Printer Friendly

Articles from Polymer Engineering and Science (December 1, 2011)

1-27 out of 27 article(s)
Title Author Type Words
A general quantitative structure-property relationship treatment for dielectric constants of polymers. Xu, Jie; Wang, Lei; Liang, Guijie; Wang, Luoxin; Shen, Xiaolin Report 6330
Co-injection molding of immiscible polymers: skin-core structure and adhesion studies. Gomes, M.; Martino, D.; Pontes, A.J.; Viana, J.C. Report 4651
Effect of extensional properties of polymer solutions on the droplet formation via ultrasonic atomization. Kim, Yubin; Kim, Hyungsu Report 3973
Effect of nanoclay addition on the foaming behavior of linear Polypropylene-based soft thermoplastic polyolefin foam blown in continuous extrusion. Zhai, Wentao; Park, Chul B. Report 6055
Effect of Tackifiers on mechanical and dynamic properties of carbon- black-filled NR Vulcanizates. Thaijaroen, W. Report 3552
Effects of filler contents and processing parameters on the weldline strength of compression molded natural rubber. Patcharaphun, S.; Chookaew, W.; Tungkeunkunt, T.; Na-Ranong, N. Report 4020
Elongation properties of polyethylene melts. Liang, Ji-Zhao; Zhong, Lei Report 2841
Improvement in toughness and crystallization of poly(L-lactic acid) by melt blending with poly(epichlorohydrin-co-ethylene oxide). Zhang, Kunyu; Ran, Xianghai; Wang, Xuemei; Han, Changyu; Han, Lijing; Wen, Xin; Zhuang, Yugang; Dong Report 6349
Improving the predictions of injection molding simulation software. Vietri, U.; Sorrentino, A.; Speranza, V.; Pantani, R. Report 4434
Interpenetrating polymer network of blocked polyurethane and phenolic resin. II. Kinetic formation, swelling ratio, thermal properties, and flame retardance. Chen, Chin-Hsing Report 3535
Membrane color and gas permeability of 6FDA-TeMPD polyimide membranes prepared with various membrane preparation protocols. Kanehashi, Shinji; Sato, Shuichi; Nagai, Kazukiyo Report 4439
Micellar polymerization, characterization, and viscoelasticity of combined thermally insensitive terpolyacrylamides. Rodrfguez, Fatima Perez; Jimenez-Regalado, Enrique J. Report 6052
Morphology prediction and the effect of core-shell structure on the rheological behavior of PP/EPDM/HDPE ternary blends. Lan-Peng, Li; Yin, Bo; Yang, Ming-Bo Report 3964
Nonisothermal crystallization behavior of biodegradable poly(butylene terephthalate-co-butylene adipate-co-ethylene terephthalate-co-ethylene adipate) copolyester. Wang, Xiaohui; Shi, Jun; Chen, Ying; Shi, Yan; Fu Zhifeng Report 3633
Nonisothermal crystallization behaviors and conductive properties of PEO-Based solid polymer electrolytes containing yttrium oxide nanoparticles. Liang, Guijie; Xu, Jie; Xu, Weilin; Shen, Xiaolin; Bai, Zhikui; Yao, Mu Report 5183
On the differences in micro-deformation mechanism between isotactic polypropylene and [beta]-nucleated isotactic polypropylene as revealed by the confocal laser scanning microscopy. Jancar, J.; Kalfus, J.; Balkova, R. Report 2184
Polymer Engineering & Science: published by society of plastics engineers. 580
Preparation and properties of porous poly(sodium acrylate-co-acrylamide) salt-resistant superabsorbent composite. Chen, Zhenbin; Dong, Fang; Liu, Mingzhu; Qi, Xiaohua Report 6258
Process modeling for the synthesis of unsaturated polyester. Shah, M.; Zondervan, E.; Haan, A.B De Report 6507
Removal of methylene f blue dyes from wastewater using cellulose-based superadsorbent hydrogels. Zhou, Yiming; Fu, Shiyu; Liu, Hao; Yang, Shaoping; Zhan, Huaiyu Report 4968
Rheological properties of cotton pulp cellulose dissolved in 1-butyl-3-methylimidazolium chloride solutions. Liu, Zhen; Wang, Hui; Li, Zengxi; Lu, Xingmei; Zhang, Xiangping; Zhang, Suojiang; Zhou, Kebin Report 2768
Sheet bowing in thermoforming. Vodak, P.B.; Mix, A.W.; Giacomin, A.J. Report 3073
Shrinkage alteration induced by segregation of glass beads in injection molded PA6: experimental analysis and modeling. Kovacs, J.G. Report 4494
Styrene-assisted grafting of maleic anhydride onto isotactic poly butene-1. Zhao, Yongxian; Ma, Yujie; Yao, Wei; Huang, Baochen Report 3249
Tensile properties of microbial [beta]-glucan films. Blahovec, Jiri; Hejlova, Anna; Copikova, Jana; Novak, Miroslav Report 4271
The supermolecular structure of isotactic polypropylene/atactic polystyrene blends. Borysiak, Slawomir Report 8722
Ultradrawing properties of ultrahigh-molecular weight polyethylene/functionalized carbon nanotube fibers and transmittance properties of their gel solutions. Yeh, Jen-Taut; Wu, Tsong-We; Lai, Yu-Ching; Li, Qi-Cheng; Zhou, Huo-Peng; Zhou, Qin; Tsou, Chi-Hui; Report 8783

Terms of use | Privacy policy | Copyright © 2020 Farlex, Inc. | Feedback | For webmasters