Printer Friendly

Articles from Polymer Engineering and Science (February 1, 2015)

1-26 out of 26 article(s)
Title Author Type Words
Assessment of miscibility, crystallization behaviors, and toughening mechanism of polylactide/acrylate copolymer blends. Liang, Hongyu; Hao, Yanping; Bian, Junjia; Zhang, Huiliang; Dong, Lisong; Zhang, Huixuan Report 6429
Cold crystallization behavior of glassy poly(lactic acid) prepared by rapid compression. Li, Qian; Zhang, Ruijing; Shao, Chunguang; Wang, Yaming; Shen, Changyu Report 5217
Controlling of threadline dynamics via a novel method to develop ultra-high performance polypropylene filaments. Avci, Huseyin; Kotek, Richard; Toliver, Brandi Report 8820
Degradation of thermomechanical performance and lifetime estimation of multilayer greenhouse polyethylene films under simulated climatic conditions. Dehbi, Abdelkader; Mourad, Abdel-Hamid I.; Djakhdane, Khaled; Hilal-Alnaqbi, Ali Report 7124
Dispersion, migration, and 'network-like' structure formation of multiwall carbon nanotubes in co-continuous, binary immiscible blends of polyamide 6 and acrylonitrile-butadiene-styrene copolymer during simultaneous melt-mixing. Poyekar, Amrita V.; Bhattacharyya, Arup R.; Khare, Rupesh A.; Panwar, Ajay S.; Simon, George P.; Dha Report 7438
Effect of crosslinking density on resilient performance of low-resilience flexible polyurethane foams. Lei, Yanzhou; Zhou, Shengtai; Zou, Huawei; Liang, Mei Report 3173
Effective dissolution of UHMWPE in HDPE improved by high temperature melting and subsequent shear. Shen, Hongwang; He, Lei; Fan, Chunhua; Xie, Banghu; Yang, Wei; Yang, Mingbo Report 3645
Effects of polymer doping on dielectric and electro-optical parameters of nematic liquid crystal. Pandey, Shivani; Gupta, Swadesh Kumar; Singh, Dharmendra Pratap; Vimal, Tripti; Tripathi, Pankaj Kum Report 4266
Enhancing hydrophilicity of polyethylene terephthalate surface through melt blending. Kolahchi, Ahmad Rezaei; Ajji, Abdellah; Carreau, Pierre J. Report 7049
Evolution of phase morphology and 'network-like' structure of multiwall carbon nanotubes in binary polymer blends during melt-mixing. Poyekar, Amrita V.; Bhattacharyya, Arup R.; Panwar, Ajay S.; Simon, George P. Report 7434
Key role of hydrates in determining ion rejection by polyamide membrane. Gai, Jing-Gang; Gong, Xiao-Lei; Zhang, Xin; Kang, Wu-Li; Wang, Wei-Wei Report 5092
Low pressure-driven thin film composite membranes for Cr (VI) removal based on nanofibrous mats supported layer-by-layer assembly coatings. Zhang, Miaoxin; Wang, Jiaona; Li, Congju Report 4922
Mechanical investigation of confined amorphous phase in semicrystalline polymers: case of PET and PLA. Nguyen, Thanh L.; Bedoui, Fahmi; Mazeran, Pierre-Emmanuel; Guigon, Michele Report 5167
Novel composite polymer electrolyte membranes based on poly(vinyl phosphonic acid) and poly (5-(methacrylamido)tetrazole). Sinirlioglu, Deniz; Celik, Sevim Unugur; Muftuoglu, Ali Ekrem; Bozkurt, Ayhan Report 5813
Open-cell foams of polyethylene terephthalate/bisphenol a polycarbonate blend. Gong, Pengjian; Ohshima, Masahiro Report 6693
Polarized wave electromagnetic shielding of anisotropic carbon nanomodifier-based LLDPE composites. Villacorta, Byron S.; McDowell, Andrew; Hubing, Todd H.; Ogale, Amod A. Report 4446
Polyacrylamide hydrogel as an electrolyte for oxidation-based organic rectifiers. Tabanli, Sevcan; Gelir, Ali; Yilmaz, Yasar Report 4373
Preparation and foamability of high melt strength polypropylene based on grafting vinyl polydimethylsiloxane and styrene. Zhou, Shuai; Zhao, Shicheng; Xin, Zhong Report 5264
Preparation of PAA-g-PEG/PANI polymer gel electrolyte and its application in quasi solid state dye-sensitized solar cells. Liu, Qin; Wu, Jihuai; Lan, Zhang; Zheng, Min; Yue, Gentian; Lin, Jianming; Huang, Miaoliang Report 3552
Study of morphology and gas separation properties of polysulfone/titanium dioxide mixed matrix membranes. Moradihamedani, Pourya; Ibrahim, Nor Azowa; Yunus, Wan Md Zin Wan; Yusof, Nor Azah Report 5296
Synthesis and kinetics of ascorbic acid initiated graft copolymerized delignified cellulosic fiber. Priya, Bhanu; Singha, Amar Singh; Pathania, Deepak Report 6362
Synthesis and micellar characterization of luteinizing hormone-releasing hormone poly(ethylene glycol)-block-poly(L-histidine) copolymers. Li, Fei; Fan, Li; Li, Wei; Duan, Xiao; Qiao, Youbei; Wu, Hong Report 5510
Synthesis and properties of silicon-containing arylacetylene resins with polyhedral oligomeric silsesquioxane. Zhou, Yan; Huang, Farong; Du, Lei; Liang, Guozheng Report 3677
The simultaneous addition of styrene maleic anhydride copolymer and multiwall carbon nanotubes during melt-mixing on the morphology of binary blends of polyamide6 and acrylonitrile butadiene styrene copolymer. Jogi, B.F.; Bhattacharyya, Arup R.; Poyekar, Amrita V.; Potschke, Petra; Simon, George P.; Kumar, Sa Report 5329
Thermal pretreatment of kudzu biomass (Pueraria lobata) as filler in cost-effective PLA biocomposite fabrication process. Salak, Feridoun; Uemura, Satoshi; Sugimoto, Kiyotoshi Report 6940
Vibration welding of nano-Ti[O.sub.2] filled polypropylene. Lin, Leyu; Schlarb, Alois K. Report 3974

Terms of use | Privacy policy | Copyright © 2022 Farlex, Inc. | Feedback | For webmasters |