Printer Friendly

Precision fluid valve.

The Model 2600-060 No-Drip fluid valve is designed for precise on-off flow control of medium to high viscosity fluid materials. It can also be used as a dispense valve for viscous materials such as acrylic, epoxy, PVC, silicone, urethane and lubricants. With its tungsten-carbide ball-end needle and carbide seat, the Model 2600-060 is said to be built for long service life. Replacing the needle, piston and all the seals in the valve can be accomplished in less than two minutes. The valve's one-piece pre-assembled cartridge is the only part required, and the valve does not have to be removed to perform service. The pneumatically actuated 2600-060 No-Drip valve is rated for 5,000 psi. Its rugged construction also includes an anti-abrasive, hard-coated needle shaft and wear-resistant fluid seals to maximize valve life, according to the company. (Sealant Equipment & Engineering)
COPYRIGHT 2007 Lippincott & Peto, Inc.
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2007, Gale Group. All rights reserved. Gale Group is a Thomson Corporation Company.

Article Details
Printer friendly Cite/link Email Feedback
Title Annotation:Suppliers Showcase: Equipment
Publication:Rubber World
Date:Jan 1, 2007
Previous Article:Calendar.
Next Article:Hammer mill system.

Related Articles
PCC Purchases English Valve Maker.
Congressmen Gain Insight into Foundries/Metalcasting Industry at Utah Showcase. (Industry News).
Solenoid valves.
Heated fluid power valve.
Dispense valves.
Dispense valve.

Terms of use | Privacy policy | Copyright © 2021 Farlex, Inc. | Feedback | For webmasters |