Dutchman Silo Unloader   See above
        4074

Globe Machine Mfg. Co., P.O. Box 2274, Tacoma, WA 98401
Tel: (253) 383-2584 Fax: (253) 572-9672

3       Model 8A Hogs                   Knife type hogs.

6       Model 65Q automatic pallet      Designed to nail and cut
        stock and bunk block machine    panels auto.; stacking of
                                        finished bunk blocks is
                                        accomplished semi-auto. by
                                        a single operator.

Jeffrey Specialty Equipment Corp., 398 Willis Rd., Woodruff, SC 29388
Tel: (864) 476-7523 Fax: (864) 476-7510

4       K.D. Kinetic Drive              Soft start low horsepower;
                                        specifically for wood
                                        applications.

4       LMV, MMV, HMV                   Positive stroke, non-
                                        balanced, must have stable
                                        concrete foundation.

4       RMV Conveyor-Reactive           Soft start, low horsepower,
        Mechanical Vibrating            balanced. No vibrations
        (Isolated)                      transmitted to supporting
                                        structure.

3       30 SS, 34 SS, 45 SS, 54 SS      Steel box construction.
                                        Replaceable breaker plate
                                        liner, anti-friction
                                        bearings, heavy-duty rotor.

3       30WB, 34WB, 34WBS               Steel rigid box construction;
                                        interiors protected
                                        by heavy replaceable drilled
3       45WB                            & tapped steel liners; all
                                        units have integral metal
3       54WB, 55WB                      traps, anti-friction bearings
                                        & heavy duty rotors. Shaft
                                        is equipped with a hydraulic
3       56WB, 58WB                      bearing assembly & removal
                                        feature for 34WBS and larger.

3       59WB

3       610WB

3       66WB, 68WB

3       6WB, 79WB

3       Rechippers                      Hammermill type rechipper
                                        with features listed above.

3       Semi-Refiners                   Hammermill type shredder
                                        with features listed above.
                                        Available in stainless steel
                                        or stainless steel interior.

        WBH Horizontally Fed            Wood Hog w/ feed table and
        Wood/Bark Hog                   patented controlled feed.

        Solid Waste Shredders           Steel Rigid Box Interiors
                                        protected by heavy,
                                        replaceable liners. Solid
                                        Waste Shredder rotors.

Laidig Systems Inc., 14535 Dragoon Trail, Mishawaka, IN 46544
Tel: (574) 256-0204 Fax: (574) 256-5575

4       System 243 silo & unloader      Double sweep rugged silo
                                        unloading system.

4       System 533 silo & unloader      Single sweep auger, track
                                        driven silo unloading
                                        system.

4       System 298 silo & unloader      Heavy duty single sweep
                                        auger, track driven silo
                                        unloading system.

4       System 598 silo & unloader      Rugged, heavy duty, single
                                        sweep auger, track
                                        driven silo unloading system

4       System 1098 silo & unloader     Rugged, heavy duty single
                                        sweep auger silo
                                        unloading system.

        Cone Bottom Silo &              Single cone bottom sweep
        Unloader Systems                auger, silo & unloader

MAC Equipment, 7901 NW 107th Terrace, Kansas City, MO 64153-1910
Tel: (888) 821-2476 Fax: (816) 891-8336

6       Fabricated airlocks, sizes:     6-vane carbon steel,
        FS10 x 8, FS12 x 10, FS16 x     urethane flextip
        12, FS20 x 15, FS24 x 24,       sandwich rotor.
        FS30 x 30, FS36 x 36, FR16
        x 12, and FR20 x 16 with
        square and round inlets
        respectively

7       MWP & MCF Filters               Dry filtration, available in
                                        single units, top bag removal
                                        feature.

Montgomery Industries International, P.O. Box 3687, Jacksonville,
FL 32206 Tel: (904) 355-5671 Fax: (904) 355-0401

3       Montgomery Bio-Hog--            Punch & the cutting action
        integral fan model              guarantees uniformity of
                                        product w/min. of lines; hard
        Montgomery Eat-Rite Hog--       faced teeth & anvils for
        arranged for bottom discharge   extra long life; removable
                                        particle-sizing screens can
                                        optimum size fuels; all
                                        units have built-in
                                        protection against damage
                                        from tramp metal.

