| Title |
Author |
Type |
Date |
Words |
| Optimization of the Accelerated Degradation Test Plan for Electrical Connector Contact Pairs Based on a Nonlinear Wiener Process. |
Qian, Ping; Hong, Lei; Chen, Wenhua; Qian, Yongwang; Wang, Zhe; Yao, Huajun |
Report |
Jul 31, 2020 |
8080 |
| A Spline Finite Point Method for Nonlinear Bending Analysis of FG Plates in Thermal Environments Based on a Locking-free Thin/Thick Plate Theory. |
Mo, Tian-Jing; Huang, Jun; Li, Shuang-Bei; Wu, Hai |
Report |
Jul 31, 2020 |
11990 |
| Bending Analysis of Circular Thin Plates Resting on Elastic Foundations Using Two Modified Vlasov Models. |
Yue, Feng; Wang, Fusheng; Jia, Senqing; Wu, Ziyan; Wang, Zhen |
Report |
Jul 31, 2020 |
6153 |
| BEHAVIOUR OF HIGH-STRENGTH CONCRETE CIRCULAR COLUMNS CONFINED BY HIGH-STRENGTH SPIRALS UNDER CONCENTRIC COMPRESSION. |
Hou, Chongchi; Zheng, Wenzhong; Chang, Wei |
Report |
Jun 1, 2020 |
9774 |
| Dynamic Stress-Stiffening of Carbon Black-Filled Vulcanizates. |
Zhang, Yuanhong; Wang, Baojin; Zhang, Lin; Zhou, Hongbin |
Report |
Sep 1, 2019 |
5504 |
| Prediction Method for Overconsolidation Ratio of Marine Soft Soil Based on the Piezocone Penetration Tests. |
Fu, Yanbin; Zhang, Sizhan; Lv, Guiyang; Han, Kaihang |
Report |
Aug 31, 2019 |
6889 |
| Zoning Elastic Modulus Inversion for High Arch Dams Based on the PSOGSA-SVM Method. |
Chen, Bo; Fu, Xiao; Guo, Xuyuan; Gu, Chongshi; Shao, Chenfei; Qin, Xiangnan |
Report |
Aug 31, 2019 |
7583 |
| Study of Tensile Properties of Multiwalled Carbon Nanotube/Polyether Ether Ketone Polymer Composites at the Nanoscale. |
Hsu, Chun-Yen; Scrafford, Kathryn; Ni, Chaoying; Deng, Fei |
Report |
Jun 1, 2019 |
3731 |
| Settlement of Funing Natural Clays under 14-Year Embankment Loads: A Case Study. |
Wang, Heng; Zeng, Ling-Ling; Ding, Jian-Wen; Hong, Zhen-Shun |
Case study |
May 31, 2019 |
5696 |
| Early-Age Tensile Basic Creep Behavioral Characteristics of High-Strength Concrete Containing Admixtures. |
Ni, Tongyuan; Yang, Yang; Gu, Chunping; Liu, Jintao; Chen, Jin; Lou, Xiaotian |
Report |
May 31, 2019 |
5227 |
| Explicit Form of Exact Analytical Solution for Calculating Ground Displacement and Stress Induced by Shallow Tunneling and Its Application. |
Guo, Caixia; Han, Kaihang; Kong, Heng; Shi, Leilei |
Technical report |
Apr 30, 2019 |
4762 |
| Displacement Solution of Salt Cavern with Shear Dilatation Behavior Based on Hoek-Brown Strength Criterion. |
Zhang, Huabin; Zhang, Qingqing; Wang, Laigui |
Technical report |
Apr 30, 2019 |
7809 |
| Residual Strength and Damage Mechanisms of Laminated Carbon Fiber Reinforced Polymer under Thermal Environments and Laser Irradiations. |
Zhao, Weina; Huang, Yihui; Song, Hongwei; Huang, Chenguang |
Report |
Dec 1, 2018 |
5438 |
| Mathematics. |
|
|
Sep 22, 2018 |
1226 |
| On the Multi-Parameter Experimental Investigation of Curing Cycle for Glass Fabric/Epoxy Laminated Composites. |
Seretis, Georgios V.; Kouzilos, Georgios N.; Manolakos, Dimitrios E.; Provatidis, Christopher G. |
Report |
Sep 1, 2018 |
6401 |
| Investigation of Residual Stresses in Cold-Formed Steel Sections with Nonlinear Strain-Hardened Material Model. |
Chinnaraj, K.; Prasad, Mangalaramanan Sathya; Rao, C. Lakshmana; Ramasamy, Padmanaban |
Technical report |
Sep 1, 2018 |
4614 |
| Stabilising Potential of Sawdust Lignin-based Extracts in Compressed Lateritic Bricks. |
Fadele, O.A.; Ata, O. |
Report |
Mar 1, 2018 |
3315 |
| Metaheuristic-Based Machine Learning System for Prediction of Compressive Strength based on Concrete Mixture Properties and Early-Age Strength Test Results. |
Prayogo, D. |
Report |
Mar 1, 2018 |
5730 |
| Mechanical Property Analysis of rubber-like materials under Large Deformation in Uniaxial Tension, Biaxial Tension and Expansion of Cylindrical Membrane. |
Sang, Jianbing; Han, Qi; Zhang, Yi; Wang, Jingyuan; Li, Xiaolei |
Report |
Jan 1, 2018 |
2933 |
| Nonlinear Finite Element Analysis of the Limit State and Pressure of Dented X60 Steel Pipeline. |
Liu, Xiaoben; Zhang, Hong; Wang, Baodong; Xia, Mengying; Tang, Kai; Wu, Kai |
Report |
Nov 1, 2017 |
2966 |
| Reliability Index of HDPE Pipe Based on Fracture Toughness. |
Alimi, Latifa; Azzouz, Salaheddine; Chaoui, Kamel |
Report |
Nov 1, 2017 |
4153 |
| Promising curaua fiber-reinforced polyester composite for high-impact ballistic multilayered armor. |
Monteiro, Sergio Neves; de Oliveira Braga, Fabio; Lima, Edio Pereira; Louro, Luis Henrique Leme; Dre |
Report |
Sep 1, 2017 |
4782 |
| Dependence of bulk viscosity of polypropylene on strain, strain rate, and melt temperature. |
Chivapornthip, P.; Bohez, E.L.J. |
Report |
Aug 1, 2017 |
4420 |
| Effect of oscillatory shear field on the morphology and mechanical properties of [beta]-nucleated isotactic polypropylene. |
Luo, Xiehuai; Pan, Yuxi; Li, Yongchao; Gao, Xueqin; Lei, Jun; An, Fangzhen; Li, Zhongming; Shen, Kai |
Report |
Aug 1, 2017 |
5416 |
| AUTOMATION OF ARCHES CALCULATION. |
Orobey, V.F.; Daschenko, O.F.; Lymarenko, O.M. |
Report |
Jul 1, 2017 |
3113 |
| DEFORMATION-STRENGTH MODEL APPLICATION AT THE DETERMINING OF STRESS-STRAIN STATE OF REINFORCED CONCRETE STRUCTURES. |
Karpiuk, V.M.; Kostiuk, A.I.; Somina, Yu.A.; Danilenko, D.S. |
Report |
Jul 1, 2017 |
3041 |
| Prediction of the stress level and stress concentration in cellular beams with circular openings. |
Pritykin, A.I.; Lavrova, A.S. |
Report |
Jul 1, 2017 |
3835 |
| Thermomechanical and large deformation behaviors of antiplasticized epoxy resins: effect of material formulation and network architecture. |
Pandini, Stefano; Bignotti, Fabio; Baldi, Francesco; Sartore, Luciana; Consolati, Giovanni; Panzaras |
Report |
Jun 1, 2017 |
10688 |
| Fatigue crack propagation in triblock copolymer toughened epoxy nanocomposites. |
Klingler, Andreas; Wetzel, Bernd |
Report |
Jun 1, 2017 |
7223 |
| Investigation of stress-strain state of micro-corrugated cardboard components in the process of its laminating and manufacturing packaging. |
Havenko, Svitlana; Bernatsek, Volodymyr; Khadzhynova, Svitlana |
Report |
May 1, 2017 |
2883 |
| I-beam girders dimensioning with numerical modelling of local stresses in wheel-supporting flanges. |
Gaska, D.; Haniszewski, T.; Margielewicz, J. |
Report |
May 1, 2017 |
3474 |
| Quenching residual stresses in T-section 7050 aluminum alloy forging. |
Hai, Gong; Yunxin, Wu; Tao, Zhang; Yaoqiong, Liu; Chen, Li; Hao, Ji; Shouhua, Yi; Minghui, Cao; Feng |
Report |
May 1, 2017 |
4469 |
| Evaluation of early-age performance of reinforced concrete pile cap. |
Stemberk, Petr; Frantova, Michaela; Petrik, Martin |
Report |
May 1, 2017 |
3234 |
| Study on tensile strength, impact strength and analytical model for heat generation in friction vibration joining of polymeric nanocomposite joints. |
Jafrey, Daniel D. Panneerselvam, Kavan |
Report |
May 1, 2017 |
6850 |
| Mechanical properties, crystallization characteristics, and foaming behavior of polytetrafluoroethylene-reinforced poly(lactic acid) composites. |
Huang, An; Kharbas, Hrishikesh; Ellingham, Thomas; Mi, Haoyang; Turng, Lih-Sheng; Peng, Xiangfang |
Report |
May 1, 2017 |
6741 |
| IN SITU STRESS MEASUREMENT NEAR FAULTS AND INTERPRETATION BY MEANS OF DISCRETE ELEMENT MODELLING. |
Alejano, Leandro R.; Castro-Filgueira, Uxia; Ferrero, Anna Maria; Migliazza, Maria; Vagnon, Federico |
|
Apr 1, 2017 |
6121 |
| Statistical evolution of short fatigue crack growth rate for LZ50 axle steel. |
Yang, B.; Liao, Z.; Ma, B.Q.; Wu, Y.Y.; Xiao, S.N. |
Report |
Mar 1, 2017 |
5714 |
