Title |
Author |
Type |
Date |
Words |
Liftoff: Space polymers will boldly go where no materials have gone before. |
Giordano, Geoff |
|
May 1, 2021 |
2080 |
Neutron scattering researched. |
Rohrer, Jill |
|
Aug 1, 2020 |
160 |
Army Research May Lead To New Class of Materials. |
|
|
Feb 1, 2020 |
404 |
Combinatorial and Computational Approaches in Polymeric Biomaterial Research: Review. |
Harikrishnan, Pandurangan; Krishnan, Avinesh |
|
Jan 1, 2020 |
3172 |
Study of Tensile Properties of Multiwalled Carbon Nanotube/Polyether Ether Ketone Polymer Composites at the Nanoscale. |
Hsu, Chun-Yen; Scrafford, Kathryn; Ni, Chaoying; Deng, Fei |
Report |
Jun 1, 2019 |
3731 |
POLYSILAZANES--Binders That Make a Difference to Surfaces. |
Wang, Yang; Grottenmuller, Ralf; Lorenz, Theresa |
Report |
Jun 1, 2019 |
3035 |
Preparation and Biopharmaceutical Evaluation of Novel Polymeric Nanoparticles Containing Etoposide for Targeting Cancer Cells/Kanser Hucrelerini Hedefleyen Etopozit Iceren Yeni Polimerik Nanopartikullerin Hazirlanmasi ve Biyofarmasotik Degerlendirmesi. |
Thiyagarajan, Ayyappan; Saravanabhavan, Shanmugam; Thangarasu, Vetrichelvan |
Report |
May 17, 2019 |
5626 |
Multifunctional Polyaniline/Chloroplatinic Acid Composite Material: Characterization and Potential Applications. |
Ozkazanc, Ersel; Ozkazanc, Hatice |
Report |
Jan 1, 2019 |
5542 |
Preparation of Partially Neutralized Poly(acrylic acid) Microspheres via Inverse Pickering Suspension Polymerization. |
Ceylan, Ozgur; Kaya, Mehmet Arif; Sarac, Ayfer |
Report |
Jan 1, 2019 |
4806 |
Synthesis, Characterization and Biological Studies of Schiff Base Polymeric Resin. |
|
Report |
Feb 28, 2018 |
3245 |
A Study on the Fundamental Quality of Magnesia-Phosphate-Formed Mortar Composites Using Superabsorbent Polymer for Development of Concrete for Biological Panel. |
Choi, Yun-Wang; Oh, Sung-Rok; Kim, Cheol-Gyu; Lee, Jae-Heun |
Report |
Jan 1, 2018 |
3877 |
The Effects of Monomers Used in Polymeric Biomaterials on Renal Tissue/ Efectos de los Monomeros de los Biomateriales Polimericos Utilizados en Tejido Renal. |
Saraydin, Serpil Unver; Saraydin, Dursun; Inan, Zeynep Deniz Sahin; Kutlu, Berna Ozdenoglu |
|
Dec 1, 2017 |
2962 |
ADHESIVE SYSTEM AFFECTS REPAIR BOND STRENGTH OF RESIN COMPOSITE/Adeziv Sistem Kompozit Rezinin Tamir Baglanma Dayanimini Etkiler. |
Irmak, Ozgur; CelIksoz, Ozge; Yilmaz, Begum; Yaman, Batu Can |
Report |
Oct 1, 2017 |
3683 |
Thermally activated multiple self-healing Diels-Alder epoxy system. |
Iacono, S. Dello; Martone, A.; Pastore, A.; Filippone, G.; Acierno, D.; Zarrelli, M.; Giordano, M.; |
Report |
Jul 1, 2017 |
4145 |
Focus on... Robert Josman: this City University of New York student has taken a nontraditional path to the plastics industry, via nuclear medicine and history. |
|
Guest commentary |
Jul 1, 2017 |
916 |
The changing landscape of polymer research: future polymer research activities are likely to focus on new applications where plastics have not been traditionally used. |
Jana, Sadhan C. |
|
Jul 1, 2017 |
1144 |
Fabrication and testing of sisal fiber reinforced polymers. |
Manikandan, A.; Raj, Cyril Reuben; Ashvin, J. |
|
Jun 1, 2017 |
2717 |
Synthesis of phenolic bio-resin for advanced biocomposites reinforced with coconut shell particle: mechanical and thermal properties. |
Sankar, R. Udhaya; Karthikeyan, B. |
Report |
Jun 1, 2017 |
3503 |
Numerical analysis of polarization filter using photonic crystal fiber with gold metal. |
Rajeswari, D.; Raja, A. Sivanantha; Selvendran, S. |
|
May 1, 2017 |
2248 |
UCONN research yields polymer 'mechanochromic' devices: new plastics switch from opaque to transparent or change color when subjected to mechanical strain. |
Callari, Jim |
|
Apr 1, 2017 |
729 |
New research into the use of shrimp shells for "green" polymers underway. |
|
|
Jan 1, 2017 |
360 |
Modeling Punching Shear Capacity of Fiber-Reinforced Polymer Concrete Slabs: A Comparative Study of Instance-Based and Neural Network Learning. |
Hoang, Nhat-Duc; Vu, Duy-Thang; Tran, Xuan-Linh; Tran, Van-Duc |
Report |
Jan 1, 2017 |
8329 |
Polarized Emission from Conjugated Polymer Chains Aligned by Epitaxial Growth during Off-Center Spin-Coating. |
Anzai, Takuya; Porzio, William; Vohra, Varun |
Technical report |
Jan 1, 2017 |
3985 |
Anisotropy Influences on the Drug Delivery Mechanisms by Means of Joint Invariant Functions. |
Cioca, G.; Bacaita, E.S.; Agop, M.; Ursulescu, C. Lupascu |
Report |
Jan 1, 2017 |
4367 |
Carbon fiber reinforced polymer (CFRP) inserted in different configurations of the tensile zone retrofitting with microconcrete containing steel fibers to the strengthening of beams/Polimero reforcado com fibras de carbono (PRFC) inserido em diferentes configuracoes do banzo tracionado reconstituido por microconcreto com fibras de aco para o reforco de vigas. |
Ferrari, Vladimir Jose; Arquez, Ana Paula; de Hanai, Joao Bento |
|
Oct 1, 2016 |
3930 |
Vehicle door seals. |
Corneliussen, Roger |
Brief article |
Jul 1, 2016 |
185 |
Plugging into the power of polymers: lithium-ion and other battery technologies will increasingly be getting more solid support and energy density from polymers. |
Evans, Jon |
|
Feb 1, 2016 |
1697 |
The effects of microwave heating on the kinetics of isothermal dehydration of equilibrium swollen poly(acrylic-co-methacrylic acid) hydrogel. |
Jovanovic, Jelena; Potkonjak, Biljana; Adnadjevic, Tanja; Adnadjevic, Borivoj |
|
Jan 1, 2016 |
6575 |
New atomic force microscope optimised for polymer research. |
|
|
Nov 1, 2015 |
348 |
MAKER SPOILER IS CAR DAIHATSU USE FOR KIND POLYMER INGREDIEN ACRYLONITRIL BUTADIENA STYRENE. |
|
Report |
Oct 31, 2015 |
3212 |
Development of new shellac based pH responsive polymer for biomedical applications. |
Barik, Arundhati; Parhi, P.; Dey, R.K. |
Report |
Jul 1, 2015 |
4814 |
A reason for resin. |
|
Brief article |
Jun 13, 2015 |
161 |
Polymer-ceramic implants. |
Corneliussen, Roger |
Brief article |
Jun 1, 2015 |
189 |
Polymer breakthrough: stronger than bone, self-healing, and fully recyclable: IBM scientists have recently discovered a new class of polymers--said to be the world's first family of materials that are stronger than bone and self-healing. |
|
|
May 1, 2015 |
1062 |
Shear field in the mold cavity of multimelt multi-injection molding revealed by the morphology distribution of a model polymer blend. |
Wu, Jing-Jing; Yang, Wei; Zhang, Kai; Zhang, Rui-Yan; Feng, Jian; Liu, Zheng-Ying; Xie, Bang-Hu; Zha |
Report |
Oct 1, 2014 |
5179 |
Oxygen scavengers. |
Corneliussen, Roger |
Brief article |
Oct 1, 2014 |
116 |
Sources of irreversibilities in a perfectly axisymmetric geometry at low Reynolds numbers. |
Loux, C.; Bouchet, G.; Bouquey, M.; Muller, R. |
Report |
Sep 1, 2014 |
6090 |
Effect of electron beam irradiation dose on the rheology, morphology, and thermal properties of branched polypropylene/polybutene-1 blend. |
