Printer Friendly

Static application of chemicals best for cleaning biofilms.

Preventing contamination of ready-to-eat meat products infected by L. monocytogenes continues to present a challenge to the industry. The pathogen is able to enter a processing plant along with raw product, equipment or personnel, and then it can grow on wet surfaces within a biofilm.

This biofilm contains product residues and microbial polymers that protect the embedded pathogen from being disinfected. Biofilms that form in meat processing facilities are particularly difficult to control because they usually contain fats and proteins that impede the effectiveness of any cleaners and sanitizers that you may use.

Using cleaning and sanitizing agents is difficult because we must not produce aerosols that in themselves could spread the pathogens throughout the facility. One solution is to apply these agents under static conditions without using water sprays or hand scrubbing. The agents could be applied as foams or viscous liquids and then rinsed off the surface of equipment.

Scientists at the University of Georgia evaluated the efficacy of cleaning and sanitizing agents applied to biofilms under static conditions. They evaluated alkaline and neutral pH cleaning compounds, sodium hypochlorite and a variety of other agents. They tested the chemicals against biofilms that contained chicken protein, chicken fat and L. monocytogenes on a stainless steel surface.

Cleaning agents were evaluated for their ability to remove poultry soil and biofilm material; and sanitizing agents for their ability to inactivate Listeria before and after cleaning agents were applied in the presence and absence of chicken protein and fat. Researchers prepared biofilms by growing L. monocytogenes on stainless steel and coating them with chicken serum albumin and rendered chicken fat. An alkaline cleaning agent removed 99% of fat and 93% of protein within a 30-minute exposure.

A neutral pH cleaning agent was just as effective at removing fat, but it removed only 77% of protein. The alkaline agent also effectively removed L. monocytogenes biofilm coated with protein, decreasing cell numbers on the surface after a 10-minute exposure.

Acidified sodium chlorite and a peracetic acid-octanoic acid mixture were the most effective sanitizers at killing L. monocytogenes in biofilm coated with fat and protein. Both achieved more than a 5-log reduction in numbers within 1 minute. Using an alkaline cleaner for 10 minutes followed by acidifed sodium chlorite for 30 minutes reduced populations of the bacteria to nearly undetectable levels.

Further information. Michael Doyle, Center for Food Safety, University of Georgia, Griffin Campus, Griffin, GA 30223; phone: 770-228-7284; fax: 770-229-3216; email: mdoyle@cfs.griffin.peachnet.edu.
COPYRIGHT 2003 Food Technology Intelligence, Inc.
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2003, Gale Group. All rights reserved. Gale Group is a Thomson Corporation Company.

Article Details
Printer friendly Cite/link Email Feedback
Publication:Microbial Update International
Date:Feb 1, 2003
Words:412
Previous Article:Steam pasteurization lessens the risk of ready-to-eat meats.
Next Article:Technique reveals distinct E. coli O157:H7 populations.


Related Articles
The bugs of rust; researchers are trying to tease out how microorganisms influence the corrosion of metals.
Study how biofilms attach to surfaces.
Sticky Situations.
Chronic suppurative otitis media: A clinical overview.
Control the growth of biofilms.
Control the growth of biofilms.
Model the heat inactivation of L. monocytogenes in biofilms.
Unhealthy change: diversity in a bacterial colony can prolong infections.
Models predict the heat inactivation of L. monocytogenes in biofilms.

Terms of use | Copyright © 2018 Farlex, Inc. | Feedback | For webmasters