Printer Friendly

TM wrong on mortar clamp.

HI, I'M A MORTAR CARRIER VEHICLE STRYKER.

MY TM--TM 9-2320-311-10-12--GIVES BAD INFO IN WP 0049 00 ON THE POSITION OF THE MORTAR WIPER SEAL BAND CLAMP.

THE TM SHOWS THE CLAMP POSITIONED WITH THE TIGHTENING SCREW AT THE 12 O'CLOCK POSITION.

TROUBLE WITH THAT POSITION IS THAT THE SCREW MAY HIT THE REPLENISHER AND DESTROY THE CLAMP IF THE MORTAR EXPERIENCES EXCESSIVE RECOIL.

THE SCREW SHOULD BE AT THE 6 O'CLOCK POSITION. CHECK ALL YOUR STRYKERS WITH MORTARS FOR THE POSITION OF THE CLAMP.

IF ANY HAVE THE TIGHTENING SCREW IN THE 12 O'CLOCK POSITION, LOOSEN THE SCREW AND REPOSITION THE CLAMP SO THE SCREW IS AT 6 O'CLOCK.

FOR MORE INFO, SEE TACOM SAFETY-OF-USE MESSAGE 05-043.
COPYRIGHT 2006 PS Magazine
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2006, Gale Group. All rights reserved. Gale Group is a Thomson Corporation Company.

Article Details
Printer friendly Cite/link Email Feedback
Title Annotation:M1129 MCV Stryker ...
Publication:PS, the Preventive Maintenance Monthly
Article Type:Cartoon
Date:Jan 1, 2006
Words:117
Previous Article:Save us from the truly frightful.
Next Article:Striking Stryker suggestions.
Topics:


Related Articles
Keep cargo in place.
Women & blood donation.
Laser bits.
Say 'so long' to plug problems.
On track: the prototypes of two tracked infantry fighting vehicle (IFV) designs were unveiled in 2005 to meet national requirements in Germany and...
Pocket artillery.
BII goes upscale.
Picking up bad vibrations?
Clamp position critical.
Friend or foe? CIPs can tell.

Terms of use | Privacy policy | Copyright © 2020 Farlex, Inc. | Feedback | For webmasters