Ardakani, Farzaneh; Jahani, Yousef; Morshedian, Jalil |
Report |
Aug 1, 2014 |
5166 |
Morphological, thermal, and mechanical properties of poly(vinyl chloride)/acrylonitrile butadiene rubber blend using CuS[O.sub.4] x 5[H.sub.2]O cross-linking agent. |
Liu, Hai; Wang, Jie; Wen, Sheng; Dong, Lijie; Xiong, Chuanxi; Yao, Junlong |
Report |
Aug 1, 2014 |
4784 |
Experimental and numerical studies on bubble dynamics in nonpressurized foaming systems. |
Emami, Maryam; Thompson, Michael R.; Vlachopoulos, John |
Report |
Aug 1, 2014 |
7029 |
Preparation and properties of rice husk-filled plasticized wheat gluten biocomposites. |
Emadi, Seyederfanhossein; Seki, Yoldas; Sever, Kutlay; Sarikanat, Mehmet |
Report |
Jul 1, 2014 |
3599 |
Molecularly imprinted poly(acrylonitrile-co-acrylic acid) matrix with sclareol. |
Dima, Stefan-Ovidiu; Dobre, Tanase; Chetraru, Olga; Nicolae, Cristian-Andi; Spataru, Catalin-Ilie; S |
Report |
Jul 1, 2014 |
7305 |
3D features in the calendering of thermoplastics a computational investigation. |
Polychronopoulos, Nickolas D.; Sarris, Ioannis E.; Papathanasiou, T.D. |
Report |
Jul 1, 2014 |
6585 |
The composition and morphology of epoxidized trans-1,4-polyisoprene obtained by heterogeneous synthesis method. |
Shao, Huafeng; Yu, Qianhua; Yao, Wei; He, Aihua; Han, Mingzhe; Huang, Baochen |
Report |
Jun 1, 2014 |
3122 |
Morphological factors affecting the permeation resistance of nanocomposite blend films. |
Bhuva, Nihir A.; Goettler, Lloyd A. |
Report |
Jun 1, 2014 |
5311 |
Thermal, mechanical, and morphological characterization of biobased thermoplastic starch from agricultural waste/polypropylene blends. |
Pang, Ming Meng; Pun, Meng Yan; Ishak, Zainal Arifin Mohd. |
Report |
Jun 1, 2014 |
6335 |
The influence of thermo-mechanical history on structure development of elastomeric and amorphous glass thermoplastic polyurethanes. |
Silva, Jorge; Meltzer, Donald; Liu, Jia; Cox, Mark; Maia, Joao |
Report |
Jun 1, 2014 |
5459 |
Dispersive mixing efficiency of an elongational flow mixer on PP/EPDM blends: morphological analysis and correlation with viscoelastic properties. |
Rondin, Jerome; Bouquey, Michel; Muller, Rene; Serra, Christophe A.; Martin, Gregory; Sonntag, Phili |
Report |
Jun 1, 2014 |
7882 |
Morphology and mechanical properties of nanostructured acrylic tri-block-copolymer modified epoxy. |
Bashar, Mohammad T.; Sundararaj, Uttandaraman; Mertiny, Pierre |
Report |
May 1, 2014 |
5361 |
Rheological properties of bitumen modified with ethylene butylacrylate glycidylmethacrylate. |
Bulatovic, Vesna Ocelic; Rek, Vesna; Markovic, Josipa |
Report |
May 1, 2014 |
5935 |
Miscibility analysis in LLDPE/LDPE blends via thermorheological analysis: correlation with branching structure. |
Dordinejad, Abdol Kamal; Jafari, Seyed Hassan |
Report |
May 1, 2014 |
3775 |
Polyamide 6-cellulose composites: effect of cellulose composition on melt rheology and crystallization behavior. |
|
Report |
Apr 1, 2014 |
5956 |
Modeling the Rheology of SR1500 and LY556 Epoxies Under Manufacturer's Recommended Cure Cycles after Viscosimetry and Rheometry Characterization. |
Faria, Hugo; Pires, Andrade F.M.; Marques, Torres A. |
Report |
Apr 1, 2014 |
5590 |
Morphology and Structure of Nylon-6 Crystallized in Epoxy Resin Matrix. |
Vyas, Aniket; Iron, Jude O. |
Report |
Apr 1, 2014 |
4849 |
Morphology and Properties of Highly Filled iPP/[Ti0/sub.2] Nanocomposites. |
Zohrevand, Ahmad; Ajji,Abdellah; Frej, Mighri |
Report |
Apr 1, 2014 |
9082 |
Systematic Organophilization of Montmorillonite: The Impact Thereof on the Rheometric and Mechanical Characteristics of NBR and SBR Based Nanocomposites. |
Essawy, Hisham A.; Tawfik, Magda E.; Khalil, Ahmed M.; El-Sabbagh, Salwa H. |
Report |
Apr 1, 2014 |
4845 |
Selective carbon membranes. |
Corneliussen, Roger |
Brief article |
Apr 1, 2014 |
129 |
Copolymers based on epoxidized soybean oil and diglycidyl ether of bisphenol A: relation between morphology and fracture behavior. |
Altuna, Facundo. I.; Pettarin, Valeria; Martin, Loli; Retegi, Alona; Mondragon, Inaki; Ruseckaite, R |
Report |
Mar 1, 2014 |
4642 |
Thermoplastic polyurethane/polypropylene blends based on novel vane extruder: a study of morphology and mechanical properties. |
Jia, Shikui; Qu, Jinping; Liu, Weifeng; Wu, Chengran; Chen, Rongyuan; Zhai, Shufeng; Huang, Zan |
Report |
Mar 1, 2014 |
4814 |
Central composite design of zinc removal from model water using Chitosan biopolymer. |
Qudsieh, Isam Y.; Mirghani, E.S.; Kabbashi, Nasserldeen A.; Muyibi, Suleyman A. |
Report |
Mar 1, 2014 |
3792 |
Small publication means big exposure for collaborators. |
Lougheed, Tim |
Brief article |
Mar 1, 2014 |
266 |
Mechanical and morphological properties of a ternary polyamide 6 Nanocomposite with optimized stiffness/ toughness performance. |
Geier, Simon |
Report |
Feb 1, 2014 |
4911 |
Effects of reactive and nonreactive poss types on the mechanical, thermal, and morphological properties of plasticized poly(lactic acid). |
Kodal, Mehmet; Sirin, Humeyra; Ozkoc, Guralp |
Report |
Feb 1, 2014 |
6530 |
Structure memory effects of polyethylene blends in temperature window. |
Gai, Jing-Gang; Kang, Jian; Gong, Xiao-Lei; Wang, Wei-Wei |
Report |
Feb 1, 2014 |
4011 |
Experimental study of the melt fracture behavior of filled high-density polyethylene melts. |
Baldi, Francesco; Briatico-Vanqosa, Francesco; Franceschini, Anika |
Report |
Feb 1, 2014 |
7881 |
Blends of high-density polyethylene with chlorinated polyethylene: morphology, thermal, rheological, and mechanical properties. |
Vikas, Chaudhry; Mittal, Vikas |
Report |
Jan 1, 2014 |
5304 |
Melt rheological investigation of polylactide-nanographite platelets biopolymer composites. |
Narimissa, Esmaeil; Gupta, Rahul K.; Kao, Nhol; Choi, Hyoung J.; JoHands, Margaret; Bhattacharyal, S |
Report |
Jan 1, 2014 |
8389 |
Preparation and characterization of polymer electrolyte of glycidyl methacrylate-methyl methacrylate-LiCl[O.sub.4] plasticized with ethylene carbonate. |
Imperiyka, M.; Ahmad, A.; Hanifah, S.A.; Rahman, M.Y.A. |
Report |
Jan 1, 2014 |
4573 |
Towards a smart encapsulation system for small-sized electronic devices: a new approach. |
Schmitz-Hertzberg, Sebastian-Tim; Liese, Rick; Terjung, Carsten; Bier, Frank F. |
Report |
Jan 1, 2014 |
7759 |
pore throat size for Honggang reservoir. |
Yin, Dan-Dan; Li, Yi-Qiang; Chen, Bingchun; Zhang, Hui; Liu, Bin; Chang, Qingle; Li, Yanyue |
Report |
Jan 1, 2014 |
4242 |
Utilization of zinc dust for a core monomer 2-bromo-3-hexylthien-5-ylzinc bromide: its synthesis and application for the preparation of regioregular poly(3-hexylthiophene). |
Kim, Seung-Hoi |
Report |
Jan 1, 2014 |
2367 |
Rheological properties of hydrophobically associative copolymers prepared in a mixed micellar method based on methacryloxyethyl-dimethyl cetyl ammonium chloride as surfmer. |
Liu, Rui; Pu, WanFen; Jia, Hu; Shang, XiaoPei; Pan, Yue; Yan, ZhaoPeng |
Report |
