Printer Friendly

Two-Year Follow-up on Laparoscopic Three-Dimensional Printed Extravascular Stent Placement for Posterior Nutcracker Syndrome.

Byline: Yi-Tong. Guo, He. Wang, Jiang-Ping. Wang, Bo. Zhang

To the Editor: Posterior nutcracker syndrome (PNS) is a condition caused by compression of the left renal vein (LRV) between the vertebral column and the aorta (AO). Open surgery with LRV transposition has usually been recommended for patients with PNS.[1],[2],[3],[4] However, existing surgical means of treatment are not sufficiently safe, effective, or minimally invasive. Here, we present one case of PNS treated with three-dimensional (3D) printed extravascular stent placement using laparoscopy.

A 29-year-old woman with a 9-month history of severe and persistent gross hematuria was admitted to the Department of Urology in Tangdu Hospital. On admission, urinalysis was positive for microscopic hematuria (+++) and proteinuria (+). Anemia was demonstrated by the reduced hemoglobin (89 g/L). A preoperative Doppler ultrasound (DUS) examination confirmed a retroaortic LRV with flow acceleration in the stenotic area (peak velocity 8 m/s measured in the hilum portion and 220 cm/s in the stenotic area; [Figure 1]a). The preoperative computed tomography (CT) and 3D imaging showed compression and stricture of the retroaortic LRV (2-mm diameter measured in the stenotic area and 9 mm in the hilum portion; [Figure 1]b and [Figure 1]c). In addition, the 3D printed anatomical model gave us a perceptual intuition of the compressed retroaortic LRV [Figure 1]g.{Figure 1}

We designed the C-shaped personalized stent with the 3D modeling software Auto Computer Aided Design (Autodesk, San Rafael, CA, US) and printed it using a 3D printer (SLM-250S; EOS, Krailling, Bayern, Germany). The extravascular stent weighed 3.1 g. It had a length of 17 mm and a vertical and a transverse diameter within the stent of 9 mm and 6 mm, respectively [Figure 1]h. The following designs were targeted to prevent stent migration: (1) the raised edges on two ends of the extravascular stent, (2) the small holes on both ends of the raised edge to fix the stent on the AO with silk thread, and (3) the porosity of the extravascular stent.

A standard, four-port, transperitoneal, laparoscopic approach was performed under general anesthesia with the patient placed in the lateral oblique position. The left adrenal central vein, ovarian vein, and lumbar vein were ligated and transected to release the LRV [Figure 1]i. The LRV and AO were successively exposed [Figure 1]j. The AO and the proximal end of the lumbar artery were gently pulled, while the C-shaped extravascular stent was placed around the compressed LRV through the gap [Figure 1]k. The stent was pushed into the space around the compressed LRV [Figure 1]l. Finally, through the small holes on the raised edge, the extravascular stent was fixed on the AO.

The duration of the operation was 140 min and the blood loss was 50 ml. The gross hematuria disappeared on the 23rd postoperative day. Repeat DUS and CT examinations were performed at 6, 12, and 24 months postoperatively, and the results revealed patent blood flow of the LRV (peak velocity 16 cm/s, 18 cm/s, and 18.5 cm/s, respectively, measured in the hilum portion, peak velocity within the stent was not measured as the effect of stent on ultrasound; [Figure 1]d) and stable position of the extravascular stent with no migration or erosion [Figure 1]e and [Figure 1]f. The reduced hemoglobin rose to 127 g/L at 12 months and 127.3 g/L at 24 months postoperatively.

There have been reports of patients with PNS who underwent open surgery, including LRV transposition,[1],[2] left renal autotransplantation,[2] left ovarian vein transposition,[3] and abdominal aortic transposition.[4] These vascular transposition methods are associated with technically difficult procedures and severe trauma. In addition, endovascular stents (EVS) have been proven to be an alternative treatment for PNS recently.[5] However, risks including incorrect stent placement, stent migration (e.g., to the right atrium), partial stent dislodgement to the inferior vena cava, and stent migration into the hilar region of the LRV cannot be avoided effectively.[6],[7] Beyond this, patients treated with EVS have to take anticoagulants, which can increase the risk of postoperative complications.

