Rieter creates value for customers by system competence, innovative solutions and global presence.
Rieter creates value for customers by system competence, innovative solutions, excellent after sales service and global presence. The complete range offered by Rieter enables the production of a consistent yarn quality with optimal cost effectiveness. Rieter's innovations at the ITMA 2015 include the new E 36 / E 86 combing set, the new R 66 rotor spinning machine and the J 26 air-jet spinning machine with the Polyester option P 26. In addition, Bracker, Graf, Novibra and Sussen are presenting components for the manufacture of high quality yarns.
SPIDERweb Mill Control System
The Rieter SPIDERweb Mill Control System uniformly covers the entire spinning mill from fibre to yarn and for all four spinning technologies - not only for new machines but also for older generations. SPIDERweb serves economic decisions in the spinning mill. For the first time, Rieter is showing a mobile solution that not only provides an overview of the data of the spinning mill, but also offers a configurable alarm function.
New functions of the C 70 High Performance Card
The C 70 high-performance card achieves excellent yarn quality at highest production rates for all yarn applications. Rieter controls the carding gap by means of precise flats guidance and with the working width of 1.5m achieves the largest active carding area on the market. Innovations in the pre- and post-carding zone facilitate specific waste selection and thus an excellent raw material yield and sliver quality.
New package for the processing of synthetic fibres
The new, easily removable web bridge in a special package for the processing of synthetic fibres allows trouble-free cleaning and an immediate restart of the card. The second function in the package is the unique chute control with air pressure, which simplifies the processing of synthetic fibres. This enables the C 70 card to achieve high carding performance with synthetic fibres and as a result, good running properties in spinning.
New E 36 /E 86 combing set
The new combing set achieves the greatest productivity on the market. It consists of a new combing preparation machine, E 36 OMEGAlap, which is able to feed six new E 86 combers. With 540 kg/h and therefore the supply of almost 25000 ring spindles, the set reaches the high production output on the market.
A new function simplifies setting and optimization of the noil rate. This is made possible by the new FlexComb circular comb from Graf.
New RSB-D 24 Double-head Autoleveller Draw Frame
All autoleveller draw frames from Rieter use the same dynamic autolevelling system for incomparable sliver uniformity, even at high delivery speeds of 1100 m/min.
New ECOrized suction
The ECOrized suction system on the new RSB-D 24 double-head autoleveller draw frame lowers the energy consumption. Older draw frame generations can also be retrofitted with the ECOrized suction system.
New sliver sensor
A sliver sensor, patent pending, makes a high quality in sliver coiling already possible from the first metres following a Can change.
New level of convenience
The practical setting of suction and delivery speed on the display, as well as the option of individual maintenance of the two heads, increases the level of convenience for setting and operating the machine. Together with the SB-D 22 double-head draw frame without levelling, a double-head line requires 50% less space and therefore compared with a line of single head draw frames also saves costs.
R 66 Automated Rotor Spinning Machine
The success of the R 60 automated rotor spinning machine in recent years lies in the good yarn tenacity and low yarn manufacturing costs. Contributory factors are the low energy consumption and easy operation. At the ITMA 2015 Rieter is presenting the new R 66 rotor spinning machine which makes yarn production even more economical.
New lengths of up to 700 positions per machine
A higher yarn production per square metre is obtained with longer machines. Rieter now makes a length of up to 700 spinning positions possible. The new machine length reduces the costs for the entire rotor spinning system.
New S 66 Spin Box
The new S 66 spin box is the heart of the new R 66 rotor spinning machine. Compared with the S 60, the S 66 achieves higher speeds for improved economy at the same yarn tenacity and yarn uniformity. The new replaceable CHANNELpass simplifies the optimization for different raw material.
New electro-mechanical yarn traverse for high quality packages
The new electro-mechanical yarn traverse simplifies the setting of the winding angle for a wide range of applications, for reliable package flanks and good unwinding behaviour.
Existing rotor spinning systems modernized for synthetic fibres and higher speeds
With the ANTIstatic TWINdisc, the CHANNELpass, the clip-on opening roller or complete sets for box modernization, Rieter offers solutions that allow a quick response to changed market requirements. Time and energy savings as well as production increases lead to a better return.
G 32 Ring Spinning Machine
The G 32 ring spinning machine is, like its big sister, the G 36 ring spinning machine, a guarantee for economically produced ring yarns. Now available is the revised G 32 ring spinning machine with a maximum length of 1824 spindles and with the innovative suction tube ECOrized. In addition, a quality package for improvement of the yarn quality, a flexible change between S and Z twist and a special package for the processing of Polyester is available. Best fit for this package is the new traveller STARLETplus from Bracker. The G 32 ring spinning machine can now be retrofitted with the suction tube ECOrized. This also applies to the machines G 33, G 35, G 36. The conversion with the suction tube ECOrized permits sustainable energy and cost savings.
J 26 Automated Air-Jet Spinning Machine
With the J 26, Rieter extends the application range for air-jet technology and presents an additionally optimized machine.
Processing of Polyester with P 26
With the processing of Polyester, the challenge lies in the deposits of spinning finish and co-polymers. For this reason, Rieter now offers the option P 26 which significantly extends the time between the necessary cleaning operations.
New option for six robots
A new option is the application of six robots on the machine. This allows applications which imply a higher rate of ends dow n or quality cuts to be processed.
New option for soft yarns
The majority of air-jet yarns are later processed to knitted fabrics which require a softer touch. To this end, Rieter has developed technology components and setting parameters.
New option Q 10 A for air-jet spinning
Rieter has for many years successfully used the Q 10 A yarn clearer in rotor spinning. Now it has been further developed for air-jet spinning. Based on an accurate monitoring of yarn structure, hairiness and yarn diameter, it interprets not only the standard functions but also the yarn tenacity.
K 46 Compact Spinning Machine
1824 spindles per machine
With 1824 spinning positions, the K 46 Com4 compact spinning machine increases the production per square meter in the spinning mill. The Rieter system range enables optimal machine layout and process workflows from the fibre to the finished yarn, even with these long compact machines.
New quality package for better yarn quality
Rieter now offers a quality package for the K 46 that leads to a significant improvement of the quality parameters CVm and IPI. It is an ideal supplement for spinning mills with high quality requirements.
New suction system ECOrized for long machines
The energy consumption per kilogram of spun yarn from Rieter compacting system with suction drum today already lies far below that of apron systems. The new double-sided suction system ECOrized for long compact spinning machines now additionally reduces the energy consumption.
|Printer friendly Cite/link Email Feedback|
|Publication:||Pakistan Textile Journal|
|Date:||Nov 30, 2015|
|Previous Article:||Staubli showcases a selection of its most modern products.|
|Next Article:||Loepfe offers the solution to avoid Moire Effect in Open-End Spinning.|