Printer Friendly



The Clay Reamer with Conical Teeth ranges in size from 6 inches to 60 inches in diameter. The shaft ranges from 2.75 inches to 6.75 inches in diameter. Fabricated from heat treated alloy steel for strength and durability, these Clay Reamers are available with a built-in 20K, 30K or 45K swivel or drawbar, pin or rear connection. The API REG box fronts will accept any API pin crossover needed to attach to your drill. Made for aggressive cutting, mixing and pumping in sticky clay while also, an excellent choice for shale and sandstone. Choose front and rear reamer couplings (adapters/crossovers, drawbars, direct connect swivels) from the company's online Reamer Coupling Selection Chart. Custom sizes and designs are also available on request. 609.859.3300,

COPYRIGHT 2015 Oildom Publishing Company of Texas, Inc.
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2015 Gale, Cengage Learning. All rights reserved.

Article Details
Printer friendly Cite/link Email Feedback
Publication:Underground Construction
Date:Sep 1, 2015
Previous Article:Railhead.
Next Article:Landfill gas grows as viable energy source: new piping materials, procedures enhance viability.

Terms of use | Privacy policy | Copyright © 2018 Farlex, Inc. | Feedback | For webmasters