Printer Friendly

Articles from Polymer Engineering and Science (November 1, 2015)

1-28 out of 28 article(s)
Title Author Type Words
A viscoelastic--plastic constitutive model for uniaxial ratcheting behaviors of polycarbonate. Jiang, Cheng Kai; Jiang, Han; Zhang, Jian Wei; Kang, Guo Zheng Report 4487
Effect of [gamma]-irradiation on glycolysis of PET waste and preparation of ecofriendly coatings using bio-based and recycled materials. Jamdar, Vandana; Kathalewar, Mukesh; Jagtap, R.N.; Dubey, Kumar Abhinav; Sabnis, Anagha Report 5524
Effect of poly(L-lactide)/poly(D-lactide) block length ratio on crystallization behavior of star-shaped asymmetric poly(L(D)-lactide) stereoblock copolymers. Li, Wei; Ma, Yan; Fan, Zhongyong Report 5058
Effect of reinforcement on the barrier and dielectric properties of epoxidized natural rubber-graphene nanocomposites. Yaragalla, Srinivasarao; Chandran, C. Sarath; Kalarikkal, Nandakumar; Subban, R.H.Y.; Chan, Chin Han Report 4147
Effects of in-situ functionalization of carbon nanotubes with Bis(triethoxysilylpropyl) Tetrasulfide (TESPT) and 3-aminopropyltriethoxysilane (APTES) on Properties of epoxidized natural rubber-carbon nanotube composites. Nakaramontri, Yeampon; Nakason, Charoen; Kummerlowe, Claudia; Vennemann, Norbert Report 7216
Effects of magnetic field input cycle and peptizer on the MR effect of magneto-rheological elastomer based on natural rubber. Chung, Kyungho; Jeong, Unchang; Oh, Jae-Eung Report 3921
Experimental investigation of a new type of interfacial instability in a reactive coextrusion process. Bondon, Arnaud; Lamnawar, Khalid; Maazouz, Abderrahim Report 6992
Extraction of polymer stress--strain behavior in the presence of self-heating by the use of a simple model for the elastic--plastic deformation. Bernard, Chrystelle A.; Fond, Christophe; Ahzi, Said; Bahlouli, Nadia Report 5552
Fabrication of highly expanded thermoplastic polyurethane foams using microcellular injection molding and gas-laden pellets. Sun, Xiaofei; Kharbas, Hrishikesh; Turng, Lih-Sheng Report 6818
High-performance fibers based on copolyimides containing benzimidazole and ether moieties: molecular packing, morphology, hydrogen-bonding interactions and properties. Zhang, Mengying; Niu, Hongqing; Chang, Jingjing; Ge, Qiyan; Cao, Li; Wu, Dezhen Report 7147
High-performance filaments by melt spinning low viscosity nylon 6 using horizontal isothermal bath process. Najafi, Mesbah; Avci, Huseyin; Kotek, Richard Report 6232
Impact of electrospinning process parameters on the measured current and fiber diameter. Sarabi-Mianeji, Siavash; Scott, Jennifer; Page, Danny J.Y.S. Report 4993
In situ preparation of CdS/PVA nanocomposites using gamma radiation. Ali, Zakaria I.; Ebraheem, Omayma; Saleh, Hoda H.; Salam, Fatma H. Abd; Sokary, Rehab Report 4720
Influence of alkali treatment on flax fiber for use as reinforcements in polylactide stereocomplex composites. Zhang, Huihui; Ming, Ruihao; Yang, Gesheng; Li, Yuzeng; Li, Qiao; Shao, Huili Report 3851
Influence of radiation cross-linking of polyamide 66 on the characteristics of the vibration welding process. Leisen, Christoph; Menacher, Markus; Drummer, Dietmar Report 4228
Insert injection molding of high-density polyethylene single-polymer composites. Mao, Qianchao; Wyatt, Tom P.; Chen, Jinnan; Wang, Jian Report 4549
Morphological analysis of microcellular PP produced in a core-back injection process using chemical blowing agents and gas counter pressure. Ruiz, Jose Antonio Reglero; Vincent, Michel; Agassant, Jean-Francois; Claverie, Aurore; Huck, Sebast Report 5903
Numerical modeling of internal heating curing of glass reinforced epoxy pipes. Flores, Hugo A.; Fasce, Laura Alejandra; Riccardi, Carmen C.; Ayude, Maria Alejandra Report 4848
Performances of poly(vinylidene fluoride-co-hexafluoropropylene) ultrafiltration membranes modified with poly(vinyl pyrrolidone). Kanagaraj, Palsamy; Nagendran, Alagumalai; Rana, Dipak; Matsuura, Takeshi; Neelakandan, Sivasubraman Report 6772
PolyHIPE/pullulan composites derived from glycidyl methacrylate and 1,3-butanediol dimethacrylate-based high internal phase emulsions. Qira, Funda; Mert, Emine Hilal 4052
Processing, structure, and properties of gel spun PAN and PAN/CNT fibers and gel spun PAN based carbon fibers. Newcomb, Bradley A.; Gulgunje, Prabhakar V.; Gupta, Kishor; Kamath, Manjeshwar G.; Liu, Yaodong; Gia Report 8961
Rheological properties and fracture toughness of epoxy resin/multi-walled carbon nanotube composites. Park, Soo-Jin; Heo, Gun-Young; Jin, Fan-Long Report 3269
Study on phenolphthalein poly(ether sulfone)-modified cyanate ester resin and epoxy resin blends. Wang, Guan; Wang, Rongguo; Fu, Gang; Gao, Tangling; Fu, Chunming; Kuang, Hong; Yang, Fan; Jiao, Weic Report 7144
Synthesis and characterization of interpenetrating polymer network based on sodium alginate and methacrylic acid and potential application for immobilization of Ti[O.sub.2] nanoparticles. Skoric, Marija Lucic; Milosavljevic, Nedeljko; Radetic, Maja; Saponjic, Zoran; Radoicic, Marija; Kru Report 4439
Synthesis and film properties of epoxy esters modified with amino resins from glycolysis products of postconsumer PET bottles. Cam, Cigdem; Bal, Ayca; Guclu, Gamze 4632
Temperature-dependent coefficient of thermal expansion (CTE) of injection molded, short-glass-fiber-reinforced polymers. Heinle, Martina; Drummer, Dietmar Report 4536
The effects of sonication time and frequencies on degradation, crystallization behavior, and mechanical properties of polypropylene. Liu, Ying; Xie, Linsheng; Ma, Yulu; Xue, Kaikai; Qiu, Wei; Shan, Tingting; Gao, Gang Report 5689
The properties of blends of maleic-anhydride-grafted polyethylene and thermoplastic starch using hyperbranched polyester polyol as a plasticizer. Guzman, Manuel; Murillo, Edwin A. Report 4229

Terms of use | Privacy policy | Copyright © 2019 Farlex, Inc. | Feedback | For webmasters