| Title |
Author |
Type |
Date |
Words |
| The effect of annealing of milled carbon fibers on the mechanical and tribological properties of solid-lubricant thermoplastic polyimide-based composites. |
Panin, S.V.; Luo, J.; Alexenko, V.O.; Buslovich, D.G.; Kornienko, L.A.; Bochkareva, S.A.; Panov, I.L |
Report |
Nov 1, 2020 |
6935 |
| Stability Analysis for Milling Process with Variable Pitch and Variable Helix Tools by High-Order Full-Discretization Methods. |
Zhang, Yang; Liu, Kenan; Zhao, Wuyun; Zhang, Wei; Dai, Fei |
Report |
Aug 31, 2020 |
7946 |
| Wear Identification of Vibration Drilling Bit Based on Improved LMD and BP Neural Network. |
Shi, Yaochen; Liu, Hongyan; Zhang, Xuechen; Li, Qinghua; Guo, Xiaocheng |
Report |
Aug 31, 2020 |
5495 |
| A History-Dependent Frictional Contact Problem with Wear for Thermoviscoelastic Materials. |
Chouchane, Lamia; Selmani, Lynda |
Report |
Sep 1, 2019 |
7027 |
| Modelling of impact-abrasive wear of ceramic, metallic, and composite materials/Keraamiliste, metalsete ja komposiitmaterjalide abrasiivkulumise modelleerimine. |
Rahmani, Ramin; Antonov, Maksim; Kamboj, Nikhil |
Report |
Jun 1, 2019 |
1472 |
| Wear of potential tool materials for aluminium alloys friction stir welding at weld temperatures/Alumiiniumi otshoordkeevituse tooriista potentsiaalsete materjalide kulumine keevitustemperatuuril. |
Kolnes, Mart; Kubarsepp, Jakob; Sergejev, Fjodor |
Report |
Jun 1, 2019 |
3435 |
| Influence of the Milling Cutter Diameter on the Cutting tool Life when Machining Inconel 718. |
Zetek, Miroslav; Vozar, Vojtech; Baksa, Tomas; Zetkova, Ivana |
Report |
Jan 1, 2018 |
2676 |
| Influence of Cutting Conditions on the Surface Quality and Grinding Wheel Wear during Cylindrical Grinding of Inconel 718. |
Baksa, Tomas; Hronek, Ondrej; Farsky, Jindrich; Zetek, Miroslav |
Report |
Jan 1, 2018 |
2984 |
| The Influence of CAM Strategies on the Tool Wear and Surface roughness. |
Zaujec, Rudolf; Vopat, Tomas; Simna, Vladimir; Pokorny, Peter |
Report |
Jan 1, 2018 |
4050 |
| Tribology and Mechanical Properties of Carbon Fabric/MWCNT/Epoxy Composites. |
Shivamurthy, B.; Murthy, Krishna; Anandhan, S. |
Report |
Jan 1, 2018 |
4440 |
| Processing and Wear Behaviour of 3D Printed PLA Reinforced with Biogenic Carbon. |
Ertane, Ertan G.; Dorner-Reisel, Annett; Baran, Ozlem; Welzel, Thomas; Matner, Viola; Svoboda, Stefa |
Report |
Jan 1, 2018 |
6555 |
| Effect of Size of Multiwalled Carbon Nanotubes Dispersed in Gear Oils for Improvement of Tribological Properties. |
Chebattina, Kodanda Rama Rao; Srinivas, V.; Rao, N. Mohan |
Report |
Jan 1, 2018 |
6260 |
| Effect of Tungsten Carbides on Abrasive Wear of Hardfacing Coatings. |
Pichler, Philip; Leitner, Martin; Grun, Florian; Hassler, Jurgen |
Report |
Jan 1, 2018 |
4971 |
| Comparative Experimental Study of Tribo-Mechanical Performance of Low-Temperature PVD Based TiN Coated PRCL Systems for Diesel Engine. |
Uddin, Ghulam Moeen; Kamran, Muhammad Sajid; Ahmad, Jawad; Ghufran, Muhammad; Asim, Muhammad; Zafar, |
Report |
Jan 1, 2018 |
6693 |
| Prediction of Wear of Woodworking Tools Depending of the Chip Thickness by Boundary Element Method Simulation. |
Busuladzic, Ibrahim; Horman, Izet; Hajdarevic, Seid |
Report |
Jan 1, 2018 |
2991 |
| Evaluation of Fretting Wear Behavior of PEEK by Analyzing the Change of Crystallinity: The High Temperature Effect. |
Wang, Qiufeng; Wang, Yunxia; Wang, Hongling; Fan, Na; Wang, Mengjiao; Yan, Fengyuan |
Report |
Dec 1, 2017 |
4726 |
| Experimental Research on Parameter Optimization for High Efficiency Hard Turning of Ultrahigh Strength Steel 42CrMo. |
