Printer Friendly

Pin problems?

If your tank suddenly loses throttle control and the FUEL CONTROL FAULTY caution light comes on during operation, don't panic.

The problem could be something as simple as an electromechanical fuel system (EMFS) connector pin, NSN 5315-01-205-8647, that's vibrated loose and fallen out.

Before calling for a tow, try shining a flashlight into the engine compartment. Most of the time the pin ends up in the small cupped area under the EMFS. If you find the pin, slip it back into place and you're good to go.

Just make sure your mechanic replaces the pin when you get back to the motor pool. The next time it falls out, you might not find it.
COPYRIGHT 2005 PS Magazine
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2005, Gale Group. All rights reserved. Gale Group is a Thomson Corporation Company.

Article Details
Printer friendly Cite/link Email Feedback
Title Annotation:M1-Series Tanks ...
Publication:PS, the Preventive Maintenance Monthly
Article Type:Brief Article
Geographic Code:1USA
Date:Feb 1, 2005
Words:114
Previous Article:Start up and shut down right.
Next Article:Stop plugging ahead.
Topics:


Related Articles
Pump up your tank.
Out of your depth.
Here's mud in your eye!
Squelch that squeak!
Get pushy with loose hardware.
Inspect MRS twice a year.
Out with the old.
Broken STE-M1/FVS is a dead end.

Terms of use | Privacy policy | Copyright © 2022 Farlex, Inc. | Feedback | For webmasters |