Printer Friendly

Roughness tester.

The Surftest SV-800 CNC surface roughness measuring machine is engineered around a column-moving mechanism that is said to virtually eliminate load capacity limitations. The machine's large measuring envelope (800 mm x 500 mm x 200 mm) and long-stroke probe arm are designed to accommodate sizeable, heavy workpieces such as crankshafts and camshafts, as well as other powertrain, engine and similar components. The long reach of the probe arm also enables the SV-800 to measure multiple cross sections and waviness over a wide range. The Surftest SV-800 is constructed to attenuate vibration and minimize measurement deviations attributable to machine deflection.

Mitutoyo America

Circle 75 on card

COPYRIGHT 2004 Lippincott & Peto, Inc.
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2004, Gale Group. All rights reserved. Gale Group is a Thomson Corporation Company.

Article Details
Printer friendly Cite/link Email Feedback
Title Annotation:Product: intruments
Publication:Rubber World
Date:Dec 22, 2004
Previous Article:Single point sensor.
Next Article:Pocket calculator.

Related Articles
Get the roll surface right: roll finishes often cost more than the roll itself. The right finish improves film or sheet quality and raises output....
Characterization of adhesion performance of topcoats and adhesion promoters on TPO substrates.
Critical Pigment Volume Concentration measurements ... a very fast method.
Slip and friction tester.
Uniformity tester.
Vibration tester.
Overblasting effects on surface properties of low-carbon steel.
Digital durometer tests rubber hardness.

Terms of use | Copyright © 2017 Farlex, Inc. | Feedback | For webmasters