| Investigation of the probabilistic low cycle fatigue design curves at stress cycling. |
Bazaras, Z.; Cesnavicius, R.; Ilgakojyte-Bazariene, J.; Kersys, R. |
Report |
Mar 1, 2017 |
2771 |
| Development and Application of the Power Plant Real-Time Temperature and Stress Monitoring System. |
Duda, Piotr |
Report |
Jan 1, 2017 |
3233 |
| New Method to Measure Crack Extension in Nuclear Graphite Based on Digital Image Correlation. |
Lai, Shigang; Shi, Li; Fok, Alex; Li, Haiyan; Sun, Libin; Zhang, Zhengming |
Report |
Jan 1, 2017 |
4957 |
| Theoretical and Experimental Investigation of Characteristics of Single Fracture Stress-Seepage Coupling considering Microroughness. |
Di, Shengtong; Jia, Chao; Qiao, Weiguo; Yu, Weijiang; Li, Kang |
Report |
Jan 1, 2017 |
6414 |
| A Refined Higher-Order Hybrid Stress Quadrilateral Element for Free Vibration and Buckling Analyses of Reissner-Mindlin Plates. |
Li, Tan; Ma, Xu; Chen, Wanji; Jing, Xili |
Report |
Jan 1, 2017 |
15527 |
| Surface Crack Detection in Prestressed Concrete Cylinder Pipes Using BOTDA Strain Sensors. |
Xu, Zhigang; Feng, Xin; Zhong, Sheng; Wu, Wenjing |
Report |
Jan 1, 2017 |
4659 |
| Finite Analytic Method for One-Dimensional Nonlinear Consolidation under Time-Dependent Loading. |
Cheng, Dawei; Wang, Wenke; Chen, Xi; Zhang, Zaiyong |
Report |
Jan 1, 2017 |
6109 |
| Fatigue Properties of Plain Concrete under Triaxial Tension-Compression-Compression Cyclic Loading. |
Zhao, Dongfu; Gao, Haijing; Liu, Huixuan; Jia, Penghe; Yang, Jianhui |
Report |
Jan 1, 2017 |
5609 |
| Flexural Behavior of High-Volume Steel Fiber Cementitious Composite Externally Reinforced with Basalt FRP Sheet. |
Kim, Seungwon; Park, Cheolwoo |
Report |
Jan 1, 2017 |
4652 |
| Seismic Performance of Steel Frames with Semirigid Connections. |
Faridmehr, Iman; Tahir, Mahmood Md.; Lahmer, Tom; Osman, Mohd Hanim |
Report |
Jan 1, 2017 |
4714 |
| Bending and Shear Experimental Tests and Numerical Analysis of Composite Slabs Made Up of Lightweight Concrete. |
Rabanal, F.P. Alvarez; Guerrero-Munoz, J.; Alonso-Martinez, M.; Martinez- Martinez, J.E. |
Report |
Jan 1, 2017 |
5065 |
| Fatigue Life Assessment of Orthotropic Steel Deck with UHPC Pavement. |
Jiang, Xu; Yuan, Yuan; Wu, Chong; Luo, Chengwei |
Report |
Jan 1, 2017 |
4743 |
| Autotuning of Isotropic Hardening Constitutive Models on Real Steel Buckling Data with Finite Element Based Multistart Global Optimisation on Parallel Computers. |
Shterenlikht, Anton; Kashani, Mohammad M.; Alexander, Nicholas A.; Williams, Gethin; Crewe, Adam J. |
Report |
Jan 1, 2017 |
7109 |
| General model for comparative tensile mechanical properties of composites fabricated from fly ash and virgin/recycled high-density polyethylene. |
Kabir, Imrana I.; Sorrell, Charles C.; Mada, Mykanth R.; Cholake, Sagar T.; Bandyopadhyay, Sri |
Report |
Oct 1, 2016 |
9582 |
| Experimental investigation on the effect of specimen size in determining fracture parameters of concrete. |
Siregar, A.P.N.; Rafiq, M.I.; Mulheron, M. |
Report |
Sep 1, 2016 |
4263 |
| Study on shear behavior of concrete-polymer cement mortar at elevated temperature. |
Rashid, K.; Ueda, T.; Zhang, D. |
Report |
Sep 1, 2016 |
5355 |
| Analyzing the performance of a kitchen exhaust air duct with regards to recent standards--a CFD/thermal-stress simulation. |
Hasan, Ali M. |
Report |
Jul 1, 2016 |
2999 |
| Numerical researches of DGRP-type experimental frames using the finite elements method. |
Mikhaylovskiy, D.V.; Matyuschenko, D.M. |
Report |
Jul 1, 2016 |
2885 |
| Numerical simulation for flow-induced stress in injection/compression molding. |
Cao, Wei; Min, Zhiyu; Zhang, Shixun; Wang, Tao; Jiang, Jing; Li, Haimei; Wang, Yaming; Shen, Changyu |
Report |
Mar 1, 2016 |
6554 |
| Toward the accurate modeling of amorphous nonlinear materials--polymer stress relaxation (I). |
Pinto, J.J.C. Cruz; Andre, J.R.S. |
Report |
Mar 1, 2016 |
10945 |
| Analysis of stress-strain state of the spherical shallow shell with inclusion. |
Kozin, O.B.; Papkovskaya, O.B. |
Report |
Mar 1, 2016 |
2382 |
| Predicting the response of shear-critical reinforced concrete beams using response-2000 and SNI 2847:2013. |
Suryanto, B.; Morgan, R.; Han, A.L. |
Report |
Mar 1, 2016 |
3664 |
| The application of statistical design of experiments to study the in-plane shear behaviour of hybrid composite sandwich panel. |
Fajrin, J. |
Report |
Mar 1, 2016 |
3476 |
| Use of waterjet in manufacturing test bars of high-strength steels. |
Jenicek, Stepan; Vratislav, Kotesovec; Kalina, Tomas; Masek, Bohuslav |
Report |
Jan 1, 2016 |
2215 |
| Impact crack initiation and propagation energy of prolonged exploited heat resistant steel. |
Hodzic, Damir; Hajro, Ismar |
Report |
Jan 1, 2016 |
1956 |
| Evaluation of subsurface damage in concrete deck joints using impact echo method. |
Rickard, Larry; Choi, Wonchang |
Report |
Jan 1, 2016 |
3713 |
| Detecting the critical strain of fiber reinforced plastics by means of acoustic emission analysis. |
Willems, Fabian; Benz, Johannes; Bonten, Christian |
Report |
Jan 1, 2016 |
3800 |
| Evaluation of Pt100 sensor deflection effect during strain measurements. |
Walendziuk, Wojciech; Idzkowski, Adam; Machacek, Zdenek; Slanina, Zdenek |
Report |
Aug 1, 2015 |
2676 |
| Mechanical characterization of decayed wood in the field by ultrasound and static bending tests/Caracterizacao mecanica de madeiras deterioradas em campo por meio de ultrassom e flexao estatica. |
Stangerlin, Diego Martins; Corassa, Janaina De Nadai; Gatto, Darci Alberto; Pereira, Roberto Lessa; |
Report |
Jul 1, 2015 |
3706 |
| Fracture of unsaturated polyester and the limitation of layered silicates. |
Chaeichian, Sina; Wood-Adams, Paula M.; Hoa, Suong V. |
Report |
Jun 1, 2015 |
4903 |
| A study of crack-fiber interaction in fiber-reinforced composites using optical caustic method. |
Tang, Can |
Report |
Apr 1, 2015 |
3124 |
| An investigation of stress oscillation in poly(butylene succinate-co-cyclohexanedimethylene succinate). |
Wan, Tong; Zhang, Jie; Liao, Shuang; Du, Tao |
Report |
Apr 1, 2015 |
5944 |
| Stress relaxation and activation volume in tension in [beta]-glucan and chitosan films. |
Hejlova, Anna; Blahovec, Jiri |
Report |
Mar 1, 2015 |
7771 |
| Effects of thermo-fatigue loading, hydrostatic pressure, and heat aging on the free-volume and crystalline structure of polypropylene-co-ethylene random copolymer pipes. |
Deveci, Suleyman; Oner, Mualla |
Report |
Mar 1, 2015 |
6813 |
| Multiaxial ratcheting-fatigue interaction on acrylonitrile-butadiene-styrene terpolymer. |
Chen, Gang; Liang, Hao-qiong; Wang, Lei; Mei, Yun-hui; Chen, Xu |
Report |
Mar 1, 2015 |
4238 |
| Detachable connecting fittings failure loads on plywood furniture/Lahtivoetavate mooblikinnitusfurnituuride purunemine vineerist mooblis. |
Saar, Kaarel; Kers, Jaan; Luga, Ullar; Reiska, Ahto |
Report |
Mar 1, 2015 |
2182 |
| Description of stress fields and displacements at the tip of a rigid, flat inclusion located at interface using modified stress intensity factors. |
Mieczkowski, G. |
Report |
Mar 1, 2015 |
3690 |
| Design and strength analysis of glass fiber-reinforced epoxy composite shelter. |
Wang, Tie; Xu, Jingyu |
Report |
Mar 1, 2015 |
2818 |
| Stress state of the box shell under the indentation of two inclusions. |
Grishin, V.A.; Grishina, V.A.; Reut, V.V. |
Report |
Mar 1, 2015 |
2382 |
| STRENGTH PREDICTION OF NORMAL STRENGTH CONCRETE MADE USING LOCALLY AVAILABLE MATERIALS IN PAKISTAN BY ACCELERATED CURING. |
|
Report |
Feb 28, 2015 |
3335 |
