Printer Friendly

Planetary explorer.

The Tri-Ten planetary head deburring system has been expanded to include a return-to-operator configuration. It is designed to deburr both sides of a part in a single pass, and for applications requiring a small footprint and portability. Parts are loaded at one end and a magnetic conveyor passes them through an offset planetary deburring head where three fiber abrasive brushes deburr the upward-facing surface. The conveyor carries the part to a mechanism that flips it to a parallel magnetized conveyor that transports the part back through the planetary head and deposits it at an opening next to the entrance. It deburrs both sides of "green" powder metal parts. Abtex Corp., Booth1262

[ILLUSTRATION OMITTED]

www.rsleads.com/905mn-174
COPYRIGHT 2009 Nelson Publishing
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2009 Gale, Cengage Learning. All rights reserved.

Article Details
Printer friendly Cite/link Email Feedback
Title Annotation:EASTEC SHOW PREVIEW
Publication:Modern Applications News
Date:May 1, 2009
Words:117
Previous Article:Chilling out with an EDM.
Next Article:This insert is a CINCH.

Terms of use | Privacy policy | Copyright © 2020 Farlex, Inc. | Feedback | For webmasters