Printer Friendly

Articles from Polymer Engineering and Science (May 1, 2015)

1-30 out of 30 article(s)
Title Author Type Words
Acidic buffer mechanism of cyclotriphosphazene and melamine cyanurate synergism system flame retardant epoxy resin. Cheng, Yanbo; Li, Jiang; He, Yueshan; Wang, Biwu; Liu, Yuan; Wang, Qi Report 3078
Analysis of pellet shaping kinetics at the die opening in underwater pelletizing processes. Kast, Oliver; Geiger, Kalman; Grunschloss, Eberhard; Bonten, Christian Report 3575
Describing the sorption characteristics of a ternary system of benzene (1) and alcohol (2) in a nonporous polymer membrane (3) by the Flory-Huggins model. Hovorka, Stepan; Randova, Alena; Sysel, Petr; Brozova, Libuse; Zitka, Jan; Drasar, Pavel; Bartovska, Report 6153
Determination of molecular orientation using molecular dynamics for polymer melt flows in circular ducts. Motahari, Siamak; Kanvisi, Mojtaba; Kaffashi, Babak Report 3415
Disentanglement and micropore structure of UHMWPE in an athermal solvent. Cheung, Siu Yeung; Wen, Weijia; Gao, Ping Report 5471
Effect of sepiolite on the crystallization behavior of biodegradable poly(lactic acid) as an efficient nucleating agent. Wu, Jun; Zou, Xiaoxuan; Jing, Bo; Dai, Wenli Report 7044
Effect of uniaxial stretching on thermal, oxygen barrier, and mechanical properties of polyamide 6 and poly(m-xylene adipamide) nanocomposite films. Fereydoon, Maryam; Tabatabaei, Seyed H.; Ajji, Abdellah Report 9692
Electrical transport and morphological studies of polyaniline nanostructures. Chutia, P.; Kumar, A. Report 5001
Equibiaxial elongational viscosity measurements of commercial polymer melts. Mick, Rebecca M.; Shiu, Tai-Yi; Venerus, David C. 3463
Equilibrium and kinetic isotherms and parameters for molecularly imprinted with sclareol poly(acrylonitrile-co-acrylic acid) matrix. Dima, Stefan-Ovidiu Report 10014
Infrared melt temperature measurement of single screw extrusion. Vera-Sorroche, J.; Kelly, A.L.; Brown, E.C.; Coates, P.D. Report 4351
Investigation on the thermal and crystallization behavior of high density polyethylene/acrylonitrile butadiene rubber blends and their composites. Ponnamma, Deepalekshmi; George, Josephine; Thomas, Martin George; Han, Chan Chin; Valic, Srecko; Moz Report 5612
Kinetic modeling of atom transfer radical copolymerization of methyl methacrylate and 2-(trimethylsilyl) ethyl methacrylate in a train of continuous stirred-tank reactors. Wang, Wei; Zhou, Yin-Ning; Shi, Lan; Luo, Zheng-Hong Report 4688
Mass-productions of porous polyethylene template with controlled array structure. Yang, Bo; Niu, Gao; Zhou, Xiu-Wen; Liu, Xu-Dong; He, Wei; Yu, Bin; Zhu, Ye; Wu, Wei-dong Report 4350
Mechanical and thermal characterization of iron(II) 2,2'-bipyridine complex supported polyacrylonitrile fiber as a novel photocatalyst. Han, Zhenbang; Zhao, Xiaoming; Han, Xu; Xu, Hang Report 4992
Modification of asphalt using polymer-forming monomer. Chung, Kyungho; Park, Moonsoo; Mun, Sungho; Ohm, Byungsik; Yoo, Pyeongjun; Hong, Youngkeun Report 3646
Multiobjective optimization of long-chain branched propylene polymerization. Mogilicharla, Anitha; Majumdar, Saptarshi; Mitra, Kishalay Report 7206
New method for determining the optical rotatory dispersion of hydroxypropyl cellulose polymer solutions in water. Barzic, Andreea Irina; Dimitriu, Dan Gheorghe; Dorohoi, Dana Ortansa Report 3162
Optimization and numerical simulation analysis for molded thin-walled parts fabricated using wood-filled polypropylene composites via plastic injection molding. Azaman, M.D.; Sapuan, S.M.; Sulaiman, S.; Zainudin, E.S.; Khalina, A. Report 9996
Polyethylene/sepiolite fibers. Influence of drawing and nanofiller content on the crystal morphology and mechanical properties. Alonso, Yanela; Martini, Raquel E.; Iannoni, Antonio; Terenzi, Andrea; Kenny, Jose M.; Barbosa, Silv Report 4876
Preparation and characterization of chain extended poly(butylene succinate) foams. Zhou, Hongfu; Wang, Xiangdong; Du, Zhongjie; Li, Hangquan; Yu, Kejing Report 4088
Preparation and characterization of pH-sensitive microparticles based on polyelectrolyte complexes for antibiotic delivery. Aguero, L.; Zaldivar, D.; Pena, L.; Solis, Y.; Ramon, J.A.; Dias, Marcos L. Report 4543
Preparation and performance of sulfonated polysulfone flat ultrafiltration membranes. Liu, Zhen; Bai, Yang; Sun, Daobao; Xiao, Changfa; Zhang, Yufeng Report 5330
Preparation of magnetic porous terpolymer and its application in cellulase immobilization. Qi, Huimin; Duan, Hongdong; Wang, Xingjian; Meng, Xia; Yin, Xiaocong; Ma, Lina Report 4850
Preparation of porous nylon 6 fiber via electrospinning. Zhang, Huimin; Zhang, Li; Jia, Qingxiu; Shi, Chaoming; Yang, Jian Report 5042
Rheological methods to investigate graphene/amorphous polyamide nanocomposites: aspect ratio, processing, and crystallization. Canales, Jorge; Fernandez, Mercedes; Pena, Juan Jose; Munoz, Maria Eugenia; Santamaria, Antxon Report 6403
Separation of greenhouse gases from gas mixtures using nanoporous polymeric membranes. Mohammadi, Mehrnoush; Shirazian, Saeed; Asadollahzadeh, Mehdi; Jamshidy, Ladan; Hemmati, Alireza Report 2644
Solid state polymerization of bisphenol A polycarbonate: effect of the crystallization method and polymerization conditions. Colonna, Martino; Fiorini, Maurizio Report 3866
Styrene/isoprene/butadiene integrated rubber prepared by anionic bulk polymerization in a twin-screw extruder. Yuan, Xieyao; Wang, Jiming; Shan, Dong; Zheng, Anna Report 4258
The effect of microstructure on the slow crack growth resistance in polyethylene resins. Adib, Ali; Dominguez, Carlos; Rodriguez, Jesus; Martin, Carlos; Garcia, Rafael A. Report 4290

Terms of use | Privacy policy | Copyright © 2019 Farlex, Inc. | Feedback | For webmasters