Printer Friendly

Sessions: current as of 2/20/05.

HOYT MEMORIAL LECTURE

Tuesday, April 19, 2005

10:15 AM

Hoyt Memorial Lecture: Elements Of Quality Leadership (05-196)

ALUMINUM

Saturday, April 16, 2005

3:45 PM

Effect Of Artificial Cooling On The Metallurgical Quality Of Al-Si-Mg Investment Castings (05-006)

Effect Of Gating Design On Mold Filling (05-152)

AFS Research Report: The Effects Of Thermocouple Placement On Highly Transient Temperature Measurements In Mold Media For Aluminum Castings (05-194)

Sunday, April 17, 2005

8:30 AM

Molten Metal Treatment Workshop #1 (05-268)

The Treatment And Processing Of Molten Aluminum Before Making Castings

10:15 AM

Molten Metal Treatment Workshop #2 (05-269)

The Treatment And Processing Of Molten Aluminum Before Making Castings

2:00 PM

An Experimental Method To Measure The Transient Air-gap Between Cast And Permanent Mould During Casting Solidification (05-069)

The Influence Of Coatings On Fluidity Of AlSi7Mg In Low Pressure Die-casting (05-119)

Modeling Solidification Of A Hubcap Casting In Gravity Permanent Mold Casting Process (05-189)

3:45 PM

Panel: Innovative Methods For Heat Treating Aluminum Castings (05-208)

Monday, April 18, 2005

8:30 AM

Panel: Inclusions In Aluminum Foundry Processes (05-225)

10:15 AM

Silver Anniversary: Technology, Characteristics And Applications Of The Electromagnetic Metal Pump (05-237)

2:00 PM

Panel: Hot Isostatic Pressing Of Aluminum Castings (05-216)

3:45 PM

Eutectic Morphology And Porosity In Unmodified And Strontium-modified Al-Si Alloys (05-067)

Embedding 'Wrought' Microstructure In A Cast Component: A Novel Application Of Friction Stir Processing (05-086)

Mechanisms Of Formation And Chemical Modification Of The Morphology Of The Eutectic Phases In Hypoeutectic Aluminum-Silicon Alloys (05-088)

Tuesday, April 19, 2005

8:30 AM

AFS Research Report: Enabling Technology For The Design Of Short-fiber Reinforced Aluminum MMC Components (05-147)

Inclusion Additions To Molten Aluminum Alloys Using The Gas Injection Technique: Process And Analysis (05-179)

A New Device For The Determination Of Hydrogen Concentrations In Aluminium Alloys (05-215)

CAST IRON

Saturday, April 16, 2005

2:00 PM

Panel: Money Saving Ideas/Problems Solved--Charge Materials (05-222)

Lean Manufacturing Cost Reduction Goals Achieved Through Direct Pouring (05-077)

3:45 PM

On The Relationship Between Tensile Properties And Matrix Microstructure In Austempered Gray Iron (05-145)

Aluminum Cast Irons: Solidification, Feeding And Oxygen Activities (05-149)

Carbon Dissolution In Cast Iron Melts Re-examined (05-168)

Sunday, April 2005

8:30 AM

Panel: Statistics--Powerful Tool For Solving Foundry Problems (05-221)

Computer-aided Graphite Classification - An Approach For International Standardization (05-070)

10:15 AM

Panel: Cast Iron Process Simulation (05-207)

2:00 PM

Panel: Defects In Ductile Iron Castings (05-227)

3:45 PM

Panel: The North American Foundry In The Worldwide Marketplace. The Technical, Economic, And Operating Considerations (05-236)

Monday, April 18, 2005

10:15 AM

Honorary Lecture: Education Or Death--It's Your Choice (05-248)

2:00 PM

Machinable ADI In Italy (05-209)

Effects Of Titanium And Filtration On Gray Iron Machinability (05-199)

Optimizing The Mechanical Properties Of Thin Wall Ductile Iron Castings: Effect Of Cooling Rate, Inoculation And Silicon Content (05-116)

3:45 PM

Panel: Ductile Iron Wind Mill Castings (05-228)

Tuesday, April 19, 2005

8:30 AM

Wear Properties Of Austempered Ductile Cast Irons (05-187)

Gray Iron Property Measurements Using Ultrasonic Techniques (05-122)

Evaluation Of Fatigue Strengths Of Continuous Cast 80-55-06 Ductile Iron (05-139)

COPPER ALLOY

Saturday, April 16, 2005

10:15 AM

Panel: Availability And Prices Of Copper Alloy Metals And Scrap, A Historical And Future Perspective (05-239)

2:00 PM

Panel: NSF Standard 61-A Review Of The Standard And Of The Various Methods To Meet The Standard (05-238)

