Printer Friendly

WestJet 737NGs covered by FAA airworthiness directive.

AIRLINE INDUSTRY INFORMATION-(C)1997-2013 M2 COMMUNICATIONS

Canadian carrier WestJet said it is aware of the US Federal Aviation Administration's airworthiness directive released to all Boeing (NYSE: BA) Next-Generation 737 operators.

The directive, which is not related to any event or occurrence, refers to an issue with the protective coating on pins located in the horizontal stabilizer rear spar, which attach the main stabilizers to the fuselage.

An aircraft's horizontal stabilisers control its ability to ascend, maintain level flight and descend.

The directive calls for Boeing operators to replace only those pins having a specific part number with an improved version prior to the aircraft reaching 56,000 cycles (take-offs and landings). Currently, the oldest WestJet aircraft is nowhere near that, at less than 20,000 cycles.

WestJet said it complies with all applicable directives issued by the country where the aircraft is manufactured, in addition to any applicable airworthiness directives issued by Transport Canada, European Aviation Safety Industry and the Federal Aviation Administration.

Find out more at www.westjet.com.

((Comments on this story may be sent to aii.feedback@m2.com)).END.PUB430>PDApril 18, 2013>JNAIRLINE INDUSTRY INFORMATION.PRICEDATENOT APPLICABLE.DAY
COPYRIGHT 2013 Normans Media Ltd.
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2013 Gale, Cengage Learning. All rights reserved.

Article Details
Printer friendly Cite/link Email Feedback
Publication:Airline Industry Information
Date:Apr 18, 2013
Words:194
Previous Article:GOL posts March PRASK increase.
Next Article:-Southern Air exits US Chapter 11 protection.
Topics:

Terms of use | Privacy policy | Copyright © 2021 Farlex, Inc. | Feedback | For webmasters |