Yan, Pei; Zhu, Junyi; Peng, Zeyu; Wang, Peng; Jiao, Li; Wang, Xibin |
Report |
Nov 1, 2017 |
2488 |
| Fundamental Understanding of Antiwear Mechanisms in Real-World Applications: Part 1. |
Smith, Oliver M.; Nguyen, Nga; Delbridge, Ewan; Burrington, James; Guo, Binbin; Hanthorn, Jason; Zha |
Report |
Nov 1, 2017 |
4257 |
| Fundamental Understanding of Antiwear Mechanisms in Real-World Applications: Part 2. |
Smith, Oliver M.; Nguyen, Nga; Delbridge, Ewan; Burrington, James; Guo, Binbin; Hanthorn, Jason; Zha |
Report |
Nov 1, 2017 |
4271 |
| Enhanced Anti-Wear Performance Induced by Innovative Base Oil in Low Viscosity Engine Oil. |
Champagne, Nicolas; Obrecht, Nicolas; Gangopadhyay, Arup; Zdrodowski, Rob; Liu, Z. |
Report |
Nov 1, 2017 |
4634 |
| A Study of the Disc Scoring Generation Principle and Reduction. |
Jeong, ByeongUk; Ryu, Hyong Tae; Jung, Kwang Ki; Kim, Chang Jin |
Report |
Oct 1, 2017 |
4153 |
| Brake System Performance at Higher Mileage. |
Antanaitis, David B.; Robere, Matthew |
Report |
Oct 1, 2017 |
8078 |
| Fractal Model of Normal Contact Stiffness between Two Spheres of Joint Interfaces with Simulation. |
Shen, Jingfang; Xu, Sha; Liu, Wenwei; Yang, Jiajun |
Report |
Sep 1, 2017 |
5017 |
| Corrosion and wear behavior of alumina-polyester nanocomposite coatings. |
Golgoon, A.; Aliofkhazraei, M.; Toorani, M.; Moradi, M.H.; Rouhaghdam, A. Sabour |
Report |
Aug 1, 2017 |
8237 |
| Wear behaviour of sintered steels obtained using powder metallurgy method. |
Erden, M.A.; Gunduz, S.; Karabulut, H.; Turkmen, M. |
Report |
Jul 1, 2017 |
4279 |
| Wear of cemented tungsten carbide (WC) router cutters during oak wood milling. |
Kazlauskas, D.; Jankauskas, V.; Bendikiene, R.; Keturakis, G.; Macenaite, L. |
Report |
May 1, 2017 |
2957 |
| Impacts of Biodiesel on the Durability of an Advanced After-Treatment Diesel Engine. |
Ku, Yong-Yuan; Lu, Jau-Huai; Lin, Ko Wei |
Technical report |
Apr 1, 2017 |
5928 |
| Investigation and Analysis of Wear in a 3.6L V6 Gasoline Engine: Phase I - Use of Radioactive Tracer Technology. |
Gauba, Varun; Bera, Tushar; Reitz, Jannik; Hansen, Gregory; Lee, Peter; Wileman, Craig; Nelson, Edwa |
Technical report |
Apr 1, 2017 |
5112 |
| Application of the Empirical Mode Decomposition method for the prediction of the tool wear in turning operation. |
Babouri, Mohamed Khemissi; Ouelaa, Nouredine; Djebala, Abderrazek |
Report |
Mar 1, 2017 |
3895 |
| Analysis of wheel-rail contact under partial slip and low speed conditions. |
Ozdemir, Y.; Voltr, P. |
Report |
Jan 1, 2017 |
3463 |
| Wear Characteristics of the Material Specimen and Method of Predicting Wear in Floating Spline Couplings of Aero-Engine. |
Xue, Xiangzhen; Wang, Sanmin; Yu, Jie; Qin, Liyun |
Report |
Jan 1, 2017 |
5826 |
| Nonlinear Dynamics Response of a Planar Mechanism with Two Driving Links and Prismatic Pair Clearance. |
Wu, Lijuan; Marghitu, Dan B.; Zhao, Jing |
Report |
Jan 1, 2017 |
6000 |
| Study on Rail Profile Optimization Based on the Nonlinear Relationship between Profile and Wear Rate. |
Wang, Jianxi; Ren, Zhiqiang; Chen, Jinjie; Chen, Long |
Report |
Jan 1, 2017 |
6979 |
| Rapid Analyses of Polyetheretherketone Wear Characteristics by Accelerated Wear Testing with Microfabricated Surfaces for Artificial Joint Systems. |
Su, Chen-Ying; Kuo, Chien-Wei; Fang, Hsu-Wei |
Report |
Jan 1, 2017 |
2979 |
| Increase Of Wear And Fretting Resistance Of Mining Machinery Parts With Regular Roughness Patterns. |
Krasnyy, Viktor; Maksarov, Viacheslav; Olt, Juri |
Report |
Jan 1, 2017 |
2727 |
| Tribological testing of polymeric material. |
