Printer Friendly

Optical molasses: atoms in the deep freeze.

Optical Molasses: Atoms in the Deep Freeze

A gas of free atoms can get a lot colder than anyone had thought, according to recent experiments using lasers to cool atoms. Careful measurements show that such laser systems can slow down sodium atoms to produce a gas with a temperature of roughly 43 microkelvins, a fraction of a degree above absolute zero. This temperature is well below the theoretical cooling limit of 240 microkelvins predicted for laser cooling.

"We believe that we have produced the coldest [three-dimensional] gas ever observed," William D. Phillips of the National Bureau of Standards (NBS) in Gaithersburg, Md., and his colleagues report in the July 11 PHYSICAL REVIEW LETTERS. Lower temperatures have been achieved only among atoms confined to a narrow, essentially one-dimensional beam.

The results also indicate that the generally accepted theory of laser cooling is faulty and must be modified. "We were astounded by these results because the cooling limit is something that has been accepted as applying to the kinds of systems that we were studying," Phillips says. Research groups at Stanford and the University of Colorado and in Paris have now confirmed the NBS findings.

Laser cooling begins with the firing of precisely tuned laser light into the face of an onrushing beam of sodium atoms. For each photon of laser light absorbed, the atoms slow down by a certain amount (SN: 3/23/85, p.183). After the atoms have been slowed sufficiently, they are moved into a region of "optical molasses." Here, six crisscrossing laser beams create an environment that makes the sodium atoms behave as if they were suspended in a viscous fluid, in effect confining the sodium atoms for a time (SN: 6/21/86, p.388). In a typical experiment, the optical molasses has a volume of 1 cubic centimeter and contains about 10 million atoms moving at an average speed of 10 centimeters per second, a five-thousandth of their speed at room temperature.

Theory predicts that the gas temperature achieved depends on a balance between the cooling effect of the laser beams and the heating produced by the emission of photons from the atoms. This balance sets the cooling limit. Early experiments by the NBS team and other groups produced temperatures very near the predicted cooling limit.

"This is always a danger when making measurements," Phillips says. "There are lots of things that can affect the accuracy of your measurements, and you tend to look harder for them when you're not getting the answer you expect. In this case, it was initially satisfying to get the same result that everybody else was getting and the one that was predicted by theory. For a little while, it escaped our attention that there was something really fishy going on."

But the researchers observed enough inconsistencies in subsequent results that they decided to try the experiments again with improved temperature measurements and a more detailed look at the effect of subtle shifts in laser frequency. That led to the observation of atoms at 43 microkelvins and suggested that the theory of laser cooling had to be revised.

Steven Chu of Stanford University and a group at the Ecole Normale Superieure in Paris have independently come up with similar explanations for the NBS results. The original theory assumed laser cooling was associated with a simple transition between two different energy levels in a sodium atom. In reality, these energy levels can split into sublevels in the presence of a magnetic field or a laser-induced electric field. Because the electric field within the optical molases is not uniform, atoms moving about encounter varying electric fields and interact in a complex way with the laser beams. As a consequence, the atoms are slowed down more than expected.

"it's a new way of cooling that had not been anticipated in any theory," Chu says.

"At this point, those explanations need to be viewed as preliminary but very promising," says Phillips. "They seem to explain most of the features of the results that we see. But I'll be a lot more satisfied when they predict something that we haven't measured yet. Then we can measure it to see if, in fact, that's the case."

In laser-cooling applications such as atomic spectroscopy or the study of low-energy atomic collisions, the colder the atoms, the better. "Optical molasses is the standard starting point for just about anyone's laser-cooling experiments," says Chu. "Now we have a better [lower-temperature] starting point."
COPYRIGHT 1988 Science Service, Inc.
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 1988, Gale Group. All rights reserved. Gale Group is a Thomson Corporation Company.

Article Details
Printer friendly Cite/link Email Feedback
Title Annotation:experiments with laser cooling
Author:Peterson, Ivars
Publication:Science News
Date:Jul 23, 1988
Words:743
Previous Article:The muscular machinery of tentacles, trunks and tongues: scientists discover a new way for muscles to work.
Next Article:A radical role for dietary fish oils.
Topics:


Related Articles
Laser cooling made simpler, cheaper.
Disorderly light: solid-state physics offers new insights to classical optics.
Laser spotlight pinpoints atoms in motion.
Using light to focus chilled chromium atoms.
Optical refrigeration proves really cool.
Taking atoms for a tunnel-of-light ride.
Laser reaction control in hot sodium vapor.
Ultracold atoms: new gravity yardstick?
Laser may twirl molecules to pieces.
Hot flashes, cold cuts: ultrafast lasers give power tools a new edge.

Terms of use | Copyright © 2016 Farlex, Inc. | Feedback | For webmasters