3       Montgomery K.C, Model           In utilization of bark waste
        Eat-Rite Hog--arranged for      burned in suspension, it is
        bottom discharge                required that 100% of the
                                        bark pass a 3/4" screen.

3       20, 40, 60 LRW Series Low       Fully automated, computer
        Speed Woodwaste Grinders        controlled.

3       Montgomery Spiral Design        Spiral design produces
        Hammer Hog                      balanced rotor with reduced
                                        starting loads and lower hp
                                        requirements than
                                        conventional swing hammer
                                        hogs. Steel hammers
                                        maybe reversed for long wear
                                        and are individually
                                        replaceable (one at a time).

3       FS Hog Series

Newman Machine Co., P.O. Box 5467, Greensboro, NC 27435-0467
Tel: (336) 273-8261 Fax: (336) 273-6939

3       SS-24                           Processes scrap material into
        SS-30                           shavings for animal bedding
                                        industry.

Pallmann Pulverizers Co. Inc., 820 Bloomfield Ave., Clifton, NJ 07012
Tel: (973) 471-1450 Fax: (973) 471-7152

3       PSN Re-chipper                  Mechanical or handfeeding
                                        possible; material chipped
                                        between rotor knives and bed
                                        knife; screen controls
                                        article size of product;
                                        rotor is dynamically
                                        balanced.

3       Knife Mills                     Sturdy design; pre-adjusted
                                        knives; fast selection of
                                        final particle size by simple
                                        screen change; low power req.

3       Drum Chippers                   Reliable feeding system;
                                        large feed rollers;
                                        hydraulic dampers; modern
                                        rotor design; secure
                                        knife installation.

3       Drum Shredder                   Insensitive to foreign matter
                                        in material; low operating
                                        cost; low maint.; high
                                        capacity; fast screen change.

3       Hammer Mills                    Simple design; high capacity;
                                        economical; full use of
                                        entire grinding area; easy
                                        screen change.

** The Ram Group Inc., 13520 S. Chippewa Trail, Lockport, IL 60441
Tel: (708) 301-0660 Fax: (708) 301-0669

3       Scan Hugger HL2/5/5             Low hp, low rpm low noise
                                        grinder. "Chip pocket"
                                        rotor with indexable knives.
                                        U.S. motors and PLC controls.

3       Scan Hugger HL2/7/10            Same as above.

3       Scan Hugger HL3/7/10            Same as above.

3       Scan Hugger HL3/10/12           Same as above.

3       Scan Hugger HL3/10/16           Same as above.

3       Scan Hugger HL4/14/13           Same as above.

3       Scan Hugger HL4/14/20           Same as above.

3       HT20/25/2                       Same as above.

3       Scan Hugger HL4/18/25           Same as above.

3       Scan Hugger HL35/30             Custom wood waste material
                                        handling systems for use with
                                        ripsaws, optimizing cut-off
                                        saws & panel saws.

3       Scan Hugger HT 30/20            Same as above.

3       Scan Hugger HT35/40             Same as above.

3       Scan Hugger HT45/60             Same as above.

3       Scan Hugger HL55/40             Same as above.

3       Scan Hugger HK35/10             Same as above.

4       Pneumatic conveying systems

4       Material handling conveyors

1       Spark detection systems

5       Ranheat Eng. Ltd.               Ranheat Eng. specializes in
                                        the specification, design
                                        manufacture & installation
                                        of a range of ind. wood
                                        burning systems. Exceeds EPA
                                        stds. & allowable emissions.