Kubatova, Dana; Melichar, Martin; Pereira, Alejandro |
Report |
Jan 1, 2017 |
2175 |
| Machining of Inconel 718 Using Uncoated Cutting Tools with Different Cutting Edge Quality. |
Baksa, Tomas; Schornik, Vaclav; Adamek, Pavel; Zetek, Miroslav |
Report |
Jan 1, 2017 |
2582 |
| Low-viscosity gear oil technology to improve wear at tapered roller bearings in differential gear unit. |
Mori, Takafumi; Suemitsu, Masanori; Umamori, Nobuharu; Sato, Takehisa; Ogano, Satoshi; Ueno, Kenji; |
Report |
Nov 1, 2016 |
2061 |
| Fretting Analysis of an Engine Bearing Cap Using Computer Simulation. |
Sato, Kenji; Hamakawa, Takeru; Yamasaki, Takeyuki; Ishihara, Yoshimichi; Hashimoto, Hisashi; Shi, Ch |
Technical report |
Sep 1, 2016 |
2478 |
| Development of an e-LSD Control Strategy Considering the Evolution of the Friction Torque with the Wear Depth. |
Tesi, Amedeo; Vinattieri, Francesco; Capitani, Renzo; Annicchiarico, Claudio |
Technical report |
Sep 1, 2016 |
5098 |
| Increase of wear and fretting resistance of mining machinery parts with regular roughness patterns. |
Krasnyy, Viktor; Maksarov, Viacheslav; Olt, Juri |
Report |
Jan 1, 2016 |
2686 |
| Fuel dosage irregularity of LPG pulse vapor injectors at different stages of wear. |
Szpica, D. |
Report |
Jan 1, 2016 |
4083 |
| Brake squeal and wheel dust vs. disc wear: No-copper, low-copper and high-copper NAOs. |
Sriwiboon, Meechai; Tiempan, Nipon; Kaewlob, Kritsana; Rhee, Seong |
Report |
Jan 1, 2016 |
3382 |
| Identification of organic compounds released from low-metallic automotive model brake pad and its non-airborne wear particles. |
Placha, Daniela; Peikertova, Pavlina; Kukutschova, Jana; Lee, Poh Wah; Cabanova, Kristina; Karas, Ji |
Report |
Jan 1, 2016 |
8373 |
| Influence of the automotive brake wear debris on the environment - a review of recent research. |
Peikertova, Pavlina; Filip, Peter |
Report |
Jan 1, 2016 |
16383 |
| A study on emission of airborne wear particles from car brake friction pairs. |
Alemani, Mattia; Nosko, Oleksii; Metinoz, Ibrahim; Olofsson, Ulf |
|
Jan 1, 2016 |
6680 |
| Data-driven simulations of flank wear of coated cutting tools in hard turning. |
Cakan, A.; Evrendilek, F.; Ozkaner, V. |
Report |
Nov 1, 2015 |
6203 |
| Influence of the forging process of the machined material on the cutting tool life. |
Zetek, Miroslav; Zetkova, Ivana |
Report |
Jan 1, 2015 |
1815 |
| Effect of friction and wear parameters on acrylonitrile butadiene styrene/aluminum-boron carbide-glass spheres polymer composites/Trinities ir dilimo parametru itaka akronitrilo butadieno styreno/aliuminio boro karbido-sferinio stiklo polimeru kompozitams. |
Tasdemir, Munir; Babat, Volkan; Yerlesen, Umut |
Report |
Jul 1, 2014 |
3533 |
| Temporal and frequential analysis of the tools wear evolution/Irankiu dilimo evoliucijos laikine ir daznine analize. |
Babouri, M.K.; Ouelaa, N.; Djebala, A. |
Report |
Mar 1, 2014 |
3450 |
| Effect of multipath laser shock processing on microhardness, surface roughness, and wear resistance of 2024-T3 al alloy. |
Kadhim, Abdulhadi; Salim, Evan T.; Fayadh, Saeed M.; Al-Amiery, Ahmed A.; Kadhum, Abdul Amir H.; Moh |
Report |
Jan 1, 2014 |
2893 |
| A new automated way to measure polyethylene wear in THA using a high resolution CT scanner: method and analysis. |
Maguire, Gerald Q., Jr.; Noz, Marilyn E.; Olivecrona, Henrik; Zeleznik, Michael P.; Weidenhielm, Lar |
Report |
Jan 1, 2014 |
5010 |
| Investigation of micro- and nanosized particle erosion in a 90[degrees] pipe bend using a two-phase discrete phase model. |