Jan 1, 2014 |
8355 |
Preparation and characterization of UV-curable cyclohexanone-formaldehyde resin and its cured film properties. |
Yang, Guang; Li, Hongqiang; Lai, Xuejun; Wang, Yi; Zhang, Yifu; Zeng, Xingrong |
Report |
Jan 1, 2014 |
3781 |
Rheological and electrical properties of carbon black-based poly(vinylidene fluoride) composites. |
Wang, Jianghong; Wu, Defeng; Li, Xiang; Zhang, Ming |
Report |
Dec 1, 2013 |
4193 |
Dynamic and capillary shear rheology of natural fiber-reinforced composites. |
Moigne, Nicolas Le; ven den Oever, Martien; Budtova, Tatiana |
Report |
Dec 1, 2013 |
7850 |
Silicon carbide-strengthened magnetorheological elastomer: preparation and mechanical property. |
Yang, Jie; Gong, Xinglong; Zong, Luhang; Peng, Chao; Xuan, Shouhu |
Report |
Dec 1, 2013 |
5834 |
Effect of added amines on the morphology of multivesiculated polyester particles. |
Dias, Angela; Machado, Joao; Moniz, Jorge; Mendes, Adelio; Magalhaes, Fernao D. |
Report |
Nov 1, 2013 |
4039 |
Rheological properties and stability of ethylene vinyl acetate polymer-modified bitumen. |
Bulatovic, Vesna Ocelic; Rek, Vesna; Markovic, Kristina Jurkas |
Report |
Nov 1, 2013 |
4477 |
Study of the morphology and rheological behavior of polymer-modified asphalt blends prepared with poly(styrene-b-butadiene-b-styrene) and poly(styrene-b[[(butadiene).sub.1-x] -[(ethylene-co-butylene).sub.x]]-b-styrene) of star-like molecular architecture. |
Aguirre, Paola Gonzalez; Torres, Luis Medina; Fonteix, Christian; Pla, Fernand; Najera, Rafael Herre |
Report |
Nov 1, 2013 |
6010 |
Curing behavior and rheology properties of alkyl-imidazolium-treated rectorite/epoxy nanocomposites. |
Li, Wei; Hou, Linxi; Zhou, Qi; Yan, Liu; Loo, Leslie S. |
Report |
Nov 1, 2013 |
4312 |
Skin-foam-skin TP-Seal[R] rotomolded structures: a new concept for the production of car bodies for urban mobility. |
Maziers, E. |
Statistical data |
Oct 1, 2013 |
1151 |
Chemorheological behavior of [beta]-SiAION aqueous suspensions in gelcasting process. |
Roghabadi, Farzaneh Arabpour; Kokabi, Mehrdad; Bahramian, Ahmad Reza |
Report |
Oct 1, 2013 |
2973 |
Influence of the addition of lubricant on the properties of poly(ether ether ketone) fibers. |
Luan, Jiashuang; Zhang, Shuling; Geng, Zhi; Wang, Guibin |
Report |
Oct 1, 2013 |
2872 |
Effect of EPDM-g-MAH on the morphology and properties of PA6/EPDM/HDPE ternary blends. |
Zhou, Yan; Wang, Wei; Dou, Rui; Li, Lan-peng; Yin, Bo; Yang, Ming-bo |
Report |
Sep 1, 2013 |
6527 |
Polymer Engineering & Science. |
|
Brief article |
Sep 1, 2013 |
104 |
Characterization of morphology and gas separation performance of dry-cast polycarbonate membranes. |
Fu, Ywu-Jang; Chen, Jung-Tsai; Chen, Chun-Chieh; Liao, Kuo-Sung; Hu, Chien-Chieh; Lee, Kueir-Rarn; L |
Report |
Aug 1, 2013 |
3831 |
Influence of moieties on morphology, thermal, and dielectric properties in polyamide-polyhedral oligomeric silsequioxanes nanocomposites. |
Gnanasekaran, D.; Walter, P. Ajit; Reddy, B.S.R. |
Report |
Aug 1, 2013 |
3388 |
Influence of shape and surface modification of nanoparticle on the rheological and dynamic-mechanical properties of polyamide 6 nanocomposites. |
Marini, Juliano; Bretas, Rosario Elida Suman |
Report |
Jul 1, 2013 |
7674 |
Superimposed effects in high-shear-rate capillary rheology of polystyrene melt. |
Guan, Wei-Sheng; Huang, Han-Xiong |
Report |
Jul 1, 2013 |
4799 |
Flow instabilities in Rheotens experiments: analysis of the impacts of the process conditions through Neural Network modeling. |
Tronci, Stefania; Coppola, Salvatore; Bacchelli, Fabio; Grosso, Massimiliano |
Report |
Jun 1, 2013 |
6665 |
Mussels provide muscle for new adhesive. |
|
|
Jun 1, 2013 |
388 |
Morphological aspects of injected polypropylene/clay nanocomposite materials. |
Salah, Hend Ben Hadj; Daly, Hachmi Ben; Denault, Johanne; Perrin, Florence |
Report |
May 1, 2013 |
4950 |
Mechanical, thermal, barrier, and rheological properties of poly(ether-block-amide) elastomer/organoclay nanocomposite prepared by melt blending. |
Choi, Myung-Chan; Jung, Ji-Yoen; Yeom, Hyun-Sik; Chang, Yong-Wook |
Report |
May 1, 2013 |
5490 |
Investigation on variable shear modulus of magnetorheological elastomer based on natural rubber due to change of fabrication design. |
Yoon, Ji-Hyun; Yang, In-Hyung; Jeong, Un-Chang; Chung, Kyung-Ho; Lee, Jung-Youn; Oh, Jae-Eung |
Report |
May 1, 2013 |
4486 |
Investigation of the influence of processing conditions on the thermal, rheological and mechanical behavior of polypropylene nanocomposites. |
Mattausch, H.; Laske, S.; Duretek, I.; Kreith, J.; Maier, G.; Holzer, C. |
Report |
May 1, 2013 |
6772 |
Effect of the nanoclay types on the rheological response of unsaturated polyester-clay nanocomposites. |
Rezadoust, Amir Masoud; Esfandeh, Masoud; Beheshty, Mohammad Hosain; Heinrich, Gert |
Report |
Apr 1, 2013 |
4938 |
The effect of recycled polymer addition on the thermorheological behavior of modified lubricating greases. |
Martin-Alfonso, J.E.; Valencia, C.; Sanchez, M.C.; Franco, J.M.; Gallegos, C. |
Report |
Apr 1, 2013 |
4962 |
The aspect ratio of epoxy matrix nanocomposites reinforced with graphene stacks. |
Corcione, Carola Esposito; Freuli, Fabrizio; Maffezzoli, Alfonso |
Report |
Mar 1, 2013 |
5476 |
Nanocomposites of poly(ethylene oxide) and multiwall carbon nanotube prepared using an organic salt-assisted dispersion technique. |
Ratna, Debdatta; Jagtap, Siddheshwar B.; Abraham, Thomas |
Report |
Mar 1, 2013 |
4409 |
Dynamic Rheology and morphology of HDPE-fumed silica composites: effect of interface modification. |
Nandi, Sangita; Bose, Sanjukta; Mitra, Susanta; Ghosh, Anup K. |
Report |
Mar 1, 2013 |
4154 |
Rheological and thermal behaviors of commercial poly(aryletherketone)s. |
White, Kevin L.; Jin, Lin; Ferrer, Nangelie; Wong, Minhao; Bremner, Tim; Sue, Hung-Jue |
Report |
Mar 1, 2013 |
6433 |
Thermal, mechanical, and rheological properties of polylactide/poly(1,2-propylene glycol adipate). |
Zhang, Huiliang; Fang, Jianyong; Ge, Huanhuan; Han, Lijing; Wang, Xuemei; Hao, Yanping; Han, Changyu |
Report |
Jan 1, 2013 |
3830 |
Study of the degradation of typical HVAC materials, filters, and components irradiated by UVC energy--Part III: manufactured components. |
Kauffman, Robert E.; Wolf, J. Douglas |
Report |
Jan 1, 2013 |
7129 |
Asset management business model for design, realization, and maintenance of Fibre Reinforced Polymer bridges. |
Sebastian, Rizal |
|
Jan 1, 2013 |
5766 |
The effect of polymer content on the non-Newtonian behavior of acetaminophen suspension. |
Moghimipour, Eskandar; Kouchak, Maryam; Salimi, Anayatollah; Bahrampour, Saeed; Handali, Somayeh |
Report |
Jan 1, 2013 |
2933 |
Multiphase, multicomponent simulation for flow and transport during polymer flood under various wettability conditions. |
Lee, Ji Ho; Lee, Kun Sang |
Report |
Jan 1, 2013 |
3585 |
Studies in finishing effects of clay mineral in polymers and synthetic fibers. |
