Pressure sensors, monitors, controls.
Automated pressure and flow control systems, pressure gauge calibration systems, pressure regulators, including custom units. Systems allow user-defined multiple target pressures, holding times, and pressurization rates from vacuum to 60,000 psi.
Melt pressure transducers/transmitters feature nonmercury transfer medium and ceramic impregnated diaphragm. TFH high-accuracy transducers are for critical measurements. TFO standard transducers are for general-purpose measurement. TFJ transducers have temperature sensor (thermocouple, RTD) output. TF04 transducer has integrated amplifier output (4-20 mA, 0-10 v, etc.). Model 942 Eurotherm melt pressure controller has I/Q selectability, alarming, retransmission, built-in transcapability. The2408i Eurotherm process indicator has built-in transducer power supply, and communication capability. The2408i Eurotherm process indicator
has built-in transducer power supply, alarming outputs, and communication ability.
Pressure controllers and indicators for extrusion and injection molding.
AMETEK, INC. U.S. GAUGE DIV., PMT PRODUCT GROUP
Pressure transducers and transmitters from PMT Product Group. Pressure ranges from 3 to 5000 psi with various input/output configurations. Millivolt, voltage, and 4-20 mA outputs available on standard products. Complete media isolation achieved on Model 88 series transmitter with stainless-steel wetted parts.
Model AN2401 1/8-DIN panel-mounted pressure controller with 20 measurements/ sec and [+ or -] 0.01% accuracy. Isolated input and outputs; five-digit, high-visibility vacuum-fluorescent display; push-button setup, calibration, and operation; and programmable filter. Optional dual-relay setpoints, analog output with independent scaling, and RS232 serial interface.
See Eurotherm Controls Inc.
CAL CONTROLS, INC.
Model 3300 1/32-DIN temperature/ pressure controller with digital interface. Also Windows-based software for trending, monitoring, and remote adjustment of the 3300 controllers.
DELTA CONTROLS CORP.
Pressure transmitters for 0-40-in. [H.sub.2]O to 3000 psi. Process connections as small as 1/2 in. NPT available, as are ANSI flanges.
Also level transmitters and switches. Ultrasonic, capacitance, pressure, conductance, float and displacer, and sounding reel types.
Melt-pressure transducers, pressure indicators, and controllers for extrusion or injection molding.
Newest products are oil-based pressure transducers suitable for food and medical applications, as well as more durable non-filled SPT (Silicon Pressure Transducers) series with accuracy, stability and repeatability equal to filled types. Also new is SPX series of smart pressure transmitter with HART (highway-addressable) communication functionality. Pressure transmitters are also available with CANopen and DeviceNet digital networking protocols. Other products include:
* PT420 high-accuracy pressure transducer for critical pressure and temperature measurements with [+ or -] 0.25% accuracy to 30,000 psi.
* PT460 economical transducer with [+ or -] 0.5% accuracy from 500 to 30,000 psi.
* PT4624 amplified-output pressure transmitter produces a 4-20 mA signla for long-distance transmission without noise interference and easier interfacing with PLCs or extruder control systems.
* E242 and S242 series pressure transmitters for hazardous or explosive areas, including fiber spinning and melt extrusion.
* PT460XL enhanced pressure transducers with extra-thick sensing diaphragm for improved abrasion and corrosion resistance.
* PT130 hydraulic-pressure transducer with contoured sensing diaphragm for accuracy, repeatability, and fatigue strength.
* PT465XL nozzle-pressure transducer with flexible armored cable for longer life. 8-mil-thick flush diaphragm, and accurate measurements to 30,000 psi and 750 F.
* PT449 direct-cavity pressure transducer mounts flush within the cavity and measures pressures up to 20,000 psi and 600 F melt temperatures.
* Mechanical/electronic melt-pressure gauges provide local indication on extruders, easy readability, and resistance to vibration.
* ATC770 with self-tuning algorithm is fully compatible with a wide variety of process transmitters and a combination of jumpers and menu options. Selection of readout options.
* UPR700 pressure/process indicator is field configurable and programmable. Two process variables, such as melt temperature and pressure, can be shown on digital display indicators.
* High-stability 2290 and 2291 pressure and process indicators for extrusion are 1/8-DIN, plug-in models with five-digit LED displays and dual alarms. Model 2290 accepts strain-gauge input and 2991 takes linear inputs.
EUROTHERM CONTROLS INC.
