Replacement of a Missing Maxillary Central Incisor.
Dr. Fady Abillam
Dr. Elie Azar Mlouf
Dr. Fatme Mouchref Hamasny
Dr. Ramzi Abou Arraj
Background: An 18 year old female patient presented for implant placement at the site of a congenitally missing right maxillary central incisor. The clinical examination revealed an insufficient buccolingual width of the edentulous ridge, requiring a horizontal bone augmentation procedure prior to implant placement. Methods: An autogenous bone block graft was harvested from mandibular symphysis, fixed on buccal aspect of edentulous crest with titanium miniscrews, covered first by autogenous bone chips and xenograft particles, and second with a resorbable barrier membrane. Four months later, an Astra TechA implant was placed in the grafted site, surrounded by a thick buccal bony wall, demonstrating excellent primary stability and guaranteeing a better esthetic outcome. Impressions for prosthetic work were taken and final restoration cemented 3 months following implant placement.
Autogenous bone block grafting is regarded as a predictable procedure, especially in horizontal bone augmentation from intra-oral sites. Many requirements have to be respected however in order to achieve this purpose. In addition, tim- ing of implant placement with autogenous block grafts is a subject of controversy. Finally, implant placement in anterior maxilla has to meet guide- lines proposed in the literature to avoid esthetic shortcomings.
Conclusion: This case report describes the successful replacement of an anterior missing tooth with an AstraA implant after a buccolingual augmentation of the edentulous ridge.
The ability to successfully replace single or multiple missing teeth with osseointegrated dental implants has revolutionized dentistry over the past four decades. Consistent long-term results have been reported in the literature (Adell et al., 1990; Albrektsson et al., 1986; Lekholm et al., 1994). Nevertheless, dental implant therapy can be complicated by numerous local factors, namely the anatomy of the edentulous ridge. An inadequate bone volume, either in height or in width, renders the placement of implants rather difficult, especially in areas of high esthetic demands. Various bone augmentation techniques have been described in the literature in order to reconstruct deficient alveolar ridges such as particulate bone grafting, guided bone regeneration, autogenous bone block graft, ridge expansion, and alveolar distraction osteogenesis (McAllister and Haghighat, 2007; Chiapasco et al., 2006 & 2007; Esposito et al., 2006). The pur- pose of this clinical report is to describe a case of single implant placement in maxillary right central incisor region following horizontal bone augmentation using an autogenous block graft in a young female patient.
An 18 year old female patient was referred by the Department of Orthodontics to the Depart- ment of Periodontology (at the Lebanese University School of Dentistry) because of a missing maxillary right central incisor.
The patient had just completed her orthodontic treatment and a removable maxillary retainer was fabricated to maintain the space as well as to temporarily replace the missing tooth.
In addition, the Department of Orthodontics and Dentofacial Orthopedics approved the initiation of surgical procedures after examining a hand wrist radiograph in order to confirm the end of growth. The questionnaire and the patient's file revealed that this central incisor was congenitally missing. An extra-oral examination was first carried out, demonstrating a low lip line, facial symmetry and a well aligned dental midline. Then, intra-oral examination of the edentulous space showed a well managed space to symmetrically replace the missing right central incisor accord- ing to the left central incisor, a narrow alveolar crest indicating a horizontal bone loss at the site of the missing tooth.
A periodontal probe (Michigan probe, HuFriedy, IL, USA) was then used under local analgesia to assess buccolingual width of bone crest, after subtracting the thicknesses of buccal and lingual soft tissues from total buccolingual width of the ridge at top of the crest. These measurements displayed an approximate horizontal bone thick- ness of 3 mm. However, optimal implant placement required a buccal bone thickness of at least 1 mm to avoid esthetic shortcomings, i.e. gingival recession (Belser et al., 1998; Chiapasco et al., 1999; Buser et al., 2004). Therefore, it was decided to perform a horizontal bone augmentation procedure using an autogenous block graft prior to implant placement in a staged approach. Moreover, a peri-apical radiograph revealed a sufficient height of bone.