Uddin, Faheem |
|
Jan 1, 2013 |
9223 |
Plastic seals in speeding bullets: layered polymer melts and mixes when hit by projectiles. |
Ehrenberg, Rachel |
|
Dec 29, 2012 |
380 |
Rheological behavior of cycloolefin copolymer/graphite composites. |
Kasgoz, Alper; Akin, Dincer; Durmus, Ali |
Report |
Dec 1, 2012 |
5236 |
Thermorheological properties of poly [epsilon]-caprolactone/polylactide blends. |
Noroozi, Nazbanoo; Schafer, Laurel L.; Hatzikiriakos, Savvas G. |
Report |
Nov 1, 2012 |
5380 |
Molecular and structural analysis of epoxide-modified recycled poly(ethylene terephthalate) from rheological data. |
Xiao, Liren; Wang, Hai; Qian, Qingrong; Jiang, Xia; Liu, Xinping; Huang, Baoquan; Chen, Qinghua |
Report |
Oct 1, 2012 |
4271 |
Rheological and electrical percolation thresholds of carbon nanotube/polymer nanocomposites. |
Penu, Christian; Hu, Guo-Hua; Fernandez, Amaia; Marchal, Philippe; Choplin, Lionel |
Report |
Oct 1, 2012 |
5118 |
Rheological behavior of polypropylene nanocomposites at low concentration of surface modified carbon nanotubes. |
Thomas, Selvin P.; Girei, Salihu Adamu; Atieh, Muataz Ali; De, S.K.; Al-Juhani, Abdulhadi |
Report |
Sep 1, 2012 |
3129 |
Thermal, mechanical, and rheological characterization of polypropylene/layered double hydroxide nanocomposites. |
Lonkar, Sunil P.; Therias, Sandrine; Leroux, Fabrice; Gardette, Jean-Luc; Singh, Raj Pal |
Report |
Sep 1, 2012 |
4850 |
Relaxation properties of polyoxymethylene and ethylene-octene copolymer blend in solid and melt states/Poluoksumetuleeni ja eteeni ning okteeni kopolumeeri segu relaksatsiooniomadused tahkes ja sulaolekus. |
Grigalovica, Agnese; Bartule, Madara; Zicans, Janis; Meri, Remo Merijs; Heim, Hans-Peter; Berger, Ch |
Report |
Sep 1, 2012 |
2727 |
Rheological properties and morphological evolutions of polypropylene/ethylene-butene copolymer blends. |
Zhang, Xian-Ming; Li, Hao; Chen, Wen-Xing; Feng, Lan-Fang |
Report |
Aug 1, 2012 |
4161 |
Study on viscosity of polymer melt flowing through microchannels considering the wall-slip effect. |
Zhao, Danyang; Jin, Yifei; Wang, Minjie |
Report |
Aug 1, 2012 |
4384 |
Effects of the aliphatic/aromatic structure on the miscibility, thermal, optical, and rheological properties of some polyimide blends. |
Cosutchi, Andreea Irina; Nica, Simona-Luminita; Hulubei, Camelia; Homocianu, Mihaela; Ioan, Silvia |
Report |
Jul 1, 2012 |
6371 |
The rheological, thermostable, and mechanical properties of polypropylene/fullerene [C.sub.60] nanocomposites with improved interfacial interaction. |
Wan, Dong; Wang, Yujie; Wen, Xin; Qiu, Jian; Jiang, Zhiwei; Tan, Haiying; Tang, Tao |
Report |
Jul 1, 2012 |
4485 |
Effect of dispersion on rheological and mechanical properties of polypropylene/carbon nanotubes nanocomposites. |
Zhou, Kai; Gu, Shu-Ying; Zhang, Yi-Han; Ren, Jie |
Report |
Jul 1, 2012 |
5818 |
Study of the degradation of typical HVAC materials, filters and components irradiated by UVC energy--part II: polymers. |
Kauffman, Robert E.; Douglas Wolf, J. |
|
Jul 1, 2012 |
5166 |
Rheological, physical, and thermal characterization of single-site catalyst based polyethylenes for seal layer applications. |
Sadeghi, F.; Ajji, A. |
Report |
May 1, 2012 |
5744 |
Relating fracture behavior to spherulite size in conrolled-rheology polypropylenes. |
Salazar, A.; Rico, A.; Rodriguez, S.; Navarro, J.M.; Rodriguez, J. |
Report |
Apr 1, 2012 |
5088 |
Shear-induced crystallization of isotactic polypropylene studied by simultaneous light intensity and rheological measurements. |
Tiang, Jen Shueng; Dealy, John M. |
Report |
Apr 1, 2012 |
8698 |
Rheological properties and irreversible dispersion changes in Carbon nanotube/epoxy systems. |
Schuiz, Sonja Carolin; Schlutter, Jana; Buschhorn, Samuel T.; Schulte, Karl; Bauhofer, Wolfgang |
Report |
Apr 1, 2012 |
4386 |
Exercise caution! |
Corneliussen, Roger |
Brief article |
Mar 1, 2012 |
250 |
The role of filler network in nonlinear viscoelastic behavior of vapor grown carbon nanofiber filled polystyrene: a strain dependent rheological behavior and electrical conductivity study. |
Zhao, Li; Yang, Hongmei; Song, Yihu; Tan, Yeqiang; Hu, Guo-Hua; Zheng, Qiang |
Report |
Mar 1, 2012 |
2992 |
Capillary flow of low-density polyethylene. |
Ansari, Mahmoud; Zisis, Thanasis; Hatzikiriakos, Savvas G.; Mitsoulis, Evan |
Report |
Mar 1, 2012 |
8264 |
Lining up. |
Corneliussen, Roger |
Brief article |
Mar 1, 2012 |
211 |
Influence of injection velocity and joint geometry on quality of insert molding. |
Lin, Chung-Chih |
Report |
Feb 1, 2012 |
5064 |
Mechanical, thermal, and rheological behavior of ethylene methyl acrylate-MWNT nanocomposites. |
Basuli, Utpal; Chaki, Tapan Kumar; Chattopadhyay, Santanu |
Report |
Feb 1, 2012 |
6926 |
Rheological hybrid effect in dually filled polycarbonate melt containing liquid crystalline polymer. |
Mi, Qinyong; Zhang, Xiaocheng; He, Jiasong |
Report |
Feb 1, 2012 |
5603 |
Effect of superabsorbent polymer (Tawarat A200) on two hybrid of corn (KSC700 and KSC500) under deficit irrigation. |
Rafiei, Felora; Nourmohammadi, Gorban; Chokan, Rajab; Kashani, Ali; Abad, Houssein Haidari Sharif; S |
Report |
Jan 1, 2012 |
4373 |
Entropically-driven ring-opening polymerization of cyclic butylene terephthalate: rheology and kinetics. |
Chen, Hongliang; Yu, Wei; Zhou, Chixing |
Report |
Jan 1, 2012 |
6939 |
Extensional rheology of raw natural rubber from new clones of Hevea brasiliensis. |
Lotti, Cybele; Moreno, Rogerio M.B.; Goncalves, Paulo de S.; Bhattacharya, Satinath; Mattoso, Luiz H |
Report |
Jan 1, 2012 |
6046 |
Morphology and rheological behavior of polylactic acid/clay nanocomposites. |
Singh, Satpal; Ghosh, Anup K.; Maiti, Saurindra N.; Raha, Sumanta; Gupta, Rahul K.; Bhattacharya, Sa |
Report |
Jan 1, 2012 |
3962 |
MARGINAL ADAPTATION OF A SELF-ETCH ADHESIVE/ SILORANE-BASED RESIN COMPOSITE IN CLASS V RESTORATIONS. |
hasan, mashael mohammad bin; saif, khaled al |
Report |
Dec 31, 2011 |
4622 |
Rheological properties of cotton pulp cellulose dissolved in 1-butyl-3-methylimidazolium chloride solutions. |
Liu, Zhen; Wang, Hui; Li, Zengxi; Lu, Xingmei; Zhang, Xiangping; Zhang, Suojiang; Zhou, Kebin |
Report |
Dec 1, 2011 |
2768 |
Morphology prediction and the effect of core-shell structure on the rheological behavior of PP/EPDM/HDPE ternary blends. |
Lan-Peng, Li; Yin, Bo; Yang, Ming-Bo |
Report |
Dec 1, 2011 |
3964 |
Elongation properties of polyethylene melts. |
Liang, Ji-Zhao; Zhong, Lei |
Report |
Dec 1, 2011 |
2841 |
Rheology/morphology relationship of plasticized and nonplasticized thermoplastic elastomers based on ethylene-propylene-diene-terpolymer and polypropylene. |
Shahbikian, Shant; Carreau, Pierre J.; Marie-Claude, Heuzey; Ellul, Maria D.; Nadella, Hari P.; Chen |
Report |
Nov 1, 2011 |
8484 |
Melt-compounding of PP/Clay nanocomposite and relationship between its microstructure and shear strain in the flow field based on rheological analysis. |