Safaei, M.R.; Mahian, O.; Garoosi, F.; Hooman, K.; Karimipour, A.; Kazi, S.N.; Gharehkhani, S. |
Report |
Jan 1, 2014 |
5578 |
| Enhancement of the wear resistance and microhardness of aluminum alloy by Nd:YaG laser treatment. |
Hussein, Haitham T.; Kadhim, Abdulhadi; Al-Amiery, Ahmed A.; Kadhum, Abdul Amir H.; Mohamad, Abu Bak |
Report |
Jan 1, 2014 |
2204 |
| Interference assembly and fretting wear analysis of hollow shaft. |
Han, Chuanjun; Zhang, Jie |
Report |
Jan 1, 2014 |
3650 |
| Processing parameters influence on wear resistance behaviour of friction stir processed Al-TiC composites. |
Akinlabi, E.T.; Mahamood, R.M.; Akinlabi, S.A.; Ogunmuyiwa, E. |
Report |
Jan 1, 2014 |
6195 |
| Wear behaviour of nanocrystalline [Fe.sub.88][Si.sub.12] alloy in water environment. |
Fu, Licai; Yang, Jun; Bi, Qinling; Liu, Weimin |
Report |
Jan 1, 2014 |
3817 |
| Microstructural characterization and wear properties of Fe-based amorphous-crystalline coating deposited by twin wire arc spraying. |
Arizmendi-Morquecho, Ana; Leyva-Porras, Araceli Campa-Castilla C.; Martinez, Josue Almicar Aguilar; |
Report |
Jan 1, 2014 |
5423 |
| Tribological behavior of [Si.sub.3][N.sub.4]/[Ti.sub.3]Si[C.sub.2] contacts lubricated by lithium-based ionic liquids. |
Wang, Haizhong; Song, Zenghong; Qiao, Dan; Feng, Dapeng; Lu, Jinjun |
Report |
Jan 1, 2014 |
4515 |
| Effect of silicon addition on high-temperature solid particle erosion-wear behaviour of mullite-SiC composite refractories prepared by nitriding reactive. |
Li, Xiaochao; Chen, Shusen; Huang, Zhaohui; Fang, Minghao; Liu, Yan'gai; Wu, Xiaowen; Huang, Juntong |
Report |
Jan 1, 2014 |
4192 |
| Effect of filler content on the performance of epoxy/PTW composites. |
Sudheer, Mudradi; Prabhu, Ravikantha; Raju, Kandavalli; Bhat, Thirumaleshwara |
Report |
Jan 1, 2014 |
7711 |
| Sliding wear of TiC-NiMo and [Cr.sub.3][C.sub.2]-Ni cermet particles reinforced FeCrSiB matrix HVOF sprayed coatings/TiC-NiMo ja [Cr.sub.3][C.sub.2]-Ni kermiste osakestega armeeritud FeCrSiB maatriksiga kiirleekpihustatud pinnete liugekulumine. |
Surzhenkov, Andrei; Antonov, Maksim; Goljandin, Dmitri; Vilgo, Timo; Mikli, Valdek; Viljus, Mart; La |
Report |
Sep 1, 2013 |
2445 |
| An analytical wear model based on cad measurements in polyamide pinion under different working environments/Ivairiomis salygomis dirbancio poliamidinio krumpliaracio analitinis modelis, paremtas cad matavimais. |
Bounamous, B.; Ghalloudj, W.; Amirat, A.; Chateauneuf, A.; Chaoui, K. |
Report |
Jul 1, 2013 |
4338 |
| Steel abrasive wear forecasting by wearing surfaces microgeometric parameters/Plienu abrazyvinio dilimo prognozavimas pagal dylancio pavirsiaus mikrogeometrinius parametrus. |
Jankauskas, V.; Skirkus, R. |
Report |
Jul 1, 2013 |
2824 |
| Experimental Study on the Morphology of Keratin Based Material for Asbestos Free Brake Pad. |
Olokode, O.S.; Fakolujo, S.O.; Aiyedun, P.O.; Jaji, Z.O.; Owoeye, F.T.; Anyanwu, B.U. |
Report |
Dec 31, 2012 |
1806 |
| Tire and pavement wear interaction monitoring for road performance indicators/Rehvide ja teekatte kulumise jalgimine teehoiu tulemusnaitajate susteemis. |
Kaare, Kati Korbe; Kuhi, Kristjan; Koppel, Ott |
Report |
Dec 1, 2012 |
4008 |
| Experimental investigation of electrode wear and rapidly re-solidified layer thickness in T90Mn2W50Cr45/T90Mn2W50Cr45 elektrodo dilimo ir greitai kietejancio sluoksnio eksperimentinis tyrimas. |
Rajendran, S.; Marimuthu, K. |
Report |
Nov 1, 2012 |
4042 |
| Wear performance of PVD coated tool steels/Ohukeste PVD-pinnetega tugevdatud tooriistateraste kulumiskindlus. |