| Observations of T-peel behavior of flexible polymers using digital image correlation. |
Yang, Yabin; Zeng, Pan; Lei, Liping; Xu, Yuejie |
Report |
Jan 1, 2015 |
5417 |
| Reflection photoelastic and finite element residual stress analysis of a torpedo pot for cast iron. |
Liliana, Rusu-Casandra Aurelia; Florin, Baciu; Nicolae, Iliescu |
Report |
Jan 1, 2015 |
2476 |
| Machine tool loads in rotary ultrasonic machining of Alumina, CBN and synthetic diamond. |
Marcel, Kuruc |
Report |
Jan 1, 2015 |
2104 |
| Upper crossbeam of free forging press optimization in order to improve mechanical properties and durability. |
Raz, Karel; Cechura, Milan; Chval, Zdenek |
Report |
Jan 1, 2015 |
1492 |
| Investigation of the influence of alloying elements in Zn-Al alloy on thermal and mechanical properties. |
Kostolny, Igor; Kolenak, Roman |
Report |
Jan 1, 2015 |
1921 |
| Effects of dynamic forces and strain rate during battery-electric bus impact. |
Spirk, Stanislav; Kepka, Miloslav |
Report |
Jan 1, 2015 |
3188 |
| Mechanical properties of epoxy/multi-walled carbon nanotubes composites. |
Ropus, Ivana; Carcia, Gianluca; Giorcelli, Mauro; Tagliaferro, Alberto; Haramina, Tatjana; Curkovic, |
Report |
Jan 1, 2015 |
3798 |
| WARPAGE ANALYSIS VERIFICATION BETWEEN SIMULATION AND EXPERIMENTAL OF DUMBBELL PLASTIC PART IN THE INJECTION MOULDING PROCESS. |
|
Report |
Dec 31, 2014 |
2709 |
| Collective buckling behavior of CNT turfs. |
Torabi, Hamid; Radhkrishnan, Harish; Mesarovic, Sinisa Dj. |
Author abstract |
Dec 1, 2014 |
183 |
| Polyacrylonitrile reinforced PVA based-polymeric networks: structural, morphological, and mechanical aspects. |
Desphande, Deepti S.; Bajpai, Rakesh; Bajpai, Anil K. |
Report |
Nov 1, 2014 |
5872 |
| Mechanical properties and microstructure changes of proton exchange membrane under immersed conditions. |
Shi, Shouwen; Liu, Dan; Liu, Dazhi; Tae, Patrick; Gao, Carrie Y.; Yan, Lei; An, Ke; Chen, Xu |
Report |
Oct 1, 2014 |
4145 |
| Analysis of polymer viscoelastic properties based on compressive creep tests during hot embossing for two-dimensional polyethylene terephthalate nanochannels. |
Yin, Zhifu; Cheng, E.; Zou, Helin; Jurcicek, Petr |
Report |
Oct 1, 2014 |
4463 |
| Effect of montmorillonite and shear stress on the orientation of single walled carbon nanotubes in polypopylene composite fiber. |
Jeong, Du Sik; Choi, Won Seok; Lee, Yong Taek; Ryu, Sung Hun |
Report |
Oct 1, 2014 |
2971 |
| Shear-induced shish-kebab structures in isotactic polypropylene using acicular precipitated calcium carbonate as whisker. |
Vogel, Roland; Boldt, Regine; Vucak, Marijan; Haussler, Liane |
Report |
Sep 1, 2014 |
3376 |
| Experimental and numerical investigation of fracture of abs polymeric material for different sample's thickness using a new loading device. |
Oskui, Abuzar Es'hagi; Choupani, Naghdali; Haddadi, Elyas |
Report |
Sep 1, 2014 |
5951 |
| Transition of neck appearance in polyethylene and effect of the associated strain rate on the damage generation. |
Jar, P.-Y. Ben |
Report |
Aug 1, 2014 |
5289 |
| Mechanical behavior of porous polysiloxane with micropores interconnected by microchannels. |
Hong, Yifeng; Yao, Donggang |
Report |
Jul 1, 2014 |
4593 |
| ESTABLISHMENT OF CORRELATION BETWEEN LOS ANGELES ABRASION LOSS AND STRENGTH DETERMINED THROUGH POINT LOAD INDEX AND SCHMIDT REBOUND HAMMER. |
|
Report |
Jun 30, 2014 |
2037 |
| Wing and power loading: understanding their implications for fight. |
Banner, Michael J. |
|
Jun 1, 2014 |
2975 |
| Anomalous first normal stress difference behavior of polymer nanocomposites and liquid crystalline polymer composites. |
Narimissa, Esmaeil; Rahman, Ahmed; Gupta, Rahul K.; Kao, Nhol; Bhattacharya, Sati N. |
Report |
Jun 1, 2014 |
9124 |
| Study of the influence of adding styrene-ethylene/ butadiene-styrene in acrylonitrile-butadiene-styrene and polyethylene blends. |
Peydro, M.A.; Parres, F.; Navarro, R.; Sanchez-Caballero, S. |
Report |
Jun 1, 2014 |
7604 |
| Static and Dynamic Compressive Properties of Polypropylene/Zinc Oxide Nanocomposites. |
Omar, Mohd Firdaus; Akil, Hazizan Md; Ahmad, Zainal Arifin; Mahmud, Shahrom |
Report |
Apr 1, 2014 |
6415 |
| An investigation on the effect of cyclic displacement on the integral bridge abutment. |
Movahedifajr, Mojtaba; Bolouri-Bazaz, Jafar |
Report |
Apr 1, 2014 |
7589 |
| Sensitivity analysis of the stress state in shell courses of welded tanks for oil storage. |
Kala, Zdenek; Gottvald, Jakub; Stonis, Jakub; Omishore, Abayomi |
Report |
Mar 1, 2014 |
2854 |
| The influence of prestress losses on the anchorage zone of prestressed concrete member/Itemptuju gelzbetoniniu elementu itempiu nuostoliu itaka inkaravimo zonai. |
Jokubaitis, Aidas; Valivonis, Juozas; Zubrus, Adomas |
Report |
Mar 1, 2014 |
4047 |
| A simple analytical model for estimation of melt film variables in thermoplastic vibration welding. |
Patham, Bhaskar; Foss, Peter H. |
Report |
Mar 1, 2014 |
8541 |
| Essential work of fracture analysis of short glass fiber and/or calcite reinforced ABS/PA6 composites. |
Yilmaz, Sinan; Yilmaz, Taner; Kahraman, Biricik |
Report |
Mar 1, 2014 |
5029 |
| Fatigue behavior and modeling of thermoplastics including temperature and mean stress effects. |
Mellott, Stephen R.; Fatemi, Ali |
Report |
Mar 1, 2014 |
6840 |
| Modeling nonlinear stress relaxation of polymers. |
Andre, J.R.S.; Pinto, J.J.C. Cruz |
Report |
Feb 1, 2014 |
9509 |
| Analytical model to predict multiaxial laminate fracture toughness from 0[degrees] ply fracture toughness. |
Mohammed, Y.; K. Hassan, Mohamed; Hashem, A.M. |
Report |
Jan 1, 2014 |
2912 |
| Numerical simulation of rock fragmentation under the impact load of water jet. |
Hongxiang, Jiang; Changlong, Du; Songyong, Liu; Kuidong, Gao |
Report |
Jan 1, 2014 |
5872 |
| Vibration analysis of a postbuckled microscale FG beam based on modified couple stress theory. |
Ansari, R.; Ashrafi, M.A.; Pourashraf, T.; Hemmatnezhad, M. |
Report |
Jan 1, 2014 |
7315 |
| Experimental and theoretical research on the compression performance of CFRP sheet confined GFRP short pipe. |
Li, Feng; Zhao, Qilin; Chen, Li; Shao, Guojian |
Report |
Jan 1, 2014 |
6156 |
| Nanoscale strain fields research of boundaries between B2 matrix and G.P. zone in Ni-Ti alloy thin films. |
Zhao, Shilei; Zhao, Chunwang |
Report |
Jan 1, 2014 |
2306 |
| Experimental and numerical study on tensile strength of concrete under different strain rates. |
Min, Fanlu; Yao, Zhanhu; Jiang, Teng |
Report |
Jan 1, 2014 |
6671 |
| Collapse pressure analysis of transversely isotropic thick-walled cylinder using Lebesgue strain measure and transition theory. |
Aggarwal, A.K.; Sharma, Richa; Sharma, Sanjeev |
Technical report |
Jan 1, 2014 |
4832 |
| The effect analysis of strain rate on power transmission tower-line system under seismic excitation. |
Tian, Li; Wang, Wenming; Qian, Hui |
Report |
Jan 1, 2014 |
5118 |
| Effect of repeated thermal shock on mechanical properties of Zr[B.sub.2]-SiC-BN ceramic composites. |
Li, Gang; Chen, Hongbo |
Report |
Jan 1, 2014 |
4154 |
| Assessment of the mechanical properties of sisal fiber-reinforced silty clay using triaxial shear tests. |
Wu, Yankai; Li, Yanbin; Niu, Bin |
Report |
Jan 1, 2014 |
3827 |
| Reduction of free edge peeling stress of laminated composites using active piezoelectric layers. |
Huang, Bin; Kim, Heung Soo |
Report |
Jan 1, 2014 |
6132 |
| Remarks on residual stress measurement by hole-drilling and electronic speckle pattern interferometry. |
Barile, Claudia; Casavola, Caterina; Pappalettera, Giovanni; Pappalettere, Carmine |
