Printer Friendly

Protecting marine-side rising main.

On a recent Yorkshire Water contract J N Bentley of Skipton was faced with the complexity of replacing approximately 25m of a 350mm diameter rising main pipe at Whitby, which was situated within a shaft.

J N Bentley employed PMP Utilities of Burnley to install the rising main after using WINN & COALES (DENSO) SeaShield 80 system to provide protection from the sea water. To make the installation easier the SeaShield 80 was applied to the barrel lengths of the pipe prior to lifting the 25m long pipe into place. PMP Utilities then applied the system to the bolted flanges in-situ. SeaShield 80 System comprises Denso S105 Paste, Denso Marine Piling Tape, Densoclad Tape and Denso SeaShield Smart Band. Densyl Mastic was also used to profile the joints.

t| 020 8670 7511 e|

COPYRIGHT 2020 DFA Media Ltd.
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2020 Gale, Cengage Learning. All rights reserved.

Article Details
Printer friendly Cite/link Email Feedback
Title Annotation:Energy, the Environment & Water
Publication:Plant & Works Engineering
Date:Jan 1, 2020
Previous Article:Achieving ISO 14001:2015 Certification.
Next Article:Pumps prove to be the solid solution.

Terms of use | Privacy policy | Copyright © 2020 Farlex, Inc. | Feedback | For webmasters