Printer Friendly

Articles from Polymer Engineering and Science (April 1, 2017)

1-13 out of 13 article(s)
Title Author Type Words
C[O.sub.2]-induced crystallization of polylactide and its self-templating 'stack of coins' crystalline microstructure. Sankarpandi, Sabapathy; Park, Chul B.; Ghosh, Anup K. Report 4490
Characterizing the flow of slurries using percolation theory-based functions. Wetzel, Mark D.; Campbell, Gregory A. Report 10440
Crystallization and component properties of polyamide 12 at processing-relevant cooling conditions. Fischer, Christopher; Seefried, Andreas; Drummer, Dietmar Report 5162
Development and properties evaluation of bio-based PLA/PLGA blend films reinforced with microcrystalline cellulose and organophilic silica. Santos, Fernanda Abbate dos; Iulianelli, Gisele Cristina Valle; Tavares, Maria Ines Bruno Report 6605
Enhancement of electrical conductivity and other related properties of epoxidized natural rubber/carbon nanotube composites by optimizing concentration of 3-aminopropyltriethoxy silane. Nakaramontri, Yeampon; Nakason, Charoen; Kummerlowe, Claudia; Vennemann, Norbert Report 7957
Experimental investigation of the effect of residual stresses and interfacial adhesion on rapid crack propagation in bilayered polypropylene/polyethylene (PP/PE100) pipes. Guevara-Morales, Andrea; Leevers, Patrick Report 4143
Experimental study and numerical simulation the air jet flow field of a dual slot sharp blunt die in the melt blowing nonwoven process. Zhao, Bo Report 4040
Improving crystallization behaviors of isotactic polypropylene via a new POSS-sorbitol compound. Feng, Baixuan; Li, Zhenguang; Chen, Guanyun; Zhu, Kongying; Zhao, Yunhui; Yuan, Xiaoyan Report 5453
Influence of aqueous dispersions in place of organic solvents during the synthesis of shape memory polyurethanes on their structure and properties. Martins, Giuliano S.; Pereira, Iaci M.; Hoehne, Nicolas M.L.; Orefice, Rodrigo L. Report 5738
Polycarbonate composites: effect of filler type and melt-blending process on the light diffusion properties. Song, Na; Hou, Xingshuang; Cui, Siqi; Ba, Chaoqun; Jiao, Dejin; Ding, Peng; Shi, Liyi Report 3934
Separation of phenanthrene/n-tetradecane mixtures (model diesel) via pervaporation using an aromatic polyimide membrane. Roychowdhury, Sayan; Mitra, Debarati Report 7324
Surface roughness and foam morphology of cellulose acetate sheets foamed with 1,3,3,3-tetrafluoropropene. Hopmann, Christian; Hendriks, Sven; Spicker, Claudia; Zepnik, Stefan; van Luck, Frank Report 5218
Synthesis, characterization, and thermomechanical properties of liquid crystalline epoxy resin containing ketone mesogen. Lin, Yi-Sheng; Hsu, Steve Lien-Chung; Ho, Tsung-Han; Cheng, Shi-Shiun; Hsiao, Yu-Hsiang Report 4638

Terms of use | Privacy policy | Copyright © 2022 Farlex, Inc. | Feedback | For webmasters |