Printer Friendly

Articles from Polymer Engineering and Science (June 1, 2019)

1-23 out of 23 article(s)
Title Author Type Words
A Heuristic Method for Modeling the Initial Pressure Drop in Melt Filtration Using Woven Screens in Polymer Recycling. Pachner, Sophie; Aigner, Michael; Miethlinger, Jurgen 5313
A Method for Determining the Flow Front Velocity of a Plastic Melt in an Injection Molding Process. Mensler, Holger; Zhang, Shujun; Win, Thomas Report 7720
Chain Extension of Polyamide 6/Organoclay Nanocomposites. Tuna, Basak; Benkreira, Hadj Report 5610
Decreasing the Cycle Time for In-Mold Coating (IMC) of Sheet Molding Compound (SMC) Compression Molding. Bhuyan, Mohammad S.K.; Ko, Seunghyun; Villarreal, Maria G.; Straus, Elliott J.; James, Lee; Castro, Report 5738
Effect of Graphene Oxide on the Interlaminar Fracture Toughness of Carbon Fiber/Epoxy Composites. Mishra, Kunal; Bastola, Krishna P.; Singh, Raman P.; Vaidyanathan, Ranji Report 5862
Effect of Recycling and Injection Parameters on Gloss Properties of Smooth Colored Polypropylene Parts: Contribution of Surface and Skin Layer. Mbarek, Souad; Baccouch, Zaineb; Eterradossi, Olivier; Perrin, Didier; Monasse, Bernard; Garay, Hele Report 7078
Effects of Stereo-Defect Distribution on the Crystallization and Polymorphic Behavior of [beta]-Nucleated Isotactic Polypropylene/Graphene Oxide Composites with Different Melt Structures. Jiang, Xi; Yu, Yansong; Xu, Ruizhang; Li, Lu; Cao, Ya; Xiang, Ming; Kang, Jian; Sheng, Xingyue Report 5456
Experimental Study of Polymeric Stent Fabrication Using Homemade 3D Printing System. Zhao, Danyang; Zhou, Ruiqi; Sun, Jianxing; Li, Hongxia; Jin, Yifei Report 7188
Fluoroelastomers Reinforced with Carbon Nanofibers: A Survey on Rheological, Swelling, Mechanical, Morphological, and Prediction of the Thermal Degradation Kinetic Behavior. Ornaghi, Felipe G.; Bianchi, Otavio; Ornaghi, Heitor L.; Jacobi, Marly A.M. Report 5118
Grafting Polyisoprene onto Surfaces of Nanosilica via RAFT Polymerization and Modification of Natural Rubber. Xiang, Yixin; Shen, Xianrong; Gao, Jiangang; Asiri, Abdullah M.; Marwani, Hadi M. Report 5441
Hybrid-Permeability Model Evaluation Through Concepts of Tortuosity and Resistance Rate: Properties of Manufactured Hybrid Laminate. Monticeli, Francisco Maciel; Vidal, Dielly Cavalcanti da Silva Monte; Shiino, Marcos Yutaka; Voorwal Report 5812
I-Optimal Design of Poly(lactic-co-glycolic) Acid/Hydroxyapatite Three-dimensional Scaffolds Produced by Thermally Induced Phase Separation. Liu, Junyi; Zhang, Jing; James, Paul F.; Yousefi, Azizeh-Mitra Report 6768
Insight on the Influence of Nano Zinc Oxide on the Thermal, Dynamic Mechanical, and Flow Characteristics of Poly(Lactic Acid)--Zinc Oxide Composites. Shojaeiarani, Jamileh; Bajwa, Dilpreet; Jiang, Long; Liaw, Joshua; Hartman, Kerry Report 5390
Preparation of Long-Chain Branched Poly(ethylene terephthalate): Molecular Entanglement Structure and Toughening Mechanism. Liu, Juan; Ye, Lin; Zhao, Xiaowen Report 5001
Preparation of Ultra-High-Molecular-Weight Polyacrylamide by Vertical Solution Polymerization Technique. Sonker, Ekta; Tiwari, Rudramani; Adhikary, Pubali; Kumar, Krishna; Krishnamoorthi, S. Report 5405
Study of Tensile Properties of Multiwalled Carbon Nanotube/Polyether Ether Ketone Polymer Composites at the Nanoscale. Hsu, Chun-Yen; Scrafford, Kathryn; Ni, Chaoying; Deng, Fei Report 3731
Study on Airflow Field and Fiber Motion with New Melt Blowing Die. Han, Wanli; Xie, Sheng; Shi, Jing; Wang, Xinhou Report 4710
Synthesis and Characterization of Cross-Linked Poly(Sodium Acrylate)/Sodium Silicate Hydrogels. Mastalska-Poptawska, Joanna; Izak, Piotr; Wojcik, tukasz; Stempkowska, Agata; Goral, Zuzanna; Krzyza Report 5584
Synthesis and Properties of Fluorinated Graphene Oxide Bisphenol A Epoxy Nanocomposites. E., Husamelden; Fan, Hong Report 6217
Tailor-Made Controlled Rheology Polypropylenes from Metallocene and Ziegler-Natta Resins. Nie, Shouliang; Tzoganakis, Costas Report 4885
Toughness and Roughness in Hybrid Nanocomposites of an Epoxy Matrix. Schuster, Marcia B.; Coelho, Luiz A.F. 7960
Visual Analysis of Plastication of Long-Glass Fiber-Reinforced Resins Using a Glass-Insert Heating Cylinder. Ma, Sai; Shibata, Kazuyuki; Yokoi, Hidetoshi Report 6091
Vulcanization Accelerator Functionalized Nanosilica: Effect on the Reinforcement Behavior of SSBR/BR. Mao, Yimei; Tian, Qingfeng; Zhang, Chunhua; Tang, Yuan; Wang, Yanpeng; Li, Xiaohong; Ding, Tao Report 5527

Terms of use | Privacy policy | Copyright © 2022 Farlex, Inc. | Feedback | For webmasters |