Printer Friendly

Articles from Polymer Engineering and Science (August 1, 2019)

1-21 out of 21 article(s)
Title Author Type Words
Anionic Copolymerization of Nylon 6/12: A Comprehensive Review. Mohammadi, Mohammad; Ahmadi, Shervin; Ghasemi, Ismail; Rahnama, Mohammadreza Report 12258
Controlling Properties of Acrylate/Epoxy Interpenetrating Polymer Networks by Premature Termination of Radical Polymerization of Acrylate. Li, Wenlong; Delpouve, Nicolas; Araujo, Steven; Batteux, Florian; Bobo, Emilie; Saiter, Jean-Marc; T Report 5670
Effect of Interfacial Chemistry on Crystallization of Polypropylene/Multiwall Carbon Nanotube Nanocomposites. Wang, Po-Hsiang; Gulgunje, Prabhakar; Ghoshal, Sushanta; Odeh, Ihab N.; Verghese, Nikhil; Kumar, Sat Report 10147
Estimates for Material Shrinkage in Molded Parts Caused by Time-Varying Cavity Pressures. Bushko, Wit C.; Stokes, Vijay K. Report 6211
Influence of Screw Configuration and Processing Temperature on the Properties of Short Glass Fiber Reinforced Polypropylene Composites. Lekube, Blanca Maria; Purgleitner, Bianca; Renner, Karoly; Burgstaller, Christoph Report 5533
Influence of Thermal Annealing on Mechanical Properties and In Vitro Degradation of Poly(p-Dioxanone). Zhang, Jian-Feng; Jones, Scott; Wang, Donghui; Wood, Andrew; Washington, Tommy; Acreman, Kevin; Cuev Report 5966
Influence of Vacuum on the Porosity and Mechanical Properties in Rotational Molding. Vetter, Lukas; Werner, Jannik; Wolf, Michael; Hertie, Sebastian; Drummer, Dietmar Report 5368
Interface Porosity in Multilayered All-Conducting Polymer Electrodes. Borras, Nuria; Estrany, Francese; Aleman, Carlos Report 6732
Investigation of the Strain-Rate-Dependent Mechanical Behavior of a Photopolymer Matrix Composite With Fumed Nano-Silica Filler. Asif, Muhammad; Ramezani, Maziar; Khan, Kamran Ahmed; Khan, Muhammad Ali; Aw, Kean Chin Report 4209
Mechanical Characterization of Graphene Oxide Reinforced Epoxy at Different Strain Rates. Majzoobi, Gholam Hossein; Nejad, Shahab H. Amini; Sabet, Seyed Ali Reza Report 5466
On the Modeling and Optimization of UV-Curable Fluoro-Siloxane Formulations and Their Solvent Absorption and Adhesion Properties. Crook, Russell Allan; Allen, Andrew Case study 7663
Preparation and Characterization of Hydrophilic Temperature-Dependent Polyurethane Containing the Grafted Poly(N-Isopropylacrylamide). Chung, Yong-Chan; Bae, Jin Cheol; Choi, Jae Won; Chun, Byoung Chul Report 6487
Processability Study of In-Mold Coating for Sheet Molding Compound Compression Molded Parts. Ko, Seunghyun; Ouyang, Xilian; Straus, Elliott J.; Lee, L. James; Castro, Jose M. Case study 4117
Properties of Microinjection-Molded Polypropylene/Graphite Composites. Zhou, Shengtai; Hrymak, Andrew N.; Kamal, Musa R.; Jiang, Renze Case study 6040
Relationships Between Crystalline Structure and the Thermal Behavior of Polyethylene 2,5-furandicarboxylate): An In Situ Simultaneous SAXS-WAXS Study. Stoclet, Gregory; Arias, Andrea; Yeniad, Bahar; De Vos, Sicco Case study 6516
Synthesis and Self-Healing Behavior of Thermoreversible Epoxy Resins Modified With Nitrile Butadiene Rubber. Feng, Libang; Zhao, Hanwen; He, Xia; Zhao, Yanhua; Gou, Liuxiaohui; Wang, Yanping Report 5255
Synthesizing Radiation-Hard Polymer and Copolymers Using Laccol Monomers Extracted From Lacquer Tree Toxicodendron succedanea via Cationic Polymerization. Arachchilage, Imalka H.A.M.; Patel, Milly K.; Harmon, Julie P. Report 7080
The Influence of the Type of Polypropylene and the Length of the Flow Path on the Structure and Properties of Injection Molded Parts With the Weld Lines. Bociaga, Elzbieta; Kaptacz, Slawomir; Duda, Piotr; Rudawska, Anna Report 4979
Thermoplastic Polyurethane/Polytetrafluoroethylene/Bridged DOPO Derivative Composites: Flammability, Thermal Stability, and Mechanical Properties. Zhou, Ying; He, Weidi; Wang, Na; Xu, Dinghong; Chen, Xiaolang; He, Min; Guo, Jianbing Report 5043
Tough and Recoverable Triple-Network Hydrogels Based on Multiple Pairs of Toughing Mechanisms With Excellent Ionic Conductivity as Stable Strain Sensors. Li, Shuai; Bu, Ximan; Wu, Linlin; Ma, Xiaofeng; Diao, Wenjing; Zhuang, Zhenzhen; Zhou, Yongmin Report 6656
Viscoelastic Behavior and Constitutive Modeling of PP/HNT Composites Prepared by Water-Assisted Extrusion. Huang, Yu-Xiao; Huang, Han-Xiong Report 5267

Terms of use | Privacy policy | Copyright © 2019 Farlex, Inc. | Feedback | For webmasters