Printer Friendly

Articles from Polymer Engineering and Science (September 1, 2012)

1-29 out of 29 article(s)
Title Author Type Words
3D model for powder compact densification in rotational molding. Asgarpor, Monir; Bakir, Farid; Khelladi, Sofiane; Khavandi, Alireza; Tchrkhtchi, Abbas Report 4285
Adhesion of extrusion-coated polymer sealing layers to a fiber-based packaging maini with an atomic layer deposited aluminum oxide surface coating. Lahtinen, Kimmo; Johansson, Petri; Kaariainen, Tommi; Cameron, David C. Report 3883
Design and fabrication of preshaped ionic polymer metal composite gripper by thermal treatment process. Kim, Dong-Ik; Seo, Beom-Ho; Lee, Seung-Ki; Park, Jae-Hyoung Report 2945
Effect of injection speed on phase morphology, crystallization behavior, and mechanical properties of polyoxymethylene/poly(ethylene oxide) crystalline/crystalline blend in injection processing. Bai, Shibing; Wang, Qi Report 3640
Effect of short-chain branching on melt fracture behavior of metallocene and conventional poly(ethylene/[alpha]-olefin) Copolymers. Garofalo, E.; Incarnato, L.; Maio, Di L. Report 5258
Effect of the impact conditions on the mechanical properties of injection-molded parts. Barbosa, Carlos N.; Viana, Julio C.; Franzen, Markus; Simoes, Ricardo Report 5463
Effects of mixing protocol on the performance of nanocomposites based on polyamide 6/acrylonitrile-butadiene-styrene blends. Oliveira, A.D.; Larocca, N.M.; Paul, D.R.; Pessan, L.A. 5506
Enhanced fatigue life of carbon nanotube-reinforced epoxy composites. Loos, M.R.; Yang, J.; Feke, D.L.; Manas-Zloczower Report 3419
Fabrication and characterization of silk fibroin powder/polyurethane fibrous membrane. Bai, Zikui; Xu, Weilin; Xu, Jie; Yang, Hongjun; Xiao, Shili; Liu, Xin; Liang, Guijie; Chen, Libo Report 5898
Facile preparation of water-dispersible graphene nanosheets by covalent functionalization with poly(3-aminobenzene sulfonic acid). Pham, Tuan Anh; Kim, Jong Su; Kim, Don; Jeong, Yeon Tae Report 3750
Fast and efficient manufacturing method of one- and two-dimensional polyethylene terephthalate transmission diffraction gratings by direct laser interference patterning. Perez-Hernandez, Heidi; Lasagni, Andres F. Report 3080
Global efficiency of innovative rotational mold directly heated by thermal fluid. Monzon, Mario D.; Bordon, Pablo; Benitez, Antonio N.; Kearns, Mark; Hernandez, Pedro M.; Marrero, Ma Report 4924
Investigation on particular phase morphology of immiscible polyamide 12 and polystyrene blends prepared via anionic ring-opening polymerization. Wu, Bozhen; Xie, Tingxiu; Yang, Guisheng Report 3647
Melt flow behavior in capillary extrusion of nanosized calcium carbonate-filled poly(L-lactic acid) biocomposites. Liang, Ji-Zhao; Tang, Chak-Yin; Zhou, Lin; Tsui, Chi-Pong; Li, Feng-Jiao Report 3097
Microwave dielectric properties and EMI shielding effectieness of poly (styrene-b-styrene-butadiene-styrene) copolymer fillde with PAni. Dodecylbenzenesulfonic acid and carbon black. Schettini, Anderson R.A.; Knastigir, Dipak; Soares, Bluma G. Report 4183
Packaging materials with tailor made light transmission properties for food protection. Intawiwat, Natthorn; Myhre, Elina; Oysaed, Harry; Jamtvedt, Svein H.; Pettersen, Marit Kvalvag Report 5776
Physical aging and thermal aging resistance of polycarbonate/poly(styrene-b-ethylene-co-butylene)-b-styrene blends. Suzuki, Shuta; Nishitsuji, Shotaro; Inoue, Takashi 2069
Polymer Engineering & Science: published by society of plastics engineers. 562
Positron annihilation lifetime spectroscopy and diffusion studies of large molecule penetrants into a polyester. Ward, Shelia A.; Pethrick, Richard A. Report 4197
Preparation and experimental parameters analysis of laser melt electrospun poly(L-lactide) fibers via orthogonal design. Li, Xiuyan; Liu, Huichao; Liu Jianli; Wang, Jiaona; Li, Congju Report 2546
Processing and mechanical properties of thermoplastic composites based on cellulose fibers and ethylene-acrylic acid copolymer. Arino, Ruth; Boldizar, Antal Report 4806
Rheological behavior of polypropylene nanocomposites at low concentration of surface modified carbon nanotubes. Thomas, Selvin P.; Girei, Salihu Adamu; Atieh, Muataz Ali; De, S.K.; Al-Juhani, Abdulhadi Report 3129
Rubber modification of unsaturated polyester resin with core-shell rubber particles: effect of shell composition. Ahmadi, M.; Moghbeli, M.R.; Shokrieh, M.M. Report 5366
Surface modifications of Polypropylene with Nonylphenol ethoxylates melt additives. Datla, V.; Shim, E.; Pourdeyhimi, B. Report 5307
Surface texture effect on scratch behavior of injection molded plastics. Chivatanasoontorn, Vadee; Tsukise, Shun; Kotaki, Masaya Report 3181
Thermal, mechanical, and barrier properties of polyethylene terephthalate-platelet nanocomposites prepared by in situ polymerization. Li, Shigeng; Auddy, Kausick; Barber, Peter; Hansen, Tara J.; Ma, Jisheng; Loye, Hans-Conrad zur; Plo 9794
Thermal, mechanical, and rheological characterization of polypropylene/layered double hydroxide nanocomposites. Lonkar, Sunil P.; Therias, Sandrine; Leroux, Fabrice; Gardette, Jean-Luc; Singh, Raj Pal Report 4850
Viscoelastic constitutive model for uniaxial time-dependent ratcheting of polyetherimide polymer. Pan, Douxing; Kang, Guozheng; Jiang, Han Report 3826
X-ray diffraction and differential scanning calorimetry studies of a BaTi[O.sub.3]/polyvinylidene fluoride composites. Elzayat, M.Y.F.; El-Sayed, S.; Osman, H.M.; Amin, M. Report 4035

Terms of use | Privacy policy | Copyright © 2021 Farlex, Inc. | Feedback | For webmasters