Jiang, Guo; Huang, Han-Xiong |
Report |
Nov 1, 2011 |
3861 |
Thixotropy and physical aging in acrylic emulsion paint. |
Baldewa, Bharat; Joshi, Yogesh M. |
Report |
Oct 1, 2011 |
5230 |
Wear goggles! |
Corneliussen, Roger |
Brief article |
Oct 1, 2011 |
226 |
Study of water absorption and biodegradation of potato starch based polyethylene. |
Khoramnejadian, Shahrzad |
Report |
Sep 1, 2011 |
1128 |
Processing and rheological behavior of ABS/montmorillonite nanocomposites via single screw capillary extrusion. |
Sanchez, Saul E.; Ibarra, Rigoberto |
Report |
Sep 1, 2011 |
4275 |
A study on fusion and rheological behaviors of PVC/Si[O.sub.2] microcomposites and nanocomposites: The Effects of Si[O.sub.2] particle size. |
Ari, Gulsen Albayrak; Aydin Ismail |
Report |
Aug 1, 2011 |
3792 |
Heat treatment. |
Corneliussen, Roger |
|
Jul 1, 2011 |
216 |
Takes a punch. |
Corneliussen, Roger |
Brief article |
Jul 1, 2011 |
263 |
Evaluation of the degree of dispersion of nanofillers by mechanical, rheological, and permeability analysis. |
Corcione, Carola Esposito; Cavallo, Anna; Pesce, Emanuela; Greco, Antonio; Maffezzoli, Alfonso |
Report |
Jul 1, 2011 |
4214 |
Processing and characterization of recycled poly(ethylene terephthalate) blends with chain extenders, thermoplastic elastomer, and/or poly(butylene adipate-co-terephthalate). |
Srithep, Yottha; Javadi, Alireza; Pilla, Srikanth; Turng, Lih-Sheng; Gong, Shaoqin; Clemons, Craig; |
Report |
Jun 1, 2011 |
5483 |
Effect of the addition of silane coupling agents on the properties of wollastonite-reinforced poly(ether ether ketone) composites. |
Ma, Gang; Yue, Xigui; Zhang, Shuling; Rong, Changru; Wang, Lifeng; Wang, Guibin; Wang, Hongliang |
Report |
Jun 1, 2011 |
4154 |
Effects of carbon nanotubes and their state of dispersion on the anionic polymerization of [epsilon]-caprolactam: II. rheology. |
Penu, Christian; Hu, Guo-Hua; Fonteix, Christian; Marchal, Philippe; Choplin, Lionel; Feng, Lian-Fan |
Report |
Jun 1, 2011 |
3268 |
Effect of molecular structure and rheology on the compression foam molding of ethylene-[alpha]-olefin copolymers. |
Zhang, Ying; Kontopoulou, Marianna; Ansari, Mahmoud; Hatzikiriakos, Savvas; Park, Chul B. |
Report |
Jun 1, 2011 |
4704 |
Pennsylvania varsity group answers long-pending questions on swimming in elastic liquids. |
|
Brief article |
May 21, 2011 |
307 |
Effect of processing procedures and conditions on structural, morphological, and rheological properties of polyethylene/polyamide/nanoclay blends. |
Mederic, Pascal; Ville, Julien; Huitric, Jacques; Moan, Michel; Aubry, Thierry |
Report |
May 1, 2011 |
6243 |
Seeing it through. |
Corneliussen, Roger |
Brief article |
May 1, 2011 |
275 |
Electrically conducting polypropylene/polyaniline-grafted-short glass fiber composites: microstructure and dynamic mechanical analysis. |
Valerio-Cardenas, Cintya; Romo-Uribe, Angel; Cruz-Silva, Rodolfo |
Report |
Feb 1, 2011 |
5086 |
Origin of the bubble defect in the extrusion coating process. |
Sollogoub, C.; Montmitonnet, P.; Demay, Y.; Agassant, J.F.; Deparis, P. |
Report |
Feb 1, 2011 |
5493 |
Dielectric spectroscopy of poly(butylene succinate-co-butylene adipate) films. |
Tai, Horng-Jer |
Report |
Feb 1, 2011 |
2850 |
Influence of molecular weight on rheological, thermal, and mechanical properties of PEEK. |
Yuan, Mingjun; Galloway, Jeffrey A.; Hoffman, Richard J.; Bhatt, Sanjiv |
Report |
Jan 1, 2011 |
5722 |
Rheological study on high-density polyethylene/organoclay composites. |
Tang, Youhong; Yang, Cheng; Gao, Ping; Ye, Lin; Zhao, Chengbi; Lin, Wei |
Report |
Jan 1, 2011 |
5321 |
A UV-initiated reactive extrusion process for production of controlled-rheology polypropylene. |
He, Guangjian; Tzoganakis, Costas |
Report |
Jan 1, 2011 |
3890 |
Numerical simulation of the self-assembly of a polymer-polymer-solvent ternary system on a heterogeneously functionalized substrate. |
Shang, Yingrui; Kazmer, David; Wei, Ming; Barry, Carol; Mead, Joey |
Report |
Dec 1, 2010 |
5958 |
Influence of the process parameters of an intermeshing co-rotating twin screw extruder on the morphology and notched Izod impact strength of PBT/ABS/MGE blends. |
Ambrosio, Jose D.; Larocca, Nelson M.; Pessan, Luiz A.; Hage, Elias, Jr. |
Report |
Dec 1, 2010 |
5760 |
Structural changes and biodegradation of PLLA, PCL, and PLGA sponges during in vitro incubation. |
Yoshioka, Taiyo; Kamada, Fumiko; Kawazoe, Naoki; Tateishi, Tetsuya; Chen, Guoping |
Report |
Oct 1, 2010 |
6192 |
The role of process parameters in determining wall thickness distribution in plug-assisted thermoforming. |
McCool, Rauri; Martin, Peter J. |
Report |
Oct 1, 2010 |
7054 |
Studies on the melt spinning process of noncircular fiber by numerical and experimental methods. |
Zhou, Ji; Li, Jian; Yu, Wei; Li, Xin; Zhou, Chixing |
Report |
Oct 1, 2010 |
6700 |
Rheology and morphology of Polytrimethylene terephthalate/ethylene propylene diene monomer blends in the presence and absence of a reactive compatibilizer. |
Aravind, Indose; Jose, Seno; Ahn, Kyung Hyun; Thomas, Sabu |
Report |
Oct 1, 2010 |
5457 |
Structure and properties of melt-spun PET/MWCNT nanocomposite fibers. |
Mazinani, Saeedeh; Ajji, Abdellah; Dubois, Charles |
Report |
Oct 1, 2010 |
6703 |
Effects of nanotalc inclusion on mechanical, microstructural, melt shear rheological, and crystallization behavior of polyamide 6-based binary and ternary nanocomposites. |
Balamurugan, Prasath G.; Maiti, S.N. |
Report |
Oct 1, 2010 |
8657 |
Rheological properties of fiber suspensions flowing through a curved expansion duct. |
Lin, Jianzhong; Zhang, Qihua; Zhang, Kai |
Report |
Oct 1, 2010 |
4889 |
Replication characterization of microribs fabricated by combining ultraprecision machining and microinjection molding. |
Yang, Can; Li, Lei; Huang, Hanxiong; Castro, Jose M.; Yi, Allen Y. |
Report |
Oct 1, 2010 |
4947 |
A comparison of seven filling to packing switchover methods for injection molding. |
Kazmer, David O.; Velusamy, Suganya; Westerdale, Sarah; Johnston, Stephen; Gao, Robert X. |
Report |
Oct 1, 2010 |
6150 |
Numerical modeling of nonisothermal polymer crystallization kinetics: flow and thermal effects. |
Zinet, Matthieu; Otmani, Rabie El; Boutaous, M'hamed; Chantrenne, Patrice |
Report |
Oct 1, 2010 |
10382 |
Flow/pressure characteristics and modeling of deformation processes of single-screw extruders. |
Borisov, A.A.; Berdyshev, B.V.; Hosseini, H.; Shirkavand-Hadavand, B. |
Report |
Oct 1, 2010 |
2751 |
Orthogonal design study on factors effecting on fibers diameter of melt electrospinning. |
Liu, Yong; Deng, Rongjian; Hao, Mingfeng; Yan, Hua; Yang, Weimin |
Report |
Oct 1, 2010 |
2773 |
Maize Response to Biodegradable Polymer and Urease Inhibitor Coated Urea. |
|
Report |
Sep 30, 2010 |
3494 |
Researchers Find Monomeric Factor behind Polymer Nanocomposites' Strength. |