Onlay Bone Block Grafting
Patient was instructed to perform a mouthrinse with a 0.12% solution of chlorhexidine-diglu- conate for 1 minute with a 10 ml solution immediately prior to surgery. Local analgesia (2% lidocaine with 1:100000 epinephrine) was ad- ministered in the area of the maxillary edentulous crest as well as in the interforaminal region of anterior mandible.
Full-thickness buccal and palatal mucoperiosteal flaps with 2 buccal vertical releasing incisions were first raised at the recipient site. The direct measurement using a periodontal probe (Michigan probe, HuFriedy, IL, USA) confirmed the pre-operative buccolingual width evaluation. Then, a template was used and adjusted at the recipient bed to assess the dimensions of the block graft to be harvested. Subsequently, a horizontal incision was made at mucogingival junction from cuspid to cuspid at mandibular symphysis region and a full-thickness (mucoperiosteal) flap was raised.
Right and left mental nerves were identified and protected and the adjusted template was used to outline the corticocancellous block with a fissure bur used on a straight handpiece, under copious irrigation with sterile saline.
Following ostectomy, a 14x6x5 mm bone block was removed with fine straight chisels while preserving the lingual cortex. Further cancellous bone chips were harvested with surgical curettes and the donor site filled with haemostatic mate- rial (CutanplastA, Milan, Italy) to minimize hematoma formation. Next, the flap was sutured back to its original position using an interlocked continuous suture technique. At the recipient site, the block graft was adjusted to achieve better adaptability and decrease micro- movements. A round bur was used to perforate the buccal cortex of the recipient bed in order to promote bleeding and the block was fixed with 2 titanium miniscrews (StraumannA, Switzer- land) after smoothening of its sharp edges.
Cancellous bone chips collected from donor site were mixed with xenograft bone particles (Bio- OssA, Geistlich, Switzerland) and were used to fill the gap around the bone block.
Then, a resorbable membrane (Bio-GideA, Geistlich, Switzerland) was placed in a double layer technique to cover both the block graft and bone particles.
Periosteal releasing incisions allowed a coronal displacement of the buccal flap enough to close the wound, using mattress and tension-free simple interrupted resorbable sutures (3/0 VicrylA)
Antibiotic (AugmentinA 625mg TID for one week) and anti-inflammatory (BrufenA 400mg TID in case of pain) drugs were administered following surgery. Mouthrinses with a 0.12% solution of chlorhexidindigluconate were started again 24 hours after surgery and continued for 2 weeks. The maxillary removable retainer was adjusted to avoid pressure over the grafted site and sutures were removed 10 days post-operatively. Implant Placement Four months later, patient re- turned to the Department of Periodontology for implant placement
Immediately prior to starting surgery, patient was asked to use a mouthrinse (Chlorhexidine digluconate 0.12%) for 3 minutes, and local analgesia (2% lidocaine with 1:100000 epinephrine) was administered in the grafted maxillary area. Similar to the previous procedure, crestal, intrasulcular and vertical releasing incisions were made and full-thickness buccal and palatal mucoperiosteal flaps were raised. The grafted region demonstrated an adequate horizontal bone augmentation of approximately 7 mm with some resorption at coronal level with no considerable effect on the outcome of therapy.
Next, the 2 titanium miniscrews were removed, a 2mm twist drill was then used to the length of 13mm followed by verification with the direction indicator.
Then, the 2.5 mm Tiger drill was used to the length of 13 mm, followed by the intermediate Pilot drill, and finally the 3.2 mm Tiger drill followed by the 3.5mm cortical drill. The Direction Indicator was used at all times to guide implant positioning both mesiodistally and buccolingully.
The 3-dimensional implant placement was per- formed in respect to the guidelines proposed in the literature (Buser et al., 2004). Subsequently, a 3.5 x 13 mm Astra TechA implant was re- moved from its sterile container and delivered to the drilling site by first using the Delivery Cap and later the Torque Wrench until its rough surface was fully submerged in bone.