Sunday, April 17, 2005

10:15 AM

Development Of Lead-free Copper-nickel Alloys For Food Processing Applictations (05-137)

AFS Research Report: Development Of A Permanent Mold To Produce Tensile Test Bars To Evaluate The Quality Of Copper Base Alloy Melts (05-161)

Mechanical Properties, Castability And Machinability Of Newly Developed Lead Free Copper Alloy Castings (05-169)

DIE CASTING

COMPUTER MODELING

Sunday, April 17, 2005

8:30 AM

Modeling Influence Of The Die Casting Machine Components On Contact Pressure Between Dies And Platens (T05-011)

Recent Advancements On Porosity Simulation In High Pressure Die Casting (T05-012)

Effect Of Die, Cavity And Toggle Locations On Tie Bar Forces And Parting Plane Separation (T05-013)

PROCESS CONTROL

Measurement Of Heat Flux During Lubricant Application For The Die Casting Process (T05-022) Reducing Gas Porosity In High Pressure Die Castings (T05-023)

10:15 AM

COMPUTER MODELING

Optimization Of Gating, Venting And Cooling Of Die Casting Dies Through Numerical Simulation Of Mould Filling And Solidification (T05-031)

Prediction And Validation Of Distortion And Residual Stresses In An Aluminum High Pressure Die Casting With Considerations To The Die Casting Process Related Variables (T05-032)

Modeling Dynamic Cavity Pressure And Impact Spike In Die Casting (T05-033)

DIE MATERIALS

The Effect Of Cooling Rate From The Austenitizing Temperature On The Thermal Fatigue Cracking, Microstructure And Impact Resistance Of H13 Die Material (T05-041)

High Pressure Die Casting Dies: Application Results From The Field (T05-042)

Development of Steels for Die Casting Dies (T05-043)

2:00 PM

Design Methodology For Optimized Die Coatings Used In Aluminum Pressure Die Casting (T05-051)

Improved Die Casting Process To Preserve The Life Of The Die Casting Die (T05-052)

RSP Tooling Case Studies (T05-053)

MELTING & THERMAL PROCESSING

Solution Heat Treatment Of Vacuum High Pressure Die Cast Aluminum Alloy A380 (T05-061)

Further Evaluation Of A High Performance Continuous Melting & Holding Crucible Furnace System (T05-062)

Effect Of Artificial Aging On Microstructure And Mechanical Properties Of Semi-solid Processed A356 Castings (T05-063)

Monday, April 18, 2005

8:30 AM

ADVANCED TECHNOLOGIES

Revolution[TM] 2-Platen Die Casting Equipment Technology (T05-071)

Energy Efficiency Of Aluminum Melting

Furnaces In Die Casting Operations (T05-072)

An Innovative Device for Vacuum and Air Venting (T05-073)

CAST MATERIALS

Reduction Of Magnesium Die Casting Crack

Defects Through Process Control (T05-081)

An Experimental Die For Measuring Castability Of Die Casting Alloys (T05-082)

Strength of Salt Core for Die Casting (T05-083)

10:15 AM

Impact Properties Of Zinc Die Cast Alloys (T05-091)

Evaluation Of Corrosion Tests For Zinc Die Casting Surface Finishes (T05-092)

Castasil[TM]-37, The New HPDC-alloy For Ductile Castings (T05-093)

COMPUTER MODELING

Evaluation And Application Of An Alternative Die Material Using Simulation Technology For The High Pressure Die Casting Industry (T05-101)

Design Support For Tooling Optimization (T05-102) Numerical Simulation Of Copper Rotor Die Casting With Validation Using X-Ray Computed Tomography (T05-103)

2:00 PM

CAST MATERIALS

The Effect Of Casting Wall Thickness On The Tensile And Axial Fatigue Properties Of ADC12 Alloy Die Castings (T05-111)

High Pressure Die Cast Aluminium Telecommunications Components (T05-112)

A Study Of Externally Solidified Products In The Cold Chamber Die Casting Process (T05-113)

PROCESS ENGINEERING

Evaluation And Application Of Thermal-Oil/ Die Heat Transfer Coefficients In Thermal Simulation (T05-121)

The Systems Approach To Aluminum Die Casting (T05-122)

Real Time Die Deflection Measurement (T05-123)

3:45 PM

Porosity Management Through Impregnation, And Its Opportunities (T05-131)

Thermal Analysis Of A Die Cooling System (T05-132)

New Die Release Products For The Global Die Casting Industry (T05-133)

SEMI-SOLID METAL

The Continuous Rheoconversion Process (Crp): Modeling And Optimization (T05-141)

Atmcasting A Revolutionary Technique To Produce In SiTu Light Metal SSM Castings (1'05-142)

Optimization Of A380 Alloy For Semi-solid Processing (T05-143)

