Printer Friendly

Raising the bar in multi-component molding.

* Multi-component molding in North America makes up less than 10% of the injection molding business, but it is becoming a significant growth strategy for The Tech Group in Scottsdale, Ariz. "Rather than waiting for applications to come to us, which is what custom molders typically do, we are gathering the right technologies now to take our capability to a new level. We intend to push the multi-component envelope in the U.S.," says Bill Gerard, v.p. of operations. The company is investing in two technologies that could give it a lead in multi-component processing: all-electric presses and sophisticated turning-stack molds.

The Tech Group is one of the country's largest custom/contract injection molders. It has 11 molding operations with more than 300 machines, as well as three moldmaking facilities, in the Americas, Europe, and Asia. It serves medical, healthcare, and consumer markets from six plants in the U.S., Mexico, and Puerto Rico that generate revenues of $120 million and operate more than 200 injection presses from 17 to 400 tons.

The Tech Group's business in multi-component molding has been growing by 10% a year for the past few years and is up significantly since 2003. "Five years ago it was zero, but now it makes up a significant fraction of our sales volume in North America," says Gerard. This growth involves high-volume production of complex, tight-tolerance, multi-component parts. They are primarily hard/soft combinations where a soft-touch grip can add value to surgical instruments or ease the handling of pharmaceutical packaging like medicine bottles or consumer goods such as toothbrushes.

Going all-electric

"We have been running two-component hydraulic machines, but we have made a strategic decision to move toward all-electric machines for production of both single- and multi-component parts. The electric presses are very accurate, reliable and clean, and they are energy-saving," says Gerard.

In the last four years, The Tech Group purchased 47 all-electric Fanuc Roboshot presses from Milacron Inc., Batavia, Ohio. It also has nine multi-component machines in North America, and 11 in Europe. Only one is all-electric--a 330-ton Cincinnati Milacron Powerline model with two injection units. It was Milacron's first experience in building an all-electric multi-injection press in North America.

The electric two-component unit is located in Phoenix, Ariz., and a similar unit will soon be delivered to Cidra, Puerto Rico. Both presses are intended to serve new applications. "The all-electric press gives us an operational advantage, since the energy usage is cut nearly in half," Gerard says. "We now have a business plan to go after in-mold assembly and multi-component jobs and the two-component Powerline is a key part of our technology platform," he adds.

Making multi-molds

Another element of that strategy to push the limits of multi-component molding involves use of a relatively new type of high-tech mold. A new neighbor in Scottsdale is Gram Technology, a Danish firm that developed Spin Stack mold technology, which involves multiple four-faced, rotating stacks between the fixed and moving platens. That technology can accommodate injection of two or more materials as well as in-mold assembly and coating operations. The Tech Group, which builds about 25% of its tools inhouse, has taken a license from Gram to build Spin Stack molds.

"Use of multi-component molds has spurted from zero to 20% of the company's tooling output in just two years," says Gerard. "Our in-house tool-making strategy is to take on the molds that would be too risky or expensive for outside shops," says Gerard.
COPYRIGHT 2005 Gardner Publications, Inc.
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2005, Gale Group. All rights reserved. Gale Group is a Thomson Corporation Company.

Article Details
Printer friendly Cite/link Email Feedback
Title Annotation:Strategies
Author:Knights, Mikell
Publication:Plastics Technology
Date:May 1, 2005
Words:577
Previous Article:Suddenly, some price relief, loose supply.
Next Article:Industry datebook.


Related Articles
Automotive molder sees untapped potential for multicomponent molding.
Custom molders: take a shot at multi-component molding.
New TPE bonding technology and various overmolding processes for TPV applications. (Cover Story).
Stack moldes take on new tasks.
German foundry turns to air impulse molding system for upgrade. (Case History).
New molding & tooling technologies in the pipeline at Germany's IKV.
Liquid silicone rubbers.
Liquid silicone rubber.
Liquid silicone rubber.
Helping multi-shot molding taxi for takeoff.

Terms of use | Privacy policy | Copyright © 2020 Farlex, Inc. | Feedback | For webmasters