TELCO LAUNCHES EDGELINK OTM1000 OC-3 TERMINAL MULTIPLEXER.
EdgeLink OTM1000 is the first optical SONET edge solution that allows service providers to deliver traditional T1, T3 and Ethernet services over a SONET OC-3 fiber feed via virtual concatenation.
EdgeLink OTM1000 addresses the need for compact and efficient last-mile delivery of voice, data, and Ethernet services. It optically transports an OC-3 to locations where copper cannot reach or where voice and data service delivery needs exceed T1 or T3.
EdgeLink OTM1000 is ideal for connection to fiber spurs off a carrier's SONET backbone ADM or in point-to point applications for extension of T1, T3, and Ethernet from a CO or POP.
"Key differentiators for EdgeLink OTM1000 in the SONET terminal multiplexer market are its flexibility and efficiency," said Dave Boulos, vice president, product management, Telco Systems. "It has the ability to virtually concatenate (VC) two STS-1 payloads into a single payload that can carry a 100BaseT Ethernet (fast Ethernet) connection with a DS3 available for delivery or to be used with an M13 for T1 fan out. Other configurations include: 3 DS3s, 2 DS3s and 8 10BaseT Ethernet ports, or 2 DS3s and 12 DS1s. The VC scheme uses maximum efficiency as opposed to wasting bandwidth by mapping a 100BaseT Ethernet connection to a single OC-3 155 Mbps, which is typical with packet over SONET (PoS)."
"EdgeLink OTM1000 has a lot to offer service providers," said Boulos. "Beyond its flexibility, service providers now have a platform to deliver services while saving 75% on equipment costs and its compact footprint is 60% smaller then traditional SONET transport devices. EdgeLink OTM1000 is currently available."
About Telco Systems
Based in Foxboro, Massachusetts, Telco Systems combines over 25 years of experience in carrier solutions with a rapidly expanding portfolio of enterprise solutions.
Telco Systems provides solutions for 10/100 Mbps and Gigabit Ethernet over fiber, VDSL solutions for the MTU/MDU market, the broadest possible range of multi-layer IP platforms, and the company's EdgeLink family of integrated access, multi-service access and multi-service broadband transport products for seamless migration from circuit-based equipment to emerging packet and cell technologies.
Telco Systems is a wholly owned subsidiary of BATM Advanced Communications. BATM (London stock exchange ticker symbol: BVC) is a designer and supplier of IP packet-based systems, such as high-capacity, self-routing switches with extensive QoS.
Telco Systems can be found on the World Wide Web at http://www.telco.com.
BATM Advanced Communications can be found on the World Wide Web at http://www.batm.com.
For more information, call 781/551-0300.
|Printer friendly Cite/link Email Feedback|
|Date:||Feb 1, 2003|
|Previous Article:||OINK PROVIDES PROFESSIONALS W/ INTERNET MANAGEMENT TOOLS.|
|Next Article:||TOSHIBA UNVEILS NOTEBOOK PC WITH DUAL 802.11A/B CONNECTIVITY.|