Printer Friendly

Articles from Polymer Engineering and Science (November 1, 2008)

1-22 out of 22 article(s)
Title Author Type Words
A simplified method to determine the 3D orientation of an injection molded fiber-filled polymer. Regnier, G.; Dray, D.; Jourdain, E.; Roux, S. Le; Schmidt, F.M. Technical report 6373
Analysis of electrical, dielectric, and electromagnetic interference shielding behavior of graphite filled high density polyethylene composites. Panwar, Varij; Mehra, R.M. Technical report 5291
Antistatic performance and morphological observation of ternary blends of poly(ethylene terephthalate), poly(ether esteramide), and lonomers. Kobayashi, Toshikazu; Wood, Barbara A.; Takemura, Akio; Ono, Hirokuni Technical report 6740
Challenges of shape memory polymers: a review of the progress toward overcoming SMP's limitations. Rousseau, Ingrid A. Technical report 12123
Correlation of the melt rheological properties with the foaming behavior of immiscible blends of poly(2,6-dimethyl-1,4-phenylene ether) and poly(styrene-co-acrylonitrile). Ruckdaschel, Holger; Rausch, Julius; Sandler, Jan K.W.; Altstadt, Volker; Schmalz, Holger; Muller, A Technical report 9085
Effect of processing parameters on the uniformity of adhesive meltblown web. Wang, Xiaomei; Zhao, Qiming Technical report 1550
Effects of polyol molecular weight on properties of benzoxazine-urethane polymer alloys. Rimdusit, Sarawut; Mongkhonsi, Tharathon; Kamonchaivanich, Pakawan; Sujirote, Kuljira; Thiptipakorn, Technical report 4913
Electrical conductivity and rheological behavior of multiphase polymer composites containing conducting carbon black. Zhang, Qinghua; Xiong, Hui; Yan, Weixia; Chen, Dajun; Zhu, Meifang Technical report 4699
Erratum. Correction notice 88
Film insert molding as a novel weld-line inhibition and strengthening technique. Leong, Yew Wei; Umemura, Toshikazu; Hamada, Hiroyuki Technical report 5700
HDPE functionalization via high shear stress-induced initiation and its effects on HDPE/GF composite. Zhang, Yuncan; Chen, Jinyao; Li, Huilin 4400
Injection molding of a diffractive optical element. Tofteberg, Terje; Amedro, Helene; Andreassen, Erik Technical report 5367
Mathematical modeling for the ionic inclusion process inside conducting polymer-based thin-films. Majumdar, Saptarshi; Kargupta, Kajari; Ganguly, Saibal Technical report 5128
Mixed--mode subcritical crack growth in orthotropic polymers. Wu, Chunhui; Mantell, Susan C.; Davidson, Jane H. Technical report 4847
Modeling of heat transfer in rotational molding. Banerjee, S.; Yan, W.; Bhattacharyya, D. Technical report 7912
Morphology and mechanical properties of impact modified polypropylene blends. Tortorella, Nathan; Beatty, Charles L. 9173
Morphology and rheological properties of blends of chemically modified thermoplastic starch and polycaprolactone. Shin, Boo Young; Narayan, Ramani; Lee, Sang II; Lee, Tae Jin Technical report 3921
Multiobjective optimization of an industrial nylon-6 semi batch reactor using the a-jumping gene adaptations of genetic algorithm and simulated annealing. Ramteke, Manojkumar; Gupta, Santosh K. Technical report 11120
Polydomain model predictions of molecular orientation in isothermal channel flows of thermotropic liquid crystalline polymers. Fang, Jun; Burghardt, Wesley R.; Bubeck, Robert A. Technical report 6707
Smart sunglasses based on electrochromic polymers. Ma, Chao; Taya, Minoru; Xu, Chunye Technical report 2576
Spatial heterogeneity of photo-oxidation and its relation with crack propagation in polyethylene composites. Yang, Rui; Liu, Ying; Yu, Jian; Zhang, Dongqing Technical report 4362
The development and characterization of polymer microinjection molded gratings. Angelov, A.K.; Coulter, J.P. Technical report 4009

Terms of use | Privacy policy | Copyright © 2021 Farlex, Inc. | Feedback | For webmasters