Printer Friendly

Articles from Polymer Engineering and Science (January 1, 2003)

1-22 out of 22 article(s)
Title Author Type Words
A study of the effect of surfactants on the properties of polystyrene-montmorillonite nanocomposites. Xie, Wei; Hwu, Jyh Ming; Jiang, George J.; Buthelezi, Thandi M.; Pan, Wei-Ping 3484
A study of the stick-slip phenomenon in single-screw extrusion of linear polyethylene. Kay, D.; Carreau, P.J.; Lafleur, P.G.; Robert, L.; Vergnes, B. 5495
Analysis of closed-discharge single-screw extrusion of power-law fluids. Guzman, Job D.; Schieber, Jay D. 3021
Application of ultrasound in the determination of fundamental extrusion performance: residence time distribution measurement. Sun, Z.; Jen, C.-K.; Shih, C.-K.; Denelsbeck, D.A. 3370
Dynamic mechanical signatures of Viton A and plastic bonded explosives based on this polymer *. Hoffman, D. Mark 8268
Effect of process conditions on the weld-line strength and microstructure of microcellular injection molded parts. Turng, Lih-sheng; Kharbas, Hrishikesh 5100
Effect of reactive compatibilization on the interfacial slip in nylon-6/EPR blends. Puyvelde, P. Van; Oommen, Z.; Koets, P.; Groeninckx, G.; Moldenaers, P.; Leuven, K.U.; Eindhoven, T. 2913
Essential work of fracture of polypropylene and polypropylene blends over a wide range of test speeds. Grein, C.; Plummer, C.J.G.; Germain, Y.; Kausch, H.-H.; Beguelin, P. 4647
Impact behavior and modeling of engineering polymers. Duan, Y.; Saigal, A.; Greif, R.; Zimmerman, M.A. 5169
Industrial solidification processes in polybutene-1. Part I-quiescent melts. Braun, J.; Pillichshammer, D.; Eder, G.; Janeschitz-Kriegl, H. 4465
Industrial solidification processes in polybutene-1. Part II-influence of shear flow. Braun, J.; Wippel, H.; Eder, G.; Janeschitz-Kriegl, H. 7467
Investigation of the rheological and mechanical properties of a polystyrene-polyisobutylene-polystyrene triblock copolymer and its blends with polystyrene. Antony, Prince; Puskas, Judit E. 3787
Modification of recycled high-density polyethylene by low-density and linear-low-density polyethylenes +. Kukaleva, N.; Simon, G.P.; Kosior, E. 6304
Novel ultrasonic process for in-situ copolymer formation and compatibilization of immiscible polymers. Isayev, A.I.; Hong, Chang Kook 4046
Numerical simulation of the flow in an Extensional Flow Mixer. Effect of fluid elasticity on the flow. Tanoue, Shuichi; Iemoto, Yoshiyuki 4095
Nylon 10 10--montmorillonite nanocomposite made by intercalating polymerization. Zhang, Guosheng; Li, Yongjin; Yan, Deyue; Xu, Youyong 2732
Primary structure and physical properties of poly(ethylene terephthalate)/poly(ethylene naphthalate) resin blends. Maruhashi, Yoshitsugu Brief Article 4994
Properties of rapid prototype injection mold tooling materials. Rodet, Vincent; Colton, Jonathan S. 6788
Residual birefringence in modified polycarbonates. Wimberger-Friedl, R.; de Bruin, J.G.; Schoo, H.F.M. 4607
Selectivity of peroxide-initiated graft modification of ethylene copolymers. Parent, J. Scott; Tripp, Michael; Dupont, John 4408
The importance of timely polymer sintering while processing polypropylene foams in rotational molding. Pop-Iliev, Remon; Rizvi, Ghaus M.; Park, Chul B. 5964
The thickness profile of ultra-high molecular weight polyethylene films during sequential biaxial drawing. Moens, M.T.R.; Govaert, L.E.; Peters, G.W.M.; Meijer, H.E.H. 6102

Terms of use | Privacy policy | Copyright © 2022 Farlex, Inc. | Feedback | For webmasters |