Printer Friendly

The view from Visteon's European ops.

Visteon ( is currently going through a fairly uncomfortable time in North America, and is causing, for some, quite a bit of heartache and distress. In Europe, though, where it is not hindered with the same problems, things look far more upbeat. This year, for example, the European and South African operations, which for some accounting reason are grouped together, will account for 43% of Visteon's turnover, thereby overtaking North America, which will see its share drop from 63% to 39%, albeit on a much reduced figure, down $7 billion from last year's $18.8 billion to a projected $11.4 billion in 2005.


Asked whether the rationalization process in the industry, including Visteon, has come to an end or whether there will be another period of change coming up, Dr. Heinz Pfannschmidt, Visteon executive vice president and president of Europe and South Africa, replies: "If we do it in the traditional way, just pressuring on pricing and squeezing the supply base, it doesn't work out anymore. So there is certainly some limitation, otherwise the lemon will be very dry, but amazingly enough, if we do it in a more intelligent way, there are always means for efficiency improvements and rationalization. Some of that is associated with what we are doing here in Kerpen, Germany, with the test facility, our new wind tunnel and the associated computer simulation. We gather a great deal of information from testing in the wind tunnel that we can use to refine the simulation models. You can save plenty of money and have a very stable concept, deleting the trail and error stages, if you have very intelligent simulation tools in the very early stages of engineering when the concept is being conceived.

"Another hobbyhorse I have is re-use and carryover," continues Pfannschmidt. "Why is it that Toyota, which is making plenty of money, has carryover rates of over 60% and some European carmakers have carryover rates of less than 20%, or between 20-30%? The answer is very simple. There's a great deal of discipline in Toyota's engineering process. If they have a proven solution, they just take it over between platforms and also within platforms from generation to generation. The whole engineering mentality is about taking generic solutions and putting them together."

Another element is taking waste out of all interfaces in the very broad sense says Pfannschmidt. "It could be the interface between us and the carmaker. For example, if you work on a joint CAE/CFD-based digital mock-up model, you can eliminate a great deal of waste." It even comes down to mundane items like screws and brackets, says Pfannschmidt. "If you look into the design of a car, it's still mind-boggling to me how complex the process is and how assembling some of the parts just isn't thought through. It might be different bolts or brackets or maybe engine variants where all the tubes are changed. Taking waste out of these kinds of value chains has a real savings potential. It is what I mean by taking intelligent waste out and further improving the efficiency where there is still some room for improvement."

Turning to more strategic matters, Pfannschmidt is very upbeat about prospects in eastern and central Europe. Russia, for example, already accounts for the giant's share with around a million vehicles a year, but with Turkey included, the region accounts for around 1.5-million cars annually. "This will grow to 2.5 million by the end of this decade and to around four million in 2015," forecasts Pfannschmidt. "Turkey will also play a major role because there is a big labor force and there are cost advantages. It will account for around a million of this four million in 10 years' time, while some countries like Rumania and possibly Poland are also likely to play a role as well."

The real high growth area, though, is China and although it does not come under Pfannschmidt's remit, he takes a great deal of interest in what is happening there and believes that the country is set for some dramatic changes in the next couple of years. However, warning signs are coming through that the market is now flattening out a bit after its steep growth phase which could lead to an over-capacity situation. "I think it is fascinating to see what is happening there," says Pfannschmidt. "They could either go for very aggressive export using their capacity, or the market might even consolidate or collapse a little bit. I know that many of my colleagues are speculating about what is going to happen, but I don't honestly know."

Pfannschmidt sees the Korean automotive industry as a template for the Chinese. "I use South Korea as an example of what is happening because I think the Chinese are currently in the middle of that process. In the beginning the Koreans had a very aggressive plan. They had Daewoo, Hyundai, Kia and SsangYong while even Samsung decided to go into auto making. They all thought they would have a bright future with the government forecasting that between them they would be building two and a half million cars a year in the country, largely for export." However, as Pfannschmidt points out, it all started to unravel with the economic crisis towards the end of the last decade having a devastating effect on Korean industry.