Tshinjan, Aleksei; Klaasen, Heinrich; Kubarsepp, Jakob; Adoberg, Eron; Sergejev, Fjodor; Talkop, Ado |
Report |
Sep 1, 2012 |
2186 |
| A study of third body behaviour under dry sliding conditions. Comparison of nanoscale modelling with experiment/Kolmanda keha kaitumine kuivhoordetingimustes. Nanoskaalas modelleerimise vordlus eksperimendiga. |
Dmitriev, Andrey I.; Osterle, Werner; Kloss, Heinz; Orts-Gil, Guillermo |
Report |
Sep 1, 2012 |
2737 |
| Flank wear modeling of a tungsten carbide tip using the GMDH method in turning operation/Volframo karbido ploksteles uzpakalinio pavirsiaus issidevejimo tekinant modeliavimas grupinio duomenu apdorojimo metodu. |
Ali, D. Kara; Ghernaout, M.E.A.; Galiz, S.; Liazid, A. |
Report |
Sep 1, 2012 |
5014 |
| Influence of the tempering temperature and laser beam on hardness and wear of the overlay welded layers/Atleidimo temperaturos bei lazerio spinduliuotes itaka aplydyto sluoksnio kietumui ir dilumui. |
Ambroza, P.; Pupelis, E.; Pilkaite, T. |
Report |
Nov 1, 2011 |
2699 |
| The use of laser interferometer to study the texture and wear of a preserved blades material/Lazerinio interferometro panaudojimas menciu dangos medziagos strukturai ir issidevejimui tirti. |
Djeffal, A.; Bounazef, M.; bedia, E.A. Adda |
Report |
Jul 1, 2011 |
4106 |
| Wear fretting behavior of thick HA anodizing alumina layer/Anodinimu apdorotu storu aliuminio sluoksniu fretinginio dilimo pobudis. |
Raid, A.; Boualem, N.; Fridrici, V.; Kapsa, Ph. |
Report |
Jul 1, 2011 |
2404 |
| Wear resistant layers obtained by using materials powder for overlay welding structural steel/Dilimui atsparus sluoksniai gauti konstrukcinio plieno apvirinimui naudojant medziagu miltelius. |
Ambroza, P.; Kavaliauskiene, L. |
Report |
Mar 1, 2011 |
3423 |
| Characterization of various coatings in terms of friction and wear for internal combustion engine piston rings/Ivairiomis dangomis padengtu vidaus degimo varikliu stumokliu ziedu trinties ir isdilimo tyrimas. |
Guermat, A.; Monteil, G.; Bouchetara, M. |
Report |
Mar 1, 2011 |
4515 |
| The kinematic and dynamic performances of the loading mechanism of the hip joint wear simulator. |
Pakhaliuk, Volodymyr Ivanovich; Poliakov, Aleksandr Mykhaylovich; Desyatov, Ivan Borisovich; Kalinin |
Report |
Jan 1, 2011 |
1509 |
| Properties of composite wear resistant layers created by laser beam. |
Kovarikova, Ingrid; Simekova, Beata; Hodulova, Erika; Ulrich, Koloman |
Report |
Jan 1, 2011 |
1122 |
| Wear, friction and temperature monitoring of polyphenylene sulphide composites under dry sliding regime. |
Besnea, Maria Aida Cristina; Trufasu, Dan Catalin; Andrei, Gabriel; Deleanu, Lorena |
Report |
Jan 1, 2011 |
1423 |
| Effect of oxidation on abrasive wear behaviour of titanium carbide based composites in silica medium/Oksudeerimise moju titaankarbiidkermiste kulumisintensiivsusele liivakeskkonnas. |
Antonov, Maksim; Hussainova, Irina; Pirso, Juri; Juhani, Kristjan; Viljus, Mart |
Report |
Dec 1, 2010 |
2821 |
| Wear characteristics of multilayer-coated cutting tools when milling particleboard. |
Darmawan, Wayan; Usuki, Hiroshi; Rahayu, Istie S.; Gottlober, Christian; Marchal, Remy |
|
Nov 1, 2010 |
3661 |
| The research of biology coupling characteristics on the shells of Haliotis discus hannai Ino. |
Li, Xiu-juan; Liang, Yun-hong; Tian, Xi-mei; Ren, Lu-quan; Lu, Guang-lin |
Report |
Oct 19, 2010 |
2431 |
| Abrasive wear of geometrical surface structures of Scapharca subcrenata and Burnt-end Ark against soil. |
Zhang, Rui; Lu, Zhi-li; Li, Jian-qiao |
Report |
Oct 14, 2010 |
1489 |
