Printer Friendly

Articles from Polymer Engineering and Science (June 1, 2011)

1-24 out of 24 article(s)
Title Author Type Words
A proposed technique to improve the filling of the mold cavity by polymer during injection molding. Hassan, Hamdy; Regnier, Nicolas; George, Jean-Marie; Defaye, Guy; Arquis, Eric Report 5406
Analysis of contributing factors to production of highly transparent isotactic polypropylene extrusion sheets. Part 2. Funaki, Akira; Kondo, Kaname; Kanai, Toshitaka Report 5272
Analysis of natural degradation of high-density polyethylene lining using time-dependent properties. Mbuge, Duncan O.; Gumbe, L.O.; Rading, G.O. Report 4431
Digital holographic interferometry: optomechanical properties of fibers. Yassien, Khaled; Agour, Mostafa Report 3956
Effect of filler addition and strain rate on the compressive strength of silica styrene-butadiene rubber-filled epoxy composites. Gope, Prakash Chandra; Singh, Vinay Kumar Report 3705
Effect of molecular structure and rheology on the compression foam molding of ethylene-[alpha]-olefin copolymers. Zhang, Ying; Kontopoulou, Marianna; Ansari, Mahmoud; Hatzikiriakos, Savvas; Park, Chul B. Report 4704
Effect of the addition of silane coupling agents on the properties of wollastonite-reinforced poly(ether ether ketone) composites. Ma, Gang; Yue, Xigui; Zhang, Shuling; Rong, Changru; Wang, Lifeng; Wang, Guibin; Wang, Hongliang Report 4154
Effect of the nucleophilicity and solvent on the chemical modification of flexible poly(vinyl chloride) by substitution. Kameda, Tomohito; Fukuda, Yuuzou; Grause, Guido; Yoshioka, Toshiaki Report 4443
Effects of carbon nanotubes and their state of dispersion on the anionic polymerization of [epsilon]-caprolactam: II. rheology. Penu, Christian; Hu, Guo-Hua; Fonteix, Christian; Marchal, Philippe; Choplin, Lionel; Feng, Lian-Fan Report 3268
Effects of the addition of LiCl, [LiCIO.sub.4], and [LiCF.sub.3][SO.sub.3] salts on the chemical structure, density, electrical, and mechanical properties of rigid polyurethane foam composite. Verdolotti, L.; Colini, S.; Porta, G.; Iannace, S. Report 4984
Electrospinning of polyacrylonitrile solutions containing diluted sodiumthiocyanate. Moon, SungCheal; Choi, JaeKon; Farris, Richard J. 5369
Environment-friendly silicone sealants by self-catalytic cross-linking reaction of [alpha]-aminomethyl triethoxysilanes. Yin, Yigao; Zhang, Yi; Chen, Xiaoyan; Liu, Siwei; Jiang, Xing; Chi, Zhenguo; Xu, Jiarui Report 4239
Formation and structure of organized molecular films for organo-modified montmorillonite and mixed monolayer behavior with poly(L-lactide). Fujimori, Atsuhiro; Kusaka, Jun-Ichi; Nomura, Rintaro Report 3658
Improvement of melt spinning properties and conductivity of immiscible polypropylene/polystyrene blends containing carbon black by addition of styrene-ethylene-butene-styrene block copolymer. Straat, Martin; Boldizar, Antal; Rigdahl, Mikael; Hagstrom, Bengt Report 3005
Kinetic and structural studies of the polymerization of N,N'-bismaleimide-4,4'-diphenylmethane with barbituric acid. Su, Heng-Lei; Hsu, Jung-Mu; Pan, Jing-Pin; Wang, Tsung-Hsiung; Yu, Fu-En; Chern, Chorng-Shyan Report 4266
Mechanical and electrical analysis of carbon black networking in elastomers under strain. Stubler, N.; Fritzsche, J.; Kluppel, M. Report 8096
Modification of novel bio-based resin-epoxidized soybean oil by conventional epoxy resin. Gupta, A.P.; Ahmad, Sharif; Dev, Anshu Report 2245
On the measurement of fracture toughness of soft biogel. Kwon, H.J.; Rogalsky, Allan D.; Kim, Dong-Woo Report 5897
Preparation and characterization of PET/clay nanocomposites by melt compounding. Ghasemi, Hesam; Carreau, Pierre J.; Kamal, Musa R.; Uribe-Calderon, Jorge Report 4775
Preparation of polystyrene particles with different morphologies. Chen, Jiafu; Li, Yan; Xue, Fengfeng; Chen, Zhimin; Xu, Qun Report 4597
Processing and characterization of recycled poly(ethylene terephthalate) blends with chain extenders, thermoplastic elastomer, and/or poly(butylene adipate-co-terephthalate). Srithep, Yottha; Javadi, Alireza; Pilla, Srikanth; Turng, Lih-Sheng; Gong, Shaoqin; Clemons, Craig; Report 5483
Solid-phase extrusion of polyamide-6 by using combined deformation schemes. Beloshenko, V.A.; Varyukhin, V.N.; Voznyak, A.V.; Voznyak, Yu. V. Report 4093
Synthesis of triblock copolymer having alternating structures and kinetics study on RAFT-mediated bulk, miniemulsion and seed miniemulsion polymerizations. Yu, Yitao; Zhan, Xiaoli; Zhang, Qinghua; Chen, Fengqiu Report 4955
Ultrasonic and impulse welding of polylactic acid films. Vogel, Julius; Grewell, David; Kessler, Michael R.; Drummer, Dietmar; Menacher, Markus 5087

Terms of use | Privacy policy | Copyright © 2019 Farlex, Inc. | Feedback | For webmasters