Printer Friendly

Solid Terrain Modeling Unveils Spectacular 40-Foot by 74-Foot, Three-Dimensional, Full-Color Model of Entire Province of British Columbia.

FILLMORE, Calif. & VICTORIA, British Columbia -- World's Largest Physical Terrain Model is Centerpiece of New "BC Experience" Geographic Discovery Center in Victoria's Historic Crystal Garden

Solid Terrain Modeling (STM), (, manufacturer of the world's most accurate three-dimensional solid-terrain models, unveiled a stunning new model of the entire province of British Columbia (BC) at the historic Crystal Garden in Victoria, British Columbia today. The three-dimensional, full-color model is 40-feet by 74-feet, larger than a "doubles" tennis court, and is the world's largest physical-terrain model ever created from digital-data sources. The model can be viewed from many levels and allows visitors to see British Columbia as it actually appears from outer space, with every geographic feature in vivid color and exquisite detail.

The model is the centerpiece of the new "BC Experience" geographic discovery center, and is located under the beautiful glass-and-iron canopy of the Crystal Garden. The BC Experience ( allows visitors to navigate through the physical and cultural wonder that is British Columbia. The Grand Opening for the BC Experience will be held on Monday, June 26.


The BC model is a literal transcription of the best geophysical data that modern science can provide today and offers visitors the unique opportunity to see how our planet looks from space.

The most remarkable feature is its accurate representation of the curvature of the Earth. Because of this curvature, viewers on lower levels see the great arc of the horizon rather than the ends of the model.

In order to appreciate both the "big picture" and the exquisite details included in the model, visitors can view it from various levels and locations to take in all of the natural splendor of British Columbia - the beautiful mountain ranges, the wide valleys, the penetrating fjords, the mighty rivers and their tributaries, the blue lakes and the green islands - all in vivid color. They can even see the contours of the ocean floor beneath the coastal waters. Evidence of glaciers, earthquake-prone fault lines, agriculture, forestry, cities and even roads can be seen clearly.

To augment the information provided by the model, fourteen flat-screen electronic GeoStations are mounted on balcony railings surrounding the model. The touch-screen GeoStations provide visitors with instant access to in-depth geographic information on scores of locations in British Columbia.


Consisting of 100 separate curved panels, the model was created from digital elevation and imagery data obtained from Earth-orbiting satellites. Using the elevation data, the panels were carved from high-density foam by STM's highly calibrated custom cutting machines. The completed panels were spray coated white and then, using the imagery data, an image of the geographic area was applied directly onto the surface of each panel by STM's unique printing machine. Because each panel was individually shaped to accurately represent the curvature of the Earth, no two panels are the same shape. The finished panels were assembled onsite and installed over an intricate steel grid that includes individual supports for each panel. These supports allow each panel to be adjusted so that it fits perfectly with the adjacent panels.


The BC model is unique in both size and shape. It was manufactured from than 260 Million elevation data points and is covered by more than 100 Billion droplets of ink. At a scale of 1:99,000, the terrain on the model surface is vertically exaggerated by 50 percent while the curvature is an accurate one-to-one representation of the Earth. This model represents approximately 1/190th or 0.52% of the Earth's surface.

The model's 100 panels are arranged in a 10-by-10 array with each panel having a unique shape. The overall shape of the model is defined by a section of a sphere that is divided into panels along "great circle" lines. A "great circle" is a cartographic concept that provides the shortest distance between two points, and is defined as the intersection of a plane that passes through two points on the surface of the sphere and the center of the sphere.

Each panel of the model was "cut" along the great circle lines created by planes that pass through the center of the sphere and the corner points of each panel. The result is that the panels fit together almost seamlessly and any visible seams between panels appear as long, smooth curves when viewed from above, with the long edges providing the most pronounced effect.

The source data for the model was processed by WorldSat International and is of two distinct types: a digital elevation model (DEM) which provides height measurements on the surface of the Earth, above or below sea-level, at regular intervals of about 90 meters; and satellite photographs collected by the U.S. Geological Survey's LandSAT 7 sensor. The LandSAT imagery was mosaiced (stitched together) and color balanced by Robert Stacey of WorldSat. Once the master files for elevation and color were completed, they were cut into 100 sections and re-projected from the standard system of latitude/longitude into 100 panel-specific coordinate systems that combine the differential horizontal and vertical scaling factors along with the curvature of the Earth.


Lawrence Faulkner and Mark Fisher spent 10 years developing a revolutionary, patent-pending technology to produce the world's most accurate, full-color, 3D solid models of geographic terrain. In August 2000, they founded Solid Terrain Modeling Inc. to bring their spectacular models to the marketplace.

To produce a model, STM uses digital elevation and imagery data obtained from Earth-orbiting satellites or from airborne sensors for the selected geographic area. The elevation data controls STM's highly calibrated cutting machine as it carves the model into high-density plastic foam. Then imagery data controls STM's huge printing machine as it applies the image directly onto the model's surface. (Other images, such as maps, photos, graphics, and text can also be printed on a model.) The result is an exact replica of the geographic area, in breathtaking detail and in brilliant color.

STM models are used by law firms, emergency response groups (fire, police, search and rescue), land management offices (construction, civil engineering, real estate, and recreation), developers, transportation agencies, utilities (oil, gas, hydro), architects, museums, military, government agencies (federal, state and municipal), the U.S. Department of Defense and others.

Solid Terrain Modeling is located at 340 Fillmore St., Fillmore, CA 93015. Phone is: 805-524-7307. Fax is: 805-524-1973. Web site is:

MEDIA NOTE: High-resolution photos of this model are available from press contacts listed below or at Place cursor on "Press Room" and click on "Press Releases." Other STM models may be viewed by clicking on "Gallery of STM Models."
COPYRIGHT 2006 Business Wire
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2006, Gale Group. All rights reserved. Gale Group is a Thomson Corporation Company.

Article Details
Printer friendly Cite/link Email Feedback
Publication:Business Wire
Date:Jun 23, 2006
Previous Article:Award Winners of Ernst & Young Entrepreneur Of The Year(R) Award Announced in Central Midwest Region.
Next Article:Look! Up in the Sky! ``S'' Stands for Superman Coming Back to the Big Screen.

Related Articles
Trophy homes auction planned for September 16th.
Items of Interest.
ArcView Users Can Do 3D.
Polyhedron Man: spreading the word about the wonders of crystal-like geometric forms.
Steinway and Boston piano offering new and reintroduced grands.
Trump and Cappelli unveil newest tower.

Terms of use | Privacy policy | Copyright © 2019 Farlex, Inc. | Feedback | For webmasters