Printer Friendly

Soil wet enough? Gypsum blocks will tell you.

Soil wet enough? Gypsum blocks will tell you New technology has made an old tool for measuring soil moisture--the gypsum-block moisture sensor--more reliable than it used to be. And now these sensors are available to home gardeners at prices that make them an attractive alternative to more expensive types of moisture sensing devices for use on deep-rooted landscape plants. For about $250 you can monitor soil moisture levels at up to 10 different locations in your garden.

Gypsum blocks, which have been around for about 60 years, are simply marshmallow-like plaster of Paris cylinders that contain two electrodes. The blocks absorb water much the way oil does. As the blocks become wetter or drier, electrical charges between the electrodes, which connect by wire to a simple meter, change accordingly.

By burying the blocks at various depths in a plant's root zone, you can not only gauge the soil's moisture content, but also tell how deep you are watering with each irrigation. One type of gypsum block can now even be hooked up to run an automatic sprinkler system.

Where to install gypsum blocks

As with other moisture sensors, it's best to put gypsum blocks in several different microclimates or soil types around your yard. For instance, you might place one set of two or three (depending on the depth of the roots) in soil on the sunny south side of the house, another set on the shady north side, and so on.

To make a hole in the ground for the blocks, you can use either an auger or core sampler (see picture abovee, or bore a hole with a sharp metal bar. The most important step is to make sure the soil put back in the hole is in good contact with the block. Wait 24 hours to get an accurate reading.

Although most gypsum blocks gradually break down and read zero after several years, they are inexpensive to replace. One newer type has a protective cover that prevents breakdown.

Where to buy gypsum blocks

Three companies are the main suppliers of gypsum blocks and related equipment in the West. Each provides excellent instructions. You need only one meter to read any number of blocks. Blocks cost $6 to $16 each, meters $100 to $270.

Irrometer Company, Inc. (Box 2424, Riverside, Calif. 92516) offers blocks enclosed in a protective cover to prevent degradation. They can also be used to control automatic irrigation systems at a price of about $75 per valve.

Soilmoisture Equipment Corp. (Box 30025, Santa Barbara, Calif. 93105) sells a smaller block for a narrower hole.

Supersensors (140 University Ave., Suite 131, Palo Alto, Calif. 94303) offers basic gypsum blocks and a meter, along with directions for making a simple PVC core sampler for installation.
COPYRIGHT 1990 Sunset Publishing Corp.
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 1990 Gale, Cengage Learning. All rights reserved.

Article Details
Printer friendly Cite/link Email Feedback
Publication:Sunset
Article Type:Directory
Date:Aug 1, 1990
Words:458
Previous Article:Lemon grass lemonade ... and other fragrant refreshments.
Next Article:Exploring mountain nurseries around north Tahoe.
Topics:


Related Articles
How to water wisely and well.
GARDENING\Gypsum can make harsh Valley soil fruitful.
Effect of [CaSO.sub.4] (Gypsum) on cotton lint yields, soil fertility, and physical soil properties of heavy clay soils in Missouri.
Assessment of the application of percolation theory to a water repellent soil.
Effects of surfactant treatments on the wettability of a water repellent grass-covered dune sand.
Application of two amendments (gypsum and langbeinite) to reclaim sodic soil using sodic irrigation water.
Effect of soil wetting conditions on seal formation, runoff, and soil loss in arid and semiarid soils--a review.
Deriving point and parametric pedotransfer functions of some gypsiferous soils.

Terms of use | Privacy policy | Copyright © 2018 Farlex, Inc. | Feedback | For webmasters