Printer Friendly

Articles from Polymer Engineering and Science (September 1, 2013)

1-24 out of 24 article(s)
Title Author Type Words
A stochastic approach for continuous and discontinuous crack growth in polycarbonate under cyclic loading. Matsuda, Shinya; Ogi, Keiji Report 3674
Adhesion performance and surface characteristics of low surface energy PSAs fluorinated by UV polymerization. Bae, Kyung-Yul; Lim, Dong-Hyuk; Park, Ji-Won; Kim, Hyun-Joong; Jeong, Han-Mo; Takemura, Akio Report 5748
Development, characterization, and modeling of environmentally friendly open-cell acoustic foams. Mosanenzadeh, Shahrzad Ghaffari; Naguib, Hani E.; Park, Chul B.; Atalla, Noureddine Report 5906
Dielectric analysis of [alpha]-relaxation process of chlorinated poly(vinyl chloride) stabilized with nitro-phenyl maleimide. Hanafy, Taha Abdel-Maguid; Mahrous, Salah Report 4005
Effect of coating method on gas separation by PDMS/PES membrane. Madaeni, S.S.; Mohammadi, M.; Badieh, Sarab; Vatanpour, V. Report 4391
Effect of EPDM-g-MAH on the morphology and properties of PA6/EPDM/HDPE ternary blends. Zhou, Yan; Wang, Wei; Dou, Rui; Li, Lan-peng; Yin, Bo; Yang, Ming-bo Report 6527
Effect of phase morphology and interfacial strength on barrier properties of high density polyethylene/polyamide 6 membranes. Lei, Fan; Du, Qin; Li, Ting; Li, Jiang; Guo, Shaoyun Report 5143
Estimation of tensile strength of inorganic plate-like particulate reinforced polymer composites. Liang, Ji-Zhao Report 2455
Experimental studies for stability of ferroelectric phase in potassium nitrate composite films. Kumar, Neeraj; Nath, Rabinder Report 5212
Extrusion with ultrasound applied on intumescent flame-retardant polypropylene. Sanchez-Olivares, G.; Sanchez-Solis, A.; Calderas, F.; Medina-Torres, L.; Herrera-Valencia, E.E.; Ri Report 4489
High polymer/surfactant ratio in the seeded semicontinuous heterogeneous polymerization of vinyl acetate. Martinez-Gutierrez, Hugo; Ovando-Medina, Victor M.; Peralta, Rene D.; Mendizabal, Eduardo; Puig, Jor Report 4304
Improving the mechanical properties of laser-sintered polyamide 12 through incorporation of carbon nanotubes. Bai, Jiaming; Goodridge, Ruth D; Hague, Richard J.M.; Song, Mo 5530
Instability of styrene/polystyrene/polybutadiene/polystyrene-b-polybutadiene emulsions that emulate styrene polymerization in the presence of polybutadiene. Velasquez, Eliezer; Oliva, Haydee; Muller, Alejandro J.; Lopez, Juan V.; Vega, Jorge; Meira, Gregori Report 7039
Investigation of third-order nonlinear optical properties of pyrazoline-doped polyvinyl alcohol films. Janardhana, K.; Ravindrachary, V.; Kumar, P.C. Rajesh; Ismayil Report 6151
Low-temperature cure high-performance cyanate ester resins/microencapsulated catalyst systems. Chen, Feng; Yuan, Li; Gu, Aijuan; Lin, Chao; Liang, Guozheng Report 3843
Mechanical and crystalline properties of monomer casting nylon-6/Si[O.sub.2] composites prepared via in situ polymerization. Xu, Sheng; Zhao, Xiaowen; Ye, Lin Report 7510
Mixed monolayers of PMAs with poly(styrene-b-methyl methacrylate) at the air/water interface. Su, Hsin-Kai; Hsu, Wen-Ping Report 4813
On thermal conductivity of micro- and nanocellular polymer foams. Sundarram, Sriharsha S.; Li, Wei Report 5251
Organomodification of montmorillonite and its effects on the properties of poly(butylene succinate) nanocomposites. Phua, Y.J.; Chow. W.S.; Ishak, Z.A. Mohd Report 5985
Preparation, characterization, and properties of polyacrylonitrile-silica gel anion exchange composite fibers. Khan, Asif Ali; Baig, Umair Report 3424
Reuse of cured epoxy as a reinforcement in an epoxy composite. Mohan, T.P.; Kanny, K. Report 3130
Tailoring the crystalline structure of polypropylene parts molded through water-assisted injection molding: effects of melt temperature and polymeric nucleating agent. Wang, Bin; Huang, Han-Xiong Report 4230
Three-dimensional multielectrode-controlled two orthogonal direction bendable IPMC actuator with an active clasp. Feng, Guo-Hua; Tsai, Jen-Wei Report 4896
Ultrahigh molecular weight polyethylene fibers prepared using conical dies with varying dimensions. Yeh, Jen-Taut; Wang, Chuen-Kai; Zhou, Qin; Zhou, Huo-Peng; Tsai, Chih-Chen; Lai, Yu-Ching; Tsou, Chi Report 6602

Terms of use | Privacy policy | Copyright © 2020 Farlex, Inc. | Feedback | For webmasters