Printer Friendly

Articles from Polymer Engineering and Science (November 1, 2007)

1-30 out of 30 article(s)
Title Author Type Words
A short review on rubber/clay nanocomposites with emphasis on mechanical properties. Sengupta, R.; Chakraborty, S.; Bandyopadhyay, S.; Dasgupta, S.; Mukhopadhyay, R.; Auddy, K.; Deuri, Technical report 11691
A stochastic flow model for a tubular solution polymerization reactor. Vianna, Ardson dos S., Jr.; Biscaia, Evaristo C., Jr.; Pinto, Jose Carlos Technical report 4800
Anisotropic shrinkage of injection molded Poly Vinylidene Fluoride samples. Speranza, V.; Pantani, R.; Besana, G.B.; Titomanlio, G. Technical report 4417
Comparison between surface renewal devolatilizing performances of different screw extruders. Wang, Ning He Technical report 4916
Comparison of vertical and horizontal slot die coatings. Chang, Hsien-Ming; Chang, Yu-Rong; Lin, Chi-Feng; Liu, Ta-Jo Technical report 5275
Controllable fabrication and properties of polypropylene nanofibers. Wang, Dong; Sun, Gang; Chiou, Bor-Sen; Hinestroza, Juan P. Technical report 3929
Crosslinking of rotational molding foams of polyethylene. Marcilla, A.; Garcia-Quesada, J.C.; Ruiz-Femenia, R.; Beltran, M.I. Technical report 5565
Crystallization behaviors and mechanical properties of poly(ethylene 2,6-naphthalate)/multiwall carbon nanotube nanocomposites. Kim, Jun Young; Han, Sang-II; Kim, Seong Hun Technical report 6436
Development of freeze flow apparatus to study filled polymer melts. Beard, M.A.; Tabor, G.R.; Ritchie, S.J.K.; Evans, K.E.; Walton, R.I. Technical report 3022
Dynamic viscoelastic properties of fluoroelastomer/clay nanocomposites. Maiti, Madhuchhanda; Bhowmick, Anil K. Technical report 5132
Eco-plastics: morphological and mechanical properties of recycled poly(carbonate)-crushed rubber (rPC-CR) blends. Zribi, K.; Elleuch, K.; Feller, J.F.; Bourmaud, A.; Elleuch, B. Technical report 3991
Effect of melt processing conditions on the morphology and properties of nylon 6 nanocomposites. Chavarria, F.; Shah, R.K.; Hunter, D.L.; Paul, D.R. Technical report 9478
Effect of thermal aging on the crystal structural characteristics of poly(tetra fluoro ethylene). Jain, Anjana; Vijayan, Kalyani Technical report 3899
Evaluation of the interfacial state in high impact polystyrene through dynamic mechanical analysis as a function of the synthesis conditions. de Leon, R. Diaz; Morales, G. Technical report 8300
Extruded starch-nanoclay nanocomposites: effects of glycerol and nanoclay concentration. Chiou, Bor-Sen; Wood, Delilah; Yee, Emma; Imam, Syed H.; Glenn, Greg M.; Orts, William J. Technical report 3699
Flexural and tensile moduli of polypropylene nanocomposites and comparison of experimental data to Halpin-Tsai and Tandon-Weng models. Kalaitzidou, Kyriaki; Fukushima, Hiroyuki; Miyagawa, Hiroaki; Drzal, Lawrence T. Technical report 4013
Influence of different process and material parameters on chemical foaming of fluorinated ethylene propylene copolymers. Zirkel, Larissa; Munstedt, Helmut Technical report 5555
Influence of epoxy resin on the morphological and rheological properties of PBT/ABS blends compatibilized by ASMA. Yao, Zengzeng; Lin, Mei; Zhou, Jing; Wang, Haitao; Zhong, Wei; Du, Qiangguo Technical report 4005
Localized effects of dynamic melt manipulation on flow induced orientation and mechanical performance of injection molded products. Layser, Gregory S.; Coulter, John P. Technical report 4787
Mechanical properties of wollastonite-reinforced polypropylene composites modified with SEBS and SEBS-g-MA elastomers. Svab, Iztok; Musil, Vojko; Smit, Ivan; Makarovic, Matjaz Technical report 4600
Modification of epoxy resin by addition of bismaleimide and diallyl phthalate. Shenoy, M.A.; Patil, Mrinalini; Shetty, Aditya Technical report 3757
Photoinitiated crosslinking of Ethylene-vinyl acetate copolymers and characterization of related properties. Yao, Dahong; Qu, Baojun; Wu, Qianghua Technical report 3976
Poly(ethylene terephthalate) nanocomposite fibers with new organomica via in situ intercalation. Jung, Min-Hye; Chang, Jin-Hae; Kim, Jeong-Cheol Technical report 4291
Preparation and properties of benzophenone chromophoric group branched polymer for self-decontamination. Hong, Kyung Hwa; Sun, Gang Technical report 2909
Rheological, mechanical and thermal properties of propylene-ethylene block copolymer/polyalphaolefins blends. Ha, H.S.; Kang, M.C.; Cho, H.H.; Kim, B.K. Technical report 3132
Slow crack growth-notches-pressurized polyethylene pipes. Brown, Norman Technical report 3771
Synergistic effects of expandable graphite with magnesium hydroxide on the flame retardancy and thermal properties of polypropylene. Chen, Xiaolang; Wu, Hong; Luo, Zhu; Yang, Bo; Guo, Shaoyun; Yu, Jie Technical report 3368
The effect of nanoclays on the nucleation, crystallization, and melting mechanisms of isotactic polypropylene. Medellin-Rodriguez, F.J.; Mata-Padilla, J.M.; Hsiao, B.S.; Waldo-Mendoza, M.A.; Ramirez-Vargas, E.; Technical report 4371
Thermal and mechanical degradation during polymer extrusion processing. Capone, C.; Di Landro, L.; Inzoli, F.; Penco, M.; Sartore, L. Technical report 3843
Ultrasonic measurement of residual wall thickness during gas assisted injection molding. Brown, E.C.; Mulvaney-Johnson, L.; Coates, P.D. Technical report 5993

Terms of use | Privacy policy | Copyright © 2020 Farlex, Inc. | Feedback | For webmasters