|
|
Sep 6, 2010 |
311 |
Effect of applied voltage on surface and volume charge density of the jet in electrospinning of polyacrylonitrile solutions. |
Fallahi, D.; Rafizadeh, M.; Mohammadi, N.; Vahidi, B. |
Report |
Jul 1, 2010 |
3328 |
Section II: Chemistry. |
Moomaw, Ellen W. |
|
Mar 22, 2010 |
2579 |
Cure advancement of urethane networks using a sigmoidal chemorheological model. |
Teyssandier, F.; Love, B.J. |
Report |
Mar 1, 2010 |
2932 |
In Japan. |
|
Brief article |
Mar 1, 2010 |
147 |
A joint study by the European Bioplastics Association and the European Polysaccharide Network of Excellence estimates that biobased polymers could replace up to 90% of current global plastics consumption. |
|
Brief article |
Jan 1, 2010 |
176 |
Rheological behavior of polydispersed bubble suspensions in shear flows. |
Joh, Sung Wu; Lee, Seung Hwan; Youn, Jae Ryoun |
Report |
Jan 1, 2010 |
5988 |
Selectivity of allylic coagent-mediated polypropylene maleation. |
Sengupta, Saurav S.; Parent, J. Scott; Chaudhary, Bharat I. |
Technical report |
Oct 1, 2009 |
2923 |
Melt processing and rheology of an acrylonitrile copolymer with absorbed Carbon Dioxide. |
Wilding, Matthew D.; Baird, Donald G. |
Technical report |
Oct 1, 2009 |
9879 |
Thermography aids development of laser transmission welding. |
Jaeschke, Peter; Herzog, Dirk; Hustedt, Michael |
|
Jul 1, 2009 |
3942 |
Comparison of oil-in-oil, water-in-oil-in-water and melt encapsulation techniques for the preparation of controlled release B12 poly (e-caprolactone) microparticles. |
Ramesh, D. Vijaya |
Report |
May 1, 2009 |
6833 |
Light could heal material wounds: chitosan-related compound allows coating to repair itself. |
Ehrenberg, Rachel |
|
Apr 11, 2009 |
335 |
Surface characterization of air plasma treated poly vinylidene fluoride and poly methyl methacrylate films. |
Pawde, S.M.; Deshmukh, Kalim |
Report |
Apr 1, 2009 |
6859 |
Molecularly imprinted polymers: a new approach to the preparation of functional materials/molekulaarselt jaljendatud polumeerid--uus valjund funktsionaalsete materjalide valmistamiseks. |
Opik, Andres; Menaker, Anna; Reut, Jekaterina; Syritski, Vitali |
Report |
Mar 1, 2009 |
4933 |
Effect of cellulose concentration in NMMO * [H.sub.2]O solution on prediction of MW and MWD of cellulose using a rheology-based method. |
Zhang, Huiru; Liu, Xiaoyun; Li, Dongshuang; Li, Rongxian |
Technical report |
Mar 1, 2009 |
3215 |
The effect of hyperbranched polymers on processing and thermal stability of biodegradable polyesters. |
Shaked, Yanir; Dodiuk, Hanna; Kenig, Samuel; McCarthy, Stephen |
Technical report |
Mar 1, 2009 |
4023 |
The rheological modification of talc-filled polypropylene by epoxy-polyester hybrid resin and its effect on morphology, crystallinity, and mechanical properties. |
Jahani, Yousef; Ehsani, Morteza |
Technical report |
Mar 1, 2009 |
6318 |
Evolution of rheological properties and morphology development during crosslinking of polyolefin elastomers and their TPV blends with polypropylene. |
Li, Zuning; Kontopoulou, Marianna |
Technical report |
Jan 1, 2009 |
5559 |
Rheological study of aqueous dispersions of in situ gelable thermosensitive polymer nanogels. |
Wang, Qin; Xu, Huibi; Yang, Xiangliang; Yang, Yajiang |
Report |
Jan 1, 2009 |
3026 |
Effect of thermomechanical history on the crystallization of poly(ether-block-amide). |
Tavernier, Bruno; Mewis, Jan; Puyvelde, Peter Van; Takenaka, Mikihito; Ernst, Benoit; Hashimoto, Tak |
Technical report |
Dec 1, 2008 |
4756 |
Chemorheological characterization of thermosetting polyurethane formulations containing different chain extender contents. |
Haddadi, Hamed; Nazockdast, Ehssan; Ghalei, Behnam |
Technical report |
Dec 1, 2008 |
4978 |
Correlation of the melt rheological properties with the foaming behavior of immiscible blends of poly(2,6-dimethyl-1,4-phenylene ether) and poly(styrene-co-acrylonitrile). |
Ruckdaschel, Holger; Rausch, Julius; Sandler, Jan K.W.; Altstadt, Volker; Schmalz, Holger; Muller, A |
Technical report |
Nov 1, 2008 |
9085 |
Polyester containing isocyanate groups--modified epoxy resin: rheological, dynamic-mechanical, and impact properties. |
Soares, Bluma G.; Goncalez, Viviane; Galimberti, Rurik; Barcia, Fabio L.; Sirqueira, Alex S. |
Technical report |
Oct 1, 2008 |
2985 |
Rheological and thermal properties of ethylene-styrene copolymers. |
Marques, Maria de Fatima Vieira; Moraes, Luanda Silva de |
Technical report |
Oct 1, 2008 |
1691 |
Rheological characterization of starch derivatives/polycaprolactone blends processed by reactive extrusion. |
Bossard, Frederic; Pillin, Isabelle; Aubry, Thierry; Grohens, Yves |
Technical report |
Sep 1, 2008 |
4794 |
Linear and nonlinear melt-state viscoelastic properties of polypropylene/organoclay nanocomposites. |
Nazockdast, Ehssan; Nazockdast, Hossein; Goharpey, Fatemeh |
Technical report |
Jul 1, 2008 |
5981 |
A new method for producing high melt strength polypropylene with reactive extrusion. |
Tang, Hongxia; Dai, Wenli; Chen, Baiquan |
Technical report |
Jul 1, 2008 |
2902 |
Rheological characterization of room temperature vulcanized silicone sealant: effect of filler particle size. |
Xu, Xiaoming; Gao, Chuanhua; Zheng, Qiang |
Technical report |
Apr 1, 2008 |
2910 |
Effects of welding procedures on mechanical and morphological properties of hot gas butt welded PE, PP, and PVC sheets. |
Balkan, Onur; Demirer, Halil; Ezdesir, Ayhan; Yildirim, Huseyin |
Technical report |
Apr 1, 2008 |
8964 |
Yield stress and rheological characterization of the low shear zone of an epoxy molding compound for encapsulation of semiconductor devices. |
Yoshii, Masaki |
Technical report |
Apr 1, 2008 |
4037 |
Cellulose that stiffens and softens. |
Callaway, Ewen |
|
Mar 15, 2008 |
219 |
The effect of recycling on LDPE foamability: elongational rheology. |
Kabamba, Eddy Twite; Rodrigue, Denis |
Technical report |
Jan 1, 2008 |
4460 |
The experimental observation and numerical modeling of cast film deformation using novel capillary markers. |
Hallmark, Bart |
Technical report |
Jan 1, 2008 |
9461 |
Prediction of molecular weight scale and molecular weight distribution of cellulose using a rheology-based method. |
Zhang, Huiru; Tong, Mingwei; Li, Rongxian |
Technical report |
Jan 1, 2008 |
3062 |
Green polymers are big business in Latin America: petrochemical giant Braskem's CEO Jose Carlos Grubisich has a compelling vision for Brazil: "It will be to green polymers what the Middle East is to polymers made from nonrenewable resources.". |
Florez, Laura |
Cover story |
Jan 1, 2008 |
1808 |
Molecular, rheological, and crystalline properties of low-density polyethylene in blown film extrusion. |
Majumder, Khokan Kanti; Hobbs, Graham; Bhattacharya, Sati N. |
Technical report |
Dec 1, 2007 |
4800 |
The effect of epoxy-polyester hybrid resin on mechanical properties, rheological behavior, and water absorption of polypropylene wood flour composites. |
