Printer Friendly

Articles from Polymer Engineering and Science (July 1, 1998)

1-18 out of 18 article(s)
Title Author Type Words
An experimental comparison of cooling time for cylindrical plastic components using heat conduction models in the non-conservative and conservative forms. Dubay, Rickey; Bell, Adam C. 4676
An experimental study on the effect of polymer viscoelasticity on layer rearrangement in coextruded structures. Dooley, Joseph; Hyun, Kun Sup; Hughes, Kevin 3736
Comparison of oxidation induction time measurements with values derived from oxidation induction temperature measurements for EPDM and XLPE polymers. Mason, L.R.; Reynolds, A.B. 2350
Crystallization kinetics. Nieh, Jenn-Yeu; Lee, L. James 6573
Determination of the degree of fill in a counter-rotating twin screw extruder. Goot, A.J. van der; Poorter, O.; Janssen, L.P.B.M. 2573
Effects of pressure sensitivity and notch geometry on notch-tip fields. Al-Abduljabbar, A.; Pan, J. 4075
Effects of surface modification by Ar+ irradiation on wettability of surfaces of poly(ethylene terephthalate) films. Park, Sung-Chul; Koh, Seok-Keun; Pae, Kook D. 4966
Extrusion of PE/PS blends with supercritical carbon dioxide. Lee, Minhee; Tzoganakis, Costas; Park, Chul B. 4189
Grooved feed single screw extruders - improving productivity and reducing viscous heating effects. Davis, Bruce A.; Gramann, Paul J.; Noriega E., Maria del P.; Osswald, Tim A. 2386
In memoriam: Joseph A. Biesenberger, 1935-1998. Gogos, Costas Obituary 671
Modeling warpage in reinforced polymer disks. Fahy, E.J. 8555
Numerical simulation of multi-layer flow for polymer melts - a study of the effect of viscoelasticity on interface shape of polymers within dies. Matsunaga, K.; Kajiwara, T.; Funatsu, K. 4086
Prediction of equilibrium polymer blend morphology in dispersed two-phase flow and comparison with experiment. Han, Chang Dae; Sun, Junsuo; Chuang, Hsiao-Ken; Lee, Je Kyun 6046
Process simulation. Nieh, Jenn-Yeu; Ni, Jun; Lee, L. James 3380
Processing and characterization of microcellular foamed high-density polyethylene/isotactic polypropylene blends. Doroudiani, Saeed; Park, Chul B.; Kortschot, Mark T. 6027
Rheological properties of fumed silica filled Bis-GMA dispersions. Kim, Sangwoo; Jang, Jyongsik; Kim, Ohyoung 3387
The cause of the grey discoloration of PET prepared by the use of antimony-catalysts. Aharoni, Shaul M. 7496
The effect of surface tension on extrudate swell from square and rectangular channels. Gifford, W.A. 3608

Terms of use | Privacy policy | Copyright © 2022 Farlex, Inc. | Feedback | For webmasters |