Report |
Jan 1, 2014 |
4978 |
| A new multiconstraint method for determining the optimal cable stresses in cable-stayed bridges. |
Asgari, B.; Osman, S.A.; Adnan, A. |
Report |
Jan 1, 2014 |
5287 |
| Prediction of frequency for simulation of asphalt mix fatigue tests using MARS and ANN. |
Ghanizadeh, Ali Reza; Fakhri, Mansour |
Report |
Jan 1, 2014 |
6929 |
| Deformation failure characteristics of coal body and mining induced stress evolution law. |
Wen, Zhijie; Qu, Guanglong; Wen, Jinhao; Shi, Yongkui; Jia, Chuanyang |
Report |
Jan 1, 2014 |
4326 |
| Mechanical and morphological properties of polypropylene/nano [alpha]-[Al.sub.2][O.sub.3] composites. |
Mirjalili, F.; Chuah, L.; Salahi, E. |
Report |
Jan 1, 2014 |
8060 |
| Determine the compressive strength of calcium silicate bricks by combined nondestructive method. |
Brozovsky, Jiri |
Report |
Jan 1, 2014 |
3006 |
| Stress-strain behavior of cementitious materials with different sizes. |
Zhou, Jikai; Qian, Pingping; Chen, Xudong |
Report |
Jan 1, 2014 |
5338 |
| Effect of fast freeze-thaw cycles on mechanical properties of ordinary-air-entrained concrete. |
Shang, Huai-Shuai; Cao, Wei-Qun; Wang, Bin |
Report |
Jan 1, 2014 |
4195 |
| Semi-analytical solution based on strip method for buckling and vibration of isotropic plate. |
Sayad, Mohamed A. El-; Farag, Ahmed M. |
Report |
Jan 1, 2014 |
4051 |
| Signal feature extraction and quantitative evaluation of metal magnetic memory testing for oil well casing based on data preprocessing technique. |
Liu, Zhilin; Liu, Lutao; Zhang, Jun |
Report |
Jan 1, 2014 |
5358 |
| Simplified load distribution factors for fiber reinforced polymer composite bridge decks/Supaprastinti apkrovos pasiskirstymo koeficientai tiltams su pluostu armuoto polimero paklotu/Vienkarsota slodzes sadalijuma koeficienta noteiksana kompozitam, ar skiedram stiegrotam polimera tilta klajam/Lihtsustatud koormusjaotustegurid fiibriga armeeritud polumeerkomposiit silladekile. |
Prachasaree, Woraphot; Sookmanee, Pongsak; Limkatanyu, Suchart; GangaRao, Hota V.S. |
Report |
Dec 1, 2013 |
4701 |
| Behaviour analysis and engineering calculation of the stress-ribbon bridge with external tendons/Dvijuoscio lankstaus kabamojo plieno tilto elgsenos analize ir inzinerinis skaiciavimas. |
Sandovic, Giedre; Juozapaitis, Algirdas |
Report |
Dec 1, 2013 |
3158 |
| Shear strain analysis in FSS microchannel. |
Sauli, Zaliman; Retnasamy, Vithyacharan; Nadzri, Nor Shakirina; Mei, Tan Hsio; Kamarudin, Hussin |
Report |
Oct 30, 2013 |
1900 |
| Tensile properties and FTIR analysis of HDPE/soya spent powder in oven aging. |
Sam, S.T.; Kurniati, A. Norsri; Noriman, N.Z.; Ragunathan, S.; Ismail, H. |
Report |
Oct 30, 2013 |
1890 |
| Shear strain analysis in FSS microchannel. |
Sauli, Zaliman; Retnasamy, Vithyacharan; Nadzri, Nor Shakirina; Mei, Tan Hsio; Kamarudin, Hussin |
Report |
Oct 1, 2013 |
1900 |
| Experimental study on the flexural and shear analysis of concrete beams reinforced with glass fiber-reinforced (GFRP) bars/Stiklo pluosto armatura armuotu siju, isankstinio itempimo itakos laikomajai galiai ir standumui eksperimentinis tyrimas. |
Atutis, Edgaras; Budvytis, Marius; Atutis, Mantas |
Report |
Oct 1, 2013 |
3144 |
| Determining the residual strength of SFRC flexural members/Lenkiamuju plieno plausu armuotu betoniniu elementu liekamojo stiprio nustatymas. |
Meskenas, Adas; Rimkus, Arvydas |
Report |
Oct 1, 2013 |
1642 |
| Research into the reliability of the bridge of a car carrier platform/Automobilvezio platformos tiltelio patikimumo tyrimas. |
Paskevicius, Paulius; Nagurnas, Saulius; Bureika, Gintautas; Zuraulis, Vidas |
Report |
Oct 1, 2013 |
1739 |
| Modification of tensile and impact properties of poly(butylene terephthlate) by incorporation of styrene-ethylene-butylene-styrene and maleic anhydride-grafted-SEBS (SEBS-g-MA) terpolymer. |
Sharma, Rajul; Maiti, S.N. |
Report |
Oct 1, 2013 |
6336 |
| First normal stress difference in capillary extrusion flow of nanometer calcium carbonate-filled PLLA biocomposites. |
Liang, Ji-Zhao |
Report |
Aug 1, 2013 |
3897 |
| Pressure vessel with corrugated core numerical strength and experimental analysis/Gofruoto koreto slegio indo stiprumo skaitinis ir eksperimentinis tyrimas. |
Ziliukas, A.; Kukis, M. |
Report |
Jul 1, 2013 |
3005 |
| Navier-type bending analysis of general composite laminates under different types of thermomechanical loading/Skirtingu tipu paprastu kompoziciniu laminatu, veikiamu termomechaniniu navje lenkimo apkrovu, tyrimai. |
Torabizadeh, M.A.; Fereidoon, A. |
Report |
Jul 1, 2013 |
5475 |
| Some considerations on the mechanical testing of aluminum-steel conductors and their cores/Aliuminio ir plieno laidininku ir ju serdziu mechaniniu bandymu svarba. |
Dumitru, I.; Marsavina, L.; Faur, N.; Kun, L. |
Report |
Jul 1, 2013 |
2827 |
| Segmentation of piezoelectric layers based on the numerical study of normal strain distributions in bimorph cantilevers vibrating in the second transverse mode/normaliniu deformaciju pasiskirstymo optimalios formos bimorfinese gembese, zadinamose antruoju rezonansiniu dazniu, tyrimas ir pjezoelektriniu sluoksniu segmentavimas. |
Zizys, D.; Gaidys, R.; Dauksevicius, R.; Ostasevicius, V. |
Report |
Jul 1, 2013 |
4628 |
| Stress-assisted formation of surface gratings on polymer films. |
Lin, Chiao-Chi; Yang, Fuqian; Chin, Joannie W.; Sung, Lipiin; Lee, Sanboh |
Report |
Jul 1, 2013 |
5738 |
| Effects of the functionalizing agent, itaconic acid, on the mechanical properties of microemulsion-made core/shell polymers. |
Rabelero, Martin; Trujillo, Agustin; Ceja, Israel; Canche, Gonzalo; Mendizabal, Eduardo; Esquena, Jo |
Report |
Jul 1, 2013 |
4883 |
| Utilisation of artificial neural network for the analysis of interlayer shear properties/ Dirbtinio neuroninio tinklo naudojimas tarpsluoksniu slyties savyb?ms analizuoti/ Maksligo neiralo tiklu izmantosana starpslanu bides ipasibu analize/ Kunstlike narvivorkude kasutamine siduskihtide nihkeomaduste analuusil. |
Raab, Christiane; Halim, Abd El Halim Omar Abd El; Partl, Manfred Norbert |
Report |
Jun 1, 2013 |
6598 |
| Finite element modeling of mechanical stresses to IC bond pads. |
Hunter, Stevan; Warnick, Rob; Gohnert, Ryan; Dutson, Alan |
Author abstract |
Jun 1, 2013 |
192 |
| Time-dependent response of polypropylene/clay nanocomposites under tension and retraction. |
Drozdov, Alekse D.; Christiansen, Jesper deC. |
Report |
May 1, 2013 |
6013 |
| Finite element analysis and comparative study on stresses induced on UHMWPE acetabular cup surface of the artificial hip implant during free walking and walking while carrying weights. |
Atreya, Vibhor; Agarwal, Pradyumn |
Report |
Apr 1, 2013 |
1832 |
| Stress analysis of femoral hip with bone resorption. |
Shuib, Solehuddin; Sahari, B.B.; Voon, Wong Shaw; Arumugam, Manohar; Kadarman, A. Halim |
Report |
Apr 1, 2013 |
2738 |
| Experimental and numerical stress analysis of FML plates with cutouts under in-plane loading/Eksperimentine ir skaitine PML ploksteliu su ispjovomis itempiu analize, kai ju plokstuma yra apkrauta. |
Yazdani, Saleh; Rahimi, G.H.; Ghanbari, Mehdi |
Report |
Mar 1, 2013 |
3789 |
| The tensile force oscillation of polycarbonate at elevated temperatures. |
Chiang, Donyau; Tsai, Meng-Leung; Lee, Sanboh |
Report |
Mar 1, 2013 |
4917 |
| Stress-strain analysis of sand subjected to triaxial loading/Smelio bandinio itempiu ir deformaciju analize tiriant triasio slegio aparate/Triaksialajai slogosanai paklautas smilts sprieguma--deformacijas analize/Kolmeteljelisele survele allutatud liiva pingedeformatsioonide analuus. |