Tuesday, April 19, 2005

8:30 AM

PROCESS ENGINEERING

Lean Manufacturing Techniques Applied To Aluminum Die Casting (T05-151)

Cost Reduced Magnesium (T05-152)

A Method For Developing Uniform Cavity Pressure (T05-153)

ENGINEERING/PATTERN & FOUNDRY TOOLING (Joint Session)

Sunday, April 17, 2005

8:30 AM

Panel: Collaborative Design (05-247)

ENGINEERING

Sunday, April 17, 2005

10:15 AM

The Balanced Scorecard Approach To Management Communications (05-136)

Management Purpose And Audit System Design (05-151)

Case Study: Process Definitions; Process Measuring: How Does A Small Foundry Get Their ROI OFF ISO/TS 16949:2002? (05-176)

2:00 PM

Panel: Lean Cost Analysis And Project Management (05-246)

Monday, April 18, 2005

8:30 AM

Value Of Virtual Casting Technology In Real Casting Problem Solving For Automotive Components (05-068)

NDE Methods To Detect Oxides In A1 Cast Components (05-076)

Software For A Global Foundry Industry (05-164)

10:15 AM

Panel: The Latest Look At Robotic Casting Finishing (05-214)

ENVIRONMENTAL, HEALTH AND SAFETY/MOLDING METHODS & MATERIALS (Joint Session)

Sunday, April 17, 2005

3:45 PM

Improved Volatile Organic Compound Testing For Foundry Binder Systems (05-193)

Updates For Hazardous Air Pollutant (Hap) Emissions From Shell Sand Pouring, Cooling, And Shakeout Operations (05-188)

Core Additives: Effects On Core Strength, Casting Quality And Air Emissions (05-129)

ENVIRONMENTAL, HEALTH AND SAFETY

Monday, April 18, 2005

2:00 PM

Panel: Hot Topics In The EH&S Arena (05-244)

3:45 PM

Significant Reduction In The Emission Characteristics Of The Greensand Process. (05-125)

The Resin/C[O.sub.2] Core & Mold Making Process: Emissions Characterization (05-249)

HUMAN RESOURCES

Saturday, April 16, 2005

8:30 AM

Experiences Using Online Training (05-044)

Developing A Successful Workers' Compensation Injury Management Program (05-250)

LOST FOAM CASTING

Saturday, April 16, 2005

10:15 AM

Lost Foam Coating Characterization: Mass And Heat Transfer (05-004)

Methods For Measuring Rheological Properties Of Lost Foam Coatings (05-128)

Vibration Based Characterization Of Expanded Polystyrene Foam Patterns (05-138)

2:00 PM

A Flask And Methodology For Lost Foam Casting Under Controlled Environment (05-102)

Innovative Methods For Measuring The Uniformity Of Foam Quality (05-143)

AFS Research Report: Real Time X-Ray Visualization Of Effects Of Glue Joints On Metal Filling And Defect Formation Of Lost Foam Castings (05-173)

3:45 PM

Panel: Showcasing The Capability Of The Lost Foam Casting Process (05-233)

MAGNESIUM

8:30AM

Vacuum Assisted Lost Foam Casting Of Magnesium Alloy AZ91E (05-053)

Hot Core Distortion Studies During Magnesium Casting (05-050)

Observations On Fillability And Metal Velocity Of AZ91-E Magnesium Alloy Cast By The LFC Process (05-032)

10:15 AM

AFS Research Report: Magnesium Casting Process Development: Designing An Engine Cradle For Magnesium Semi-Permanent Mold Casting (05-217)

Design And V-Process Production Of Cast Magnesium Component (05-051)

AFS Research Report: Shrinkage Behavior Of AM50, AM60 And AZ91D (05-028)

MARKETING

Tuesday, April 19, 2005

8:30 AM

Organization, Systems And Culture (05-165)

The Golden Age Of Castings, 2005- 2050 (05-046)

The Global MetaLcasting Industry And Its Impact On The U.S. (05-240)

MELTING METHODS & MATERIALS

Saturday, April 16, 2005

8:30 AM

The Impact Of Mica Slip Plane On Large Coreless Induction Furnaces Containing Safety Backup Briquettes And A Qlr System (05-022)

Panel: Coreless 101: A Practical Introduction To Coreless Furnace Operation (05-241)

10:15 AM

Concepts For Reducing Cupola Charge Material Costs (05-212)

Panel: Cupola Operators Panel Focusing On Cupola Melt-In And Tap-Out Procedures (05-229)

2:00 PM

Lining Wear--A Mass Transport Phenomenon (05-235)

Panel: Practical Channel Furnace Concerns (05-272)

