Printer Friendly

Testing\Instrumentation.

Waveform Generator

The Model 2414B Arbitrary Waveform Generator has 12-bit resolution and operates at 20 MS/s for applications requiring fine timing resolution including the testing of production pagers, laser beam control, MEMS driver systems, and for providing communications' modulation signals and sonar waveforms. At 128k words of active waveform memory, the system can store up to 1,000 waveforms, and correlated with each waveform are 4 independent single-bit data streams.

Pragmatic Instruments, Inc., 7313 Carroll Rd., San Diego, CA 92121. 858-271-6770

Write In 117 or Reply Online

Laser Beam Analyzer

The stand-alone Beam Alyzer[TM] measures the width, ellipticity, profile, position, output power, and optical noise of cw laser beams. The results are displayed in real time on large LED indicators or on a user-supplied VGA monitor. Data can also be accumulated, logged, and stored for later analysis. The device uses multiple scanning knife-edges to scan up to seven independent axes with resolution of one micrometer.

Melles Griot, 16542 Millikan Ave., Irvine, CA 92606. 800-835-2626

Write In 118 or Reply Online

Measurement Devices

When used together, the 1750 LCR Digibridge[R] and the 1320 DC Bias Current Source offer a fully automated testing solution for DC bias current inductance measurements of high power inductors. These units provide unequaled price/performance and offer a range of user programmable features and measurement flexibility making them ideal for applications in product development, incoming inspection, or production line testing.

QuadTech, Inc., 100 Nickerson Rd., Marlborough, MA 01752. 508-485-3500

Write In 119 or Reply Online

Leak Testing Equipment

A compact, electronic "pressure-decay" type leak-testing instrument for manufacturers of medical devices and packages--the M-1045 Medical Tester-offers a low-cost, dry-air alternative for accurate, automatic, 100% testing at production-line speeds. The instrument is designed to provide quality-assurance and SPC data for such products as diagnostic and analytical equipment, filters, surgical and interventional devices, anesthetic and IV systems.

InterTech Development Company, 7401 N. Linder Ave., Skokie, IL 60077. 847-679-3377

Write In 120 or Reply Online

Force Gauge

The Chatillon Turbogauge digital force gauge has a powerful CPU with a 128k flash memory into an easy-to-use hand-held instrument that collects data at rates up to 10,000 samples per second. The Turbogauge also features programmable test parameters, user-selectable sampling rates, and ability to store as many as 1,000 test readings in as many as 99 different user-defined batches.

AmetekTest & Calibration Instruments, 8600 Somerset Dr., Largo, FL 33773. 800-527-9999

Write In 121 or Reply Online

Air Leak Tester

Users of the Model Q6000 Air Leak Tester will be able to make full use of multichannel synchronous and asynchronous testing. The benefit of the latter being that operators do not have to wait for one another to load and connect all the test pieces before the leak test can be started. Up to four intelligent detector modules can be connected to the control unit for remote programming with up to ten programs each.

ITI Qualitek, 267 Boston Rd., N. Billerica, MA 01862. 978-670-1113

Write In 122 or Reply Online

Hipot Tester

Model 3570D is an AC/DC Hipot with a built in Insulation Resistance testing function. This provides 3-in-1 functionality in a mid-range instrument covering the three most common safety tests, AC Hipot, DC Hipot, and Insulation Resistance. The IR range of the Model 3570D features 0-1000 volts DC, and a measuring range of 1 megohm to 1 gigohm. Tests may be sequenced using set-up memories to include AC Hipot, DC Hipot, and IR individually or in any combination so tests may run automatically.

Associated Research, Inc., 13860 W. Laurel Dr., Lake Forest, IL 60045. 800-858-TEST

Write In 123 or Reply Online

Fatigue Tester

The DynaMight fatigue testing system is perfect for evaluating the durability of orthopaedic components, devices, and materials at forces less than 225 lbs. This powerful single column system revolutionizes the ability to evaluate small components such as medical devices, dental implants, and surgical tools for durability testing. DynaMight combines linear or torsion capability with the flexibility of performing tests in either a vertical or horizontal orientation.

Instron Corp., 100 Royall St., Canton, MA 02021. 781-575-5000

Write In 124 or Reply Online

Portable Radiometer

The IL1470 Germicidal Radiometer provides an effective method for testing the dose intensity of germicidal and bacterial UV lamps and is designed for use by non-technical personnel. Featuring a detector which automatically programs the instrument, this hand-held radiometer is self-prompting with simple push-button operation and provides direct readouts on an LCD display.

International Light, Inc., 17 Graf Rd., Newburyport, MA 01950. 978-465-5923

Write In 125 or Reply Online
COPYRIGHT 2000 Advantage Business Media
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2000 Gale, Cengage Learning. All rights reserved.

Article Details
Printer friendly Cite/link Email Feedback
Publication:Medical Design Technology
Geographic Code:1USA
Date:Sep 1, 2000
Words:755
Previous Article:Well Boss, I've Got Good News & Bad News.
Next Article:MARKETERS focus.
Topics:

Terms of use | Privacy policy | Copyright © 2019 Farlex, Inc. | Feedback | For webmasters