Printer Friendly

U.S. debut of medium-size two-platen series.

KraussMaffei Corp. (USA), Florence, Ky., recently announced the U.S. introduction of its newest press series, the GX line of two-platen machines from 400 to 650 tons. They were introduced in Germany last June (see July '12, Keeping up). The machines were introduced at an open house at Proper Group International in Warren, Mich., a moldmaker and molder whose plant also houses a KraussMaffei tech center.

Hydromechanical GX machines are recommended for their fast clamp movement, achieved with the new GearX locking unit, which has one compact hydraulic cylinder (electric optional) on each side of the clamp. It drives a coupling rod that simultaneously locks two clamp cylinders in under 0.25 sec.

Also new is the GuideX guide shoe that supports the moving platen and maintains parallelism. There's also the new MC6 controller with a 19-in. touchscreen and numerous features to make it faster and easier to use, including provision for operation while wearing gloves.

(859) 283-0200 *

COPYRIGHT 2013 Gardner Publications, Inc.
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2013 Gale, Cengage Learning. All rights reserved.

Article Details
Printer friendly Cite/link Email Feedback
Publication:Plastics Technology
Date:Mar 1, 2013
Previous Article:How to select a plastics assembly process.
Next Article:New cast film & sheet lines.

Terms of use | Privacy policy | Copyright © 2019 Farlex, Inc. | Feedback | For webmasters