Models 2604 and 2704 melt-pressure controller for extrusion accepts 350-ohm strain gauge input and incorporates its own transducer power supply. Front-panel features an auto/manual station and high visibility numerical and textual dual displays (2604) or full function graphical displays (2704) for viewing process variable, setpoint and other process information. Simple frontpanel procedure calibrates input transducer. Digital or analog communications available, in addition to two alarm outputs.
Model 2408i melt-pressure indicator for extrusion accepts 350-ohm strain gauge input and incorporates its own transducer power supply. Front-panel operation and indication of melt pressure, digital or analog communications and two alarm outputs available. Unit is part of full range of temperature and process indicators from 1/32- to 1/8-DIN sizes.
FLO-TECH DIV. RACINE FEDERATED INC.
Two digital-readout pressure indicators: Model DPM-100 with 3 1/2-digit resolution and accuracy of 0.25%; and model DPM-150 with 4 1/2-digit resolution and accuracy of 0.15%. Either can be calibrated for engineering units such as psi, tons, or force. Readouts designed for use with high-pressure, vacuum, melt-zone, and sanitary sensors. Units have easy-to-read 3/4-in. transflective displays and mount in standard 1/4-DIN panel openings.
GEFRAN ISI, INC.
Melt-pressure transducers, gauges, and alarm gauges. High-level output transducers and Factory Mutual-approved transmitters. Completely interchangeable with other brands. Also line of microprocessor-based instrumentation, 1/4-DIN and 1/8-DIN pressure indicators and 1/4-DIN pressure/temperature indicators. ISO 9002 certified.
GENTRAN INC. SUB. OF INVIVO CORP.
Melt-pressure/temperature transducers designed with a solid steel force rod have pressure ranges from 250 to 45,000 psi, accuracies of 0.5%, stem lengths from 3.5 to 18 in., and thermocouple capability. Also offers full line of standard or armored cables.
Gentran Tuffgage is a complete melt-pressure gauge ruggedly designed that requires no external power. The cost-effective units include options such as alarms, stem length, flexible stem, pressure ranges and termocouple power. Units require little maintenance and use no grease.
Analog and digital melt-pressure/ temperature indicators in 1/4-DIN size available with alarms and various shunt calibration setpoints. Easy-to-read units are industry compatible with any two-arm, 350-ohm Wheatstone bridge pressure transducer.
Mercury-free transducers employ hydraulic-pressure transfer and are suitable for measurements up to 680 F.
Line of melt-pressure transducers features all-welded stainless-steel housing and a hard-faced chrome-plated measuring diaphragm on an all-stainless-steel stem for protection from abrasive and adhesive effects of the melt. These bonded strain gate unites are offered in pressure ranges from 0-500 through 0-20,000 psig. Also featured are an integral calibration signal, choice of 0.5% FSO or 1.0% FSO accuracies for maximum economy, and variety of stem and capillary tubing lengths.
Spike series injection molding pressure transmitter engineered for high cyclic applications or applications susceptible to pressure spikes where zero stability is a concern.
Microprocessor-based pressure controllers for extrusion aid throughout stabilization by closed-loop feedback control of pressure at the die. The plug-in 1/4-DIN modules feature large LED readout, plus separate LCD display to allow calibration and mode changes. Single-channel and differential-pressure control forms available. Differential-pressure control is useful with melt pumps to increase metering accuracy and control continuous screen changers.
HONEYWELL DATA INSTRUMENTS
Pressure transducers with stainless-steel wetted parts monitor hydraulic pressures to 20,000 psi. Silicon micro-machined pressure transducers for use in noncorrosive gases up to 150 psi. Position transducers, both contact and noncontact, for linear displacements from 1/2 in. to 4 ft and rotary measurements up to 353 F.
KISTLER INSTRUMENT CORP.
Flush-mount piezoelectric quartz transducer for measuring cavity pressure in injection molding. Unit's 2.5-mm in cavity sensor is said to be the smallest of its kind. Unisens 4-mm sensors offers uniform sensitivity between sensors, allowing mold changeovers without rcalibrating. Direct and indirect measuring systems available. Behind-the-pin sensors match strain gauge dimensions and pricing. Piezoresistive silicon-wafer extrusion pressure sensor operates without a liquid medium and features a long-life diaphragm.
Line of electronic signal conditioners interfaces transducers to injection machine controls. Charge amplifiers control molding machine or provide analog outputs for monitoring. Specialized data-acquisition software for injection molding.
