TIA Robotic Tooling Solutions' Automated Weld Seam Removal System Promises Removal Rates Over 20 Times Faster Than Manual Grinding.
The TWS91 System available in the UK from Derby based TIA, comprises five major components; the Track, the Drive Carriage, the Weld Shaver, the Control Umbilical and the Control Console. The Drive Carriage moves the Weld Shaver along the Track, under the supervision and control of an operator using the Control Console. The Control Console is connected remotely through the Control Umbilical, keeping the operator at a safe distance from the shaving operation. The entire system is portable and can be moved to different locations for different jobs.
The Track attaches to the steel panel workpiece positioned in almost any orientation using eight rare earth magnets. Track sections are available in either Flex or High-Flex versions to accommodate panel curvature. With conformance to bend radii of up to 10 m being possible, fewer Track sections need be utilized. As the Drive Carriage travels along the Track it moves the Weld Shaver over the weld seam and also provides the compliant force to keep the Weld Shaver in contact with the workpiece. The Drive Carriage is driven by a gear reduced servo motor with closed loop feedback. This allows the user to easily control and monitor the desired feed rate.
The Weld Shaver is available in three versions, differentiated only by their cutting width. The version best suited to the width of weld seam to be removed - which can be up to 59 mm - can be installed on the Drive Carriage. The Weld Shaver uses a series of slotting cutters with standard carbide inserts driven by a high torque servo motor. Using a servo motor allows the cutting speed, which can exceed 36 m/hr, to be accurately set and monitored, and the cutting effort to be monitored.
The Control Console allows the user to completely control and monitor the weld removal process from a safe distance. It displays cutter speed, cutter effort, carriage speed (feed rate), carriage effort, applied pressure and retract pressure. It has controls for enabling the Drive Carriage and the Weld Shaver, and setting the cutter speed, carriage speed, and orientation. The Control Umbilical carries all air supply lines, control and power cables from the Drive Carriage to the Control Console, protected within a crush resistant, fire retardant outer tube.
The TWS91 System was developed in conjunction with a US Navy Metalworking Center project to eliminate or greatly reduce the amount of manual grinding done during construction of the Navy's next generation of warships. It is now being used in wind turbine, nuclear and aerospace as well as other marine applications. More information about the Weld Shaver and Pushcorp, Inc. is available on http://www.pushcorp.com/Products/tws91.htm.
TIA Robotic Tooling Solutions
+44(0) 1332 204850
|Printer friendly Cite/link Email Feedback|
|Publication:||PR.com (Press Releases)|
|Date:||Jun 17, 2010|
|Previous Article:||Rock Fall's Revolutionary Metatarsal Protective Footwear Set to Radically Improve Safety, Comfort and Image.|
|Next Article:||Makewell Helps Nigerian Family Find a Facility to Perform Rare Separation Surgery for Conjoined Twins.|