Dirgeliene, Neringa; Norkus, Arnoldas; Amsiejus, Jonas; Skuodis, Sarunas; Zilioniene, Daiva |
Report |
Mar 1, 2013 |
3442 |
| Research on model fitting and strength characteristics of critical state for expansive soil. |
Li, Zhiqing; Tang, Chuan; Hu, Ruilin; Zhou, Yingxin |
Report |
Feb 1, 2013 |
3786 |
| Experimental and numerical investigation of sand compression peculiarities. |
Skuodis, Sarffnas; Norkus, Arnoldas; Tumonis, Liudas; Amsiejus, Jonas; Aksamitauskas, Ceslovas |
Report |
Feb 1, 2013 |
3977 |
| The deformation behavior of polypropylene film under high strain rates. |
Tokihisa, Masayoshi; Kushizaki, Yoshiyuki; Tomiyama, Hideki; Umeda, Yuki; Yamada, Toshiro |
Report |
Feb 1, 2013 |
6640 |
| The elastoplastic concrete strain influence on the cracking moment and deformation of rectangular reinforced concrete elements/Tampriai plastiniu deformaciju itaka gelzbetoniniu staciakampio skerspjuvio elementu pleisejimo momentui ir deformacijoms. |
Augonis, M.; Zadlauskas, S. |
Report |
Jan 1, 2013 |
3872 |
| A preliminary approach to the load and stress analysis of the arc-shaped corrugated steel structure/Arkines gofruoto plieno konstrukcijos preliminari apkrovu ir itempiu analize. |
Narvydas, E.; Puodziuniene, N. |
Report |
Jan 1, 2013 |
3863 |
| Comparative study on interface elements, thin-layer elements, and contact analysis methods in the analysis of high concrete-faced Rockfill dams. |
Qian, Xiao-xiang; Yuan, Hui-na; Li, Quan-ming; Zhang, Bing-yin |
Report |
Jan 1, 2013 |
5673 |
| Comparison between Duncan and Chang's EB model and the generalized plasticity model in the analysis of a high earth-rockfill dam. |
Dong, Weixin; Hu, Liming; Yu, Yu Zhen; Lv, He |
Report |
Jan 1, 2013 |
4870 |
| Bending moment calculations for piles based on the finite element method. |
Jie, Yu-xin; Yuan, Hui-na; Zhou, Hou-de; Yu, Yu-zhen |
Report |
Jan 1, 2013 |
5841 |
| Effect of expansive admixtures on the shrinkage and mechanical properties of high-performance fiber-reinforced cement composites. |
Choi, Won-Chang; Yun, Hyun-Do |
Report |
Jan 1, 2013 |
6130 |
| Static testing of a bridge using an interferometric radar: the case study of "Ponte degli Alpini," Belluno, Italy. |
Dei, Devis; Mecatti, Daniele; Pieraccini, Massimiliano |
Report |
Jan 1, 2013 |
2270 |
| Thermal stability analysis under embankment with asphalt pavement and cement pavement in permafrost regions. |
Junwei, Zhang; Jinping, Li; Xiaojuan, Quan |
Report |
Jan 1, 2013 |
6714 |
| Freeze-thaw durability of air-entrained concrete. |
Shang, Huai-Shuai; Yi, Ting-Hua |
Report |
Jan 1, 2013 |
3684 |
| Methodology for assessing the probability of corrosion in concrete structures on the basis of half-cell potential and concrete resistivity measurements. |
Sadowski, Lukasz |
Report |
Jan 1, 2013 |
3931 |
| Mechanical properties of recycled concrete in marine environment. |
Wang, Jianxiu; Huang, Tianrong; Liu, Xiaotian; Wu, Pengcheng; Guo, Zhiying |
Report |
Jan 1, 2013 |
4200 |
| Performance evaluation and microstructure characterization of metakaolin-based geopolymer containing oil palm ash. |
Hawa, Abideng; Tonnayopas, Danupon; Prachasaree, Woraphot |
Report |
Jan 1, 2013 |
5220 |
| The analysis of shear strength of flexural RC elements according to EC2 and STR/Lenkiamuju gelzbetoniniu elementu istrizojo pjuvio stiprumo pagal STR ir EC2 analize. |
Kelpsa, Sarunas; Augonis, Mindaugas |
Report |
Dec 1, 2012 |
4635 |
| Nonlinear stability of a single-layer hybrid grid shell. |
Cai, Jianguo; Xu, Yixiang; Feng, Jian; Zhang, Jin |
Report |
Oct 1, 2012 |
5126 |
| Determination of stress-strain characteristics of thin polymer films on cylindrical specimens/Ohukeste polumeerkilede pinge-deformatsioonikarakteristikute maaramine silindrilistel katsekehadel. |
Auzins, Ernests; Gluhih, Sergey; Jelinska, Natalja; Cerpakovska, Dace; Kalnins, Martins |
Report |
Sep 1, 2012 |
3067 |
| Assessment of residual stresses in steels and carbide composites by load and depth sensing indentation with spherical indenter/Terastes ja karbiidkomposiitides esinevate jaakpingete hindamine kuulindentoriga koormus-sugavuskontrollitava indenteerimise teel. |
Sergejev, Fjodor; Petrov, Mihhail |
Report |
Sep 1, 2012 |
3085 |
| Stress concentration at the shallow notches of the curved beams of circular cross-section/Itempiu koncentracija ties negiliais grioveliais kreivuose apvalaus skerspjuvio strypuose. |
Narvydas, E.; Puodziuniene, N. |
Report |
Jul 1, 2012 |
2923 |
| Uniaxial compression and combined Compression-and-Shear response of amorphous polycarbonate at high loading rates. |
Prakash, Vikas; Mehta, Namit |
Report |
Jun 1, 2012 |
9970 |
| Fatigue strength investigation of four type cast irons specimens/Keturiu ketaus rusiu bandiniu ciklinio stiprumo tyrimas. |
Leonavicius, M.K.; Stupak, E.; Krenevicius, A.; Norkus, A. |
Report |
May 1, 2012 |
3160 |
| General buckling analysis of steel built-up columns using finite element modelling/ Plieniniu spragotuju kolonu bendrojo pastovumo skaiciavimas, modeliuojant uzdavini baigtiniais elementais. |
Sapalas, Vaidotas; Sauciuvenas, Gintas; Komka, Arunas |
Report |
Mar 1, 2012 |
2164 |
| Circumferential stress concentration factors at the asymmetric shallow notches of the lifting hooks of trapezoidal cross-section/Trapecinio skerspjuvio kelimo kabliu apskritiminiu itempiu koncentracijos ties asimetriniais pavirsiniais grioveliais koeficientai. |
Narvydas, E.; Puodziuniene, N. |
Report |
Mar 1, 2012 |
3437 |
| On the inhomogeneity of residual stresses in tempered glass panels/Karastatud klaaspaneelide jaakpingete mittehomogeensusest. |
Anton, Johan; Errapart, Andrei; Paemurru, Mart; Lochegnies, Dominique; Hodemann, Siim; Aben, Hillar |
Report |
Mar 1, 2012 |
2127 |
| Determination of three-dimensional in situ stresses from anelastic strain recovery (ASR) of Wenchuan Earthquake Fault Scientific Drilling-1 (WFSD-1). |
|
Report |
Dec 31, 2011 |
546 |
| Is the deformation around the MCT, 2D or 3D deformation? |
|
Report |
Dec 31, 2011 |
688 |
| Strain partitioning during dome formation in the Himalaya: Insights into the Ama Drime Massif and Leo Pargil dome, NW India. |
|
Report |
Dec 31, 2011 |
811 |
| A strain-heating model for the seismic low-velocity zone along the Main Himalaya Thrust. |
|
Author abstract |
Dec 31, 2011 |
939 |
| The analysis of geometrically nonlinear elastic-plastic space frames/Tampriai plastiniu geometriskai netiesiniu erdviniu remu analize. |
Karkauskas, Romanas; Popov, Michail |
Report |
Dec 1, 2011 |
6487 |
| Bearing capacity of axially loaded timber members--estimation under uneven fire action/Mediniu centriskai gniuzdomu elementu, netolygiai veikiamu ugnies laikomosios galios, skaiciavimas. |
Sauciuvenas, Gintas; Sapalas, Antanas; Griskevicius, Mecislovas |
Report |
Dec 1, 2011 |
4637 |
| The analysis of stress deformation state peculiarities of masonry units and bed joints/ Muro gaminiu ir gulsciuju siuliu itempiu deformaciju buvio ypatumu analize. |
Zavalis, Robertas; Jonaitis, Bronius |
Report |
Sep 1, 2011 |
2506 |
| A short-term deformation analysis method of flexural reinforced concrete members/ Naujasis lenkiamojo gelzbetoninio elemento, veikiamo trumpalaikes apkrovos, kreiviu apskaiciavimo metodas. |
Girdzius, Rokas; Kaklauskas, Gintaris; Zamblauskaite, Renata; Jakubovskis, Ronaldas |
Report |
Sep 1, 2011 |
3734 |
| Buckling analysis of composite long cylinders using probabilistic finite element method/Kompoziciniu ilgu cilindru klupimo analize tikimybiniu baigtiniu elementu metodu. |
