Printer Friendly

Articles from Polymer Engineering and Science (June 1, 2010)

1-23 out of 23 article(s)
Title Author Type Words
A super-toughened nylon 12 blends via anionic ring-opening polymerization of lauryllactam in a twin screw extruder, preparation, morphology, and mechanical properties. Du, Libo; Yang, Guisheng 3460
Adhesion and delamination failure mechanisms in alternating layered polyamide and polyethylene with compatibilizer. Du, Qin; Jiang, Genjie; Li, Jiang; Guo, Shaoyun Report 5887
Characterization of highly filled wood flour-polyvinyl chloride composites: dynamic mechanical and dielectric analysis. Marathe, D.S.; Joshi, P.S. Report 3647
Characterization of the microinjection molding process. Chu, Jingsong; Kamal, Musa R.; Derdouri, Salim; Hrymak, Andy Report 7450
Effect of polyethylene oxide-polyethylene glycol content and humidity on performance of electro-active paper actuators based on cellulose/polyethylene oxide-polyethylene glycol microcomposite. Mahadeva, Suresha K.; Kim, Jaehwan Report 2873
Effect of relatively nontoxic thermal stabilizers on photodegradation of poly(vinyl chloride). Xiang, Xiuqin; Chen, Shuangjun; Zhang, Jun; Huang, Xin Report 5314
Effects of film and substrate dimensions on warpage of film insert molded parts. Kim, Seong Yun; Lee, Jung Tae; Kim, Jin Young; Youn, Jae Ryoun Report 4452
Experimental and numerical investigation of injection molding with microrib patterns. Lee, Jae Gu; Lee, Bong-Kee; Kang, Tae Gon; Kwon, Tai Hun Report 6811
Fabrication of all-polymeric photonic bandgap Bragg fibers using rolling of coextruded PS/PMMA multilayer films. Stoeffler, Karen; Dubois, Charles; Ajji, Abdellah; Guo, Ning; Boismenu, Francis; Skorobogatiy, Maksi Report 2558
Formation and characterization of polyethylene blends for autoclave-based expanded-bead foams. Behravesh, Amir H.; Park, Chul B.; Lee, Eung K. Report 2978
In memory of professor James Lindsay White, 1938-2009. Obituary 1108
Inspection model and correlation functions to assist in the correction of qualitative defects of injected parts. Chaves, Miryam L.; Vizan, Antonio; Marquez, Juan J.; Rios, Jose Report 7510
Ionic liquids as plasticizers/lubricants for polylactic acid. Park, Kuil; Ha, Jin Uk; Xanthos, Marino Report 3663
Low viscous hydrophilic processing additives for extrusion of polyethylene at reduced temperatures. Kulikov, Oleg; Hornung, Klaus; Wagner, Manfred Report 14464
Model identification of a twin screw extruder for Thermoplastic Vulcanizate (TPV) applications. Trifkovic, M.; Sheikhzadeh, M.; Choo, K.; Rohani, S. Report 6246
Modeling and prediction of morphology and crystallinity for cylindrical-shaped crystals during Polymer Processing. Zhou, Ying-Guo; Turng, Lih-Sheng; Shen, Chang-Yu Report 5868
Operating window for the peeling of polyimide film. Wang, Han-Yi; Liu, Ta-Jo; Liu, Shur-Fen; Jeng, Jhy-Long Report 6401
Preparation and characterization of high-temperature resistance polyimide foams. Pan, Ling-Ying; Zhan, Mao-Sheng; Wang, Kai Report 3767
Real-time ultrasonic characterization of the chain orientation of high density polyethylene melts during processing. Lin, Congmei; Wang, Shan; Sun, Huimin; Li, Jiang; Guo, Shaoyun Report 6437
Structural estimation of particle arrays at air-water interface based on silica particles with well-defined and highly grafted poly(methyl methacrylate). Moon, Jung-Min; Kim, Bong-Soo; Paik, Hyun-Jong; Lee, Jang-Oo; Mouri, Emiko; Yoshinaga, Kohji Report 4159
Synthesis and characterization of poly(butyl acrylate-co-ethylhexyl acrylate)/poly(vinyl chloride)[P(BA-EHA)/PVC] novel core-shell modifier and its impact core-shell modifier for a poly(vinyl chloride)-based blend. Pan, Mingwang; Xing, Shengnan; Yuan, Jinfeng; Wu, Jiawei; Zhang, Liucheng Report 6634
The effects of alumina and silica nanoparticles on the cure kinetics of Bisphenol E Cyanate Ester. Xia, Sheng; Akinc, Mufit; Kessler, Michael R. Report 6056
The processing of polypropylene cast films. I. Impact of material properties and processing conditions on film formation. Aniunoh, Kenneth; Harrison, Graham M. Report 5922

Terms of use | Privacy policy | Copyright © 2020 Farlex, Inc. | Feedback | For webmasters