Printer Friendly

The way out of mature markets: coatings and adhesives companies must think outside the box to prevent stagnating in the mature stage of the business life cycle. The first of a two-part series.

Whether we like it or not, most of the coatings and adhesives markets we serve as suppliers, formulators, equipment producers and consultants happen to be in the mature stage of the product life cycle (see chart below).

Chemark estimates this stage to comprise 83% of the North American and European coatings industry combined, representing approximately $37.4 billion of the regions total market value of $45 billion. A total of $37 billion worth of mature business is a large sum at risk.

We use the term "at risk" purposely but advisedly. Purposely because a mature stage is, in fact, a difficult stage to manage well, but advisedly, because it can be managed well provided it first is recognized for what it is and secondly, if you are creative.

What is a mature market? A mature market, as compared to the introduction and growth stages of development, is one where growth slows and hovers around GDP. In addition, margins are stabilized, but lower than the growth stage, competition increases, over-capacity is present, the rate of value chain consolidation increases appreciably and price becomes the predominate marketing tool. All these elements cause fear and concern about the future and if we find ourselves in this mature stage, we may not know what to do about it.

One method for moving back from the mature stage to the more profitable emerging/growth stage is to design something entirely new to the industry or, at worst, create a major improvement in an existing business model, product, channel-to-market or package.

DESIGN, OR RE-DESIGN, IS WHERE IT'S AT

Design success equates to repositioning oneself in the more profitable portions of the life cycle. Unfortunately, very few new designs come out of our industry directly. A notable exception would be the development of an intandem, two-coat electrocoat system, displacing sprayable primer surfacers with the second E-coat tank in an auto assembly line.

Design innovations can come from many and varied environmental roots. They can be methodical and highly disciplined; creative, which denotes genius; reactive, denoting knee-jerk spontaneity; or proactive, which leads the curve in disciplined thought process.

Throughout history, there can be found successful design personalities to fit each type. To name a few, Albert Einstein, Thoms Edison, Alexander Graham Bell, Harvey Firestone, Henry Ford, and Jack Welch. From a pure design perspective, you may question those we've chosen to include in this list. However, once we have placed these personalities into their proper design personality type positions, it should be clear.

While it is acknowledged that Einstein, Bell and Edison were brilliant inventors, they first had to be designers in their minds. They had to envision possible end results in order to create something that did not exist before.

When we think of Firestone's tires and Ford's automobiles they must be categorized as users of inventions that had been developed before. They adapted and applied design disciplines in creating their own product.

Welch, Donald Trump and J. Willard Marriott have re-designed businesses and management practices that did not exist before they influenced these elements.

So what is the takeaway from this thought process? What can we do to improve our position along the life cycle continuum? Can we do anything to save ourselves or do we sit idle and allow the "third oldest profession" to dwindle into profit oblivion?

The challenge that lay before all of us in this, the mature world of coatings and adhesives, is to bring new thoughts and disciplines to bear from outside sources. Places such as colleges and universities as well as other industries. We need to be bold, try new things and not be afraid to take risks. After all, we're already "at risk" by standing still in the mature zone.

Tune in next month for part two of this discussion in which I will discuss other aspects of creative design.

PHIL PHILLIPS

CONTRIBUTING EDITOR

PHILLIPS@CHEMARKCONSULTING.NET
COPYRIGHT 2006 Rodman Publishing
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2006 Gale, Cengage Learning. All rights reserved.

Article Details
Printer friendly Cite/link Email Feedback
Title Annotation:market research
Author:Phillips, Phil
Publication:Coatings World
Geographic Code:1USA
Date:Jun 1, 2006
Words:648
Previous Article:Smart coatings are in the spotlight: smart coatings are receiving a lot of attention for their ability to increase the functionality of paint and...
Next Article:Industrial coatings: intense competition combined with raw material price increases and overseas competition is forcing industrial coatings...
Topics:


Related Articles
Radcure coatings: UV and EB coatings technology continues to impact many industries, delivering environmental and performance benefits to a variety...
Index to articles.
Rad-cure coatings market: the advantages of UV/EB coatings technology offer coatings manufacturers and raw material suppliers tremendous...
Analyzing mature and saturated markets: does industry really understand that a mature market normally does not mean it is also saturated?
Industrial coatings market: fueled by an international construction boom and opportunities to capitalize on the shift to water-based systems,...
New technology adoption: Part II: do the paint, coatings, adhesives and sealants industries fall into the Adoption Life Cycle? The second of a...
Coatings, adhesives and sealants synergies: companies are looking to boost sales by taking advantage of synergies between coatings, adhesives and...
Automotive OEM coatings market: while the automotive OEM market is level to slightly declining in the mature markets of North America and Western...
Use of organofunctional silanes for improving water-resistance of acrylic wood coatings.

Terms of use | Privacy policy | Copyright © 2021 Farlex, Inc. | Feedback | For webmasters