Cai, Baoping; Liu, Yonghong; Li, Huazhou; Liu, Zengkai |
Report |
Sep 1, 2011 |
3777 |
| Buckling of elastic beams by the Haar wavelet method/Elastsete talade notke uurimine Haari lainikute meetodil. |
Lepik, Ulo |
Report |
Sep 1, 2011 |
4712 |
| The influence of rock properties and size into strength criteria: a proposed criterion for soft rock masses. |
Agustawijaya, D.S. |
Report |
Sep 1, 2011 |
4206 |
| Biaxial stretching of polymers using a novel and versatile stretching system. |
Qaiss, A.; Bousrnina, M. |
Report |
Jul 1, 2011 |
3215 |
| Modification of novel bio-based resin-epoxidized soybean oil by conventional epoxy resin. |
Gupta, A.P.; Ahmad, Sharif; Dev, Anshu |
Report |
Jun 1, 2011 |
2245 |
| Permanent strain development dynamics for asphalt pavement materials/Asfaltinems dangoms naudojamu medziagu liekamosios deformacijos kitimo dinamika/ Paliekoso deformaciju attistibas dinamika asfaltbetona seguma materialiem/ Pusivate deformatsioonide tekkedunaamika asfaltkatte materjalides. |
Haritonovs, Viktors |
Report |
Jun 1, 2011 |
4549 |
| Stress buster. |
Thilmany, Jean |
Brief article |
May 1, 2011 |
254 |
| A simplified approach for predicting early-age concrete pavement deformation/Supaprastintas metodas, prognozuojantis ankstyvojo betono dangos deformacijas. |
Kim, Sunghwan; Gopalakrishnan, Kasthurirangan; Ceylan, Halil |
Report |
Mar 1, 2011 |
4536 |
| A model for strength and strain analysis of steel fiber reinforced concrete/Betono, armuoto plienine dispersine armatura, stiprio ir deformaciju apskaiciavimo modelis. |
Marciukaitis, Gediminas; Salna, Remigijus; Jonaitis, Bronius; Valivonis, Juozas |
Report |
Mar 1, 2011 |
6178 |
| Analysis of tensile test results for poly(acrylonitrile-butadiene-styrene) based on Weibull distribution. |
Jar, P.-Y. Ben; Xu, Jie |
Report |
Mar 1, 2011 |
7720 |
| Comparisons of measured and predicted pavement strain in full-scale accelerated pavement testing/Ismatuotu ir numatomu kelio dangos deformaciju palyginimas atliekant naturaluji spartuji kelio dangu bandyma/Izmerito un prognozeto segas deformaciju salidzinajums pilna meroga paatrinatajos segas testos/Katendi moodetud ja prognoositud deformatsioonide vordlus taismootmelises raskeliikluse simulaatori katses. |
Park, Dae-Wook; Kim, In-Tai |
Report |
Dec 1, 2010 |
4425 |
| Statistical evaluation of low cycle stress-strain curves parameters for alloyed structural steels weld metals at room and elevated temperature/Legiruotuju plienu suvirinimo siuliu medziagu deformavimo diagramu parametru statistinis ivertinimas kambario ir aukstesneje temperaturoje. |
Daunys, M.; Stulpinaite, A.; Sniuolis, R. |
Report |
Sep 1, 2010 |
3767 |
| Elastic analysis of pressurized thick hollow cylindrical shells with clamped-clamped ends/Plonasieniu hermetiniu cilindru su uzsandarintais galais tamprioji analize. |
Ghannad, M.; Nejad, M. Zamani |
Report |
Sep 1, 2010 |
3155 |
| Investigation into the stress/strain state of a big bay frame considering support settlement/Ploksciojo didelio tarpatramio remo itemptojo ir deformuotojo buvio tyrimas, atsizvelgiant i atramu poslinkius. |
Samofalov, Michail; Janovic, Miroslav; Tumosa, Kestutis |
Report |
Sep 1, 2010 |
4512 |
| Application of digital image correlation method to biogel. |
Kwon, H.J.; Rogalsky, Allan D.; Kovalchick, Christopher; Ravichandran, Guruswami |
Report |
Aug 1, 2010 |
5579 |
| The model of bent threaded connection in three segments/ Triju ruozu lenkiamos srigines jungties modelis. |
Krenevicius, A.; Juchnevicius, Z.; Leonavicius, M.K. |
Report |
Jul 1, 2010 |
3996 |
| Numerical and experimental investigation on ultimate strength of cracked cylindrical shells subjected to combined loading/ Skaitmeninis ir eksperimentinis plonasieniu cilindru su plysiu stiprumo tyrimas esant kombinuotam apkrovimui. |
Shariati, M.; Sedighi, M.; Saemi, J.; Eipakchi, H.R.; Allahbakhsh, H.R. |
Report |
Jul 1, 2010 |
4973 |
| Meshless analysis of cracked functionally graded materials under thermal shock/ Funkcionaliai kokybisku termiskai apkrautu medziagu suirimo analize. |
Nazari, M.B.; Shariati, M.; Eslami, M.R.; Hassani, B. |
Report |
Jul 1, 2010 |
4612 |
| Effect of sparse long-chain branching on the step-strain behavior of a series of well-defined polyethylenes. |
McGrady, Christopher D.; Seay, Christopher W.; Mazahir, Syed M.; Baird, Donald G. |
Report |
Jul 1, 2010 |
5510 |
| Flat oval duct leakage class measurement. |
Gibbs, D.C.; Idem, S. |
Report |
Jul 1, 2010 |
3439 |
| Reliability and durability assessment of concrete and composite structures/Betoniniu ir kompozitiniu konstrukciju patikimumo bei ilgaamziskumo vertinimas. |
Brauns, Janis; Rocens, Karlis |
Report |
Jun 1, 2010 |
3424 |
| Reinforcement characteristics of prestressed concrete beams with fiber-reinforced polymer (FRP) tendons/Lenkiamuju is anksto itemptu gelzbetoniniu elementu armavimo kompozitine armatura ypatumai. |
Atutis, Mantas; Valivonis, Juozas |
Report |
Jun 1, 2010 |
2834 |
| Space frame lattice model for stress analysis of bridge/Erdvinio tinklelio modelis tiltu itempiams nustatyti/Spriegumu analize tiltu konstrukcijam izmantojot telpisku rezgotas kopnes modeli/Ruumraami voremudel silla pingeanaluusiks. |
Liu, Chao; Xu, Dong |
Report |
Jun 1, 2010 |
2437 |
| Research and evaluation of methods for determining deformation modulus of a base course of road pavement/Deformacijos modulio nustatymo metodu ant dangos pagrindo sluoksnio tyrimai ir vertinimas/Cela segas pamata deformacijas modela noteiksanas metodes izpete un novertesana/Tee aluse deformatsioonimooduli maaramismeetodite uuring ja hindamine. |
Bertuliene, Lina; Laurinavicius, Alfredas; Vaitkus, Audrius |
Report |
Jun 1, 2010 |
4027 |
| On non-destructive residual stress measurement in glass panels/Jaakpingete mittepurustav maaramine klaaspaneelides. |
Aben, Hillar; Anton, Johan; Errapart, Andrei; Hodemann, Siim; Kikas, Jaak; Klaassen, Helina; Lamp, M |
Report |
Jun 1, 2010 |
1587 |
| Cyclic interaction between normal and shear stresses of an epoxy polymer--experiments and model predictions. |
Xia, Zihui; Shen, Xinghe; Ellyin, Fernand |
Report |
May 1, 2010 |
4676 |
| Shear properties of epoxy under high strain rate loading. |
Naik, Niranjan K.; Gadipatri, Ravikumar; Thoram, Narasimha Moorthy; Kavala, Venkateswara Rao; Ch, Ve |
Report |
Apr 1, 2010 |
5309 |
| An improved method for Single Fiber Tensile Test of natural fibers. |
Hu, Wei; Ton-That, Minh-Tan; Perrin-Sarazin, Florence; Denault, Johanne |
Report |
Apr 1, 2010 |
4412 |
| Determination of plane-strain fracture toughness of polyethylene copolymer based on the concept of essential work of fracture. |
Jar, P.-Y. Ben; Adianto, Riski |
Report |
Mar 1, 2010 |
4204 |
| Compressive strength of volcanic ash/ordinary Portland cement laterized concrete. |
Olawuyi, B.J.; Olusola, K.O. |
Report |
Mar 1, 2010 |
3950 |
| Effect of steel fibers on the behavior of over-reinforced beams subjected to pure torsion. |
Gunneswara Rao, T.D.; Rama Seshu, D.; Warnitchai, P. |
Report |
Mar 1, 2010 |
4193 |
| Analytical solution for penetration of deformable blunt projectiles into the metallic targets/Analitinis ardanciojo buko sviedinio isiskverbimo i metalini taikini skaiciavimas. |
Radmehr, D.; Liaghat, G.H.; Felli, S.; Naderi, D. |
Report |
Mar 1, 2010 |
5692 |