MOLDING METHODS & MATERIALS

Sunday, April 17, 2005

8:30 AM

New Core Binder System For Aluminum Casting Based On Polysaccharide (05-038)

Molding Simulation And Experiment Of New Core Making System With Polysaccharide-Based Binder (05-039)

AFS Research Report: Numerical Simulation Of The Investment Casting Process (05-160)

2:00 PM

OPERATOR'S SESSION

Optimizing Molding Parameters For Green Sand Compaction (05-008)

New Sand Filling Method In Flaskless Molding And Its Controls (05-037)

Panel: Vacuum Mixing And Cooling- A New Approach To Greensand Preparation (05-242)

Monday, April 18, 2005

8:30 AM

Silver Anniversary: Porosity In Castings (05-245)

New Developments In Ester Cured Phenolic Cold Box Binders (05-167)

2:00 PM

GM Resin Selection Process For The Precision Sand Project (05-171)

Expanded Opportunities For Precision Sand Casting Utilizing Coldbox Binders (05-045)

Improvements In Phenolic Urethane Acrylic Cold Box Binder Technology For Aluminum Casting Applications (05-074)

3:45PM

Panel: Silica Sand Expansion, A Fresh Look (05-234)

The Effect Of Refractory Coating Thermal Heat Transfer On Phenolic Urethane Cold Box Core Distortion At Iron Temperature And Pressure (05-192)

Tuesday, April 19, 2005

8:30 AM

Comparison Between Rapid Mold Making Technologies (05.007)

Feasibility Of A Capacitive-based Device For Green Sand Mold Characterization (05-172)

New Technique For Measuring Permeability Of Cores Made From various Sands, Binders, Additives, And Coatings (05-130)

MOLDING METHODS & MATERIALS/ ENVIRONMENTAL, HEALTH AND SAFETY (Joint Session)

Sunday, April 17, 2005

3:45PM

Improved Volatile Organic Compound Testing For Foundry Binder Systems (05-193)

Updates For Hazardous Air Pollutant (Hap) Emissions From Shell Sand Pouring, Cooling, And Shakeout Operations (05-188)

Core Additives: Effects On Core Strength, Casting Quality And Air Emissions (05-129)

PATTERN & FOUNDRY TOOLING

Saturday, April 16, 2005

8:30 AM

Rapid Prototyping Patterns Create New Opportunities For Investment Casting (05-156)

Metal Casting Applications Of Additive Fabrication and Rapid Prototyping, A Brief Historical Synopsis And Look At Future Opportunities (05-178)

3:45 PM

From Cad To Casting In 12 Hours (05-162) Paperless Tooling Design In 2005 (05-175)

PATTERN/ENGINEERING (Joint Session)

Sunday, April 17, 2005

8:30 AM

Panel: Collaborative Design (05-247)

STEEL

Monday, April 18, 2005

8:30 AM

Clean Steel Casting Production: Water Modeling Studies Of Bottom-Pouring Ladle Operations (05-132)

Panel: Opportunities For Steel Castings- Design And Metallurgical Issues (05-231)

10:15 AM

Foundry Size Ladle Metallurgy Vessel: Ferromanganese Dissolution (05-080)

Panel: Defect Analysis In Steel Castings (05-230)

We are pleased to host the 2005 Technical Forum of the World Foundrymen Organization. The Technical Forum will feature the presentation of 12 papers discussing the status of research, and the direction of future research, in the major metal groups. The Technical Forum will begin at 2:00 p.m. April 19, following the President's Luncheon. To register for the Technical Forum visit the CastExpo web site at www.CastExpo.com.

The WFO represents the collective needs and beliefs of the principal representatives of foundry associations of member countries. The WFO objectives are:

* Promotion of the technology of the foundry industry.

* Improving the image and understanding of the industry via the global exchange of information.

* Providing focus to all aspects of cast metals engineering,

* Promoting international co-operation between member associations and other organizations.

* Encouraging education and training for the industry.

* Promoting the technical application of research and development of cast components.
COPYRIGHT 2005 American Foundry Society, Inc.
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2005, Gale Group. All rights reserved. Gale Group is a Thomson Corporation Company.

 
Article Details
Printer friendly Cite/link Email Feedback
Title Annotation:CastExpo '05
Publication:Modern Casting
Article Type:Calendar
Date:Mar 1, 2005
Words:2263
Previous Article:CastExpo list of exhibitors.
Next Article:GMBOND, Hormel specialty Products Division.


Related Articles
CALENDAR.
CALENDAR.
CALENDAR.
BUSINESS DATEBOOK.
Question of the month.
CastExpo '05 schedule.
Calendar of events.
CastExpo '05: gateway to innovations.
CALENDAR.

Terms of use | Privacy policy | Copyright © 2018 Farlex, Inc. | Feedback | For webmasters