Resource Conservation Group, 1921 State St., East Petersburg, PA 17520
Tel: (717) 569-2499 Fax: (717) 569-8977

3       Wood Power Products

5       Wood Power Products             DER compliant.

Schutte-Buffalo Hammer Mill, 61 Depot St., Buffalo, NY 14206
Tel: (716) 855-1555 Fax: (716) 855-3417

3       HZF Series                      Sawdust bedding, boiler
                                        fuel, mulch.

3       Bark Grinder Series             Boiler fuel, mulch.

3       13 & 15 Series                  Sawdust, mulch, bedding.

Tryco/Untha, P.O. Box 1277, Decatur, IL 62525-1277
Tel: (217) 864-4541 Fax: (217) 864-6397

        LR-630                          Cabinet & truss plants.

        LR-700                          80dB @ 90 rpm.

        LR-1000                         80dB @ 90 rpm.

        LR-1400                         80dB @ 90 rpm.

        MR-1500                         High volume applications.

        MR-2000                         High volume applications.

        MR-2500                         High volume applications.

        XR-3000                         C& D applications.

        RS30-450                        Thicknesses to 6 inch and
                                        any length.

        RS40-750                        Thicknesses to 8 inch and
                                        any length.

        RS40-960                        As above but higher capacity
                                        output.

        RS-50                           For high volume grinding of
                                        all woods.

Vecoplan LLC, P.O. Box 7224, High Point, NC 27264
Tel: (336) 861-6070 Fax: (336) 861-4329

3       ReTech RG24/20 Starfeed         For small shop and small
                                        manufacturing cells.

3       ReTech RG32 Shorty              For small shop and small
                                        manufacturing cells.

3       ReTech RG32/20 U                For small shop and small
                                        manufacturing cells.

3       ReTech RG42/30 U                For medium-size plants.

3       ReTech RG52 U                   For medium-size plants.

3       ReTech RG52 Shorty              For medium-size plants.

3       ReTech RG52 Stretch             For medium-size plants.

3       ReTech RG62 U                   For large applications.

3       ReTech RG78 K                   For large applications.

3       ReTech RG98 U                   For large applications.

3       ReTech RG98 K                   For large applications and
                                        recyclers.

3       ReTech VH 14                    For panel saws and ripsaws.

3       ReTech VH 18                    For panel saws and ripsaws.

3       ReTech VH 25                    For panel saws and ripsaws.

3       ReTech VH 34                    For panel saws and ripsaws.

3       ReTech VH 50                    For large horizontal
                                        applications.

** Weima America Inc., 3678 Centre Circle, Fort Mill, SC 29715
Tel: (888) 440-7170 or (803) 802-7170 Fax: (803) 802-7098

3       Woodchuck                       Introductory grinders.

3       ECO 1-3                         Designed for small shops.

3       Mole                            Small/medium shops.

3       WL 4-4S & WL 6-6S               Small/medium shops -2 row
                                        of knives.

3       WL 10 - 20                      Large volume applications.

3       WL 12-30 Jumbo,Super Jumbo      Extra large volumes.

3       Woodwolf System                 2 machine solution.

3       Tornado                         Large volume applications.

3       Crocodile 1500 - 2200           Large volume applications.

3       Beaver 400-1600                 Next to panel saw or in CNC
                                        nested based mfg.

3       Horizontal Beaver 400-1600      Place in between panel saw /
                                        ripsaw application.

3       Jaguar 400-1300                 Majority of strips with mix
                                        of cutoffs / blocks.

3       Tiger 400-1500                  Can handle a 50/50 mix of
        Jumbo & Super Jumbo             strips & blocks.

3       Puma 400-800                    Designed to handle a variety
                                        of shapes & sizes.

3       Leopard 400-1000                Large volume applications of
        Jumbo & Super Jumbo             variable sizes.

        TH200-300                       Designed for small to medium
                                        shops.

        TH 400-TH 700 (Duo)             Designed for medium to
                                        larger applications.

Wellons Inc., 2525 W. Firestone Lane, Vancouver, WA 98660
Tel: (360) 750-3500 Fax: (360) 750-3400

1, 4,   Wellons storage bins,           Exclusive powered rotating
5, 6,   Models A-13, A-17, 1-19,        agitator, positive ratchet
7       A-21, A-24 & A-30.              drive, level controls, auto.
                                        operation negative sloped
                                        largest silo bin requires
                                        only 10-1/2 hp.