LUCAS CONTROL SYSTEMS SCHAEVITZ SENSORS
Pressure sensors for demanding environments in range of 0-0.5 to 0-10,000 psi. Units measure absolute, vented-gauge, or sealed-gauge pressure.
NEAL SYSTEMS INC.
SP series melt-pressure transducers feature low-volume capillary system to ensure thermal stability, while minimizing risk of process-fluid contamination. Features provide accuracy and fast response to temperature changes, while making the transducer less susceptible to flow erosion. Units reportedly last up to 10 times longer than conventional sensors.
OMEGA ENGINEERING, INC. AN OMEGA TECHNOLOGIES CO.
Pressure sensors and transducers for liquid and gas systems measure positive, negative, and absolute gauge pressures. Outputs include millivolt, amplified voltages, and current-loop signals. Options include meters, controllers signal conditioners, cable, connectors, and tubing.
ON LINE CONTROLS, INC.
MicroAir precision ultra low-pressure regulators allow for automatic control of OD, ID and wall of extruded tubing. A model for high-speed operation of bump and tapered tubing also available. Units compliment company's UltraGage ultrasonic measurement and control systems for pipe and tubing.
Pressure transducers, monitors, controllers, and machine upgrade kits for injection molding.
T-400 series mold-cavity pressure transducers feature rugged, universal design with removable cable. Range from 125 to 2000 lb with 0.1% repeatablility. Compatible with slide or button applications. NIST traceable.
T-6157 flush-mount transducers sense pressrue in molds without accessible ejector pins. Direct drop-in strain-gauge replacement for piezoelectric-type sensors. NIST traceable.
T-3000 unamplified hydraulic pressure transducers provide direct replacement for all sensors currently provided with today's molding controls. Pressure ranges from 100 to 10,000 psi. NIST traceable.
T-3030 digital hydraulic pressure gauge features 0.5 psi resolution, 0 to 10,000 psi range, and quick disconnect. Readings for peak pressure, continuous pressure, fill times, and pressure over time integral. Output provides user-setable setpoint alarm. NIST traceable.
Dartpak (Portable Analysis Kit) allows for in-plant and off-site collection of data for troubleshooting, mold tryouts, or machine evaluations. Channel assignments include hydraulic and mold pressure, screw movement and velocity, water flow rates, and thermocouple inputs.
DartScanner collects data from sensor inputs. which enables DartVision software to gather and organize data. DartScanner features five available channels and four digital-trigger inputs.
Complete range of industrial transducers and transmitters for monitoring gauge and absolute pressure, differential pressure, vacuum, load, weight, force, torgue, displacement, and vibration. Amplifiers, signal conditioners, and digital readouts also available. Features include miniature size, high temperature, sumersibility, flush diaphragm, and high-overload tolerance. Rugged all welded stainless-steel construction and a variety of pressure ports and mounting options. Output available in mv/v, 0-5 or 0-10 vdc, or 4-20 mA. Pressure ranges from 10-in [H.sub.2]O to 60,000 psi, load ranges from 25 grams to 3 million lb.
TANYX MEASUREMENTS, INC.
Extrusion pressure transmitters from Terwin Instruments. Products utilize a patented stainless-steel "dual-tube" measurement technique. Instruments do not incorporate a mercury liquid-filled capillary tube measurement mechanism.
All-welded, all-titanium, miniature flushmount (3/8-in. diam.) and 10-32 port pressure transducers for hydraulic, weighing, and general-purpose measurement from 25 to 5000 psi. Companion 3 1/2- and 4 1/2-digit displays provided in panel-mount DPMs and bar graphs.
Line of pressure transmitter includes rugged, low-cost sensors for injection molding ram-pressure control (models 340, 347); fast-response differerntial pressure sensors for container leak testing (models 374, 376); and pressure isolators to allow remote pressure sensing of processes sensitive to cross-contamination, particle accumulation, and viscous fluid problems (Series 23).
WIKA INSTRUMENT CORP.
Full line of medical and electronic pressure/temperature instruments, temperature instruments and diaphragm seals. Company is ISO 9001 certified.
|Printer friendly Cite/link Email Feedback|
|Title Annotation:||Product Lines Reviewed|
|Date:||Oct 1, 2003|
|Previous Article:||Temperature sensors, monitors, controls.|
|Next Article:||Liquid temperature-control equipment.|