Jahani, Yousef |
Technical report |
Dec 1, 2007 |
4703 |
Rheological, mechanical and thermal properties of propylene-ethylene block copolymer/polyalphaolefins blends. |
Ha, H.S.; Kang, M.C.; Cho, H.H.; Kim, B.K. |
Technical report |
Nov 1, 2007 |
3132 |
Influence of epoxy resin on the morphological and rheological properties of PBT/ABS blends compatibilized by ASMA. |
Yao, Zengzeng; Lin, Mei; Zhou, Jing; Wang, Haitao; Zhong, Wei; Du, Qiangguo |
Technical report |
Nov 1, 2007 |
4005 |
The effect of multiwall carbon nanotube on the crystallization, morphology, and rheological properties of nylon 1010 nanocomposites. |
Wang, Biao; Sun, Guangping; He, Xiaofeng; Liu, Jingjiang |
|
Oct 1, 2007 |
7331 |
Rheological characterization of HDPE/sisal fiber composites. |
Mohanty, Smita; Nayak, Sanjay K. |
|
Oct 1, 2007 |
5271 |
Curing behavior of urea-formaldehyde resin modified with cooking waste oil-based pMDI prepolymer and its influence on particleboard properties. |
Kang, Eun-Chang; Park, Sang-Bum; Sun, Xiuzhi Susan; Park, Byung-Dae; Park, Heon |
|
Jun 1, 2007 |
6574 |
Effect of the separation of Coulomb centers on the activation energy in electronic hopping transport: a reinterpretation in poly-N-vinylcarbazole. |
Santos, S.; Caraballo, D. |
|
May 1, 2007 |
3590 |
Effect of clay on the morphology of binary blends of polyamide 6 with high density polyethylene and HDPE-graft-acrylic acid. |
Fang, Zhengping; Xu, Yuzhen; Tong, Lifang |
|
May 1, 2007 |
4106 |
Modeling particle inflation from poly(amic acid) powdered precursors. I. preliminary stages leading to bubble growth. |
Cano, Camilo I.; Kyu, Thein; Pipes, R. Byron |
|
May 1, 2007 |
7333 |
Modeling particle inflation from poly(amic acid) powdered precursors. II. morphological development during bubble growth. |
Cano, Camilo I.; Clark, Meaghan L.; Kyu, Thein; Pipes, R. Byron |
|
May 1, 2007 |
6050 |
Rubber-toughened polypropylene/acrylonitrile-co-butadiene-co-styrene blends: morphology and mechanical properties. |
Slouf, Miroslav; Kolarik, Jan; Kotek, Jiri |
|
May 1, 2007 |
6028 |
Predictions of two nonlinear viscoelastic constitutive relations for polymers under multiaxial loadings. |
Ellyin, F.; Vaziri, R.; Bigot, L. |
|
May 1, 2007 |
5899 |
Superabsorbent composite. XIII. Effects of [Al.sup.3+]-attapulgite on hydrogel strength and swelling behaviors of poly(acrylic acid)/[Al.sup.3+]-attapulgite superabsorbent composites. |
Zhang, Junping; Zhao, Yaogang; Wang, Aiqin |
|
May 1, 2007 |
4025 |
Wear of Poly (methyl methacrylate) against a metallic surface in dry conditions. |
Geringer, Jean; Forest, Bernard; Combrade, Pierre |
|
May 1, 2007 |
7250 |
Computer simulation of reactive extrusion processes for free radical polymerization. |
Jia, Yuxi; Zhang, Guofang; Wu, Lili; Sun, Sheng; Zhao, Guoqun; An, Lijia |
|
May 1, 2007 |
4911 |
Corn-based absorbent dries soggy books. |
Suszkiw, Jan |
|
May 1, 2007 |
1519 |
Bioengineering to the rescue. |
Milo, Paul |
Editorial |
May 1, 2007 |
618 |
Synthesis, photophysical properties, and electron paramagnetic resonance studies of new poly(bisbenzothiazole)s containing bulky pendant groups. |
Huang, Wei; Yin, Jie |
|
Apr 1, 2007 |
5705 |
Effects of processing parameters on the filament fiber diameter of spunbonded nonwoven fabrics. |
Zhao, Bo |
|
Apr 1, 2007 |
3138 |
Rheology studies of foam flow during injection mold filling. |
Qin, X.; Thompson, M.R.; Hrymak, A.N. |
|
Apr 1, 2007 |
4419 |
A two-station embossing process for rapid fabrication of surface microstructures on thermoplastic polymers. |
Yao, Donggang; Nagarajan, Pratapkumar; Li, Lei; Yi, Allen Y. |
|
Apr 1, 2007 |
4658 |
Linear polymers with sulfur in the main chain. IV. synthesis of thermotropic liquid-crystalline polythioesters based on 4,4'-biphenyldithiol with excellent adhesive properties. |
Hirano, Hiroshi; Kadota, Joji; Agari, Yasuyuki; Harada, Toshihiko; Tanaka, Mitsuaki; Hasegawa, Kiich |
|
Mar 1, 2007 |
4719 |
Reprocessing acrylonitrile-butadiene-styrene plastics: structure-property relationships. |
Bai, Xiaojuan; Isaac, D.H.; Smith, K. |
|
Feb 1, 2007 |
5447 |
Microdielectric analysis and curing kinetics of an epoxy resin system. |
Chen, Jihua; Hojjati, Mehdi |
|
Feb 1, 2007 |
5111 |
Interfacial characteristics of film insert molded polycarbonate film/polycarbonate-acrylonitrile-butadiene-styrene substrate, Part 1: influence of substrate molecular weight and film thickness. |
Leong, Y.W.; Ishiaku, U.S.; Kotaki, M.; Hamada, H.; Yamaguchi, S. |
|
Dec 1, 2006 |
4135 |
Comparison of the effect of epoxy microspheres on the thermomechanical and rheological properties of an epoxy resin system. |
Ambrogi, Veronica; Cosco, Simona; Carfagna, Cosimo; Cicala, Gianluca; Oliveri, Ludovica; Recca, Anto |
|
Dec 1, 2006 |
4954 |
Degradation of a wood-plastic composite exposed under tropical conditions. |
Schauwecker, Christoph; Morrell, Jeffrey J.; McDonald, Armando G.; Fabiyi, James S. |
|
Nov 1, 2006 |
5032 |
Rapid production of micropatterned surfaces using a fluid dynamical instability. |
Loher, Stefan; Stark, Wendelin J.; Maienfisch, Tobias; Bokorny, Stefan; Grimm, Wolfgang |
|
Nov 1, 2006 |
4225 |
DNA-Biopolymer Photonics Program. |
Rhode, Torsten |
Brief article |
Oct 1, 2006 |
274 |
Influence of polymer type and structure on polymer modified asphalt concrete mix. |
Hussein, Ibnelwaleed A.; Al-Abdul Wahhab, Hamad I.; Iqbal, Mohammad H. |
|
Aug 1, 2006 |
5276 |
Ethylene propylene diene terpolymer/ethylene vinyl acetate/layered silicate ternary nanocomposite by solution method. |
Acharya, H.; Srivastava, S.K.; Bhowmick, Anil K. |
|
Jul 1, 2006 |
3255 |
Phase separation in polypropylene and metallocene polyethylene blends. |
Razavi-Nouri, Mohammad; Hay, James N. |
|
Jul 1, 2006 |
3345 |
Plastic shaping by means of IR heating and direct pellet molding. |
Quadrini, Fabrizio; Santo, Loredana; Tagliaferri, Vincenzo; Trovalusci, Federica |
|
Jul 1, 2006 |
3887 |
High-frequency proximity heating for injection molding applications. |
Yao, Donggang; Kimerling, Thomas E.; Kim, Byung |
|
Jul 1, 2006 |
5285 |
Creativity drives Goerges. |
Fraumeni, Paul |
|
Jun 1, 2006 |
552 |
Theoretical and experimental studies of anisotropic shrinkage in injection moldings of semicrystalline polymers. |
Kwon, Keehae; Isayev, A.I.; Kim, K.H.; van Sweden, C. |
|
Jun 1, 2006 |
10349 |
EU new polymer foam research. |
Nuthall, Keith |
|
Jun 1, 2006 |
215 |
Bubble coalescence in foaming process of polymers. |
Taki, Kentaro; Tabata, Kazuhide; Kihara, Shin-ichi; Ohshima, Masahiro |
|
May 1, 2006 |
6399 |
Effect of mixing protocol on compatibilized polymer blend morphology. |
Lin, Bin; Sundararaj, Uttandaraman; Guegan, Philippe |
|
May 1, 2006 |
6735 |
Clathrate hydrates--icy fuel thawed with antifreeze proteins. |
|
|
May 1, 2006 |
673 |
Nonisothermal comprehensive 3D analysis of polymer melt flow in a coat-hanger die. |
Wu, Tingqi; Jiang, Bo; Xu, Shuhua; Bi, Chao |