| Determination of residual welding stresses in load bearing structures made of welded hollow sections/Liekamuju itempiu nustatymas apkrovas perimanciose konstrukcijose, pagamintose is suvirintu vamzdiniu profiliu/Paliekoso metinasanas spriegumu noteiksana nesosa konstrukcija no slegta proila metinatam dalam/Keevitamise jaavpinge maaramine koormust kandvates keevitatud ooneskonstruktsioonides. |
Ziliukas, Antanas; Surantas, Andrius |
Report |
Mar 1, 2010 |
2422 |
| Estimation of account the flanges in the direct calculation of stress-strain state parameters at normal sections of structural members/Lentynu ivertinimas tiesiogiai apskaiciuojant itempiu-deformaciju buvio parametrus konstrukciniu elementu statmenuose pjuviuose. |
Zidonis, I. |
Report |
Jan 1, 2010 |
3231 |
| Investigation of fracture of inhomogeneous cast iron specimens/Nevienalyciu ketaus bandiniu irimo tyrimas. |
Stupak, E. |
Report |
Jan 1, 2010 |
2951 |
| Accelerated stress testing of control systems. |
Tanuska, Pavol; Spendla, Lukas; Vlkovic, Ondrej |
Report |
Jan 1, 2010 |
1428 |
| Finite element analysis of the flexible coupling with metallic membranes. |
Dobre, Daniel; Simion, Ionel; Adir, Victor Gabriel; Adir, George Mihail; Pascu, Nicoleta |
Report |
Jan 1, 2010 |
1443 |
| Isochromatic analysis of the groove axes for frame drafting. |
Paunescu, Daniela; Hancu, Liana; Suciu, Mihaela; Paunescu, Mihai-Valentin |
Report |
Jan 1, 2010 |
1362 |
| New convolutional approach of estimation of incertainty of compressive strength test results on some rocks. |
Rebrisoreanu, Mircea Traian Ion; Pencea, Ion; Dumitrescu, Ioan; Traista, Eugen; Nimara, Ciprian; Pos |
Report |
Jan 1, 2010 |
1907 |
| Experimental reserches on the yarn tension variation influenced by the ring position against textile spindle specific to ring frames. |
Hanganu, Lucian Constantin; Grigoras, Stefan; Stirbu, Cristel; Hadar, Anton |
Report |
Jan 1, 2010 |
1598 |
| Methods of examination stress in the welding process. |
Kravarikova, Helena |
Report |
Jan 1, 2010 |
1197 |
| Stress analysis of a rolling slideway. |
Rusu-Casandra, Aurelia; Iliescu, Nicolae; Baciu, Florin |
Report |
Jan 1, 2010 |
1002 |
| Pulsating tension tests on glass fiber reinforced plastics. |
Natanail, Razvan; Duse, Dan Maniu |
Report |
Jan 1, 2010 |
1006 |
| FEM analyses of connections for several structures of a hydraulic radial forging machine. |
Masek, Bohuslav; Hronek, Pavel; Stadler, Ctibor |
Report |
Jan 1, 2010 |
1100 |
| Low cycle stress strain curves and fatigue under tension-compression and torsion/Mazaciklio deformavimo ir suirimo kreives esant tempimui-gniuzdymui ir sukimui. |
Daunys, M.; Cesnavicius, R. |
Report |
Nov 1, 2009 |
2915 |
| Determination of stresses and strains in two-layer mechanically inhomogeneous pipe subjected to internal pressure at elastic plastic loading/Dvisluoksnio mechaniskai nevienalycio tampriai plastiskai deformuojamo vamzdzio, veikiamo vidinio slegio, itempiu ir deformaciju nustatymas. |
Brazenas, A.; Vaiciulis, D. |
Report |
Nov 1, 2009 |
3383 |
| Effects of temperature on tensile strength of Kevlar reinforced composite materials. |
Chaitep, Sumpun; Rungsiyakull, Chaiy; Watanawanyoo, Pipatpong |
Report |
Oct 1, 2009 |
1828 |
| Material and geometrical characteristics of structural steels based on statistical analysis of metallurgical products/Statybinio plieno mechaniniu ir geometriniu charakteristiku nustatymas taikant metalurgijos produktu statistine analize. |
Kala, Zdenek; Melcher, Jindrich; Puklicky, Libor |
Report |
Sep 1, 2009 |
4775 |
| To study the performance of E-Glass fibre composite cladding on the shear and flexure zones of reinforced concrete beams. |
Govindarajan, S.; Muthuramu, K.L.; Chandran, A. |
Report |
Sep 1, 2009 |
1900 |
| Applicability of fuzzy logic to the definition of the buckling length of steel plane frames/Formaliosios logikos analizes pritaikymas ploksciu remu skaiciuojamuju ilgiu nustatymui. |
Kala, Zdenek; Omishore, Abayomi; Puklicky, Libor |
Report |
Sep 1, 2009 |
2746 |
| Tensile, compressive and flexural strength reduction of timber in fire/Medienos tempiamojo, gniuzdomojo ir lenkiamojo stiprio mazejimas gaisro salygomis. |
Bednarek, Zoja; Griskevicius, Mecislavas; Sauciuvenas, Gintas |
Report |
Sep 1, 2009 |
3682 |
| Conceptualisation studies on the development of adaptive interface in infilled frames. |
Satyanarayanan, K.S.; Lakshmipathy, M.; Ganesan, T.P. |
Report |
Aug 1, 2009 |
3296 |
| Turmeric FRP composites: experimental determination of flexural and impact properties. |
Srinivasababu, N.; Rao, K. Murali Mohan; Kumar, J. Suresh |
Report |
Jul 1, 2009 |
2688 |
| Laboratory studies on unconfined compressive strength of solid waste landfill liner material. |
Venkatesan, G.; Swaminathan, G. |
Report |
Jul 1, 2009 |
2543 |
| An analysis of beam elongation influence to postbuckling displacements under displacement dependent axial force/Strypo pailgejimo itakos klupdymo virs kritines ribos poslinkiams priklausomai nuo asines jegos poveikio analize. |
Dolecek, V.; Isic, S.; Voloder, A. |
Report |
Jul 1, 2009 |
2640 |
| Regulation of guyed mast stresses/Plieniniu stiebu irazu reguliavimas. |
Jatulis, Donatas; Juozapaitis, Algirdas |
Report |
Jun 1, 2009 |
3043 |
| On the physically non-linear analysis of cyclic loaded reinforces concrete cross-sections with mathematical optimisation/ Apie cikliskai apkrautu gelzbetoniniu skerspjuviu fizinio netiesiskumo analize taikant matematini optimizavima. |
Raue, Erich; Timmler, Hans-Georg; Garke, Robert |
Report |
Jun 1, 2009 |
3710 |
| Method for a direct calculation of stress-strain state parameters at normal right-angled sections of structural members given curvilinear stress diagrams/Metodas strypiniu staciakampio skerspjuvio elementu itempiu-deformaciju buvio parametrams statmenuose pjuviuose tiesiogiai apskaiciuoti pagal kreivines itempiu diagramas. |
Zidonis, I. |
Report |
May 1, 2009 |
2882 |
| Estimation of stresses at knuckle of variable thickness in torispherical heads. |
Kanagasabapathy, H.; Chockalingam, K.S.K. |
Report |
May 1, 2009 |
5539 |
| Static and dynamic analysis of asymmetric bevel gears using finite element method. |
Saravanan, N.; Siddabattuni, V.N.S. Kumar; Ramachandran, K.I. |
Report |
May 1, 2009 |
4141 |
| Dynamic stability analysis of a quadruped robotic manipulator system: analytical approach. |
Purushotham, A.; Rao, G. Venkata |
Report |
May 1, 2009 |
2904 |
| Effect of slenderness on fibre reinforced polymer wrapped reinforced concrete columns. |
Nagaradjane, V.; Raghunath, P.N.; Suguna, K. |
Report |
Apr 1, 2009 |
4446 |
| A new approach for the determination of onset of failure points during laboratory strength testing of rocks. |
Mamurekli, Deniz |
Report |
Apr 1, 2009 |
4976 |
| Predicting nonlinear behavior and stress-strain relationship of rectangular confined reinforced concrete columns with ANSYS. |
Tavio, T.; Tata, A. |
Report |
Mar 1, 2009 |
4214 |
| Hilltop buckling as the A and [OMEGA] in sensitivity analysis of the initial postbuckling behavior of elastic structures/Aukstesnysis klupumas, kaip A ir [OMEGA] tampriuju konstrukciju elgsenos uz pradinio klupumo ribos jautrumo analizeje. |
Mang, Herbert A.; Jia, Xin; Hoefinger, Gerhard |
Report |
Mar 1, 2009 |
6518 |
| The stress state in two-layer hollow cylindrical bars. |
Partaukas, N.; Bareisis, J. |
Report |
Jan 1, 2009 |
5416 |
| Application of digital image correlation for measuring E modulus of wood beams. |
Dudescu, Cristian; Botean, Adrian; Hardau, Mihail |
Report |
Jan 1, 2009 |
1177 |
| Combined study on mechanical behavior of scroller shafts. |
Rusu-Casandra, Aurelia; Iliescu, Nicolae; Baciu, Florin |
Report |
Jan 1, 2009 |
883 |
