Printer Friendly

Articles from Polymer Engineering and Science (September 1, 2008)

1-25 out of 25 article(s)
Title Author Type Words
A simplified approach to predict part temperature and minimum "safe" cycle time. Hioe, Yunior; Chang, Keh-Chyou; Zuyev, Konstantin; Bhagavatula, Narayan; Castro, Jose M. Technical report 4354
Characterization of viscoelastic fluid flow in a periodically driven cavity: flow structure, frequency response, and phase lag. Sriram, S; Deshpande, Abhijit P.; Pushpavanam, S. Technical report 4984
Chromophore concentration effect on holographic grating formation efficiency in novel azobenzene-functionalized polymers. Schab-Balcerzak, Ewa; Sobolewska, Anna; Miniewicz, Andrzej; Jurusik, Jan Technical report 7988
Effect of molecular weight and end capping on poly(lactic-co-glycolic acid) ultrasound contrast agents. Eisenbrey, J.R.; Burstein, O. Mualem; Wheatley, M.A. Technical report 3916
Electrospinning and alignment of polyaniline-based nanowires and nanotubes. Attout, A.; Yunus, S.; Bertrand, P. Technical report 2995
Formation and characterization of polyurethane--vermiculite clay nanocomposite foams. Patro, T. Umasankar; Harikrishnan, G.; Misra, Ashok; Khakhar, Devang V. Technical report 4160
In situ compatibilization of maleated thermoplastic starch/polyester melt-blends by reactive extrusion. Raquez, Jean-Marie; Nabar, Yogaraj; Narayan, Ramani; Dubois, Philippe Technical report 4580
In situ reactive compatibilization of aramid/polystyrene blends using amine-functionalized polystyrene. Shabbir, Saima; Zulfiqar, Sonia; Ahmad, Zahoor; Sarwar, Muhammad IIyas Technical report 4561
Mechanical and tribological properties of polyoxymethylene modified with nanoparticles and solid lubricants. Sun, Lan-Hui; Yang, Zhen-Guo; Li, Xiao-Hui Technical report 4282
Microstructure and water vapor transport properties of functionalized carbon nanotube-reinforced dense-segmented polyurethane composite membranes. Mondal, S.; Hu, J.L. Technical report 4250
Miscibility, melting, and crystallization behavior of poly(hydroxybutyrate) and poly(D,L-lactic acid) blends. Gunaratne, L.M. Wasantha K.; Shanks, R.A. Technical report 6241
Morphology and glass transition of thin polylactic acid films. Narladkar, A.; Balnois, E.; Vignaud, G.; Grohens, Y.; Bardeau, J.-F. Technical report 3442
Multiscale roughness analysis in injection-molding process. Bigerelle, Maxence; Gorp, Van Adrien; Lost, Alian Technical report 6221
Natural rubber nanocomposite reinforced with nano silica. Chen, Ying; Peng, Zheng; Kong, Ling Xue; Huang, Mao Fang; Li, Pu Wang Technical report 2092
Numerical prediction of phase-change heat conduction of injection-molded high density polyethylene thick-walled parts via the enthalpy transforming model with mushy zone. Yang, Bin; Fu, Xiao-Rong; Yang, Wei; Huang, Li; Yang, Ming-Bo; Feng, Jian-Min Technical report 7446
Prediction of residual stress and viscoelastic deformation of film insert molded parts. Kim, Seong Yun; Oh, Hwa Jin; Kim, Sung Ho; Kim, Chae Hwan; Lee, Seung Hwan; Youn, Jae Ryoun Technical report 3186
Pressure and temperature behavior of thermoplastic polymer melts during high-pressure expansion injection molding. Rogelj, Saso; Krajnc, Matjaz Technical report 5542
Properties of new nanocomposite triblock copolymer gels based on expandable graphite. Paglicawan, Marissa A.; Kim, Jin Kuk Technical report 3539
Radiation and postirradiation crosslinking and structure of two unsaturated polyester resins. Pucic, Irina; Jurkin, Tanja Technical report 5542
Review: increasing the efficiency of the extrusion process. Sikora, Janusz W. Technical report 2188
Rheological characterization of starch derivatives/polycaprolactone blends processed by reactive extrusion. Bossard, Frederic; Pillin, Isabelle; Aubry, Thierry; Grohens, Yves Technical report 4794
The morphology, mechanical properties, and flammability of aligned electrospun polycarbonate (PC) nanofibers. Moon, SungCheal; Farris, Richard J. Technical report 4076
Three-dimensional simulation of primary and secondary penetration in a clip-shaped square tube during a gas-assisted injection molding process. Chau, Shiu-Wu Technical report 9314
Uniaxial tensile properties underlying plane-stress rapid fracture resistance in polyethylene. Ozbek, Pemra; Leevers, Patrick Technical report 3445
Water bamboo husk reinforced poly (lactic acid) green composites. Wang, Kuo-Hsiung; Wu, Tzong-Ming; Shih, Yeng-Fong; Huang, Chien-Ming Technical report 3555

Terms of use | Privacy policy | Copyright © 2021 Farlex, Inc. | Feedback | For webmasters