The implant carrier was released using the Torque Wrench in a counterclockwise direction with the Combination Wrench and a 3.5 mm cover screw placed on top of the implant. Finally, the mucoperiosteal flaps were sutured in their original position.
Post-operative medications were prescribed similarly to previous surgery and sutures were removed 1 week after.
Three months after implant placement, uncover- ing of the implant was performed and a healing screw replaced the cover screw. Three weeks later, abutment choice and impressions were made for prosthesis fabrication at the Lebanese University School of Dentistry Department of Prosthodontics. After another 3 weeks, the crown was cemented in place demonstrating an excellent immediate esthetic outcome and after a follow-up period of 1 month and 2 years.
Insufficient width of alveolar crest has led to the application of different grafting techniques.
Autogenous block grafting is a well documented procedure, either from intra-or extra-oral sites (McAllister and Haghighat 2007; Chiapasco et al., 2006). Horizontal bone augmentation, in particular, is considered a predictable approach with onlay bone grafts (Buser et al., 1996; Misch, 1997). Available intra-oral donor sites include mandibular symphysis, mandibular ramus and mandibular external oblique ridge (Proussaefs et al., 2002; Misch, 2000). Pre-requisites for the success of this therapy are the intimate contact and stabilization of the block graft to the recipient bed (de Carvalho et al., 2000; Urbani et al., 1998), and the cortical perforation with intra-marrow penetration of the defect site to increase the rate of re-vascularization and re- modeling (Majzoub et al., 2000; de Carvalho, 2000). The amount of bone resorption of intra- oral (chin and mandibular ramus) onlay block grafts has been reported to vary between 5 and 10% (Chiapasco et al., 1999; Raghoebar et al., 2000; Jemt and Lekholm, 2003). However, the use of barrier membranes in combination with block grafts seems to minimize the rate of bone resorption (McAllister and Haghighat, 2007; Chiapasco et al., 2006).
The timing of implant placement in grafted sites has been a subject of controversy. Many authors24,25 advocated an immediate implant placement in conjunction with intra-oral onlay grafting procedure in order to reduce the risk of bone resorption that occurs, for the most part, shortly after graft fixation. Other authors22,23 recommended implant placement after a wait- ing period of 4 to 5 months of the grafting pro- cedure to permit a better primary stability and integration of the implant in a re-vascularized bone and to avoid an implant loss due to expo- sure or infection of the block graft (Chiapasco et al., 2006). Therefore, in areas of esthetic con- cern, it would be wiser to place the implants in a delayed approach for more predictable results.
Lateral bone augmentation of a narrow edentulous ridge, using autogenous block grafts, has shown to be a successful technique. Furthermore, if guidelines for implant placement in anterior maxilla are respected, excellent esthetic outcomes can be achieved. This case report demonstrated the ability to replace a congenitally missing tooth using an Astra TechA implant, 4 months following a ridge augmentation with anonlay block graft from mandibular symphysis.
1. ADELL R, ERIKSSON B, LEKHOLM U, BRANEMARK PI, JEMT T. A LONG-TERM FOLLOW-UP STUDY OF OSSEOINTEGRATED IMPLANTS IN THE TREATMENT OF TOTALLY EDENTULOUS JAWS. INT J ORAL MAXILLOFAC IMPLANTS 1990;5:347-359.
2. ALBREKTSSON T, ZARB G, WORTHINGTON PMD, ERIKSSON AR. THE LONG-TERM EFFICACY OF CUR- RENTLY USED DENTAL IMPLANTS: A REVIEW AND PROPOSED CRITERIA OF SUCCESS. INT J ORAL MAXILLOFAC IMPLANTS 1986;1:11-25.
3. BELSER UC, BUSER D, HESS D, SCHMID B, BERNARD JP, LANG NP. AESTHETIC IMPLANT RESTORA- TIONS IN PARTIALLY EDENTULOUS PATIENTS-A CRITICAL APPRAISAL. PERIODONTOL 2000 1998;17:132-150. 4. BUSER D, DULA K, HIRT HP, SCHENK RK. LATERAL RIDGE AUGMENTATION USING AUTOGRAFTS AND BARRIER MEMBRANES: A CLINICAL STUDY WITH 40 PARTIALLY EDENTULOUS PATIENTS. J ORAL MAXILLOFAC SURG 1996;54:420-432.