** West Salem Machinery Co., 665 Murlark Ave. N.W., Salem, OR 97304
Tel: (503) 364-2213 Fax: (503) 364-1398

3       4032BH, 4040BH, 4048BH
        4064BH
        4848BH, 4864BH

3       WSM Vertical Wood/Bark Hogs     Heavy duty hog features
        2412B, 2420B, 2432B,            include alloy steel hammers
        2838B                           abrasion resistant wear
        3240B                           liners and screens, and
        4032B, 4040B, 4048B, 4064B      rugged rotor construction.
        4848B, 4864B

3       WSM Waste Wood Chipper          Stationary waste wood
                                        chipper. Available in
                                        horizontal or drop feed,
                                        with top or bottom discharge.

4       WSM Live Bottom Dump Table      Receives material from
                                        self-dumping totes.

4       WSM Natural Frequency           Natural frequency vibrating
        Vibrating Conveyors             conveyors are available with
                                        fiberglass or steel coil
                                        springs.

3       WSM High Torque                 High torque, low-speed
        Shredders - Hopper Fed          shredder offers batch feeding
                                        of many types of waste.

3       WSM High Torque                 High torque, low-speed
        Shredders - Horizontally fed.   shredder offers controlled
                                        metered feed of long
                                        material.

4       WSM Flat Oscillating Screens    Precise classifier provides
                                        multiple product
                                        classifications.

4       WSM Disc Scalping Screens       High volume, rough
                                        classifier.

Williams Patent Crusher & Pulverizer Co., 2701 N. Broadway, St. Louis,
MO 63102 Tel: (314) 621-3348 Fax: (314) 436-2639

3       Model C-32 "No-Nife" Hog        No knives to sharpen, welded
                                        steel frame, ruggedly built

3       460 Refuse Shredder             Large-sized uncrushables
                                        removed via a ballistic
                                        rejection hood.

3       Ripshear shredder               Slow speed, high torque, jam
                                        proof, shear-type shredding
                                        with hydraulic drive.

3       No-Nife Wood Hog                Cast alloy steel hammer,
                                        breaker plates & grate bars.
                                        Hydraulic cover opening for
                                        quick access & servicing.

3       Hammermills: GP, Rocket,        Economical fine grinding to
        Meteor models                   uniform controlled product
                                        size.

Type Code: Numbers in "Type" column are keyed to use
descriptions below:

1. Computer Control Systems
2. Wood & Bark Processing & Harvesting
3. Hogs, Pulverizers, Chippers, Grinders & Crushers
4. Wood Waste Storage & Handling
5. Wood Waste Heating Systems, Furnaces, Boilers, Fluidized Bed Burners
6. Wood Waste Systems & Equipment
7. Scrubbing Systems, Filters
COPYRIGHT 2007 Vance Publishing Corp.
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2007, Gale Group. All rights reserved. Gale Group is a Thomson Corporation Company.

Article Details
Printer friendly Cite/link Email Feedback
Title Annotation:CHAPTER 7
Publication:Wood & Wood Products
Date:Mar 15, 2007
Words:25179
Previous Article:Gluing, laminating & veneering.
Next Article:Fasteners, hardware, portable tools, etc.
Topics:


Related Articles
Creativity finishes first at UltraCraft.
Scott Equipment Co.
Harden Furniture's Proof Is in the Finish.
RED BOOK Remains The Industry Leader.
WOOD COLLECTION, CONVERSION & DRYING.
FINISHING EQUIPMENT & MATERIALS.
Adirondack slashes wood drying from 80 days to 80 hours. (From the Archives).
Wood collection, conversion & drying.
Getting wise.
Finishing equipment & materials.

Terms of use | Privacy policy | Copyright © 2021 Farlex, Inc. | Feedback | For webmasters |