Printer Friendly

Articles from Polymer Engineering and Science (April 1, 2018)

1-20 out of 20 article(s)
Title Author Type Words
An Evaluation of Three Different Techniques for Melt Impregnation of Glass Fiber Bundles With Polyamide 12. Van De Steene, Willem; Verstock, Jan; Degrieck, Joris; Ragaert, Kim; Cardon, Ludwig Report 5706
Analysis of the Welding Strength in Hybrid Polypropylene Composites as a Function of the Forming and Overmolding Parameters. Giusti, Ruggero; Lucchetta, Giovanni Report 5581
Compatibilization of Polypropylene-Polyethylene Blends. Vervoort, S.; Doelder, J. den; Tocha, E.; Genoyer, J.; Walton, K.L.; Hu, Y.; Munro, J.; Jeltsch, K. 3775
Design of Biobased Poly(Butylene Succinate) Foams by Single-Screw Extrusion: Identification of Relevant Rheological Parameters Controlling Foam Morphologies. Duborper, C.; Samuel, C.; Akue-Asseko, A.-C.; Loux, C.; Lacrampe, M.-F.; Krawczak, P. Report 6429
Development and Performance Analysis of Static Mixing Nozzle for Injection Molding of Thermoset Elastomers. Rochman, Arif; Zahra, Keith Report 4556
Dynamic Local Temperature Control in Micro-Injection Molding: Effects on Poly(lactic acid) Morphology. De Meo, Annarita; De Santis, Felice; Pantani, Roberto Report 3551
Editorial. Cardon, Ludwig Brief article 221
Effect of Mold Opening on the Properties of PLA Samples Obtained by Foam Injection Molding. Volpe, Valentina; De Filitto, Martina; Klofacova, Vera; De Santis, Felice; Pantani, Roberto Report 5887
Evaluation of the Quality of Postconsumer Plastics Obtained from Disassembly-Based Recycling Strategies. Wagner, F.; Peeters, J.; De Keyzer, J.; Duflou, J.; Dewulf, W. Report 5666
Heat Resistance of Biobased Materials, Evaluation and Effect of Processing Techniques and Additives. Peelman, Nanou; Ragaert, Peter; Ragaert, Kim; Erkog, Mustafa; Van Bremp, Willem; Faelens, Femke; Dev Report 7158
High Strength Injection Molded Thermoplastic Composites. Azenha, Joao; Gomes, Marta; Silva, Pedro; Pontes, Antonio J. Report 4033
Mechanical Testing of Micromolded Plastic Parts by Nanoindentation. Zhiltsova, Tatiana; Daga, Bernardo; Frontini, Patricia; Neto, Victor; Oliveira, Monica Report 3386
Methodology for Sustainable Product Design. Sampaio, Alvaro M.; Sousa, Ana M.; Simoes, Paulo; Pontes, Antonio J. Report 8046
Mold Design for the Assembly Injection Molding of a Solid Housing With Integrated Dynamic Seal. Frick, Achim; Spadaro, Marcel Report 4105
Numerical Mesh Generation Tool for Thermal Conductivity Simulations of Nanoparticle Filled Inorganic Plates. Latre, S.K.; De Pooter, S.; Seveno, D.; Desplentere, F. Report 10170
Simulation Prediction of the Fiber Breakage History in Regular and Barrier Structure Screws in Injection Molding. Huang, Chao-Tsai; Tseng, Huan-Chang Report 4802
Study of the Design of Cooling Channels for Polymers Injection Molds. Marin, Felipe; de Miranda, Jackson Roberto; de Souza, Adriano Fagali Report 3400
The Relevance of Material and Processing Parameters on the Thermal Conductivity of Thermoplastic Composites. Wieme, Tom; Tang, Dahang; Delva, Laurens; Dhooge, Dagmar R.; Cardon, Ludwig Report 7538
Upcycling of Contaminated Post-Industrial Polypropylene Waste: A Design from Recycling Case Study. Ragaert, Kim; Hubo, Sara; Delva, Laurens; Veelaert, Lore; Bois, Els Du Case study 5144
Using Multiobjective Optimization Algorithms and Decision Making Support to Solve Polymer Extrusion Problems. Denysiuk, Roman; Recio, Gustavo; Covas, Jose Antonio; Gaspar-Cunha, Antonio Report 6790

Terms of use | Privacy policy | Copyright © 2020 Farlex, Inc. | Feedback | For webmasters