5. BUSER D, MARTIN W, BELSER UC. OPTIMIZING ESTHETICS FOR IMPLANT RESTORATIONS IN THE ANTERIOR MAXILLA: ANATOMIC AND SURGICAL CONSIDERATIONS. INT J ORAL MAXILLOFAC IMPLANTS 2004;19(SUP- PL):43-61.
6. CHIAPASCO M, ABATI S, ROMEO E, VOGEL G. CLINICAL OUTCOME OF AUTOGENOUS BLOCK GRAFTS OR GUIDED BONE REGENERATION WITH E-PTFE MEMBRANES FOR THE RECONSTRUCTION OF NARROW EDENTULOUS RIDGES. CLIN ORAL IMPL RES 1999;10:278-288.
7. CHIAPASCO M, ZANIBONI M, BOISCO M. AUGMENTATION PROCEDURES FOR THE REHABILITATION OF DEFICIENT EDENTULOUS RIDGES WITH ORAL IMPLANTS. CLIN ORAL IMPL RES 2006;17(SUPPL. 2):136-159. 8. CHIAPASCO M, ZANIBONI M, RIMONDINI L. AUTOGENOUS ONLAY BONE GRAFTS VS. ALVEOLAR DISTRAC- TION OSTEOGENESIS FOR THE CORRECTION OF VERTICALLY DEFICIENT RIDGES: A 2-4-YEAR PROSPECTIVE STUDY ON HUMANS. CLIN ORAL IMPL RES 2007;18:432-
9. DE CARVALHO PS, VASCONCELLOS LW, PI J. INFLUENCE OF BED PREPARATION ON THE INCORPORATION OF AUTOGENOUS BONE GRAFTS: A STUDY IN DOGS. INT J ORAL MAXILLOFAC IMPLANTS 2000;15:565-570. 10. ESPOSITO M, GRUSOVIN MG, COULTHARD P, WORTHINGTON HV. THE EFFICACY OF VARIOUS BONE AUGMENTATION PROCEDURES FOR DENTAL IMPLANTS: A COCHRANE SYSTEMATIC REVIEW OF RANDOMIZED CONTROLLED CLINICAL TRIALS. INT J ORAL MAXILLOFAC IMPLANTS 2006;21:696-710.
11. JEMT T, LEKHOLM U. MEASUREMENTS OF BUCCAL TISSUE VOLUMES AT SINGLE-IMPLANT RESTORATIONS AFTER LOCAL BONE GRAFTING IN MAXILLAE: A 3-YEAR CLINICAL PROSPECTIVE STUDY CASE SERIES. CLINICAL IMPLANT DENTISTRY RELATED RESEARCH 2003;5:63-70.
12. LEKHOLM U, VAN STEENBERGHE D, HERMANN I, BOLENDER C, FOLMER T, GUNNE J, HENRY P, HIGUCHI K, LANEY WR. OSSEOINTEGRATED IMPLANTS IN THE TREATMENT OF PARTIALLY EDENTULOUS JAWS; A PROSPECTIVE 5-YEAR MULTICENTER STUDY. INT J ORAL MAXILLOFAC IMPLANTS 1994;9:627-635.
13. MAJZOUB Z, BERENGO M, GIARDINO R, ALDINI NN, CORDIOLI G. ROLE OF INTRAMARROW PENETRA- TION IN OSSEOUS REPAIR: A PILOT STUDY IN THE RABBIT CALVARIA. J PERIODONTOL 1999;70:1501-1510. 14. MCALLISTER BS, HAGHIGHAT K. BONE AUGMENTATION TECHNIQUES. J PERIODONTOL 2007;78:377- 396.