| Wear properties of 3-aminopropyltriethoxysilane-functionalized Carbon nanotubes reinforced ultra high molecular weight polyethylene nanocomposites. |
Lee, Ji-Hoon; Kathi, John; Rhee, Kyong Yop; Lee, Joong Hee |
Report |
Jul 1, 2010 |
2928 |
| Investigation of wear resistance of high velocity oxy-fuel sprayed WC-Co and [Cr.sub.3][C.sub.2]-NiCr coatings/ Greituoju liepsniniu purskimu suformuotu WC-Co ir [Cr.sub.3][C.sub.2]-NiCr dangu atsparumo dilimui tyrimas. |
Zdravecka, E.; Suchanek, J.; Tkacova, J.; Trpcevska, J.; Brinkiene, K. |
Report |
Jul 1, 2010 |
2530 |
| Enhanced wear performance of nylon 6/organoclay nanocomposite by blending with a thermotropic liquid crystalline polymer. |
Zhang, Baoqing; Wong, Julia Shuk-Ping; Yam, Richard Ching-Man; Li, Robert Kwok-Yiu |
Report |
May 1, 2010 |
6662 |
| Effect of lubricant contamination on friction and wear in an EHL sliding contact/Tepalo uzterstumo itaka trinciai ir issidevejimui ehl slydimo kontakte. |
Sari, M.R.; Ville, F.; Haiahem, A.; Flamand, L. |
Report |
Mar 1, 2010 |
2992 |
| Influence of phase morphology on the sliding wear of polyethylene blends filled with carbon nanofibers. |
Wood, Weston; Li, Bin; Zhong, Wei-Hong |
Report |
Mar 1, 2010 |
6209 |
| Application of non-parametric methods for monitoring of tool chipping. |
Mulc, Tihomir; Udiljak, Toma; Ciglar, Damir; Brezak, Danko; Staroveski, Tomislav |
Report |
Jan 1, 2010 |
1458 |
| Assessment of wear and tribological behavior of spark plasma sintered Ti. |
Benga, Gabriel Constantin; Gingu, Oana; Ciupitu, Ion |
Report |
Jan 1, 2010 |
1247 |
| Increasing the wear resistance of superficial layers by laser alloying. |
Demian, Gabriela; Demian, Mihai |
Report |
Jan 1, 2010 |
951 |
| An electrode wear compensation model regarding the EDM process. |
Tirla, Andrei; Popa, Marcel Sabin; Pop, Grigore Marian; Chetreanu-Don, Camil Octav; Oltean, Andrei I |
Report |
Jan 1, 2010 |
1327 |
| A solution to improve quality products. |
Boca, Gratiela Dana; Daraba, Dinu |
Report |
Jan 1, 2010 |
1452 |
| Experimental study concerning the behaviour of black locust wood to wear test. |
Porojan, Mihaela; Salca, Emilia-Adela; Cismaru, Maria |
Report |
Jan 1, 2010 |
1488 |
| Wear process of tires. |
Cerny, Jakub; Kyas, Kamil; Krumal, Martin; Manas, David; Manas, Miroslav; Stanek, Michal |
Report |
Jan 1, 2010 |
1474 |
| Research on obtaining wear-resistant sintered parts from metal powders recovered. |
Radu, Stefan; Demian, Mihai; Didu, Anca; Demian, Gabriela |
Report |
Jan 1, 2010 |
694 |
| Estimation of tool wear of a gun drill using the signal curve pattern of feed force/Sautuvu grazto dilimo ivertinimas pagal pastumu jegos signalu kreive. |
Sihvo, I.; Varis, J. |
Report |
Jan 1, 2010 |
5031 |
| Wear resistance of laser remelted thermally sprayed coatings/Lasersulatatud termopinnete kulumiskindlus. |
Surzhenkov, Andrei; Kulu, Priit; Tarbe, Riho; Mikli, Valdek; Sarjas, Heikki; Latokartano, Jyrki |
Report |
Dec 1, 2009 |
2797 |
| High-temperature cyclic impact abrasion testing: wear behaviour of single and multiphase materials up to 750[degrees]C/Korgetemperatuurne tsuklilise iseloomuga abrasioonkulumine: uhe- ja mitmefaasiliste materjalide kulumine temperatuuridel kuni 750[degrees]C. |
Badisch, Ewald; Winkelmann, Horst; Franek, Friedrich |
Report |
Dec 1, 2009 |
2111 |
| Tribological behavior of polyamide 66-based binary and ternary composites. |
Hu, Haixia; Yu, Sirong; Wang, Mingyu; Liu, Kaixin |
Report |
Dec 1, 2009 |
2468 |
| Tool wear in cutting of Metal Matrix Composites. |
Reddy, P. Ravinder; Krishna, A.A. Sri Rama |
Report |
Nov 1, 2009 |
4202 |
| Hydraulic machine wear control by working regime/Hidraulines masinos devejimosi valdymas darbo rezimu. |
