Printer Friendly

Articles from Polymer Engineering and Science (April 1, 2012)

1-25 out of 25 article(s)
Title Author Type Words
Annealing-induced structural rearrangement and its toughening effect in injection-molded isotactic polypropylene. Na, Bing; Li, Zhujun; Lv, Ruihua; Zou, Shufen Report 3989
Enhanced orientation of the water-assisted injection-molded iPP in the presence of nucleating agent. Zheng, Guo-Qiang; Jia, Zhenhua; Liu, Xianhu; Liu, Baochen; Zhang, Xiaoli; Dai, Kun; Shao, Chunguang; Report 3791
Fabrication of honeycomb-structured porous films from poly(3-hydroxybutyrate) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) via the breath figures method. Huh, Mongyoung; Jung, Min-Hye; Park, Young Soo; Kang, Tae-Beom; Nan, Changwoon; Russell, Robert A.; Report 2941
Improvement in compression performance of the polysulfide sealant by thiol-acrylate reaction. Zhou, Baijie; Zhang, Junsheng; Wang, Qingjun; Chen, Qingmin Report 3975
Influence of the tert-dodecyl mercaptan content in poly(acrylonitrile-butadiene-styrene) on properties of chlorinated polyvinyl chloride/poly(acrylonitrile-butadiene-styrene) blends. Zhang, Lixin; Sun, Shulin; Ma, Xiaolin; Meng, Ting; Zhang, Mingyao; Zhang, Huixuan 3057
Investigation on the motion of different types of fibers in the vortex spinning nozzle. Pei, Zeguang; Hu, Biyu; Diao, Chuanyun; Yu, Chongwen Report 6854
Melt fracture of two broad molecular weight distribution high-density polyethylenes. Ansari, Mahmoud; Hatzikiriakos, Savvas G.; Sukhadia, Ashish M.; Rohlfing, David C. Report 5727
Melt grafting of maleic anhydride onto polypropylene with assistance of [alpha]-Methylstyrene. Luo, Weihua; Liu, Xingxing; Fu, Yujuan Report 3717
Metal ion adsorption behavior of lignocellulosic fiber-ethylene vinyl acetate composites. Vilakati, Gcina D.; Mishra, Ajay K.; Mishra, Shivani B.; Mamba, Bhekie B.; Thwala, Justice M. Report 4514
Molecular orientation distributions during injection molding of liquid crystalline polymers: ex situ investigation of partially filled moldings. Fang, Jun; Burghardt, Wesley R.; Bubeck, Robert A. Report 7018
Morphology development in the gate region of microinjection-molded thermoplastics. Chu, Jing-Song; Kamal, Musa R.; Derdouri, Abdessalem; Hrymak, Andy Report 4927
Production and characterization of crosslinked low-density polyethylene foams using waste of foams with the same composition. Saiz-Arroyo, C.; Saja, J.A. de; Rodriguez-Perez, M.A. Report 5937
Progress in development of epoxy resin systems based on wood biomass in Japan. Koike, Tsuneo Report 9180
Relating fracture behavior to spherulite size in conrolled-rheology polypropylenes. Salazar, A.; Rico, A.; Rodriguez, S.; Navarro, J.M.; Rodriguez, J. Report 5088
Rheological properties and irreversible dispersion changes in Carbon nanotube/epoxy systems. Schuiz, Sonja Carolin; Schlutter, Jana; Buschhorn, Samuel T.; Schulte, Karl; Bauhofer, Wolfgang Report 4386
Shear-induced crystallization of isotactic polypropylene studied by simultaneous light intensity and rheological measurements. Tiang, Jen Shueng; Dealy, John M. Report 8698
Study of the effects of multi-walled carbon nanotubes on mechanical performance and thermal stability of polypropylene. Pascual, J.; Peris, F.; Boronat, T.; Fenollar, O.; Balart, R. Report 5450
Synthesis and characterization of energetic GAP-b-PAEMA block copolymer. Zhang, Yang; Zhao, Juan; Yang, Pan; He, Shangjin; Huang, Hengjian Report 3637
Synthesis, characterization of an epoxy-terminated carbosiloxane and its application as a modifier in epoxy systems. Kang, Nianjun; Du, Zhongjie; Li, Hangquan; Zhang, Chen Report 3343
The application of digital image techniques to determine the large stress-strain behaviors of soft materials. Han, Yougun; Rogalsky, Allan D.; Zhao, Boxin; Kwon, Hyock Ju Report 5748
The effect of water activity on the sorption and diffusion of water in thermosets based on polyester, vinyl ester, and novolac resins. Romhild, S.; Hedenqvist, M.S.; Bergman, G. Report 4227
The effects of radiation cross-linking and process parameters on the behavior of polyamide 12 in vacuum thermoforming. Seefried, A.; Drummer, D. Report 4660
Three-dimensional numerical analysis of injection-compression molding process. Ho, Jae-Yun; Park, Jang Min; Kang, Tae Gon; Park, Seong Jin Report 5399
Totally bioresorbable composites prepared from poly(L-lactide)-co-(trimethylene carbonate) copolymers and Poly(L-lactide)-co-(glycolide) fibers as cardiovascular stent material. Han, Yam; Jin, Xiaoyun; Yang, Jian; Fan, Zhongyong; Lu, Zhiqian; Zhang, Yong; Li, Suming Report 6490
Visual observation and numerical studies of N2 vs. CO2 foaming behavior core-back foam injection molding. Ishikawa, Takeshi; Taki, Kentaro; Ohshima, Masahiro Report 4900

Terms of use | Privacy policy | Copyright © 2019 Farlex, Inc. | Feedback | For webmasters