Sometimes you just gotta take over.
I have a '68 Chevy pickup that I love and want to keep running for as long as I can. I live on a farm, but I only use it when I have to go to Home Depot to pick up duct tape -- it's a great "old dude'' magnet! The truck starts and runs beautifully, but the last time I started it, it began to sputter and die. I opened the hood and, to my horror, saw that the carburetor was spewing gas. I immediately called the mechanic who lives down the road, and asked him if he would look at it. Unfortunately, he had just successfully retired after many previous attempts, and he held firm even when I offered to rebuild the carburetor myself under his tutelage. However, he did give me a tip that works like a charm: He told me to tap it lightly with a hammer, because the needle valve gets stuck. Sure enough, it worked, but I'm concerned that it might happen while I'm driving and the gas might ignite on the hot manifold.Would you say this is a good fix? -- HALI THE LIBRARIAN
TOM: It's getting harder and harder to find guys who've actually worked on carburetors, Hali. It's harder than finding a guy to change the goat-skin membrane in my ear horn.
RAY: It sounds like your carburetor is flooding and liquid gas is coming out the vents.
TOM: Your instincts are correct: That's not a great long-term situation, and you're right to look for a more permanent fix.
RAY: But since you can't get help rebuilding your carburetor, I'm going to suggest that you try to replace it.
TOM: Go online, and see if you can find an already-rebuilt carburetor for your 1968 Chevy truck. Ideally, you'll find a remanufactured one for a few hundred bucks that will be just as good as new. And if you were game to rebuild the carburetor, swapping it out is even easier.
RAY: You simply disconnect the linkage and the fuel line, which is no big deal. Then you unscrew about four nuts that bolt down the carburetor, and you're done.
TOM: Well, you're done when you successfully put those four nuts back in, along with the new carburetor, then reattach everything and see if the truck starts. But it's a pretty simple job, and you sound like you're up for it.
RAY: A nice trick nowadays is to set up your smart phone and record yourself removing the old carburetor. That way, when you have two or three parts left over, you can go back and watch it, and see where they came from.