Printer Friendly

Articles from Polymer Engineering and Science (September 1, 2019)

1-21 out of 21 article(s)
Title Author Type Words
A Cost Effective and Facile Approach to Prepare Beadless Polycarbonate Nanofibers with Ultrafine Fiber Morphology. Baby, Thomas; Jose E., Tomlal; Thomas, P.C.; Mathew, Jomit T. Report 5924
Barrier Properties and Abrasion Resistance of Biopolymer-Based Coatings on Biodegradable Poly(Lactic Acid) Films. Aris, Zarif Farhana Mohd; Bavishi, Vishal; Sharma, Rashmi; Nagarajan, Ramaswamy Report 4795
Biaxial Characterization of Poly(ether-ether-ketone) for Thermoforming: A Comparison Between Bulge and in-Plane Biaxial Testing. Turner, Josh A.; Menary, Gary H.; Martin, Peter J. Report 6118
Characterization of Mechanically Reinforced Electrospun Dextrin-Polyethylene Oxide Sub-Microfiber Mats. Rodriguez-Zamora, Penelope; Pena-Juarez, Ma. Concepcion; Cedillo-Servin, Gerardo; Paloalto-Landon, A Report 5636
Comparing the Rheological and Reinforcing Effects of Graphene Oxide on Glassy and Semicrystalline Polymers. Charitos, Ilias; Mouzakis, Dionysios; Kontou, Evagelia Case study 7595
Dispersion and Properties of Natural Rubber-Montmorillonite Nanocomposites Fabricated by Novel In Situ organomodified and Latex Compounding Method. Fathurrohman, Mohamad Irfan; Rugmai, Supagorn; Hayeemasae, Nabil; Sahakaro, Kannika Report 6899
Dynamic Stress-Stiffening of Carbon Black-Filled Vulcanizates. Zhang, Yuanhong; Wang, Baojin; Zhang, Lin; Zhou, Hongbin Report 5504
Enhancement in Mechanical Properties of Multiwalled Carbon Nanotube-Reinforced Epoxy Composites: Crosslinking of the Reinforcement with the Matrix via Diamines. Moaseri, Ehsan; Bazubandi, Behnaz; Baniadam, Majid; Maghrebi, Morteza Case study 3776
Geometric Analysis of Dielectric Failures in Polyimide/Silicon Dioxide Nanocomposites. McCaffrey, Michael; Hones, Harrison; Cook, Jordan; Krchnavek, Robert; Xue, Wei Report 5440
High Residual Mechanical Properties at Elevated Temperatures of Bamboo/Glass Reinforced-Polybenzoxazine Hybrid Composite. Zhang, Kai; Wang, Fangxin; Pang, Yuezhao; Liang, Wenyan; Wang, Zhenqing Report 6665
Influence of Annealing on the Permeation Properties of a Thermoplastic Elastomer. Puentes-Parodi, Alejandro; Santoro, Leandro A.; Ferreira, Ignatius; Leuteritz, Andreas; Kuehnert, In Report 5187
Injection Molding with an Additive Manufactured Tool. Simpson, Patrick; Zakula, Autumn D.; Nelson, Jake; Dworshak, Jeremy K.; Johnson, Eric M.; Ulven, Cha Case study 4649
Interfacial Adhesion and Water Resistance of Stainless Steel-Polyolefin Improved by Functionalized Silane. Li, Xuefeng; Wang, Peng; Long, Shijun; Huang, Yiwan; Li, Haiyan; Hu, Chuanqun Report 4685
Preparation of Fast-Degrading Poly(Lactic Acid)/Soy Protein Concentrate Biocomposite Foams via Supercritical C[O.sub.2] Foaming. Liu, Tong; Peng, Xiang-Fang; Mi, Hao-Yang; Li, Heng; Turng, Lih-Sheng; Xu, Bai-Ping Report 6038
Rheological Behavior of Polypropylene Nanocomposites with Tailored Polymer/Multiwall Carbon Nanotubes Interface. Wang, Po-Hsiang; Gulgunje, Prabhakar; Ghoshal, Sushanta; Verghese, Nikhil; Kumar, Satish Report 9676
The Effect of Alginate on the Mechanical, Thermal, and Rheological Properties of Nano Calcium Carbonate-Filled Polylactic Acid Composites. Gao, Chengtao; Guo, Jianbing; Xie, Haibo Report 4313
The Synthesis of Fulvic Acid-Thiourea Amide Derivates Grafted Polystyrene and its Effect on the Crystallization and Performance of Poly(lactic acid). Duan, Kun; Zhen, Weijun Report 7561
Thermal, Fire, and Mechanical Properties of Solvent-Free Processed BN/Boehmite-Filled Prepregs. Pawelski-Hoell, Christin; Bhagwat, Sagar; Altstadt, Volker Report 8079
Thermomechanical Characterization of Thermoplastic Polyimide to Improve the Chain Interaction via Crystalline Domains. Nicholls, Alejandro Rivera; Craft, Garrett; Perez, Yesenia; Pellissier, Matthew; Stock, John A.; Tes Report 9926
Thermomechanical Characterization of Thermoplastic Polyimide-Polyurea to Improve the Chain Interaction via Internal Hydrogen Bonds. Nicholls, Alejandro Rivera; Pellisier, Matthew; Perez, Yesenia; Stock, John Allan; Kuli, Ken; Julien Report 8233
Thin-Wall Injection Molding of Polypropylene Using Molds with Different Laser-Induced Periodic Surface Structures. Masato, Davide; Sorgato, Marco; Batal, Afif; Dimov, Stefan; Lucchetta, Giovanni Report 5181

Terms of use | Privacy policy | Copyright © 2021 Farlex, Inc. | Feedback | For webmasters |