Zdankus, N.; Kargaudas, V. |
Report |
Sep 1, 2009 |
3733 |
| Aging of polyethylene pipes transporting drinking water disinfected by chlorine dioxide. I. chemical aspects. |
Colin, X.; Audouin, L.; Verdu, J.; Rozental-Evesque, M.; Rabaud, B.; Martin, F.; Bourgine, F. |
Technical report |
Jul 1, 2009 |
5741 |
| Use of contour signatures and classification methods to optimize the tool life in metal machining/Kulumisjalje kontuuride kasutamise ja klassifitseerimise meetodid metallide loiketootlemisel pusivusaja optimeerimiseks. |
Alegre, Enrique; Alaiz-Rodriguez, Rocio; Barreiro, Joaquin; Ruiz, Jonatan |
Report |
Mar 1, 2009 |
2879 |
| A study on different activation functions for neural network-based wear loss prediction. |
Kumar, A. John Presin; Singh, D. Kingsly Jeba |
Report |
Mar 1, 2009 |
1910 |
| A novel semiautogenous mill liner wear kinetics model. |
Karamoozian, Mohammad; Shafaei, Seyed Ziaedin; Kakaie, Reza; Noaparast, Mohammad; Zeidabadi, Sedighe |
Report |
Jan 1, 2009 |
2191 |
| Tool wear behavior in turning processes using a worn cutting tool. |
Rico, L.; Noriega, S.; Aguirre, J.J.; Diaz, J.J.; Sanchez, J. |
Report |
Jan 1, 2009 |
4142 |
| Influence of dynamic elementary processor structure in the flank wear parameter filtration. |
Brezak, Danko; Majetic, Dubravko; Udiljak, Toma; Staroveski, Tomislav |
Report |
Jan 1, 2009 |
1367 |
| Mathematical models of flank wear curve during the turning of steel C60E4. |
Qehaja, Nexhat; Bunjaku, Avdyl; Kacani, Jorgaq; Salihu, Avdi; Zeqiri, Hakif; Osmani, Hysni |
Report |
Jan 1, 2009 |
1234 |
| Development of a housing for on-line-wear-analysis of clutch lining pads under dry friction on test benches. |
Albers, Albert; Kelemen, Simon |
Report |
Jan 1, 2009 |
1298 |
| 3D tool wear simulation for turning process. |
Patrascu, Gabriela; Carutasu, Nicoleta Luminita; Dragomirescu, Cristian George |
Report |
Jan 1, 2009 |
1143 |
| Flank wear in turning of hardened steel 42CrMo4. |
Zeqiri, Hakif; Salihu, Avdi; Bunjaku, Avdyl; Osmani, Hysni; Qehaja, Nexhat; Zeqiri, Fitim |
Report |
Jan 1, 2009 |
1795 |
| Correlation between cutting forces and tool wear when thread tapping AISI P20 hardened steel. |
Benga, Gabriel; Ciupitu, Ion; Stanimir, Alexandru |
Report |
Jan 1, 2009 |
1513 |
| Effect of particle velocity, temperature and impingent angle on the erosive wear behavior of polymer matrix composites. |
Kharde, Y.R.; Saisrinadh, K.V. |
Report |
Dec 1, 2008 |
4107 |
| Predicting wear from mechanical properties of thermoplastic polymers. |
Brostow, Witold; Lobland, Haley E. Hagg |
Technical report |
Oct 1, 2008 |
2231 |
| Wear of the fuel supply system of CFB boilers. |
Suik, H.; Pihu, T.; Molodtsov, A. |
Report |
Jun 1, 2008 |
2492 |
| Effects of thermal aging on isotactic polypropylene crystallinity. |
Law, Aaron; Simon, Leonardo; Lee-Sullivan, Pearl |
Technical report |
Apr 1, 2008 |
4004 |
| Local thermo-oxidative degradation in injection molding. |
Schmiederer, Dirk; Gardocki, Aleksander; Kuhnert, Ines; Schmachtenberg, Ernst |
Technical report |
Apr 1, 2008 |
3454 |
| Thermal degradation and physical aging of poly(lactic acid) and its blends with starch. |
Acioli-Moura, Ricardo; Sun, Xiuzhi Susan |
Technical report |
Apr 1, 2008 |
5649 |
| The friction and wear properties of clay filled PA66. |
Mu, Bo; Wang, Qihua; Wang, Tingmei; Wang, Honggang; Jian, Lingqi |
Technical report |
Jan 1, 2008 |
3626 |
| Wear of Poly (methyl methacrylate) against a metallic surface in dry conditions. |
Geringer, Jean; Forest, Bernard; Combrade, Pierre |
|
May 1, 2007 |