15. MISCH CM. COMPARISON OF INTRAORAL DONOR SITES FOR ONLAY GRAFTING PRIOR TO IMPLANT PLACE- MENT. INT J ORAL MAXILLOFAC IMPLANTS 1997;12:767-776.
16. MISCH CM. USE OF MANDIBULAR RAMUS AS A DONOR SITE FOR ONLAY BONE GRAFTING. JOURNAL OF ORAL IMPLANTOLOGY; VOL.XXVI/NO. ONE/2000.
17. PROUSSAEFS P, LOZADA J, KLEINMAN A, ROHRER MD. THE USE OF RAMUS AUTOGENOUS BLOCK GRAFTS FOR VERTICAL ALVEOLAR RIDGE AUGMENTATION AND IMPLANT PLACEMENT: A PILOT STUDY. INT J ORAL MAXILLOFAC IMPLANTS 2002;17:238-248.
18. RAGHOEBAR GM, BATENBURG RHK, MEIJER HJA, VISSINK A. HORIZONTAL OSTEOTOMY FOR RECON- STRUCTION OF THE NARROW EDENTULOUS MANDIBLE. CLIN ORAL IMPL RES 2000;11:76-82.
19. SCHWARTZ-ARAD D, LEVIN L, SIGAL L. SURGICAL SUCCESS OF INTRAORAL AUTOGENOUS BLOCK ONLAY BONE GRAFTING FOR ALVEOLAR RIDGE AUGMENTATION. IMPLANT DENT. 2005 JUN;14(2):131-8.
20. URBANI G, LOMBARDO G, SANTI E, TARNOW D. LOCALIZED RIDGE AUGMENTATION WITH CHIN GRAFTS AND RESORBABLE PINS: CASE REPORTS. INT J PERIODONTICS RESTORATIVE DENT 1998;18:363-375.
21. VON ARX T, BUSER D. HORIZONTAL RIDGE AUGMENTATION USING BLOCK GRAFTS AND THE GUIDED BONE REGENERATION TECHNIQUE WITH COLLAGEN MEMBRANES: A CLINICAL STUDY WITH 42 PATIENTS. CLIN ORAL IMPLANTS RES. 2006 AUG;17(4):359-66.
22. JEMT T, LECKHOLM U. MEASUREMENTS OF BUCCAL TISSUE VOLUMES AT SINGLE-IMPLANT RESTORATIONS AFTER LOCAL BONE GRAFTING IN MAXILLAE: A 3-YEAR CLINICAL PROSPECTIVE STUDY CASES SERIES. CLINICAL IMPLANT DENT REL RES. 2003;5:63-70.
23. BECKTOR JP, ECKERT SE, ISAKSSON S, KELLER EE. THE INFLUENCE OF MANDIBULAR DENTITION ON IMPLANT FAILURES IN BONE-GRAFTED EDENTULOUS MAXILLAE. INT J ORAL MAXFAC IMPL. 2002;17:69-77. 24. NYSTREoM E, AHLQVIST J, GUNNE J, KAHNBERG KE. 10-YEAR FOLLOW-UP OF ONLAY BONE GRAFTS AND IMPLANTS IN SEVERELY RESORBED MAXILLAE. INT J ORAL MAXFAC IMPL. 2004;33:258-262.
25. VAN DER MEJJ EH, BLANKESTIJN J, BERMS RM, BUN RJ, JOVANOVIC A ET AL. THE COMBINATION OF TWO ENDOSTEAL IMPLANTS AND ILIAC CREST ONLAY GRAFTS IN THE SEVERELY ATROPHIC MANDIBLE BY A MODI- FIED SURGICAL APPROACH. INT J ORAL MAXFAC SURG. 2005;34:152-157.
Copyright 2014 - Dentalnews.com Provided by Syndigate.info , an Albawaba.com company
|Printer friendly Cite/link Email Feedback|
|Date:||Dec 30, 2013|
|Previous Article:||Effect of irrigation solutions on adhesion of Endorez sealer to root canal dentin.|
|Next Article:||Inauguration of Carestream Dental Training Centre for Knowledge and Care in Ajman UAE.|