Printer Friendly

Articles from Polymer Engineering and Science (July 1, 2012)

1-25 out of 25 article(s)
Title Author Type Words
A new microcellular injection molding process for polycarbonate using water as the physical blowing agent. Peng, Jun; Turng, Lih-Sheng; Peng, Xiang-Fang Report 5446
Analysis of a liquid-assisted molding process for coating microchannels with an ultraviolet curable polymer. Boehm, Michael W.; Koelling, Kurt W. Report 6407
Anhydrous proton conductivity and chemical oxidation stability of amphoteric N-methyl-5- vinyltetrazole-based copolymers. Ye, Sheng; Pu, Hongting; Wan, Decheng Report 4830
Characterization and thermal-oxidative degradation behavior of poly(ethylene terephthalate-co-4,4'-bibenzoate) prepared via direct esterification technique. Dai, Junming; Li, Guang; Yang, Shenglin; Jiang, Jianming Report 4423
Comparison of melt extrusion and thermokinetic mixing methods in poly(ethylene terephthalate)/montmorillonite nanocomposites. Ozen, Ilhan; Inceoglu, Funda; Acatay, Kazim; Menceloglu, Yusuf Ziya Report 7496
Continuous infrared-assisted double-sided roll-to-roll embossing of flexible polymer substrates. Liu, Shih-Jung; Huang, Chun-Chieh; Liao, Che-Ting Report 3086
Crystallization of poly(3-hydroxybutyrate) with stereocomplexed polylactide as biodegradable nucleation agent. Chang, Ling; Woo, Eamor M. Report 3353
Effect of dispersion on rheological and mechanical properties of polypropylene/carbon nanotubes nanocomposites. Zhou, Kai; Gu, Shu-Ying; Zhang, Yi-Han; Ren, Jie Report 5818
Effect of silica nanopowder on the properties of wood flour/polymer composite. Deka, Biplab K.; Maji, Tarun K. Report 5501
Effect of volume ratio of acetonitrile to water on the morphology and property of polypyrrole prepared by chemical oxidation method. Huang, Zhenhao; Hu, Shuchun; Zhang, Nan; Chen, Xiaolang; Chen, Dan; Jin, Qian; Jian, Xian Report 2152
Effects of the aliphatic/aromatic structure on the miscibility, thermal, optical, and rheological properties of some polyimide blends. Cosutchi, Andreea Irina; Nica, Simona-Luminita; Hulubei, Camelia; Homocianu, Mihaela; Ioan, Silvia Report 6371
Electroconductive polyblend fibers of polyamide-6/polypropylene/polyaniline: electrical, morphological, and mechanical characteristics. Soroudi, Azadeh; Skrifvars, Mikael Report 3341
Extruded foams from microbial poly (3-hydroxybutyrate-co-3-hydroxyvalerate) and its blends with cellulose acetate butyrate. Liao, Qi; Tsui, Amy; Billington, Sarah; Frank, Curtis W. Report 8356
Improvement of thermal properties of biodegradable polymer poly(3-hydroxybutyrate) by modification with acryloyloxyethyl isocyanate. Chen, Bor-Kuan; Lo, Shuen-Hung; Shih, Chien-Chang; Artemov, Arseny V. Report 3795
Investigation of adhesion phenomena in thermoplastic polyurethane injection molding process. Chen, Jian-Yu; Hwang, Sheng-Jye Report 4357
Mechanical and morphological properties of poly(butylene adipate-co-terephthalate) and poly (lactic acid) blended with organically modified silicate layers. Shahlari, Mahin; Lee, Sunggyu Report 4592
Modification of poly(vinyl alcohol) films by the addition of Magnesium chloride hexahydrate. Jiang, Xiancai; Zhang, Xiaofei; Ye, Dezhan; Zhang, Xi; Dai, Hua Report 3619
Nanocomposites of poly(m-xylene diamide) with polyhedral oligomeric silsesquioxane, montmorillonite, and their combination: structure and properties. Magniez, K.; Fox, Bronwyn L.; Looney, Mark G. Report 6123
Phase inversion composition and domain identification by energy dispersive spectroscopy in immiscible blends of poly(trimethylene terephthalate) and polyamide6, 1O. Giancola, Giorgiana; Lehman, Richard L.; Miller, Steve Report 3919
Preparation and characteristics of a novel nano-sized calcium carbonate (nano-CaCO.sub.3)-supported nucleating agent of poly(L-lactide). Han, Lijing; Han, Changyu; Bian, Junjia; Bian, Yijie; Lin, Haijuan; Wang, Xuemei; Zhang, Huiliang; D Report 6938
Processing-structure-property relationships in solid-state shear pulverization: parametric study of specific energy. Bruner, Philip J.; Clark, Joshua T.; Torkelson, John M.; Wakabayashi, Katsuyuki Report 7519
Real-time crystalline orientation measurements during low-density polyethylene blown film extrusion using wide-angle X-ray diffraction. Gururajan, Giriprasath; Ogale, Amod A. Report 2790
Release evaluation of molecularly imprinted polymers prepared under molecular crowding conditions. Li, Xiao-Xia; Hao, Lan-Fang; Huang, Yan-Ping; Duan, Hong-Quan; Liu, Zhao-Sheng Report 5248
Synthesis, characterization of poly-2-(2-hydroxybenzylideneamino)-6-phenyl-4,5,6,7-tetrahydrobenzo[b]thiophene-3-carbonitrile: investigation of antibacterial activity and optical properties. Kaya, Esin; Turan, Nevin; Gunduz, Bayram; Colak, Naki; Korkoca, Hanifi Report 4494
The rheological, thermostable, and mechanical properties of polypropylene/fullerene [C.sub.60] nanocomposites with improved interfacial interaction. Wan, Dong; Wang, Yujie; Wen, Xin; Qiu, Jian; Jiang, Zhiwei; Tan, Haiying; Tang, Tao Report 4485

Terms of use | Privacy policy | Copyright © 2021 Farlex, Inc. | Feedback | For webmasters