The use of 3D printing technology and medicine in combination has solved a number of traditional medical problems. We built a vascular stent of appropriate size, designed with a series of anti-migration component design using 3D printing technology. Titanium alloy, the raw material used in the stent, was selected for its lightweight, pronounced compression strength, low cost, and biocompatibility. The extravascular stent was shown to be safe postoperatively without migration, collapse, or erosion. Since extravascular stent implantation was here relatively simple, the operation was easily completed using laparoscopic technology, making it a less invasive alternative to LRV transposition and open surgery.

In conclusion, a patient-specific 3D printed extravascular stent was made for the treatment of PNS, and the laparoscopic implantation of the stent was conducted successfully. Hence, 3D printed extravascular stents with titanium alloy might be a minimally invasive, safe, and effective technique for PNS.

Declaration of patient consent

The authors certify that they have obtained all appropriate patient consent forms. In the form, the patient has given her consent for her images and other clinical information to be reported in the journal. The patient understands that her name and initial will not be published and due efforts will be made to conceal her identity, but anonymity cannot be guaranteed.

Financial support and sponsorship


Conflicts of interest

There are no conflicts of interest.


1. Marone EM, Psacharopulo D, Kahlberg A, Coppi G, Chiesa R. Surgical treatment of posterior nutcracker syndrome. J Vasc Surg 2011;54:844-7. doi: 10.1016/j.jvs.2011.01.038.

2. Ali-El-Dein B, Osman Y, Shehab El-Din AB, El-Diasty T, Mansour O, Ghoneim MA, et al. Anterior and posterior nutcracker syndrome: A report on 11 cases. Transplant Proc 2003;35:851-3. doi: 10.1016/S1569-9056(03)80038-6.

3. Hartung O, Barthelemy P, Berdah SV, Alimi YS. Laparoscopy-assisted left ovarian vein transposition to treat one case of posterior nutcracker syndrome. Ann Vasc Surg 2009;23:413.e13-6. doi: 10.1016/j.avsg.2008.08.026.

4. Li X, Ji C, Guo H. Abdominal aortic transposition as a treatment alternative for posterior nutcracker syndrome. Int J Urol 2012;19:1043-4. doi: 10.1111/j.1442-2042.2012.03092.x.

5. Chen S, Zhang H, Shi H, Tian L, Jin W, Li M, et al. Endovascular stenting for treatment of nutcracker syndrome: Report of 61 cases with long-term followup. J Urol 2011;186:570-5. doi: 10.1016/j.juro.2011.03.135.

6. Sebastian T, Erdoes G, Bratu VA, Baumgartner I, Kucher N. Endovascular extraction of a migrated large self-expanding laser-cut renal venous stent from the right ventricle. J Vasc Surg Cases Innov Tech 2017;3:79-82. doi: 10.1016/j.jvscit.2017.03.001.

7. Wu Z, Zheng X, He Y, Fang X, Li D, Tian L, et al. Stent migration after endovascular stenting in patients with nutcracker syndrome. J Vasc Surg Venous Lymphat Disord 2016;4:193-9. doi: 10.1016/j.jvsv.2015.10.005.
COPYRIGHT 2018 Medknow Publications and Media Pvt. Ltd.
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2018 Gale, Cengage Learning. All rights reserved.

Article Details
Printer friendly Cite/link Email Feedback
Title Annotation:Correspondence
Author:Guo, Yi-Tong; Wang, He; Wang, Jiang-Ping; Zhang, Bo
Publication:Chinese Medical Journal
Article Type:Letter to the editor
Date:Dec 5, 2018
Previous Article:Provocation Test-Confirmed Chlorhexidine-Induced Anaphylaxis in Dental Procedure.
Next Article:A Case of Primary Seminal Vesicle Cystadenoma.

Terms of use | Privacy policy | Copyright © 2019 Farlex, Inc. | Feedback | For webmasters