"Daewoo had after a couple of very successful years but then suffered a downturn with cash running out and the company almost broken before it was picked up by General Motors. Kia was also in financial trouble and ended up being taken over by Hyundai. Samsung decided to concentrate on electronics and sold its auto making business to Nissan while SsangYong was sold to Shanghai Automotive. The only survivor as an independent Korean carmaker is Hyundai-Kia. What they are doing now after that consolidation phase is moving out of Korea in their plan to conquer the world. This means that their investment program is now largely outside the country and so they are building transplants in North America, the Slovak Republic in Europe and Turkey. I am certain they will conquer both the American and European markets through these transplants.

"If we look at China we find that its industry is still fragmented with too many small players, so my personal belief is that the Chinese industry still has to go through a consolidation process which is why I give Korea as an example. One or two national champions will consequently emerge which will have to go into the other markets of the world. In Europe, for example, it would seem that they will target eastern Europe as it is still growing and looking for cost-competitive cars before coming to western Europe." He then points out that a factor in this evolution is that with local people employed in transplants, the benefits of low cost manufacturing no longer come into play. "In the case of the Koreans," says Pfannschmidt, "they are no longer employing Koreans but local people, so the benefits of low cost manufacturing are no longer there."

Asked about what impact this has on a company like Visteon, Pfannschmidt replies: "A practical example of our strategy can be seen by what we are doing in the Slovak Republic. We were already investigating build a plant in the country to service the Toyota/PSA Peugeot Citroen factory and had undertaken some site surveys before Hyundai-Kia made its announcement. We didn't want to be in two or three places and so decided on Nitra, a location midway between the Toyota/PSA plant and the site for the new Kia factory." This plant is designed to become an important base for the production of plastics components for interior and climate control products to supply car manufacturers located in eastern Europe. However, we had some convincing to do with the Koreans because they wanted to have us sitting on their campus. We had to explain to them that we would lose the economies of scale if we did this so they ultimately agreed to being supplied by a central plant that serviced them, PSA/Toyota and a Volkswagen plant in Bratislava."

However, in mid-August, Visteon announced that it was building another plant in the country, this time with its Korean affiliate Halla Climate Control, to supply climate control systems exclusively to Kia. "This new business award for Kia Motors is testimony of Visteon's growing relationship with Hyundai-Kia Automotive Group, Visteon's second largest customer worldwide," says Pfannschmidt. "This facility will exclusively focus on supplying the Kia program. We are tailoring our manufacturing, quality and supply chain processes around the individual requirements of our OEM customers. Our customer focus is the reason we call our just-in-time plants focused factories."

By William Kimberley, Editor

Automotive Engineer, London,
COPYRIGHT 2005 Gardner Publications, Inc.
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2005, Gale Group. All rights reserved. Gale Group is a Thomson Corporation Company.

Article Details
Printer friendly Cite/link Email Feedback
Title Annotation:Euro AUTO
Author:Kimberley, William
Publication:Automotive Design & Production
Article Type:Editorial
Geographic Code:1USA
Date:Oct 1, 2005
Previous Article:Toward the autonomous car.
Next Article:Globalization: myths, speculations & what you need to think about.

Related Articles
Countdown to euro.
What euro dividend?
Euro Blues?
Postcards from Portugal. (Produce).
Do currency fluctuations impact earnings? The recent rise in the value of the euro against the U.S. dollar could affect European producers, but it is...
2003 Roy W. Tess Award.
Visteon goes it alone: Visteon may invest, but Ford will sell restructured parts plants.
G7 reflections: one of the Plaza Accord's behind-the-scenes players offers his insights.

Terms of use | Privacy policy | Copyright © 2019 Farlex, Inc. | Feedback | For webmasters