| Flexural tests of the composite materials reinforced with both glass woven fabric and oak wood flour. |
Cerbu, Camelia |
Report |
Jan 1, 2009 |
1543 |
| Experimental stand for determing fabric compresability during sewing processes. |
Ionescu, Irina; Loghin, Maria Carmen; Hanganu, Lucian Constantin; Grigoras, Stefan; Stirbu, Cristel |
Report |
Jan 1, 2009 |
1140 |
| Comparison of three-dimensional finite element and photoelastic results for a scroller shaft. |
Rusu-Casandra, Aurelia; Iliescu, Nicolae; Baciu, Florin |
Report |
Jan 1, 2009 |
938 |
| Numerical analisys of discontinuities in beam structures. |
Stan, Florina; Grozea, Marius-Alexandru; Dobrescu, Corina; Hadar, Anton; Constantinescu, Ioan |
Report |
Jan 1, 2009 |
1110 |
| Internal stress in superficial layers on carbon steels. |
Barhalescu, Mihaela; Oanta, Emil; Sabau, Adrian; Dumitrache, Constantin |
Report |
Jan 1, 2009 |
1593 |
| A comparative study of severe plastic deformation techniques by finite element analysis. |
Comaneci, Radu |
Report |
Jan 1, 2009 |
1141 |
| Study of a composite sandwich-beam with an uniform load. |
Paunescu, Daniela; Suciu, Mihaela; Hancu, Liana; Suciu, Liviu |
Report |
Jan 1, 2009 |
1188 |
| The experimental investigations of residual stresses in tube with thick walls. |
Atanasiu, Costica; Vlasceanu, Daniel; Tripa, Pavel; Rosca, Valcu; Proca, Victor |
Report |
Jan 1, 2009 |
1448 |
| Photoelastic determination state of stresses at a block with two crossing cylindrical canals. |
Fratila, Marcu |
Report |
Jan 1, 2009 |
798 |
| Testing Charpy impact strength of polymeric materials. |
Nita, Alexandra; Opran, Constantin |
Report |
Jan 1, 2009 |
1285 |
| Correlation between mass loss on cavitation erosion and fatigue stress for a martensitic stainless steel. |
Voda, Mircea; Bordeasu, Ilare |
Report |
Jan 1, 2009 |
1263 |
| A finite element simulation to longitudinal impact waves in elastic rods. |
Elkaranshawy, Hesham A.; Bajaba, Nasser S. |
Report |
Jun 1, 2008 |
3784 |
| Computing the stress concentration factor in bolted joint using FEM. |
Muhammad-Tandur, K.H.; Magami, Irfan Anjum |
Report |
Mar 1, 2008 |
5602 |
| Finite element analysis of prestressed concrete beams considering realistic cable profile. |
Akhtar, Saleem; Pathak, K.K.; Bhadauria, S.S.; Ramakrishnan, N. |
Report |
Jan 1, 2008 |
3335 |
| Acoustic emissions related to the dehydration stress behavior of green Norway spruce wood. |
Rosner, Sabine; Karlsson, Bo; Konnerth, Johannes; Hansmann, Christian |
Report |
Jan 1, 2008 |
3145 |
| Identification of damage initiation and development in textile composite materials using acoustic emission. |
Ivanov, D.S.; Lomov, S.V.; Verpoest, I.; Wevers, M. |
Report |
Jan 1, 2008 |
3084 |
| Process-induced long-term deformation behavior of semicrystalline PBT*. |
Banik, K.; Mennig, G. |
|
Jul 1, 2006 |
4007 |
| Strength of mining and building equipment materials subjected to gigacycle loading. |
Leonavicius, Mindaugas Kazimieras; Petraitis, Gediminas; Suksta, Marijonas; Svalbonas, Vytas |
|
Apr 1, 2006 |
4446 |
| Elastic-plastic fracture analysis of structural columns. |
Zergua, Abdesselam; Naimi, Mohamed |
|
Apr 1, 2006 |
3390 |
| Effect of the compatibility on toughness of injection-molded polypropylene blended with EPR and SEBS. |
Matsuda, Yushi; Hara, Masao; Mano, Tsuyoshi; Okamoto, Kenzo; Ishikawa, Masaru |
|
Jan 1, 2006 |
4046 |
| Effect of mechanical stretch on cardiac fibroblast proliferation. |
Liu, Jialiu |
Brief article |
Jan 1, 2005 |
195 |
| Finite volume method analysis of large strain elasto-plastic deformation. |
Bijelonja, I. |
Technical report |
Jan 1, 2005 |
1411 |
| Residual stress within injection process. |
Halaska, P.; Manas, M. |
Technical report |
Jan 1, 2005 |
1433 |
| A new proposal for the calculation of the HCR-gears load capacity. |
Lovrin, N.; Krizan, B. |
Report |
Jan 1, 2005 |
1236 |
| Development of conical probe for stress measurement by borehole overcoring method. |
Stas, Lubomir; Knejzlik, Jaromir; Rambousky, Zdenek |
Report |
Oct 1, 2004 |
2317 |
| Variations of stress in pelvic bone during normal walking, considering all active muscles. |
Majumder, S.; Roychowdhury, A.; Pal, S. |
|
Jan 1, 2004 |
1933 |
| Gross melt fracture of polyethylene. I: A criterion based on tensile stress. |
Kim, Seungoh; Dealy, John M. |
|
Mar 1, 2002 |
5381 |
| Tools for multiaxial validation of behavior laws chosen for modeling hyper-elasticity of rubber-like materials. |
Chevalier, L.; Marco, Y. |
|
Feb 1, 2002 |
6241 |
| Structure and mechanical properties of blends of an amorphous polyamide and a liquid crystalline polymer. |
Garcia, M.; Eguiazabal, J.I.; Nazabal, J. |
|
Feb 1, 2002 |
5166 |
| Stress-Initiated Void Formation During Cure of a Three-Dimensionally Constrained Thermoset Resin. |
EOM, YONGSUNG; BOOGH, LOUIS; MICHAUD, VERONIQUE; SUNDERLAND, PAUL; MANSON, JAN-ANDERS |
|
Mar 1, 2001 |
6812 |
| Elastomer Biaxial Characterization Using Bubble Inflation Technique. I: Experimental Investigations. |
REUGE, N.; SCHMIDT, F. M.; MAOULT, Y. LE; RACHIK, M.; ABBE, F. |
|
Mar 1, 2001 |
3270 |
| Elastomer Biaxial Characterization Using Bubble Inflation Technique. II: Numerical Investigation of Some Constitutive Models. |
RACHIK, M.; SCHMIDT, F.; REUGE, N.; MAOULT, Y. LE; ABBE, F. |
|
Mar 1, 2001 |
3754 |
| Effect of Poly(acrylic acid)-g-PCL Microstructure on the Mechanical Properties of Starch/PCL Blend Compatibilized With Poly(acrylic acid)-g-PCL. |
KIM, CHANG-HYEON; CHO, KUK YOUNG; PARK, JUNG-KI |
|
Mar 1, 2001 |
4927 |
| Biaxial Stress Relaxation of High Impact Polystyrene (HIPS) Above the Glass Transition Temperature. |
HUMMEL, SCOTT R.; HOSSAIN, KISHWAR; HAYES, GREGORY T. |
|
Mar 1, 2001 |
4289 |
| NIST MEASURES THE ELASTIC PROPERTIES OF THIN FILMS WITH ULTRASOUND. |
|
Brief Article |
Sep 1, 2000 |
275 |
| Measurement of Cohesive Zone Parameters in Tough Polyethylene. |
PANDYA, K. C.; WILLIAMS, J. G. |
|
Aug 1, 2000 |
5462 |
| The Effect of Strain Rate, Temperature, and Molecular Mass on the Tensile Deformation of Polyethylene. |
HILLMANSEN, S.; HOBEIKA, S.; HAWARD, R.N.; LEEVERS, P.S. |
|
Feb 1, 2000 |
3953 |
| Dynamic Slip and Nonlinear Viscoelasticity. |
LAN, SEON KEAT; GIACOMIN, A. JEFFREY; DING, FAN |
|
Feb 1, 2000 |
5930 |
| A Mechanism for Extrusion Instabilities in Polymer Melts. |
FYRILLAS, M.; GEORGIOU, G.; VLASSOPOULOS, D.; HATZIKIRIAKOS, S. |
Brief Article |
Dec 1, 1999 |
3301 |
| Constitutive Relations for Compressible Glassy Polymers. |
DROZDOV, ALEKSEY D. |
|
Nov 1, 1999 |
5144 |
| Measuring the effect of rubber on the road. |
DeGaspari, John |
|
Oct 1, 1999 |
431 |
| Residual Stress Development in a Bi-Layer Coating. |
Yan, Gu; White, J. R. |
|
Oct 1, 1999 |
5222 |
| Residual Stresses in Marine Coatings Under Simulated Service Conditions. |
Yan, G; White, J.R. |
|
Oct 1, 1999 |
5341 |
| Comparison of Residual Stress Predictions and Measurements Using Excimer Laser Layer Removal. |
Jansen, K. M. B.; Orij, J. J. W.; Meijer, C. Z.; Van Dijk, D. J. |
|
Oct 1, 1999 |
5305 |
| The role of numerical stress analysis in failure analysis of a medical device. |
Chen, Y.; Agarwal, B.D.; So, Paul K. |
|
May 1, 1999 |
1220 |
| How to measure stress in transparent plastics. |
Hoffman, Barbara R. |
|
Nov 1, 1998 |
1504 |
| Environmental stress cracking resistance of blends of high-density polyethylene with other polyethylenes. |
Schellenberg, J.; Fienhold, G. |
|
Sep 1, 1998 |
3703 |
| Effects of pressure sensitivity and notch geometry on notch-tip fields. |
Al-Abduljabbar, A.; Pan, J. |
|
Jul 1, 1998 |
4075 |