7250 |
| The quest for longevity: surface modification adds the final touch to myriad orthopedic products. |
Whitney, Jennifer |
|
May 1, 2007 |
2759 |
| Oil pump--accelerated wear: continental TSIO 520M. |
|
Brief article |
Jan 1, 2007 |
161 |
| Wear patterns of polycrystalline cubic boron nitride cutting tools when machining hardened bearing steel. |
Benga, Gabriel; Stanimir, Alexandru |
|
Jan 1, 2007 |
2088 |
| The wear evaluation of the cutting edge and the cutting speed in the drilling process of some manganese steels. |
Ghionea, Adrian; Vlase, Aurelian; Ghionea, Ionut |
Technical report |
Jan 1, 2007 |
1846 |
| Influence of nozzle wear on surface quality at abrasive waterjet cutting. |
Hloch, Sergej |
Technical report |
Jan 1, 2007 |
1247 |
| Testing of hard nano-crystalline coatings for cutting tools. |
Piska, Miroslav |
Technical report |
Jan 1, 2007 |
1453 |
| The effect of drying methods on sized yarn characteristics. |
Schwarz, Ivana; Flincec Grgac, Sandra; Kovacevic, Stana; Katovic, Drago; Bischof Vukusic, Sandra |
Technical report |
Jan 1, 2007 |
1657 |
| Temperature aging of the selected synthetic and mineral transformer insulation systems. |
Trnka, Pavel; Pihera, Josef; Prosr, Pavel; Polansky, Radek |
Technical report |
Jan 1, 2007 |
1247 |
| A tool wear sensor for circular saws using wavelet transform signal processing. |
Suetsugu, Yoshitaka; Ando, Keisuke; Hattori, Nobuaki; Kitayama, Shigeru |
|
Nov 1, 2005 |
3299 |
| Cutting performance and wear morphology in re-coated hob for dry machining. |
Casalino, G.; Campanelli, S.L.; Ludovico, A.D. |
Technical report |
Jan 1, 2005 |
1440 |
| Assessment of mining tremor influence on the technical wear of building. |
Wodynski, Aleksander; Lasocki, Stanislaw |
Report |
Apr 1, 2004 |
4945 |
| Wear studies of frequently used implant materials. |
Roychowdhury, Amit; Gupta, Sanjay; Vidyasagara, P.E.C.; Pal, Subrata |
|
Jan 1, 2004 |
1998 |
| Understanding bottom wear in coreless induction furnaces. |
Beaird, Jerry |
|
Jul 1, 2003 |
2112 |
| Roger Replies. (Special Feature--Interview). |
|
|
Feb 1, 2003 |
1783 |
| Mechanical Resistance to Shear Stress: The Role of Echinoderm Egg Extracellular Layers. |
M. THOMAS, FLORENCE I.; EDWARDS, KRISTEN A.; BOLTON, TOBY F.; SEWELI, MARY A.; ZANDE, JILL M. |
|
Aug 1, 1999 |
2247 |
| Wear protection technology: some ways to combat abrasion, corrosion and other wear problems, and to monitor the effectiveness of wear technology. |
|
|
Nov 1, 1997 |
4772 |
| Selecting materials for wear resistance. |
Bolvari, Anne E.; Glenn, Sherry B. |
|
Dec 1, 1995 |
2690 |
| A polytetrafluoroethylene filled ultra-high molecular weight polyethylene composite: mechanical and wear property relationships. |
Silverstein, M.S.; Breitner, J. |
|
Nov 1, 1995 |
6026 |
| Extend part life with wear treatments. |
|
|
Nov 1, 1995 |
825 |
| Designing wear parts - carbide or ceramics? |
Shipley, Tom |
|
Jun 1, 1995 |
1040 |
| The relation of Schallamach pattern to rubber properties and wear conditions. |
Donavan, J.A. |
|
Nov 1, 1994 |
2752 |
| Nylon for the long haul. |
|
|
May 1, 1993 |
350 |
| Controlling refractory erosion in induction furnaces: the linkage between equipment, alloy system and slag environment affects refractory effectiveness. |
Stark, Ronald A. |
|
Aug 1, 1991 |
2506 |
| Wear tests for plastics processing. |
Mennig, G. |
|
May 1, 1991 |
2204 |
| Tool-wear insensitivity: why are nine out of ten machine-tool buyers ignoring this technology? |
Sprow, Euhene E. |
|
Oct 1, 1990 |
3722 |
| On-line monitoring of wear. |
Rosen, Jerome |
|
Oct 1, 1989 |
3305 |