|
Apr 1, 2006 |
4844 |
Finite strain 3D thermoviscoelastic constitutive model for shape memory polymers. |
Diani, Julie; Liu, Yiping; Gall, Ken |
|
Apr 1, 2006 |
4609 |
The draw ratio-Deborah number diagram: a useful tool for coating applications. |
Bourrigaud, S.; Marin, G.; Dabas, V.; Dupuy, C.; Silagy, D. |
|
Mar 1, 2006 |
5577 |
Effect of process parameters on fungal resistance of MDF panels. |
Deng, James; Yang, Dian-Qing; Geng, Xinglian |
|
Mar 1, 2006 |
4591 |
Experimental investigation of adhesive meltblown web production using accessory air. |
Wang, Xiaomei; Ke, Qinfei |
|
Jan 1, 2006 |
2764 |
Crystallization kinetics of poly(trimethylene terephthalate)/poly(ether imide) blends. |
Chiu, Hsiu-Jung; Shu, Wei-Jye; Huang, Jieh-Ming |
|
Jan 1, 2006 |
4006 |
Plasticization effects on bubble growth during polymer foaming. |
Chen, Xiaopeng; Feng, James J.; Bertelo, Christopher A. |
|
Jan 1, 2006 |
7611 |
Effects of injection-molding conditions on the gloss and color of pigmented polypropylene. |
Pisciotti, Francesco; Boldizar, Antal; Rigdahl, Mikael; Arino, Ingrid |
|
Dec 1, 2005 |
6718 |
Minimum wet thickness for double-layer slide-slot coating of poly(vinyl-alcohol) solutions. |
Lin, Yao-Nan; Liu, Ta-Jo; Hwang, Shyh-Jye |
|
Dec 1, 2005 |
4750 |
New description of viscoelasticity that can be applied to mechanical properties such as constant strain rate, creep, and stress relaxation analysis. |
Sudduth, Richard D. |
|
Dec 1, 2005 |
2458 |
Fabrication and characterization of biodegradable poly(lactic acid)/layered silicate nanocomposites. |
Wu, Tzong-Ming; Chiang, Ming-Feng |
|
Dec 1, 2005 |
3067 |
The effect of the volume fraction of dispersed phase on toughness of injection molded polypropylene blended with SEBS, SEPS, and SEP. |
Matsuda, Yushi; Hara, Masao; Mano, Tsuyoshi; Okamoto, Kenzo; Ishikawa, Masaru |
|
Dec 1, 2005 |
4155 |
Bayer MaterialScience expands Shanghai Polymer R&D Center. |
|
|
Dec 1, 2005 |
130 |
High-strength and low-stiffness composites of nanoclay-filled thermoplastic polyurethanes. |
Pattanayak, Asim; Jana, Sadhan C. |
|
Nov 1, 2005 |
5429 |
Quantitative study of shrinkage and warpage behavior for microcellular and conventional injection molding. |
Kramschuster, Adam; Cavitt, Ryan; Ermer, Donald; Chen, Zhongbao; Turng, Lih-Sheng |
|
Oct 1, 2005 |
6643 |
Thermal strategy for the separation of a polymer mixture. |
Saito, Takushi; Satoh, Isao |
|
Oct 1, 2005 |
3810 |
How hot was it? |
|
Brief Article |
Sep 17, 2005 |
305 |
Sorption behavior in polymers above [T.sub.g]: relations between mechanical properties and swelling in limonene. |
Ritums, J.E.; Hedenqvist, M.S.; Bergman, G.; Prodan, T.; Emri, I. |
|
Sep 1, 2005 |
5917 |
Validation of the reciprocity law for coating photodegradation. |
Martin, Jonathan |
|
Jul 1, 2005 |
5623 |
Shape shifter. |
|
Brief Article |
May 7, 2005 |
195 |
Study on squeezing flow during nonisothermal embossing of polymer microstructures. |
Yao, Donggang; Virupaksha, Vinayshankar L.; Kim, Byung |
|
May 1, 2005 |
4822 |
Tailoring HASE rheology through polymer design: effects of hydrophobe size, acid content, and molecular weight. |
Shay, Greg D. |
|
Apr 1, 2005 |
7510 |
Lanthanide metal chemistry: catalysis of biodegradable and biofriendly polymers. |
Binda, Pascal; Dugah, Divine; Nelson, Chassidy; Delbridge, Ewan |
Brief article |
Apr 1, 2005 |
279 |
Remembering, on the cheap. |
|
Brief Article |
Mar 19, 2005 |
151 |
Studies on atom transfer radical emulsion polymerization of n-butyl methacrylate. |
Peng, Hui; Cheng, Shiyuan; Fan, Zhiqiang |
|
Mar 1, 2005 |
2972 |
The rotational molding of a thermotropic liquid crystalline polymer. |
Scribben, Eric; Baird, Donald |
|
Mar 1, 2005 |
8819 |
Poly(ester-urethane)s synthesized using polyoxalate diols. |
Tanaka, Hideho; Adachi, Fumio; Kunimura, Masaru; Kurachi, Kohichiro |
|
Feb 1, 2005 |
5583 |
Nanocomposite systems based on unsaturated polyester and organo-clay. |
Mironi-Harpaz, I.; Narkis, M.; Siegmann, A. |
|
Feb 1, 2005 |
7076 |
Transient shear rheology and rheo-optical microstructural characterization of a thermotropic liquid crystalline polymer. |
Guo, Tianren; Harrison, Graham M.; Ogale, Amod A. |
|
Feb 1, 2005 |
5161 |
Mechanical properties of polymer-ceramic nanocomposite coatings by depth-sensing indentation. |
Sun, Jiakuan; Francis, Lorraine F.; Gerberich, William W. |
|
Feb 1, 2005 |
6057 |
Influence of hydroxyl functionalized hyperbranched polymers on the thermomechanical and morphological properties of epoxy resins. |
Cicala, G.; Recca, A.; Restuccia, C. |
|
Feb 1, 2005 |
4920 |
Temporary networks in polymer-modified asphalts. |
Polacco, Giovanni; Stastna, Jiri; Vlachovicova, Zora; Biondi, Dario; Zanzotto, Ludovit |
|
Dec 1, 2004 |
6762 |
Polymer crystallization kinetics, master quotients, master curves and Nakamura-Ozawa-equations of iPP and PTFE. |
Lambrigger, Markus |
|
Dec 1, 2004 |
5903 |
Design of calibrators for extruded profiles. Part I: modeling the thermal interchanges. |
Nobrega, J.M.; Carneiro, O.S.; Covas, J.A.; Pinho, F.T.; Oliveira, P.J. |
|
Dec 1, 2004 |
7119 |
Cyclic deformation behavior of an epoxy polymer. Part I: experimental investigation. |
Shen, Xinghe; Xia, Zihui; Ellyin, Fernand |
|
Dec 1, 2004 |
3400 |
Fate of erucamide in polyolefin films at elevated temperature. |
Shuler, Christopher A.; Janorkar, Amol V.; Hirt, Douglas E. |
|
Dec 1, 2004 |
3629 |
A time-scale approach for analysis of coalescence in processing flows. |
Perilla, Jairo E.; Jana, Sadhan C. |
|
Dec 1, 2004 |
8118 |
Experimental studies on radial extrudate swell and velocity profiles of flowing PS melt in an electro-magnetized die of an extrusion rheometer. |
Intawong, N-T.; Sombatsompop, N. |
|
Dec 1, 2004 |
5410 |
Study of the miscibility and mechanical properties of NBR/HNBR blends. |
Hussein, Ibnelwaleed A.; Chaudhry, Rehan A.; Sharkh, Basel F. Abu |
|
Dec 1, 2004 |
3803 |
In-situ ultrasonic compatibilization of unvulcanized and dynamically vulcanized PP/EPDM blends. |
Feng, Wenlai; Isayev, A.I. |
|
Nov 1, 2004 |
3869 |
Strain hardening in polypropylenes and its role in extrusion foaming. |
Spitael, Pieter; Macosko, Christopher W. |
|
Nov 1, 2004 |
6240 |
Rohm and Haas consortium awarded $3.75 million DOE grant to develop new low-voc paint technology. |
|
|
Nov 1, 2004 |
324 |
Horizons made to order. |
Corneliussen, Roger D. |
|
Nov 1, 2004 |
1129 |
Measurement and prediction of diffusion coefficients of supercritical C[O.sub.2] in molten polymers. |
Areerat, Surat; Funami, Eita; Hayata, Yusuke; Nakagawa, Dai; Ohshima, Masahiro |
|
Oct 1, 2004 |
7120 |
Runner balancing by a direct genetic optimization of shrinkage. |
Alam, Kevin; Kamal, Musa R. |
|
Oct 1, 2004 |
7773 |
A parallel coextrusion technique for simultaneous measurements of radial die swell and velocity profiles of a polymer melt in a capillary rheometer. |
Intawong, N.-T.; Sombatsompop, N. |
|
Oct 1, 2004 |
6786 |